#199
Переглядів 236,898
6 років томуWhich are the essential tools in a lab? Which one do I use and how am I organized? A video for all which are curious about how it looks behind the camera. Maybe you discover something you can use for your own work?
This is also my first "real" appearance on UKposts. I thought it is time after 200 videos...
Links:
Wire Strippers: s.click.aliexpress.com/e/aQb2rNv
Equipment in my lab: www.sensorsiot.org/my-lab/
Empty Dupont shells: bit.ly/2jy35HY or s.click.aliexpress.com/e/IuvNrFq
Crimper: ebay.to/2HT0F0T
Breadboards: s.click.aliexpress.com/e/UzRzBqJ or bit.ly/2jyGr24
Black hot glue: s.click.aliexpress.com/e/VZVjyzn
ESP32 board with USB-A connector: s.click.aliexpress.com/e/_DlI...
The Art of Electronics: amzn.to/2JScLrR
Troubleshooting Analog Circuits: amzn.to/2roqQWn
Skunkworks: amzn.to/2KBh2AW
The Goal: amzn.to/2KD6SQp
The Soul of a New Machine: amzn.to/2HYuzkx
Making of the Atomic Bomb: amzn.to/2jv7TO9
The Heart of the Enterprise: amzn.to/2rm6mxx
The Ultimate Entrepreneur: amzn.to/3OJBnqU
Assortments: bit.ly/2jvFSG4
Kapton Tape: s.click.aliexpress.com/e/aeUJun6
YAT: bit.ly/2rm765N
Notepad++: notepad-plus-plus.org/
ESP32 board with big USB connector: bit.ly/2q0kMpH
ESP8266 Breadboard: s.click.aliexpress.com/e/UrBMByj
ESP8266 board: s.click.aliexpress.com/e/7iMVfI6 or bit.ly/2jvIrba
Trinocular: FyScope 3.5X-90X s.click.aliexpress.com/e/3Zvr3vN
Supporting Material and Blog Page: www.sensorsiot.org
Github: www.github.com/sensorsiot
My Patreon Page: / andreasspiess
My Bitcoin address: 19FSmqbBzb5zsYB1d8Bq4KbxVmezToDNTV
If you want to support the channel, please use the links below to start your shopping. No additional charges for you, but I get a commission (of your purchases the next 24 hours) to buy new stuff for the channel
For Banggood bit.ly/2jAQEf4
For AliExpress: bit.ly/2B0yTLL
For ebay.com: ebay.to/2DuYXBp
profile.php?...
/ spiessa
www.instructables.com/member/...
Please do not try to Email me or invite me on LinkedIn. These communication channels are reserved for my primary job
Equipment in my lab: www.sensorsiot.org/my-lab/
@arduinoversusevil2025 6 років тому
White Glove tour through Herr Spiess' drawers? YES, PLEASE!
@AndreasSpiess 6 років тому
What kind of secrets would you expect? Most probably you would be disappointed ;-) I would like to see you lab-tour. Yours must be much more interesting. Or did I miss it?
@EL90291 5 років тому
We need to see an Ave + Andreas Spiess project !!!
@kevinclementi5970 5 років тому
Ave uncle bumblefuck always on the best videos
@electronichome1153 3 роки тому
If you don't have at least two-three type of gloves in your lab, you obviously need to improve your knowledge and working environment. What is presented here is not a "Swiss mentality" at work, but it is a proper mentality at work. You don't have to be Swiss to work properly, because everyone can acquire useful practices and habits. This increases efficiency and reduces risk. Excellent example from Mr. Spiess IMO.
@rfmonkey4942 3 роки тому
Ja wuhndabar !
@leozendo3500 6 років тому
live longer than that table plz.
@DafyddRoche 6 років тому
"It is packed with a lot of uneccesary equipment, according to my wife" --- My garage/lab is described in EXACTLY the same way. :)
@AndreasSpiess 6 років тому
Maybe they are sisters and we do not know ;-)
@TishSerg Рік тому
@@AndreasSpiess no, they're just women
@RoadRunnerMeep 3 роки тому
One of my favourite layouts, it's a shame people don't do more lab tours. No matter how rubbish they think their setup is, I find it useful for ideas on building my own figuring out what works and what doesn't
@AndreasSpiess 3 роки тому
Thank you. Usually those videos are not too successful. Maybe this is the reason.
