Today I want to show you a neodymium compromise for the IDOING car radio and show you how to fit a non-fitting head unit into any car.
If the car console can accommodate a 7-8 inch screen. Then this life hack will help you.
Four months ago, IDOING sent a universal car radio with a 10.25-inch screen.
☑ Car radio IDOING 10.25″ - alli.pub/6s6ofd
☑ Steering wheel remote control - alli.pub/6s59ns?erid=Kra23kSez
☑ Neodymium magnet - alli.pub/6s6oez
Android radio is well known, with good hardware. It differs from others in that the car radio has a remote screen. Which can be mounted in almost any convenient place - within the length of the cable. And here the neodymium compromise for the IDOING car radio is perfect
The torpedo and console are made of plastic, so I suggest making the screen mount from two neodymium magnets. This is a brilliant idea that answers the question of how to cram in something that can’t be squeezed in.
The total force of two neodymium magnets is 120 kilograms.
The video shows step by step how to make a car radio screen bracket with your own hands and how to install an Android radio on the dashboard. It turns out to be a really cool homemade product. In the same way, you can install a car radio on the front console.
After he showed how to install a car radio, he showed how to connect an Android radio to the standard connectors with your own hands.
He listed the advantages of the IDOING car radio, one of which is replacement modules for the standard connectors of a large list of cars. Excellent car audio with DSP? with 16 band equalizer/
You can also order a radio with connectors for Ford, Mazda, Honda +2004 or +2007, Mitsubishi, Volkswagen, Hyundai, Toyota, Nissan, and with ISO connectors.
At the end of the video, he showed the equipment and listed the characteristics of the IDOING car radio.
On board 11 Android, 64GB of internal memory, 4GB of RAM, Rockchip PX6 processor, TDA7850 amplifier chip, 4 channels of 50 Chinese watts. 16 band equalizer with DSP. Bluetooth 5.0, Radio with RDS, GPS + GLONASS There is support for Andriod Auto, DAB +, OBD2, rear camera, USB DVR. As you can see, the iron here is good.
As for any brakes or freezes on IDOING car radios with a PX6 processor, I have not yet noticed.
Personally, my opinion is that the radio is really good. If you didn’t have to make a bracket with magnets with your own hands, it wouldn’t have a price. At the very end of the video, the results of the last draw were summed up.
Now you know the neodymium compromise for the IDOING car radio, and you know how to fit in something that can’t be squeezed in. I hope you liked this cool homemade product made from neodymium magnets.
The video was prepared for you by the author of the channel 1000 DIY's and Advice - 1000 DIY CRAFTS AND TIPS See you in new videos!