#402
Переглядів 75,030
День томуI will build a Mailbox Notifier using LoRaWAN and connect it to TTN V3. You will get a sketch that works with the new Version of TTN for your projects. And we will connect it to Node-Red, InfluxDB, Google Calendar, and Telegram.
I am a proud Patreon of @GreatScott!, @ElectroBOOM , @Electronoobs , @EEVblog , and others.
No Microsoft Teams, Zoom
Links:
LoRa board Pigtail (order frequency of your country): s.click.aliexpress.com/e/_Ars56y or amzn.to/3zggEA4
LoRa board SMA (order frequency of your country): s.click.aliexpress.com/e/_9J12FL or amzn.to/3Co5Vp9
Door Sensors : s.click.aliexpress.com/e/_99WrrY
github.com/SensorsIot/Mailbox...
jackgruber.github.io/2020-04-...
github.com/mcci-catena/arduin...
The links above usually are affiliate links that support the channel (no additional cost for you).
Supporting Material and Blog Page: www.sensorsiot.org
Github: www.github.com/sensorsiot
My Patreon Page: / andreasspiess
Discord: / discord
If you want to support the channel, please use the links below to start your shopping. No additional charges for you, but I get a commission of your purchases to buy new stuff for the channel
My Amazon.com shop: www.amazon.com/shop/andreassp...
For Banggood bit.ly/2jAQEf4
For AliExpress: bit.ly/2B0yTLL
For Amazon.de: amzn.to/2r0ZCYI
For Amazon UK: amzn.to/2mxBaJf
For ebay.com: ebay.to/2DuYXBp
profile.php?...
/ spiessa
www.instructables.com/member/...
Please do not try to email me. This communication channel is reserved for my primary job
As an Amazon Associate, I earn from qualifying purchases
#no#midroll#ads
@likaci 2 роки тому
Happy wife, happy life.
@AndreasSpiess 2 роки тому
True!
@felenov 2 роки тому
I really appreciate the Swiss humour and the problem solving. Good work, as usual.
@AndreasSpiess 2 роки тому
Glad you enjoyed it!
@aldonsmith3031 Рік тому
@Andreas Spiess, This is the first video of yours I have seen and I just wanted to say your troubleshooting and engineering skills are top notch!
@AndreasSpiess Рік тому
Welcome aboard the channel and thank you for your nice words!
@CTCTraining1 2 роки тому
Excellent project and well explained as usual. Very good plan to track the battery voltage especially as the temperatures start to drop.
@AndreasSpiess 2 роки тому
A few viewers are curious if it will survive winter. I will report in spring...
@dentarinc7214 7 місяців тому
I built something like this with RF24 module and small Pro-Micro Leonardo. It uses a transistor latch circuit to power it on, sends the signal to a receiver, and shuts off as soon as it gets the acknowledgment, or after so many retries. Powered by 9V battery. Has been running for 2.5 months so far.
@AndreasSpiess 7 місяців тому
Good design if you do not need the reach of LoRa.
@U8uxa8SP 2 роки тому
This looks like a valuable project, thanks for all the information, I always enjoy your videos.
@AndreasSpiess 2 роки тому
You are welcome!
@deangreenhough3479 2 роки тому
Excellent work Andreas 🏴😁👍
@AndreasSpiess 2 роки тому
Glad you enjoyed it! Have a nice Sunday.
@reidlanham2011 2 роки тому
Very good to see the video of this project after you talked about it on the Ham Radio Workbench podcast which I really enjoyed!
@AndreasSpiess 2 роки тому
They asked me "what is on your workbench" ;-)
@wolfgangschulter4940 2 роки тому
Great work, Andreas! For my solar-powered sensor project I chose the Arduino Pro Mini as main controller with AT328P running at 3.3 V. Deep sleep with RAM retention is done by sleep_mode(), during sleep its consumption is below 0.1 mA.
@AndreasSpiess 2 роки тому
The AT328P is probably the better solution for a LoRa node. The only problem is the memory space for the new library...
@MrBobman49 2 роки тому
The ESP32 in "deep sleep" consumes 1/10th of that, 10uA. 8-bit processors are annoying because you are always wondering if you will hit the memory ceiling.
@paulg3111 2 роки тому
Great idea using Lora. My mailbox is over 60 meters from my router but luckily a neighbour in our Siedlung close to the mailbox uses upc as well. So I connect via UPCfree Hotspot with esp32cam on latch triggered by vibration sensor. Take a photo of the mail as well and send via email. Always run to the mailbox when photo of yellow envelope.:)
@AndreasSpiess 2 роки тому
Excellent idea to use UPCfree. I never thought about that!
@thedarkglovemusic 2 роки тому
I have been working on one of these on and off for the past year but using Xbee. I managed to get quite a lot of battery life out of deep sleep but I didn't even think about actually triggering power instead of waking it up! Also I'm really pushing the limit of the Xbee range so definitely need to get on board with LoRa. Thanks again for your work and videos.
@AndreasSpiess 2 роки тому
XBee has much less "punch" but much more bandwidth. If it works, it is a good solution. But in my case it probably would stay inside the box...
@thedarkglovemusic 2 роки тому
@@AndreasSpiess I also needed to put the antenna on the outside which wasn't ideal.
@EsotericArctos 2 роки тому
My mailbox is a fair distance from my HA hub. I'd tried RF and it wasn't quite good enough. I had not thought of using LoRa. Thank you for the great ideas.
@AndreasSpiess 2 роки тому
As mentioned, I once tried 433MHz and it also did not work. So you have one more chance...
@soulrobotics 2 роки тому
I was thinking about this for an year and i was too lazy to develope it! This is a great gear,! Andreas!!! GOOD JOB SECOND TO NONE,!
@AndreasSpiess 2 роки тому
After all my setbacks I can tell you that you saved quite some time ;-)
@PhG1961 2 роки тому
Excellent project which can be adapted for many other notifying situations. Sunday morning entertainment with a few one liners of Swiss humor...
@AndreasSpiess 2 роки тому
I also think it could be adapted to other situations. This is why I thought it is a good use case for a node for the new TTN network.
@dmytr01 2 роки тому
I love your projects!) I like the way you explain all the things. I learn English by your lessons!)
@AndreasSpiess 2 роки тому
That's great! Thank you.
@Brandon_SoMD 2 роки тому
I may use this to get me started on building a "notify me when my dryer finishes so the clothes will not wrinkle" alarm system that I keep meaning to build. Thanks for the inspiration!
@AndreasSpiess 2 роки тому
If the dryer is in the reach of WLAN you probably can use this technology...