@Epsteindidnt 5 років тому
Thank you for your channel and the risk of going into making a business of it. I have learned a significant amount from you and you saved me money avoiding behaviours and also by not purchasing and testing items that I need not to as you have done the work. I live in a highrise and my workshop (room) is on the 28th floor so my set up is a little different mostly the view that I usually block to concentrate, only to find that it is 9pm by the time I realise another day has gone. Also, great to see you sneak in a little humour as well to make the subjects enjoyable as well as sensible and solid content. Thanks and take care.
@AndreasSpiess 5 років тому
Thank you for your nice words!
@RubenLensvelt 6 років тому
I knew your channel would grow so big since a long time, but 70.000 is still impressive. Congratulations! You've earned it :)
@AndreasSpiess 6 років тому
Thank you for your longtime support!
@billyjoe3309 2 роки тому
You are such a wonderful person Andreas. Well dressed, humble, kind and extreamly nowledgeable. If wish I had you as a teacher in school, then I would have actually attended class. Instead I quit school. I've learned much more from UKposts and from testing things in life. Keep up your glorious work!
@AndreasSpiess 2 роки тому
Thank you for your kind words!
@AhCup 6 років тому
I still remember I find this channel when I was searching for how to make Dupoint wires. Your video was one of the best to explain it to beginner. Thank you for your videos.
@AndreasSpiess 6 років тому
You are welcome. These old tricks still simplify my life ;-)
@TishSerg Рік тому
I found this channel while searching which one of many available variants of ESP32 boards to buy. The (numbered) video about that topic was recommended by quite a few people in the comments section.
@ReynaldoJAbreuR74 6 років тому
Andreas, you're doing an incredible job here and quite pioneering in terms of UKposts content. You're showing the practicalities of maker work, and providing invaluable insight that doubtless took years of experience to gather - and here we are, gobbling it up for free. For that myself (and many others, I fathom) are very grateful. Keep it up!
@AndreasSpiess 6 років тому
You are welcome! It is a pleasure for me.
@Daniel_Lemire 6 років тому
Andreas, thanks for sharing all about your maker lab and setup. Thanks too for sharing The Goal by Dr Goldratt with your audience... truly life changing stuff there to learn. You packed a great deal into this weeks video. Thanks for being such a great contributor, and sharing what you know with others!
@AndreasSpiess 6 років тому
I do not remember how often I gave one of these books to colleagues....
@bardenegri21 6 років тому
It's so good to have a space for yourself and your (now) hobby. Great video as always, I was quite curious about a few things and they were all covered here. Thank you!
@AndreasSpiess 6 років тому
Glad you found what you were searching for. I had a few questions over time and thought, the 200th video would be a good occasion to answer some of them.
@garyfry7292 3 роки тому
Thank you Andreas. I really appreciate you spending time to make your videos! I've been seeing your work for a while now. Keep going!
@AndreasSpiess 3 роки тому
You are very welcome!
@wassfila 6 років тому
Great video !!!!! Almost describing my lab with a lot of hints for improvements.
@AndreasSpiess 6 років тому
Thank you!
@northshorepx 6 років тому
"Soul of the new machine" - the book that made software and hardware design come alive for me. I read it at uni back in 86 and I recommend it to all too.
@AndreasSpiess 6 років тому
:-)
@RAL2010 6 років тому
"Not everything worth doing is worth doing well."
@dosgos 6 років тому
Some of my family worked at Data General at the time. They said the book was a very accurate description of the culture during the early days. The employees never figured how the author got it so right. Of course the book only had space to focus on a few people, but industry knew DG was full of top-tier, very hungry engineers.
@ko-Daegu 6 років тому
northshorepx But it sounds old do you still recommend it though ???
@RAL2010 6 років тому
If you want to learn to build your own computer, don't read it, not even back in the 80's. Otherwise, it is a very compelling read, take a look: books.google.nl/books?id=oRg3AQAAQBAJ&printsec=frontcover&dq=The+Soul+of+A+New+Machine&hl=en&sa=X&ved=0ahUKEwjD-orps_PaAhXQsKQKHWIVDzoQ6AEIKTAA#v=onepage&q=The%20Soul%20of%20A%20New%20Machine&f=false
@JasonCarlson 6 років тому
Great display of assets and a spectacular character using them. I always look forward to your videos and your wit. Thank you for your time and efforts.
@AndreasSpiess 6 років тому
Thank you for your nice words!
