@@amihirata haha try looking for those eBay stores that sell liquidated company assets. I live real far from the US but used a shipment forwarding company to get it for me from the US because yes, the maxiprox IS really expensive. And to be completely honest, I haven't found ridiculously great results with it either. One main thing about it is that it seems to not read EM4xxx tags for example. It pretty much only sees HIDPROX and T55xx tags which actually emulate the hid prox. My advice? Get an AliExpress reader that understands both and you're likely better off than you would be with a maxiprox. But you will not likely get a massive range but you could always "accidentally bump into someone" *wink wink*

@@amihirata on average about 22-23 inches (60cm approx with the non-murrican units we use). Honestly not worth the difference in price.

Sami Ghouri , is there a way I can contact you? I just wanna ask couple of questions about the cards and stuff.

Sami ? How can I get a hold of you id appreciate it

I really liked your program, how can I contact you?

That's definitely a good idea. I think this video is great if a person had to do this on the fly. It's basic simple and fast. So you both have great ideas. 🖒👏👏

It looked like the back of that reader used epoxy for embedding. That would make it a little harder to get to the buzzer to be able to the turn it on and off. I'm wondering how hard it would be to build the electronics into a small module so that just the antenna is that big. Then build the antenna into something less obviously a big square reader. If you are stopped and someone looks inside your messenger bag explaining a hunt pad away might be tricky, but if they see a small box, lying in the bottom of the bag and the antenna is built into the side walls you might get away with it.

No converters required. The solution presented in the video works relatively well (aside from the fact that it can only read EM410x cards)

If it’s running OSDP, no.

if you're using espkey it's already built to replay whatever Wiegand data was captured. If you use the espkey inside an actual production reader, then it would open the door. If you have a mobile reader, then you would take that data and make copies with a writer (as MaxiProx is JUST A READER). There's tons of China write for $5-10 bucks available once you know the frequency and card needed (or just get a t5577 if LF). Or if you want to be expensive, get one of those flipper devices. If you want to learn more about RFID in general, then get a proxmark3.

@@amihirata can the maxiprox give u credit card info for track 1 and 2 to make a duplicate card

Hopefully you can do a video on the Maxiprox 5375 because unfortunately that doesnt come with a harness at all just a bunch of multiport connectors for a bunch of different configurations I'm sure it would help a bunch of people out

Which scanner is more suitable to capture credit card info

Found a link to HID product. $520. If you were a pro red teamer, thats actually affordable! www.amazon.com/HID-MaxiProx-125kHz-Proximity-5375AGN00/dp/B002I15F90/

🤣🤣🤣

Bro how you get the actual card info?

@@ai.1400 you gotta look for the teachers card get close too it without being caught and scan it and I’m sure whenever it’s done it will be on there

@@ai.1400 with the info in the video, with googling RFID and educating yourself. Stop looking for handouts and put some work in. It's easy to get the info. You must not have understood a damn thing in the video, all went over your head. Stay in school.

lmk if u find out🥸

The antenna needs to fit the application. An antenna for 125kHz RFID won't work since it has a very different resonance frequency.

Hi, I just posted roughly the same question, but I checked out another one of his great vids……192.168.4.1 so I believe it’s the site for the ESPkey8266 ( but don’t quote me on this) I should have all the stuff by Thursday and completely set to go. I used the links for the gear so hope he gets a bit back from the links. Hope this helps? 😎

@@honorvirtue2904 have you been successful?

no, unless you wanna spend alot of money

Yes you can, you have been granted the ability. Anything is possible.

did you fry the reader yet?

hes not gonna tell us unfortunately . lmk if u find out

read the espkey and that reader's documentation, your answer is there.

Yes absolutely but that’s NFC and this is 125khz RFID

@@cedricvillani8502 how can I get it to read NFC

@@mansamusa3677bro did you find a reader?

Look at the links in the description of the video

like a rechargeable one?

That's called a punch-down tool, a tool we use in IT for creating cables (usually cat5). Your welcome. PS may I suggest studying for the A+, Network+, and then Security+ certification from Comptia? You will learn a lot about all these things and not look like a script kiddy. Knowledge is power. (that and/or going to College for Computer Science).

@@mr.s1961 I have security+ and pentest+ from comptia working on my network+ rn actually

You'll have to migrate to UHF. rfid stickers cant really broadcast that far, no matter how much power you put into it.

Social Engineering = BlackJack + Scan lulz

The ESPKey has built in wifi on it, You connect to it with your smartphone. When you pull up an internet browser you can go to its default IP address and the ESPkey interface will appear.

@@amihirata so the ESPkey will come with its own IP address and I simply just type it in the address bar on my browser and i will see any cards that have been read by the reader?

@@timmytuck5797 Yes as long as you are connected to its local wifi.

@@amihirata hey I need help with this part

Did it?

Okay thief

Wondering the same thing

the esp key has a wifi of its own, you connect to it via that wifi and then you get thr info

this comment didn't age well. I wish YT let you delete low-effort and useless posts, because people aren't responsible like that.

nope. lol

yea, ofcourse you lost ur wallet with a card

So it don’t work on credit cards ?😢

Heh, forreal. I consider having that skill down absolutely indispensable despite the fact I consider it thoroughly tedious & look forward to just being done with whatever needs soldering at this point. I'd rather be welding every time! hahaha

Thank God

BTW nice tutorial what Information Can i Areal from the cards shown ?

what?

Nothing, it cannot read credit card credential technologies

NFC isn’t 125khz RFID. You’re CC is NFC

@@amihirata so it can’t read credit cards

P🐀🐀😑

lol no

Well you can cook this project up in a microwave but it will take a lot longer and won’t work