@axelhertwig8258 2 роки тому
Cool! If the battery is directly connected to VDD you can also use 'extern "C" int rom_phy_get_vdd33()' and save the voltage divider (and current). I usually calibrate this at 3.3V and it works ok-ish.
@AndreasSpiess 2 роки тому
Did you try it? I found posts complaining it is not reliable.
@axelhertwig8258 2 роки тому
@@AndreasSpiess Yes, I use it after Wifi is connected. In very few cases I get the impression that it is 0.1V off. For real decision making, e.g. power down at low battery voltage I use an recursive filter to make it more reliable. If you don't trust it, you can still move your voltage divider behind the power switch to save current and for the case the newspaper is stuck for a long time you can connect the low end to a GPIO: low for dividing, tristate for off (the ADC GPIO will be maximum at VDD in this case which should be ok).
@MrBobman49 2 роки тому
How can you connect the battery directly to VDD when the ESP32 has a VDDmax of 3.6V?
@axelhertwig8258 2 роки тому
@@MrBobman49 I was refering to the setup with a LiFePo4 battery. It has a maximal voltage of 3.6V, nominal 3.2V.
@Moonlight0551 2 роки тому
Well done, as usual you have researched this very well and marital harmony is very difficult to attain. It would not work in Australia where the newspaper delivery guy(person) drives down the middle of the street and flings the paper from side to side. It might end up on the road, caught up in a tree or on the roof and block your guttering if really unlucky. But, it would work for letters in the mailbox(apart from the junk mail) as we have mostly trained our posties to put the mail in the letter box.
@AndreasSpiess 2 роки тому
The price for a newspaper is very high here (500$/year). So we probably would not accept this "treatment" ;-)
@NETBotic 2 роки тому
I've had a lot of fun with LoRa on short range links inhibited by structures, like this.
@JC.72 2 роки тому
i am surprised that lora can go thru metal like enclosures like this mailbox.
@AndreasSpiess 2 роки тому
Thank you for confirming my observations!
@henningklages861 4 місяці тому
Very good idea. Thanks for the video. I use the Browan motion sensor. It works dine so far.
@AndreasSpiess 3 місяці тому
Cool!
@electronic7979 2 роки тому
Excellent project 👍
@AndreasSpiess 2 роки тому
Glad you like it!
@maufctube 2 роки тому
Hi. Thanks for another great video. You should add an alarm on the exception that the postman leave the door opened. It could be an additional function, just to evaluate the postman work or how many shipments doesn't fix in your postbox. Greetings from Peru!
@AndreasSpiess 2 роки тому
It would be easy to send another message because the ESP32 stays on if the lid is open. I could send it before it goes to deepsleep.
@maufctube 2 роки тому
@Andreas Spiess Thanks!
@permissionBRICK 2 роки тому
I built the same thing using a Heltec CubeCell (for super small deep sleep power draw) in my appartment, and I also added a small button inside the mailbox which sends a packet that unlocks the entrance gate through the intercom, to have a fast and easy way to unlock the entrance door when I am coming home with groceries etc. just by reaching in the mailbox quickly (since the mailbox is right next to the door). I also did it without lorawan, instead I used plain LoRa.
@AndreasSpiess 2 роки тому
These Cubecells are very good for such applications. And you are right, no TTN needed. But I anyway have a gateway on the roof ;-)
@davidstonier-gibson5852 2 роки тому
Nice solution! I keep pondering a letterbox notifier, though my circumstances are quite different (private property but no flap i.e. mechanical movement).
@AndreasSpiess 2 роки тому
Other viewers use a load cell on the floor of the box to measure the weight.
@davidstonier-gibson5852 2 роки тому
@@AndreasSpiess I wondered about some form of weight sensing, a microswitch and lever maybe. It would have to very sensitive but also quite robust. What's neat about your solution is the momentary ON operation, allowing zero standby power.
@AndreasSpiess 2 роки тому
You could only measure weight once ever half hour or so to save energy, I think.
@TheRainHarvester 2 роки тому
@@davidstonier-gibson5852 They sell flexible strain sensors that are 5" long.
@Medievalguy88 2 роки тому
I will be curious how this will perform in the winter. Do you imagine the battery or switch will be affected much by the cold? Great project and video as always!
@Ox4C4A 2 роки тому
Charging a lithium cell in the cold is a big no-no, but usually low current discharge is fine.
@AndreasSpiess 2 роки тому
I had a few Li-Ion batteries on the roof during last winter and I even charged them with solar. They survived, but one died during summer. So I do not know if it was the cold or the heat.
@jmr 2 роки тому
All my outside sensors are currently powered by disposable cells so I have no personal experience. I know of several projects by other people however that perform well in cold with Li-ion cells and no heaters. The primary places I know where heaters are required are in high altitude balloons (edge of space) and off grid battery systems(high charge/discharge).
@EmilyLoebl 2 роки тому
I've had a similar project on my desk for months. Using one of the Cubecell boards that has a tilt switch connected, to send a state change, transmits thru TTN, then goes back to sleep. Right now been sitting on my desk that beacons once a day for battery levels. Going on months now and battery level has been amazing. This may inspire me to finally just get this project done as the previous mailbox motion sensor was recently destroyed by ants.
@AndreasSpiess 2 роки тому
Other viewers also used a Cube cell. This seems to be a very good solution for such a sensor.
@GillesBruno38 2 роки тому
Toujours aussi instructif : merci !
@AndreasSpiess 2 роки тому
De rien!
@salehsalehi8433 2 роки тому
Nice chain of thoughts:" Not wanting to check the mail box several times in a day...". I would have suggested checking the mail box once at the latest possible delivery time, say 5:00 PM. Simple solutions are most elegant....
@AndreasSpiess 2 роки тому
Unless somebody else "checks it first and removes your Chinese Packages ;-)
@rauldiosdado2972 2 роки тому
This video was like sitting next to you going through the same problems when developing IoT projects with LoRaWAN. Same problems and very similar solutions, in my case the biggest differences have been to change from TTN to ChirpStack... This simplifies things a lot, TTN V3 does not work 100% well, the ABP mode has become useless with the new changes and the OTAA mode is not well tuned yet (to do things a little out of the ordinary). Thank you very much for your videos, they always have been very useful and even interesting. Byeee
@AndreasSpiess 2 роки тому
So far I never used Chirpstack. But I made some tests with a Helium light gateway. This could be interesting for our US colleagues.
@dreamcat4 2 роки тому
very good! that was a very enjoyable video. and very useful too, because what other solution can do thisata low power, except for lora? and a great execution of this excellent example. one of my favorite recent videos here. many thanks
@AndreasSpiess 2 роки тому
You are welcome!