@DennisMurphey 2 роки тому
OMG! I and my wife watched your video in awe. I am so stunned. I have Soul of a Machine and Skunk Works too! Ken Olden was my Hero CEO. Now the drawers were just awesome. I have plastic boxes but each one a different shape and size. Nothing stacks or is visible. I i have to search by opening them up. Nothing is sorted 100%. I have so mych work to do but you gave me a model to follow or at least begin with. Thank You so much. I build Model Trains. And I 3D print train parts I have dremels and will grind anywhere so chip fly all over Not Good. I just started ESP32 and ESP 8266 development to control train engines and smoke and sounds. I had OctoPi on my printer and a One 31 inch monitor for design. But i also have a demo and test station for assembled chassis of trains. So actually more table tops but less work space some how. I am so encouraged. Thank You, Dennis & Margaret in Virginia
@AndreasSpiess 2 роки тому
Glad you liked my setup! Do you know this channel by chance: ukposts.info It is also made by a Swiss and combines your two hobbies (Trains and ESP32)
@ArcanePath360 6 років тому
Thanks for the insight. I never knew you could get black hot glue
@Ed19601 6 років тому
ArcanePath360 me neither: m.aliexpress.com/wholesale/black-hot-glue-sticks.html
@AndreasSpiess 6 років тому
You even get other colors for Christmas decoration
@anlumo1 6 років тому
I recently ordered glitter hot glue: www.aliexpress.com/item/10pcs-set-Mix-Color-Glitter-Hot-Melt-Glue-Stick-Adhesive-Sticks-Kit-Craft-Attaching-For-Electric/32795491560.html Unfortunately, it hasn't arrived yet, though.
@ArcanePath360 6 років тому
I'm guessing all these additives take away the strength of the glue. Usually I just spray paint over it if I need to blend it in with anything so I probably will never buy coloured hot glue.
@deangreenhough3479 6 років тому
Me either😀😀😀😀😀, but I’m defiantly getting some and another glue gun 👍
@proyectosledar 6 років тому
Thanks!
@AndreasSpiess 6 років тому
:-)
@markcoren2842 4 роки тому
The Goal is the most important book I ever read for business. I used those lessons for 15 years as an operations consultant. I highly recommend it as must-read material!
@AndreasSpiess 4 роки тому
I completely agree. I gave many books away to young people.
@tornadokat 6 років тому
Perfect timing! I have been watching your videos for a while (thank you for doing them!) and started experimenting with various wireless modules as well. I just started thinking about how my desk wasn't working as I keep adding parts and tools. This gave me some good ideas to modify for myself.
@AndreasSpiess 6 років тому
So you are on the same track as me. Maybe I started a little earlier...
@JimSteinbrecher 6 років тому
i suggest having a look at "sortimo t-boxx" boxes (they also make cabinets with rails, for multiple boxes) or, if you want a cheaper alternative, "allit europlus" boxes (you need to make the cabinet yourself). they are a great combination of carrying case and parts bin (the lid has ridges that keep the bins in place and prevent the components from mixing). you can use them for specific parts, or 1 box per project.
@AndreasSpiess 6 років тому
Thank you for your suggestions. They look very professional and very flexible, but also a little more expensive compared with mine (at least the second choice). But they are available even in Switzerland which is an advantage.
@JimSteinbrecher 6 років тому
yes, the allit boxes are about 2x or 3x the price of the ikea samla boxes (the sortimo ones are even more expensive), and they are much smaller, but the advantage is the small bins that can be taken out individually. they also make a "double" model with a carry handle, i have one of these in the car: www.sichtboxen.com/allit-457236-sortimentskasten-europlus-duo-flex-37-28.html not as good quality as sortimo, but much cheaper.
@p_mouse8676 6 років тому
I used to have quite a big lab myself, but recently I have been on the way of being minimalistic. So only have a few assortments, mostly just order parts when I really need them. Most people don't realise you don't need much and in fact you can do most by thought experiments and simulating parts. On a personal level it gave me a lot more rest.
@norm1124 6 років тому
Piet Muijs How do you simulate the parts?
@p_mouse8676 6 років тому
There are software simulation tools. Important is that you don't simulate the entire circuit, but parts of it
@AndreasSpiess 6 років тому
Maybe it also has to do with the character. I like to touch things ;-)
@dave_dennis 3 роки тому
Very helpful. I was amazed at how much this looks like my work area. Many of the tips are things I’ve already discovered myself. Thank you!
@AndreasSpiess 3 роки тому
Fantastic! So you are also a happy man like me.
@jackr.thomas6098 6 років тому
I am starting a makers' lab and found this video incredibly helpful. Thanks! Please make more such videos to further acquaint us with the workings of your amazing lab. Bravo!
@AndreasSpiess 6 років тому
Thank you for your nice words!
@Jones12ax7 6 років тому
Here in Brazil we know Swiss as country that do top quality stuff, like the pocket knifes and watches. It would not be different with someone with electronics hobby! Very nice place, thanks for sharing with us!
@AndreasSpiess 6 років тому
You are welcome!
@rofo88 6 років тому
I use alcohol every day too 🍻
@northshorepx 6 років тому
That cracked me up too :-)
@AndreasSpiess 6 років тому
:-))
@IvanIvan1974 6 років тому
Great one
@norm1124 6 років тому
Try a famous Swiss 🇨🇭 wine "Fendant" and you will use less 🙊
@nicholasroos3627 6 років тому
Not a fan of brain melting hangovers?
@billkitto 6 років тому
Hi Andreas Of all of the many videos you have produced that I have watched I found this the most useful. Now to set up something similar!
@AndreasSpiess 6 років тому
Enjoy the setup!
@iagocasabiellgonzalez7807 5 років тому
Your channel is a pure gold nugget on the internet. Thank you!
@AndreasSpiess 5 років тому
You are welcome!
@muctop17 6 років тому
It is all your fault! You showed me, how to order cheap electronics from china. So I spent lots of money buing all these things. Recently the N1201SA vector analyzer ! But not my Rigol scope, this was Dave Jones fault ! Good luck and lots of fun with next 200 vids. Thank you Andreas, 73 !
@AndreasSpiess 6 років тому
It is always good to have somebody else who is guilty ;-) Makes life easier! Enjoy your new vector analyzer!
@kissingfrogs 6 років тому
I tell my wife, its not me, its these enablers on youtube that made me buy it.
@norm1124 6 років тому
Step 1: "Establish a clear line of blame" ...
@tchristell 6 років тому
And a good line of credit.
@belenhedderich3330 6 років тому
You should appear more and also Mishka
@AndreasSpiess 6 років тому
We call her "Dishka", which seems to mean "Mouse" in its proper language. I am a little ashamed of that name for a cat. But we did not choose. She came from an asylum.
@belenhedderich3330 6 років тому
Don't be Ashamed she seems to be a well taken care cat. She even has an automatic feeder! LOL. Kudos to you too to have her adopted I got 2 dogs myself adopted one from a Shelter and one from the streets directly ;)
@michaels3003 5 років тому
Andreas Spiess , I didn't know that cats knew their names 😼
@gtburhan 6 років тому
Thanks for sharing your lab setup with us, very inspiring and I love your videos, keep up the good work! Best regards, Gamal
@AndreasSpiess 6 років тому
Thank you!
@jenskapmeyer2579 4 роки тому
Hi Andreas, after having seen a lot of your videos, where I admire your high level engineering efforts, it was very interesting to see your lab, practical and “bodenständig“! Thanks a lot.
@AndreasSpiess 4 роки тому
You are welcome!
@lasersbee 6 років тому
I'm curious and am sure as a lot of other subscribers are... 2:17... You always seem to be wearing white woven gloves when working on electronics. You had states once that it was a personal reason... Yet at 1:14 and 1:17 and 14:28 we can easily see your hands and they look just fine. So why the need for the white gloves ??
@vivekvenkatsubramaniam437 6 років тому
lasersbee To avoid dirtying hands/static, maybe?
@lasersbee 6 років тому
Vivek Venkat Subramaniam ... Nitrile gloves would make makes more sense and have better dexterity.
@lasersbee 6 років тому
jk44 v2... There is something about Y/T channels not being transparent or responding to valid questions... Just saying
@lasersbee 6 років тому
jk44 v2... Thanks for the additional info. Hmmm Nail Clippers come to mind... ;) I understand that 70k subscribers are a lot... but not all 70k subs leave a comment. It is quite easy to disable comments if it was overwhelming for him to answer questions. Seems like he won't respond to this one if the fingernail thing is the actual thing. Have a great day.
@AndreasSpiess 6 років тому
You can watch my channel update around the last Christmas if you are interested
@Javier_Corado 6 років тому
Love every video you made, you are humble, easy going and really wise. Keep on with the good material
@AndreasSpiess 6 років тому
Thank you for your nice words!