@simoncollins6650 2 роки тому
Hi Andreas Another great video , shame I don’t have a post box my mail though the front door. 😁 I would just comment that the Heltec cubecell board AB02 and other cubecell products can use deep sleep and gpio as wake input with very low current.They can also be set in the board config menu to store network credentials so no rejoin or loss or counter values. I now use these a lot. Not Esp32 but use combined an MCU/SX126x chip set (ASR 6501/2) new products look to use (ASR 6601). Also my comment on TTN V3 over last 3 month it is stable has been very good. Simon
@AndreasSpiess 2 роки тому
How do you program these boards (which IDE, libraries)?
@simoncollins6650 2 роки тому
@@AndreasSpiess what is your preferred email address to contact you on . Quick summary Ardunio IDE could use others, libraries are supplied on Heltec site/ GitHub based on Semtex / stackforce standard node libraries . I can give more info and comments by email too long for here . Simon
@AndreasSpiess 2 роки тому
You find links in the description on how to contact me.
@klif_n 2 роки тому
This is a great video! I built something similar using an RFM95 module and an ESP32 in the base unit to send text messages to my phone. It really is remarkable how far the modules can transmit. One reaches over 1000' for my brothers driveway and another about 400' thru woods and a low hill at our tree farm. As usual I have learned a few new things by watching your video. Thx
@AndreasSpiess 2 роки тому
Indeed these LoRa modules work very well. I also was astonished when my gateway got signals.
@ulwur 2 роки тому
@@AndreasSpiess does the transmission go through before the flap does down, or goes the panel gaps* allow the radio signal to pass through? (* I'we been watching too much Munroe...)
@AndreasSpiess 2 роки тому
I do not know its pass. The flap could be one possibility
@wayne6220 2 роки тому
Very good video, thank you.
@AndreasSpiess 2 роки тому
You are welcome!
@michaegi4717 2 роки тому
As allways this is a genious project. There are libs available to store in eeprom/flash at rotating positions. They also use the latest valid value, so if you have problems with flash you will get information from saving before. Warning: most Flash-Memory fails writing at low temperatures.
@AndreasSpiess 2 роки тому
I was not aware of those libraries. And also not about the problem of low temperatures. Good to know. You will see in the next video that I had to take an entirely different route ;-)
@michaegi4717 2 роки тому
@@AndreasSpiess This flash issue was a problem at my work for quite some time. Now I'm suprized that I found several ESP32 data sheets with operation temperatures down to -40°C. Now I really wonder if this works. I'll put one of my ESP8266 to the freezer to check if they really can handle negative temperature.
@michaegi4717 2 роки тому
@@AndreasSpiess A first test in the freezer looks good. It seems that the values are normaly written to FLASH.
@flokibyarian6832 2 роки тому
Ich werde sofort das gleiche machen! Danke😁
@AndreasSpiess 2 роки тому
Wart noch das nächste Video ab ;-)
@vinny142 2 роки тому
So, why not use one of those self-poweroff circuits? Opening the mailbox pushes a button that latches the power "on" and when the messages have been sent the ESP turns itself off. That would have no standby current at all.
@AndreasSpiess 2 роки тому
I thought I used exactly what you described in this video. So I am not a very good teacher :-(
@MrTohnitan 2 роки тому
@@AndreasSpiess indeed. Do you also have a design for an RTC triggered circuit? You can get away with the built in RTC with a pro mini, but once you have a circuit with an esp and multiple sensors you want to turn everything off between intervals
@originalmianos 2 роки тому
For audio notification I have an esp32 with an I2S decoder and class D amplifier module, speaker and a miniature 240 to 3.3V switched mode PSU in a little case. I wrote a little app that plays a specified mp3 from an internal web site based on an mqtt command from node red. This way I can ring the door bell from an RF bridge, play an hourly ding like a clock and or any other sound. With an enclosure designed with audio in mind and reflex ports and a reasonable little speaker, a normal person could not hear the difference between mechanical bell and my box. People actually comment on the old style mechanical two tone bell.
@AndreasSpiess 2 роки тому
Cool project! I once did a similar thing but with an MP3 player module instead of a I2S interface. My viewers were enabled to trigger a messages back then...
@davidurdahl6656 2 роки тому
Fun video. Definitely couldn't do this here in the southwest US where it gets up to 118 degrees for 4 months.
@AndreasSpiess 2 роки тому
Well possible. And inside the box it probably would even heat up more.
@davidurdahl6656 2 роки тому
@@AndreasSpiess exactly. And it looks you have a have an admirer.. lol I'm guessing the last two comments are not from you?
@AndreasSpiess 2 роки тому
You are right. A troll uses my name and picture
@davidurdahl6656 2 роки тому
@@AndreasSpiess people suck...
@dengyun846 2 роки тому
@@davidurdahl6656 It's funny because I just found a bag of haribo left in my mailbox from a friend the other day (same Swiss standard-issue box as Andreas has) and it was actually quite warm, nearly melting, and it was only 20ºC (=~70F) out. @Andreas btw, since you're careful about your location, the map screenshot at 1:00 is unambiguous, fyi
@ol-np8sy 2 роки тому
Salutations de Fribourg....great work
@AndreasSpiess 2 роки тому
Thank you! Passed Fribourg last week on my trip to Nice ;-)
@allcrafter3747 2 роки тому
I modified a Doorbell and now it works perfectly with an ESP that sende ne an E-Mail
@AndreasSpiess 2 роки тому
Good idea and very simple! If the doorbell signal is strong enough.
@Sylvan_dB 2 роки тому
I suggest one more component in the transmitted message: a sequence number. That allows the receiver to detect a missed message. More thoughts: A periodic message might also be good to confirm operation, but then you either need to send a reason or deduce based on time (every morning at 05:00 is unlikely to be the mail carrier) that it is the automatic message. Finally, sending battery level in each message could be convenient.
@AndreasSpiess 2 роки тому
The battery level is transmitted in the message. I agree, a periodic message would be a good thing, but would need a very different setup because here, the ESP32 is completely switched off. You could use deep sleep to achieve that. TTN transmits a sequence number and I could check it. For this use case I anyway would go and check the box if no alarm came till the evening. So I discover the "missed" message (if I find mail and did not get a message)
@soumitradey8208 2 роки тому
Excellent Sir
@AndreasSpiess 2 роки тому
Thank you!
@MyGregon 2 роки тому
very nice video!! May I ask why you don't took a weight sensor into consideration, to detect if something is in the mailbox?
@AndreasSpiess 2 роки тому
Also a possibility. But it would take a lot of space (our box is not very high) and also need much more energy because you have to check the weight regularly.
@tim-wise 2 роки тому
Thanks for all you do on your channel. I've learned a lot over the past year in following you. A question about your latch circuit at 6:06- if you wire a momentary reed switch from 5v to the load in order to wake the MCU up, wouldn't that put 5v onto pin 2 of the NDP6020P in your diagram? Is that ok? I can see how it might be "equivalent" to the gate energized and current flowing.
@AndreasSpiess 2 роки тому
The gate anyway is pulled to 5v by the 10k resistor. It needs to be pulled low to make the FET conduct.
@tim-wise 2 роки тому
@@AndreasSpiess Yes it is. I'm sitting here staring at that and it never registered. Thanks!
@martinp8889 2 роки тому
Good work.
@AndreasSpiess 2 роки тому
Thank you!
@gregorymccoy6797 2 роки тому
"Happy Wife" -- the most important design goal. Some things are universal 😀. It always amazes me that even relatively simple projects are full of tough problems to solve. Thanks for sharing with us viewers.
@AndreasSpiess 2 роки тому
You are welcome! I learned something during my career: The detail is always complex, even it it looks simple from the distance...
@bluefishactcl1464 2 роки тому
Nice. I think is time for me to add Lora to projects
@AndreasSpiess 2 роки тому
Definitively a valuable technology for certain applications
@LinuxGalore 2 роки тому
Had similar issues myself, ended up using a solar powered WiFi security camera with built in human detection. Total cost was about USD$50. The software allows me to setup a virtual security fence and when a human enters the area around my mail box it triggers the camera to send a picture to my phone. I ended up writing a security program and using one of my running Raspberry Pi servers as I was a bit wary of using an app that has servers in China hooked up to a security camera.
@AndreasSpiess 2 роки тому
Lucky you! Since I life in a very crowded area Security cams have a hard time to only detect meaningful signals. I have one on the front door, but it still creates false alarms. Even with the electronic fence :-(
@Thamli 2 роки тому
The external temperature will affect the battery life the most. Specially in Switzerland. Great video though. I've smartified my letterbox with a height sensor an esp8266 with esphome and home assistant to deliver the messages on my phone/smartwatch, but the battery doesn't last a week. Is worked so fast that the postman was at the neighbors when I went outside for the mail. As I don't receive many packages anymore, I'm not using it for now.
@AndreasSpiess 2 роки тому
I will see if the battery survives or if I will switch to primary AA batteries. Getting a long battery life was important for me, but measuring the height is also an interesting possibility.
@Bianchi77 2 роки тому
Nice video, thanks :)
@AndreasSpiess 2 роки тому
You are welcome!
@wjn777 2 роки тому
Welcome back from the summer break Andreas - very nice video and thank you for sharing. The IRF7317 combines a P and N channel MOSFET in one small surface mount package, I used one of those generic breakout boards to make it a little easier to work with. This is nice if you want to save some space in your enclosure. Thanks to your previous video, I used this concept as well to make an ESP8266 run in a doorbell without deepsleep. Interesting using LoRaWAN - but considering all the effort, is it not easier to do a point to point connection from the mailbox notifier to another ESP32 that converts the incoming LoRa message into something like MQTT? I did that for a ESP32 weather station, and it is working very well, through many walls at approx. 30 meters
@AndreasSpiess 2 роки тому
Thanks for the tip about the IRF7317. It seems to be a good solution. Concerning LoRa /LoRaWAN: I prefer LoRaWAN because I already have a gateway (and I wanted to have a show case). If you have no gateway, your solution is better.
@remifr4sw322 2 роки тому
@@AndreasSpiess Just a Question about LoraWan Gateway : I've made a mistake with Dragino LG02 (no more compatible with TTN v3 and LoraWan) what do you advice me as gateway (also for students so it can be an all in one a a Raspberry Hat), no Helium/crypto need but your advice, thank you in advance - Remi
@AndreasSpiess 2 роки тому
@@remifr4sw322 Any gateway is good. You have to decide if it has to be indoors or outside. Mikrotik has probably the cheapest Outdoor gateway. Just check the frequency before you order.
@jmr 2 роки тому
I took the easy route and used a wireless window sensor. I have a plastic mailbox with line of sight though.
@AndreasSpiess 2 роки тому
Then it is much easier. A window sensor is a good decision in this case.
@fortheregm1249 2 роки тому
wife send you to get the paper ? now i see why you were motivated to make this :D one thing i like about Esp8266 vs esp32 is that it can just read input voltage and there is no need for using a GPIO or voltage divider. I've ran bare esp8266 with direct lipo charged to 4.1v, if anything it runs better and gives stronger wifi signal. not tried that with ESp32 as i like them too much to chance it. when battery life and size is critical i use an optoisolator connected to a GPIO in between the voltage divider (just to make myself feel better). great video as always, VERY clever decision to use the reed switch, the choice didn't even accrue to me, I thought a radar module would have been the best choice.
@AndreasSpiess 2 роки тому
Good point about the ESP8266. I do not know if the ESP32 has a similar functionality. But the voltage divider was not a big thing.
@fortheregm1249 2 роки тому
@@AndreasSpiess I've wasted a lot of time looking for an equivalent command to ADC_MODE(ADC_VCC) for esp32, but from my understanding its not supported not due to lack of code/library but hardware design. pity because its such a nice feature that lets you add battery monitoring to all your project for free.
@jerryrobinson7856 3 місяці тому
‼️You have the answer to the postal delivery issue many share. I was a bit shocked that the “tempest” allowed a signal to get out. If I had signal problems, I probably would have drilled a tiny hole in the back of the mailbox and 3d print a tiny similar aluminum color substrate to encase the antenna wire in that just looked like a flattened out small straw like bump up and down bump and peel and stick it on the back of the mailbox where no one would be looking anyway. I did a lot of secret surveillance work in my days. People would be shocked at how many hiding places there are to hide cameras and pin hole cameras. It’s a belly laugh when occasionally people find them often long after they were installed. We had an electrical pencil sharpener with a pin hole camera in the sharpening hole. Some guy in the next couple of cubes over came in to sharpen his pencil and was shocked he could not insert it. The look on his face looking right at the glass was priceless. Oh well, the good old days… Granted, all that work was for a client’s.