@robertcameronjones 3 роки тому
What a pleasure this was to watch. Thank you - you are a true craftsman.
@AndreasSpiess 3 роки тому
Thank you!
@hexinli 6 років тому
Nicely done! I really enjoyed watching the "back story" and your book recommendations are spot-on :)
@AndreasSpiess 6 років тому
Thank you!
@subratadey 6 років тому
You are one of my fav channel on DIY electronics and i am really thankful to you for sharing such wonderful videos. Please keep up the good work :)
@AndreasSpiess 6 років тому
Thank you for your feedback!
@jimsnodgrass8454 6 років тому
Wow , very impressive lab.. I do appreciate all the tips ..I plan to re-watch it a couple times so it all sinks in since it all seems so logical and efficient..
@AndreasSpiess 6 років тому
This is one advantage of UKposts: The know-how is saved and can be used when needed...
@Trailtraveller 6 років тому
Thanks Andreas for the tour behind the screen. Much appreciated.
@AndreasSpiess 6 років тому
You are welcome!
@gutinformiert 6 років тому
Thanks for sharing this video. It gives a good impression of your (hobby-)work. The best idea in my opinion are the empty shells. I am using always them in my projects. The modded shells give stability to the circuit. Keep going your good work!
@AndreasSpiess 6 років тому
Thank you. And you are right with the stability. Single wires have the tendency to fall off. This never happens with multi-pin headers.
@gr3g91 3 роки тому
Watching this two years and 200k subscribers later, love to see the growth in your channel Andreas!
@AndreasSpiess 3 роки тому
Me too ;-) It is mindboggling for me.
@highdesert50 6 років тому
Thank you for sharing your life and lab, Andreas. I recall the DEC PDP-8 was the first computer I 'programmed' in engineering school.
@AndreasSpiess 6 років тому
I also used a PDP-8 at my first work. Then I got a TRS-80 for me alone ;-)
@johanponin1360 6 років тому
Very nice book suggestions. I love the "breakthrough" brought by plastic boxes. It's true that it's so important to have some form of organized space, makes your mind so much lighter.
@AndreasSpiess 6 років тому
Living in an organized mess is alway better than just a mess ;-)
@boblewis5558 6 років тому
Andreas, an old DEC colleague and friend of mine Andy Clark - also ex CERN) used to have ZERO office desk space with HUGE piles of stuff on it. His was one of the most organised "messes" ever. He ALWAYS knew EXACTLY where in the vast piles of stuff (close to 1m high!!) where a particular document or article was ... UNTIL he was told by some bosses to TIDY IT UP and follow the "clear desk" policy. After very reluctantly doing so he had difficulty finding anything. Just goes to show.
@AndreasSpiess 6 років тому
We had a similar person. He was brilliant.
@johanponin1360 6 років тому
I used to go self organized stack, but at one point it became a burden on my brain. Especially pushing from fragile setups were things would get in the way, nothing was flat...
@asangalo 3 роки тому
I think you deserve every subscription and compliment because your videos are in my opinion the best videos in the segment by far! As soon as I can I intend to support you maybe as patron. Congratulations!! (And thank you!)
@AndreasSpiess 3 роки тому
Thank you for your nice words. I am glad you like the channel!
@scottlecomte6511 6 років тому
Hello from Chandler, AZ USA. Thank you for a view into your lab. I enjoy your videos very much.
@AndreasSpiess 6 років тому
Thank you for your feedback!
@stefanschouteden5196 6 років тому
Dear Andreas, as a Belgian guy with a South-African accent, and living in Vienna, I really enjoy your movies! Great to see that there are still professionals around that like to share their hobbies and experiences - free of charge. I am currently discovering my 2nd life of engaging in things that I have always wanted to do... Like so many people, with an engineering education, I never had the chance to pursue my hobby (electrical stuff) in the professional (=work) world. As a result I have been stuck with boring bureaucratic software engineering stuff (read programming) of which you rarely see real benefit added value, at the end of the day, as 90% of programs are designed for useless processes in the first place. As a near-pensioner, and a biking (bicycle fanatic), I plan to engage in an electrical bicycle project - as i have a couple of practical ideas that I want to explore. Please keep up your great movies, as - each one of them have been very useful and fun to watch!...
@AndreasSpiess 6 років тому
So good luck with this new phase of your life. And enjoy building an electric bike. My wife enjoys riding one. Since ten years...