@AndreasSpiess 3 місяці тому
You had an exciting life! I only had to spy on foreign radio signals during my army time. Not very exciting :-(
@jerryrobinson7856 3 місяці тому
@@AndreasSpiess Hi There Andres. So have you had any times on this mailbox the signal did not get through or is it the flap opening was an immediate transmission so it works flawlessly? Any problems with battery life, perhaps trying many times? I also have some clever (all the way to sneaky) ideas from your posting this. Occasionally I still am called on to something exciting. LoRa solves many distance issues. I saw another user use a yaggi antenna. I wonder if at the top of a hill, you create a bunch of these antennas a certain amount of degrees apart, each tied to its own LoRa, if that would create a ultra distance cellular footprint?
@AndreasSpiess 3 місяці тому
@@jerryrobinson7856 1. No, the signal level is quite high 2. I monitor battery voltage over the air and change batteries if it becomes too low. This is necessary once or twice a year and is done in 5 minutes.
@jean-claudechevalley5663 2 роки тому
I enjoy to see how use my Dragino+Uno on TTN v3
@AndreasSpiess 2 роки тому
:-)
@cedricpod 2 роки тому
you are one of the best
@AndreasSpiess 2 роки тому
:-)
@iggman18 2 роки тому
Could you add a telegram notification when the wife alarm is cleared, so you know if the mail was picked up while you were out? What about a clear button in the mailbox itself? You wouldn't want to have two people checking the mail if they arrive at different times.
@AndreasSpiess 2 роки тому
The design of the "Happy Wife" box in the kitchen has no reverse channel. So in my case it is not possible without changing the logic of the kitchen box. But the ESP has all info and I could send an MQTT message to node-red to "clear" the telegram alarm. Maybe I will do it once.
@JoergGebhard 2 роки тому
Love the idea, wanted to do this since a while. Luckily an can get away with WIFI
@JoergGebhard 2 роки тому
@Andreas Spiess i am confused is this some type of spy secret code ?
@AndreasSpiess 2 роки тому
This was not me. Somebody used my name and picture and left a lot of comments… It is easier if WiFi works. But maybe the reward is also smaller because the walk distance is also shorter ;-)
@JoergGebhard 2 роки тому
@@AndreasSpiess true. but since it mine i could even weigh the box to see if its worth going now :)
@aymanjundi7540 2 роки тому
As always...very useful, start building right now :), I wanted to propose a video idea, alot of us "followers" are making their own projects, when it's done and tested, we would like to produce them without using boards and modules, and make the PCB with only necessary parts...... would you be interested in making a video about ESP32 chip or even better.... SX1276...maybe with differernt building options and configurations....thanks and keep up the great work.
@AndreasSpiess 2 роки тому
Unfortunately, I am not skilled in PCB design. So this is not my topic :-( But I am sure you will find videos with this topic.
@embededfabrication4482 2 роки тому
we have those too, except there is a generator for a capacitor that works on the door opening and closing, no battery required
@AndreasSpiess 2 роки тому
Like the Enocean switches. I am not sure how hard my flap would open to generate enough energy. The door opening seems to be better to generate enough energy.
@damedaE90 2 роки тому
Nice project :) I do the same but with Wifi and modem sleep to measure the time the lid was opened..So i can guess if it is chinamail or just bills ... Also i measure, if my mail was taken out of the mailbox xD Saves time :) Greetings to Switzerland
@AndreasSpiess 2 роки тому
Cool! Because you can distinguish the bills you can start to work on how to avoid them ;-)
@arva1kes 2 роки тому
i would add additional switch for mailbox - if whole door is opened it will reset alarms for "new mail" automatically ;)
@AndreasSpiess 2 роки тому
Already done (see next LoRa video) ;-)
@dmrbdlln Рік тому
Why? Because I can!😀 I love this channel!😍
@AndreasSpiess Рік тому
Thank you!
@AndreaIannucci 2 роки тому
I think that you theoretically also be able to turn off the LED if you put another reed switch on the door you open to collect the mail, if that open (and/or close) you turn of the led and you can then consider the mailbox as empty :)
@rishabhgusai96 2 роки тому
That newspaper case will be an exception.
@AndreasSpiess 2 роки тому
You are right. Maybe I will add this switch in the future
@AndreaIannucci 2 роки тому
@@rishabhgusai96 Absolutely true, but maybe since you're getting the newspaper, you would also check if you got more mail :)
@Palominostudio 2 роки тому
Ah, greetings Andreas. The Sunday morning tech news from Switzerland. This has turned out very well, I like it a lot. It is also highly customizable and what you have done is an excellent departure point to get started with. Thanks for the video, have an awesome week. Kind regards, South Africa
@AndreasSpiess 2 роки тому
Thank you! Indeed this project was intended to be used as a basic node for the new V3 network. Have a nice week, too.
@TOMTOM-nh3nl 2 роки тому
Thank You
@AndreasSpiess 2 роки тому
You are welcome!
@Bandedegarantie 2 роки тому
That's creepy I was talking about this with a friend a couple of days ago, using LoraWAN
@AndreasSpiess 2 роки тому
You you have a blueprint ;-)
@jstro-hobbytech 2 роки тому
What an awesome idea Andreas. Unfortunately the small communities in Canada do not have post(people), we have a small manned(personned?) building up the road. Our slots are so small that there isn't room for a sensor. I guarantee if there was room they'd let me do it as I'm the only one who receives packages with Chinese text on it haha I'm also friends with the postmaster. This would be a perfect use case for the unused flag pole and Lora module I have. We have the same weather as you and I've been planning to use it as a central point for esp based communication on my property and it's line of sight to the small post building haha. You're as funny as you are smart Andreas. Great video.
@AndreasSpiess 2 роки тому
Thank you! You could offer the postman a small box with the same content and a button on top. Maybe he would do you the offer to press it when mail arrived for you ;-) I never was in Novia Scotia. The only place I was in Canada was Toronto.
@jstro-hobbytech 2 роки тому
@@AndreasSpiess I lived in Toronto in grade 2. The cape breton highlands are amazing. Well you live in Switzerland so it's probably the same views. Off topic but I'm a bit of a history buff. Armies crossing the alps on foot in the winter has always bewildered me. I cannot wait to see your awg voltage boost project. I got excited when you mentioned it in your vacation parcel arrivals video. I've been waiting to buy a new awg because of it. The ability to output an adjustable ac sine wave for psu experiments has been a (nerd) dream for me since learning dc basics. I want to study different rectification circuits and filters and create power delivery circuits that are all at different voltages and such. An adjustable ac bench supply costs more than all my lab equipment and on hand ics, components and my thousands of leds combined. Plus my 3d printers. Not my guitars though lol, I was never happy with the guitars I had until I started this hobby. So to say I'm excited for that video is an understatement.
@jstro-hobbytech 2 роки тому
@Andreas Spiess pardon my friend?
@AndreasSpiess 2 роки тому
A spammer uses my name and picture. Sorry for that.
@AndreasSpiess 2 роки тому
For the moment I do not know when the amplifier video will air. I have to search for a good use case…
@Bookohms 2 місяці тому
Wondering... After these 2 years how is the battery working? Updates? Great engineering skills!
@AndreasSpiess 2 місяці тому
I have no statistics. But I had to replace the batteries once since it is running.
@mariogudelj5815 2 роки тому
Hi Andreas, great video as always. I’d love to install one in my building. I wonder if the signal could travel through 3 concrete slabs to a 4th floor. The distance is about 20 meters but vertical through concrete. It’s a 915Mhz frequency I’d need to use. Have you done any tests through walls and concrete? I’d love to know before I start buying all the hardware. Cheers! Keep up the good work. I can’t stop binging your content which I’ve discovered only recently. By the way, the little hand you use to point things out keeps cracking me up like I’m special. :)
@Tom-ku8bu 2 роки тому
I think it could work or else you install a big antenna and if it still not works install the gateway more near by like the basement if you can get internet there. Or add an other lora outside the box which relays the signal to your gateway. just try it out befor you invest a lot of time into it. You also could buy just two relativ cheap lora boards to test first the lora to lora conection.
@AndreasSpiess 2 роки тому
RF choses the easiest way. My LoRa sensors work fine from the basement to the roof (3 floors). But I assume not through the concrete... But who cares if it works? Summary: You have to try to know.
@veronicathecow 2 роки тому
Great project. Suggestion. Micro switch, limiting resistor, large capacitor, flap opens, charges cap, transmitter comes on, receiver notes attempted connection and registers it as flap opened (mac address, no need to send data), notes time, does rest of stuff
@veronicathecow 2 роки тому
Hi Andreas something strange showing up on comments. Maybe different character set. Thanks again video. I have a well 250 away that I need to monitor.
@AndreasSpiess 2 роки тому
A troll uses my name and picture and leaves a ton of comments. I understand your concept. However I prefer to let the micro switch power off when finished. It is more precise, I think. You are right. I only could send one character (LoRaWAN needs at least one character). But I like to know the voltage.
@veronicathecow 2 роки тому
@@AndreasSpiess sorry to hear that. My email was used to spam people. Very annoying. Keep up the great work.
@mmoci81 Рік тому
Hi Andreas, one of 2 best channels for starting with LoRa I manage to find for now. Regarding problem with Joins and deep sleep... would it work with ArduinoProMini in V3 setup you show here?
@AndreasSpiess Рік тому
It uses the same processor as the Arduino Uno. So it is the same problem with memory.
@miked3655 2 роки тому
Hi Andreas, love/hate your channel. So much great content and ideas that my wallet is complaining!! I do have a question about this sketch. I have run into this issue in the past where the example sketch, yours included, is written for the EU868 band. I have to use the US915 band and from everything I have noticed they are very different in how and what you need to code. I am still learning this but it appears that there is much more control over the EU868 band over the US915. For instance you cannot specify what SF you want to transmit on, at least I have not found anything that will work. And in your sketch the "EU Like Bands" portion fails when I try to compile it for the US915 frequency, " 'MAX_BANDS' was not declared in this scope" is the error I get. I assume it is because that function is not allowed or required when using the US915 band. I have not tried commenting it out and trying it as I do not know what it is trying to do. I have not seen anyone using this option of the LoRa library. Is this section important?
@AndreasSpiess 2 роки тому
Yesterday I learned that this sketch only works for the European TTN. I was not aware of that. I have no solution for the US, unfortunately.
@miked3655 2 роки тому
@@AndreasSpiess Thanks for your response and this is my biggest frustration with LoRa, trying to convert a very customized EU868 sketch to a US915. I think LoRa is used much more in Europe and hence so much more project available examples to go by. If I figure something out I will let you know!
@Dennis-hb8tw 2 роки тому
Great! I tried to look up Video #388 (At 6:00) for the power switching prototype board but found only your video about the summer break. Did I missed it?
@philpearce3248 2 роки тому
You will find the Mosfet switch on video #389 at 11:55
@AndreasSpiess 2 роки тому
I did not mention the right video. Sorry for that. And thank you, Phil.
@Dennis-hb8tw 2 роки тому
@@AndreasSpiess Hey Andreas! Never mind. Is it possible that the Andreas below is a bot/fake?
@AndreasSpiess 2 роки тому
Yes, it is. I reported it.
@binthem7997 2 роки тому
Man I love your videos. Wish I had this channel available during university studies. It's teaching me new stuff and solidifying theory I've read. Keep it up! Greetings from your sibling country Sweden!
@AndreasSpiess 2 роки тому
Thank you for your nice words! Indeed, some viewers think that I am Swedish...
@binthem7997 2 роки тому
@@AndreasSpiess Yea I know the feeling :-D Happened several times that people believe I'm from Switzerland. I can't blame them because of the many similarities.
@lint2023 2 роки тому
I don't think video 388 was the one with the two FETs for power on and off. Do you know which video it was. Thank you. I now see #389 mentioned in comments. Thanks.
@hoctrimededebutry8655 Рік тому
Hello from france !! excellent video as usual 😀 I'm looking for a mailbox notifier and your solution is nice !! unfortunately, the LorA's cards are no more available (Amazon and AliExpress stores)... Do you have any other references ? Thanks a lot one more time for the quality of your job !!
@AndreasSpiess Рік тому
Maybe you use a Heltec Cubecell. They are also quite power efficient.
@dynamicdevices-iottraining7801 2 роки тому
Interesting to hear your thoughts on the TTGO/Heltec power consumption. I spoke to Aaron @ Heltec about this a couple of years ago and he sent me their Wirestick Lite which he told me was much better. Seems to be the case. They also have some CubeCell boards now which seem very good. Have you tried these?
@AndreasSpiess 2 роки тому
I made a video about one of their boards. It is very good for low power applications.
@mfx1 2 роки тому
Add a second switch that sends a "collected" message to reset the light when the door has been opened then you don't have to remember to clear it manually.
@AndreasSpiess 2 роки тому
Good idea!
@AndreasLink 2 роки тому
Absolutely awesome and a great start into LoRa V3 projects. I can really feel and follow your challenges to get this finally successfully done. I still love your Killswitch, to turn power off, when job is done; this is really smart. And I'm waiting the whole year for your LoRa gateway v3-stack migration video 😉. You are doing excellent work, thank you very much!