@ricardotabares8771 Рік тому
This was of great use for the lab I am working on, God bless you Andreas Spiess! 🙏 😄💻
@AndreasSpiess Рік тому
Cool. I hope you will get a wonderful lab with lots of projects!
@Sorawutn 3 роки тому
Hi Andreas , Thank you very for taking your time to share you knowlage and idea to setup the Lab . I will keep up your guidance . Regards.
@AndreasSpiess 3 роки тому
You are welcome! Enjoy your hobby.
@zandxbell1137 6 років тому
Always great to see your videos Andreas!
@AndreasSpiess 6 років тому
Thank you!
@KunalGautam 6 років тому
Thank you for sharing :) I have seen people struggling to find a part in their lab. Have to say the lab is neatly arranged.
@AndreasSpiess 6 років тому
You are welcome!
@TheOpticalFreak Рік тому
Great video! 👍😃 I really loved the books you shared and the exploration about the 3D printer! 😊
@AndreasSpiess Рік тому
Thank you!
@JackZimmermann 6 років тому
Nice to see your lab. And especially the book tips! Thanks and keep up the good work!
@AndreasSpiess 6 років тому
You are welcome!
@jeremydiols532 6 років тому
Best electronic lab tour and beginners guide in making one.
@AndreasSpiess 6 років тому
Thank you!
@RichardEricCollins 6 років тому
Excellent work Andreas. The felt on the back of the boards looks to be a great idea. I'll be using that in the future. :)
@AndreasSpiess 6 років тому
Simple and cheap. One sheet can be used for many boards.
@xavierdemers-bouchard2747 11 місяців тому
Thank you for this lovely dose of insight into your work. This is so full of good tips!
@AndreasSpiess 11 місяців тому
Glad you liked it!
@xavierdemers-bouchard2747 11 місяців тому
@@AndreasSpiessI'm not going to lie... I'm fan-girling with two replies from a technical inspiration like you! Ich liebe deinen UKposts-Kanal. ich lerne deutsch, haben sie parallel einen kanal mit videos auf deutsch? Vielen Dank!
@AndreasSpiess 11 місяців тому
@@xavierdemers-bouchard2747 Nein, ich habe keinen deutschsprachigen Kanal 😞
@1foxmark 6 років тому
What a great place! Thanks for the tour.
@AndreasSpiess 6 років тому
You are welcome!
@SwissLord 3 роки тому
I loved the part. Written by Ken Olsen, the founder of DEC, the best compagny I worked for.. I remember this time, as I was sitting in the same compagny and room as you Andreas. Regards Frape
@AndreasSpiess 3 роки тому
I think I know who you are. Initials: F-P. Tsch? Everything ok on your side?
@alvarocoronado5842 5 років тому
This is awesome, thanks Andreas!
@dermothannan9594 6 років тому
"Soul of a new machine" read it when I was a teenager... blast from the past and a classic...
@AndreasSpiess 6 років тому
:-)
@javierunamuno6786 6 років тому
Hi Andreas! What a great book it was "Soul of a new machine" !
@AndreasSpiess 6 років тому
And probably still is. I have to read it once again.
@Kelvinbrook_101 Рік тому
Great job sir.! I'm inspired and more convince to learn electronics by your impressive setup.
@AndreasSpiess Рік тому
Go for it!
@Kelvinbrook_101 Рік тому
Sir I wish to buy a variable power supply and arduino kit set for programing.
@isfk 6 років тому
Thank you for all your work you do.
@AndreasSpiess 6 років тому
You are welcome!
@tobiasschilgen5890 2 роки тому
Awesome insight! Thanks for sharing your lab's features - many of them I recognize compared with my very little lab and I got some additional ideas.. like the binocular. nice.
@AndreasSpiess 2 роки тому
The binocular indeed is one of the most-used instruments in my lab. But I am 65...
@tobiasschilgen5890 2 роки тому
@@AndreasSpiess I have just an architect's desk lamp with an integrated very huge lens which helps me when soldering small components. I'll keep this binocular in mind for later :-) I am 49. ;-)
@systemofapwne 3 роки тому
I basically skipped over almost all the books you showed after you mentioned, they came from a "fromer time". At some glance, I noticed a goldish cover and though: "This must be 'The Art of Electronics'": I got this myself and this is still top notch! It really teaches you a lot for your projects and is still updated from time to time (last revision was like 5 years ago?) - Even though its first release was almost 45 years ago!!!
@AndreasSpiess 3 роки тому
This is for sure a very good book if you are interested in electronics.