@AndreasSpiess 2 роки тому
The migration video is in the making. It will be much easier than you think ;-)
@AndreasLink 2 роки тому
@@AndreasSpiess that makes me even more curious then 😉!
@id513128 2 роки тому
Is it possible to use a light interrupter with a coded pulse? I'd love to apply this with a mailbox in my condominium since there's no mailbox flap to trigger the tilt switch and an ultrasonic sensor might not work with a thin letter too.
@AndreasSpiess 2 роки тому
The problem of all "active" sensors is the power consumption. If you can power from mains your solution should work.
@docarmodeiras 2 роки тому
Just mount a litle Door ínside the gole.
@id513128 2 роки тому
@@AndreasSpiess Thanks for your reply. I might only run once an hour from sunrise till sunset. And maybe use some kind of replaceable battery like 18650 or 14500.
@id513128 2 роки тому
@@docarmodeiras The problem was, just like Andreas, I don't own the mailbox but the HOA does. And the box is actually just a drawer stack with each other. I don't think installing a flap will work though.
@Tom-ku8bu 2 роки тому
@@id513128 How about something like a scale or just an button that is beneath a second bottom? or an Solar panel with an controll light sensor that turns on when the pannel is covered and the controll light sensor has light? Maybe an transistor logic could trigger the lora board on.
@lexandro 2 роки тому
I'm curious how the swiss winter affects the battery.
@AndreasSpiess 2 роки тому
Me too ;-)
@zyghom 2 роки тому
OK, superb as usual Proposal for improvement: distinguish if the mail is the newspaper or box from China - "because on this channel we always want more!" and btw: when will Andreas start using (and sharing) Home Assistant? ;-)
@AndreasSpiess 2 роки тому
So far I did not use Home Assistant. I use Node-red because I think I get more control. But you never know ;-)
@zyghom 2 роки тому
@@AndreasSpiess that is very mature answer Andreas ;-)
@brianballard905 2 роки тому
With all the issues of joining the network and given the distance is very short, would it not be easier to simply go "peer to peer"? The mailbox powers up and transmits it's simple message. In your house a Lora board attached to a Pi listens for a message then does it's thing. No need to use the TTN etc. I use this system for monitoring a treatment plant for my water supply about 1km away. Just a 5byte "chirp" every 10 minutes or so.
@AndreasSpiess 2 роки тому
You are right, it would have been easier. But I needed a motivation to migrate to TTN V3. And this one was a perfect fit if I see how many problems I had to solve...
@nikolausluhrs 2 роки тому
I wanted to do a similar project but the issue was that the mailbox for my neighbors shares the same master door, where as we each have small doors to access our own mailboxes. So i would need a sensor to detect the actual mail and not just the door. Any ideas for something that could detect mail?
@leen.3785 2 роки тому
a plate on the bottom and a carbon flexible brush that contacts the lower plate.. when mail is present the connection will push thin brush out of way and keep connection broken
@AndreasSpiess 2 роки тому
Other viewers also used a load cell at the bottom of the box to measure the weight.
@NavySeal2k 2 роки тому
A second reed switch on the door could reset the happy wife LED automatically. Just saying if you want a new toy soon? ;)
@AndreasSpiess 2 роки тому
Good idea!
@jstro-hobbytech 2 роки тому
Second post, I apologize. The happy wife concept has does wonders for my hobby. Probably one of the most important life hacks (or marital happiness lessons) I've ever learned. Especially since I'm medically retired and she has a promotion which requires a home-based office because she's in charge of the training for province wide government agency she works for here in Nova Scotia. As a side note you would love the Cape Breton highlands as a destination for your bike vacations. One of the most beautiful places on earth, I grew up here and it's beauty still makes me feel in awe and reinforces the fact of how small us as humans are compared to the vastness of nature and it's ability to create things more impressive than anything our hobby can achieve.
@jstro-hobbytech 2 роки тому
@Andreas Spiess pardon?
@AndreasSpiess 2 роки тому
A spammer uses my name and picture. Sorry for that.
@xraken7197 2 роки тому
Is a double MOSFET circuit really necessary to power the board with a signal? I've tried with a low Vgs N-channel MOSFET like RFP30N06LE and it works with the 3.3V signal to drive the MOSFET. The spec sheet diagrams for that MOSFET show that a minimum gate to source voltage of 2.5V should suffice.
@AndreasSpiess 2 роки тому
You are right. I think I mentioned in this or the other video. It often works if you use the right FET.
@Phlupke 2 роки тому
Dear Andreas, Thank you again for this video, I have been following you for years and am grateful to you for your videos which are every time, well edited, well explained and well documented, however they always make me laugh, but that is not of any importance, this is due to your Dhanks instead of thanks, but maybe it is because I am, considering my age, a little deaf. I might want to do this project for my postbox installed in the hall of a building with multiple apartments, but I have a problem with this one, it does not have any open-close feature, it has an open gap, and therefore the readswith is not a good solution, the light swith is not a good solution either, because when it is dark, a lamp lights up every time a person enters the hall, the acoustic sensor is not elsewhere either a good solution, because of the power problem. Do you have any suggestion for me regarding the method and the sensor to use? Vielen Dank oder vielleicht vielen Tank? Regards, Philippe PS: Does it matter if I spend more time than my wife in the kitchen? Best regards to your wife also!
@AndreasSpiess 2 роки тому
As I usually mention: I have a strong Swiss accent which will not change during this life ;-) Concerning the sensor: Here I cannot help because only you know your situation. You just need some changes which can be detected. Some viewers use a load cell on the floor of the box to measure the weight.
@SurajGrewal 2 роки тому
Lucky me, My post office is meters away and I can tell my postman to just press a button for me (If I wanted him to) since I know him personally. I even know the newspaperman since he's also the one who collects the monthly cost.
@AndreasSpiess 2 роки тому
So you have a much more personal service! I never saw the newspaper person because she or he has to deliver the paper very early in the morning. And I know a few of the many postmen. They change a lot.
@bossybill7437 2 роки тому
I don't know if it's just me but in my DIY'ing experience with magnetic reed switches, I've found them to be quite unreliable. What I believe happens, is that the switches are based on a mechanical contact and due to a number of factors (eg, normal wear and accumulation of wear debris, thermal movement, vibrations (such as next door mail box), etc) false alarms are easily triggered. Maybe Andreas' logic can also monitor the duration of the reed switch's trigger 'on' time for a minimum threshold. Alternatively, that little mercury tilt switch, that Andreas showed, could be used instead (should be more reliable). What I do, in my 'reed switch projects', is to use a double trigger. That is, for any single trigger location, I use two switches. For a normally closed, situation, I wire them in parallel such that *_BOTH_* must be triggered *_at the same time;_* or for normally open, wire in series.