@Davvg 4 роки тому
I love your lab- this is like life goals stuff for me
@AndreasSpiess 4 роки тому
Thank you. I am at the end of my professional life. So it seems to fit ;-)
@ariarokoski6449 6 років тому
Andreas, It is not surprise that Your channel is getting more and more subscribers. Your videos are very good: they are explained well, very educational and very professional. Good Job!
@AndreasSpiess 6 років тому
Thank you!
@PhG1961 6 років тому
Again nice Sunday morning entertainment ! Wonderfull overview of you lab. I recognized many parts that I'm using myself, especially the Ikea stuff... The books overview is interessting. I know the feeling of keeping them. I have almost 40 years of Elektors... which to me are more like a treasure. Anyway, you inspired my to speed up the work on my shed in the back yard. Hopefully I'll get it finished by the fall. Btw, the comment/remark of your wife in the beginning of the video, sounds.... so familiar... Good luck and as some other of my favourite UKpostsr often says: 'Stay creative !'
@AndreasSpiess 6 років тому
I really hope you get your shed before the next winter. It is very convenient to have space where you can organize as you want and keep it there...
@kylejames304 6 років тому
Thank you for your videos, youve really helped me on my way to learning in the maker scene. Proud to be a sub.
@AndreasSpiess 6 років тому
You are welcome!
@everuss 6 років тому
Hi Andreas, you've inspired me to get organised in my office / workshop.. Thanks !
@AndreasSpiess 6 років тому
You are welcome!
@trhtpc 6 років тому
I'm just starting my journey with Arduino and other microcontrollers and from the first sight I know that I'm going to visit your channel regularly. Great channel. Thank you sir!
@AndreasSpiess 6 років тому
Thank you. And welcome to the channel.
@Californiansurfer 2 роки тому
Soul of a new machines. That was great book. Yes, the first network.
@AndreasSpiess 2 роки тому
I should read it again!
@webslingerMe90 6 років тому
I was repairing fuel injection equipment in the past buying mechanic tools and equipment. But since I joined an Electric vehicle company, I got to learn a lot of things. Your videos helped me in controlling motors and sensors using arduino. Thanks!
@AndreasSpiess 6 років тому
Glad to read that!. I still own a regular diesel, but the next seems to be an electric car, too...
@777wsu 6 років тому
We love you Herr Andreas! Keep the good work!
@AndreasSpiess 6 років тому
Thank you!
@DocMicha 6 років тому
Very nice video, with a lot of personal secrets. That encourages me to build also my new LAB!
@AndreasSpiess 6 років тому
Good idea!
@milind929 6 років тому
Andreas vielen danke für deinen video...your videos does not show your work...it shows your passion...I incidentally discover electronics now I love these things. Thanks to great channels like your. Inspiring me to discover my true potential every day. Liebe aus Indien... viele glück...
@AndreasSpiess 6 років тому
Thank you. Actually, electronics is my hobby. Maybe that is the reason for my passion ;-)
@dosgos 6 років тому
Very nice lab with lots of helpful tips!
@AndreasSpiess 6 років тому
Thank you!
@jerril42 4 роки тому
Nice lab. I didn't know there were left handed calipers, perhaps when I shop for a better set, I will investigate them. However, at this point, I've become accustomed to most right handed tools and often find it an advantage to have my dominant hand free and to practice keeping my right hand agile. Thanks for the tour.
@AndreasSpiess 4 роки тому
You are welcome. Here I also use both hands. However, I find some tools better if used with the left hand.
@AlexKite68 6 років тому
Thank you for your inspiring videos! And congratulations with 70000 subscribers!
@AndreasSpiess 6 років тому
You are welcome!
@DorsetVikings 6 років тому
Welding in a top hat - great idea to stop the burn marks on the bald bit! I found I needed a spare chair in my lab for the cat so it didn't investigate the benches, shelves, keyboard... Great video as usual.
@AndreasSpiess 6 років тому
She has her chair. But sometimes she has to inspect if everything is still how she wants...
@bobpaydar3210 3 роки тому
thanks for your all videos in youtube always help me to understanding electronics and make my ideas to come to real life and finish my project’s :)
@AndreasSpiess 3 роки тому
Glad my videos are helpful!
@abhijithkrishnan1613 3 роки тому
Nice...informative and shows how to keep lab very well. Thank you for the great ideas..
@AndreasSpiess 3 роки тому
Thanks for watching!