@AndreasSpiess 2 роки тому
So far it runs for about 2 month and is used twice a day. I did not know of the problems you describe. But now I know if it starts to create false alarms and I will change to the mercury switch. It already needs a short time to start the ESP and trigger the "hold GPIO". Maybe this is enough debouncing time...
@bossybill7437 2 роки тому
@@AndreasSpiess Yes, if you have some debounce time you should be okay but 2 months is still in the running-in period. My problems started after at least one year or more, then slowly became worse. In any case, that has been my experience. Just something to consider if you start getting false alarms from those switches; or have an older installation (using those switches) and are getting mysterious false alarms.
@MrBobman49 2 роки тому
It's a well documented fact, any contact except gold will deteriorate with time in the atmosphere, and you therefore need to ensure you have a minimum of 20mA to break down the oxidation. Reed switches are often glass encapsulated but I'm sure the $3 variety won't have gold contacts. This is why you see gold plating on edge connectors, etc.
@MrBobman49 2 роки тому
@@AndreasSpiess the mercury switch should solve the oxidation problem.
@MrBobman49 2 роки тому
Although since you are switching ESP32 power, you may exceed the 20mA anyway.
@raywright4012 2 роки тому
Would be interesting to see something like this powered by a supercap, and recharged by small solar panel. Perhaps a weather station on the mountain and it uses a small solar panel to charge. Then send using Lora every ten minutes, the weather conditions. Maybe 2x 50F caps.
@raywright4012 2 роки тому
An infinity sensor. To last maybe 10 years. What minimum size cap would you use? Minimum sized solar panel? Would be a fun project.
@AndreasSpiess 2 роки тому
You can combine Solar and super caps. Maybe not for this dark place, but my awning protector uses such a design. So far I never made a video about that topic. Just on supercaps for a Raspberry Pi.
@raywright4012 2 роки тому
@@AndreasSpiess thanks for the reply Andreas. And of course thanks for making all these wonderful videos. They are very helpful. Woukd love to see a Lora sensor on the mountain using the super caps and an energy harvester. Maybe small solar panel. One that you will never have to replace the power. But is such a device possible? Probably, with a large panel. But we would like a small box with small panel on the box. Anyway, thanks again for your amazing videos.
@max9111 2 роки тому
I am wondering if a simple Zigbee opening detector could have worked in your case. The range of a zigbee object is about 20 m and you could have installed a Zigbee router on your roof. As for your wife, you should inform her that newspapers are also published online and a subscription is usually cheaper. I subscribe to the NYTimes, Les Échos and Corriere sella sera and have never seen their print editions in decades..😀😀
@AndreasSpiess 2 роки тому
1. Zigbee would not work because of the metal case. As I said, I tried simple 433MHz which has a much bigger reach than Zigbee. 2. Online: I think she knows that (ans changed to a Kindle many years ago). But she still likes the old-fashioned newspaper...
@KarimAkors 2 роки тому
i did the same with an battery powered wlan cam,s standby movement function, every time post gets in i got an email with "real mail arrived" and a 3 second video. one time a squirrel was storing there stuff in there and as i got home i got around 31 mails as soon i connected with my home wlan.
@AndreasSpiess 2 роки тому
Interesting animals. Unfortunately, we do not have such animals around our homes. Too crowded for them, I assume.
@McTroyd 2 роки тому
Simple and elegant, as always. But what about the sub-freezing winter weather? I was under the impression lithium batteries won't last when they're frozen...? 👍
@AndreasSpiess 2 роки тому
We will see. The Li-Ion batteries on the roof survived the winter. One died during summer. So I do not know if it was the cold or the heat. In the mailbox there is no charging. On the roof I have solar power. I still have the possibility to go for primary AA cells if it does not work.
@cj_clippy 2 роки тому
I'm curious about the board meant for powering on the LoRa module. Video #388 was mentioned, but I'm not seeing anything about the board in that video. (Video #388 is a vacation announcement.) Is there another video featuring the build?
@AndreasSpiess 2 роки тому
You are right. I changed numbering and now it is #400
@cj_clippy 2 роки тому
@@AndreasSpiess tyvm!
@BurkenProductions 2 роки тому
0:30 that's why you have mailboxes on your house door and not outside or inside the entrance.
@AndreasSpiess 2 роки тому
The postman is more productive like that.
@izzyramos-gunn9895 2 роки тому
If you put a sensor on the top and bottom that would be better. This way a package in between the two sensors would interrupt them. This way you don't have to press a button to reset it. The door method doesn't quite know if there's mail or not. Or a pressure sensor somehow might work too. Anyways this is a good way too.
@AndreasSpiess 2 роки тому
I do not know how to create a passive sensor on top and on the bottom. A light barrier would need too much energy. Another viewer added a LIDAR inside the box which is triggered after the door is moved. It detects if something is inside the box.
@izzyramos-gunn9895 2 роки тому
@@AndreasSpiessYeah passive is better for lower maintenance
@paulgray1318 2 роки тому
Could you not attach a load of peizo transducers to the inside of the mailbox and into a battery charging circuit. The vibration from traffic etc will produce electricity from the transducers, which would add up over time. Would probably need to charge a capacitor and burst charge the battery, so probably need two cells and circuit to charge one whilst the other is in use...maybe. Just an idea if it's low enough power, maybe doable. Imagine a sensor powered by noise.
@AndreasSpiess 2 роки тому
I once made a video about energy harvesting and I will cover the topic in a future video. It only produces a tiny amount of energy. In the case of the mailbox, fortunately we have no traffic noise and just the movement of the flap would probably not generate enough energy.
@JC.72 2 роки тому
after all these years with esp8266 and esp32, there is still no pre-made boards which has the efficient deep sleep issues resolved?
@AndreasSpiess 2 роки тому
I made video where I compared the boards. But here I needed one with LoRa. It seems that the Cubecell boards are quite good in deep sleep.
@MrBobman49 2 роки тому
@@AndreasSpiess I made the same project as you with a door switch. To solve the power problem, I removed the FTD231 UART, the 3.3V LDR from an ESP32-Dev board, replacing it with a 3.0V LDR. Running it off a standard 18650. I used one of the "wake pins" on the ESP32 to send battery voltage to my cell phone via Twilio.
PricelessToolkit
Переглядів 97 тис.
AuRuM TV
Переглядів 584 тис.
Andreas Spiess
Переглядів 129 тис.
Павел Хмурчик
Переглядів 56 тис.
Thebox - о технике и гаджетах
Переглядів 61 тис.