@a3r0naut 3 роки тому
I'm in the process of cleaning up and organizing my lab. Thanks - i got some good ideas!
@AndreasSpiess 3 роки тому
You are welcome!
@stefanmarinescu5086 6 років тому
I love "The soul of a new machine" also. Incredible story from a time (not so) long ago....
@AndreasSpiess 6 років тому
You are right!
@NunoPereira 6 років тому
Thank you Andreas for the video. Amazing always.
@AndreasSpiess 6 років тому
You are welcome!
@diggleboy 4 роки тому
Love your channel! Keep up the great work!
@AndreasSpiess 4 роки тому
Thank you! Will do!
@mramos13go 4 роки тому
Thanks from Ecuador.. love your videos
@AndreasSpiess 4 роки тому
You are welcome!
@ericdormer2196 6 років тому
I appreciated your thoughts on books that influenced you.... I recall reading 2 of them myself years ago. It prompted me to immediately obtain "Soul of a New Machine" and "Skunk Works" for my 16 year old son who seems very inclined to become an engineer. Great video by the way. oh... and you have a darling cat!
@AndreasSpiess 6 років тому
I am sure some of these books are also interesting for the next generation. Glad to read we get a new engineer. Say hello to him.
@craigs5212 6 років тому
We think alike, got all the same storage items. Do need to get the glue guns but I do have compressed air to dry off boards after cleaning, old SCUBA tank works great. Thanks for all the nice videos. Craig
@AndreasSpiess 6 років тому
You are welcome. It is a pleasure to have such subscribers...
@MaxintRD 6 років тому
Great hat! I think I need one too for my workshop... (And of course thank you for another nice video!)
@AndreasSpiess 6 років тому
Thank you for your feedback! I was not sure about the hat. My wife was strictly against it. Fortunately, my brother voted for it and, because we live in Switzerland, the majority won ;-)
@BerndFelsche 6 років тому
Thanks for the essentials workshop tour.
@AndreasSpiess 6 років тому
You are welcome!
@jorglandsiedel2968 3 роки тому
This is defititely very informative and very helpfull to improve my lab. Thank you. Looking forward to see more of your great videos (there are a aleady a lot ...)
@AndreasSpiess 3 роки тому
Thank you!. Yes, more than 300 videos. Astonishing for me, too...
@HE9JSD 6 років тому
Congratulations Andreas for your 70k+ subscribers
@AndreasSpiess 6 років тому
Thank you.
@sucka223 6 років тому
Danke vielmal für die inspirierenden Videos, Andreas! Weiter so!
@AndreasSpiess 6 років тому
Bitte, gern geschehen!
@asmolbean9300 4 роки тому
Your lab looks amazing omg
@AndreasSpiess 4 роки тому
Thank you!
@N7801Z 5 років тому
I greatly respect and enjoy your information and videos. For example, I re-viewed this one to see which soldering station you use. (Yours is a bit pricier than I want to spend today and will have to think about it.) Thank you.
@AndreasSpiess 5 років тому
I do no more use this one. I use a TS-80
@Emalo 3 роки тому
Awesome videos, keep up the good work!
@AndreasSpiess 3 роки тому
Thanks, will do!
@jacoporomei 3 роки тому
I really loved those books! They resonate a lot to me!
@AndreasSpiess 3 роки тому
I am glad to read that!
@robertcameronjones 5 років тому
What a great video! I'm inspired to remake my lab after seeing this.
@AndreasSpiess 5 років тому
Thank you. Go for it!
@riz94107 6 років тому
This was an interesting look at your lab! I love to see how others organize. I was also interested to see you worked at DEC, which I also did for a year in the 90s... Until they got bought by Compaq!
@AndreasSpiess 6 років тому
I left a little earlier towards SAP... But I cried when I heard they were bought!
@nadirsalim7419 4 роки тому
Then to hp; SAD story indeed.
@mettwoch 6 років тому
Hi Andreas, I have read the „Goal“ 30 years ago and forgot about it. When I read it a second time a few years ago, I understood how much it has influenced me subconsciously.
@AndreasSpiess 6 років тому
I think this is the strength of the format "business Novel" invented by Jeff Cox.BTW he wrote a few other books with other experts. None of them took me more than a day to read.
Телеканал ICTV
Переглядів 263 тис.
Є-Дрон
Переглядів 41 тис.
AllTimeTV
Переглядів 288 тис.
Photographer Army
Переглядів 13 млн