Thank You To Everyone Who Watched My Video. Please Subscribe And Support The Channel

Идея для узора хорошая , но сверху надо стекло или эпоксидку . Чтобы тонкие полоски не согнулись , при попадании влаги и солнца .👍👍👍

The hardware store metal L brackets with drywall screws was a nice touch.

What an awesome design concept... Such a shame about the joins not being finished properly and the tabletop not being level. With woodworking, it always pays to be patient and work slowly. When working joins, take your time and ensure they seat fully. "Measure twice, cut once".

I love everything about your shop, your design, and your craftsmanship. I hate it when someone spends a lot of time on a tabletop, only to put metal "hairpin" legs on it. You put effort into your leg system. Two thumbs up. Thank you.

This is absolutely the most jaw dropping table I have seen. There was no template just his vision. As for all the comments, making it level easy, the joins what are you going to do eat looking under the table? Everyone here watched this because it was art in the making. If you want to make something perfect, then by all means plug in the design in a computer. If you want something that not only looks great but is made by hand, then go to a glass blower or a man like this to get a table that will always turn heads. Keep the negative comments to yourself and praise this man for doing art right before our eyes.

Would love to see this with a dark stain, colored epoxy in the groves and a glass top. Great work!

Nice work. Only thing is it looks about 3/4 of the way complete. A little blue or green resin would take it the rest of the way.

It's a neat design and concept. (Keep working on the joinery though). The metal angle brackets and sheetrock screws were killing me.

I think the top was shaped for an almond or oval table. Also the bottom shelf doesn’t go with that style top. Each are very nice on their own. I think that would be sweet as an epoxy project.

Lovely job, but was anybody else waiting for a coloured epoxy fill in the slots ? Not criticising in the least, but I think I'd have done that with a stronger colour stain for my taste. Interesting design, though.

Bàn có mẫu mã mới mẻ, đẹp độc đáo, đường nét mới lạ thật hài hòa ! Bác thợ tay nghề thật xuất sắc !

wow nice table... i would fill the small lined gaps with colloured epoxy....;)

Parabéns, belo trabalho. Obrigado.

Необычно выглядит, но косяков...🤦‍♂🤦‍♂🤦‍♂ - мама не горюй((( Топорная работа, при таком инструментарии......

I don't know which is more impressive -- the genius of the design or the skill of execution. Both came together to make a gorgeous work of art.

the top to this table is just gorgeous.

the next time you do one similar to this pour epoxy into the gaps to close them off but at the same maintaining the beautiful pattern you have created. awesome job

Хороший пример трудоёмкой бессмыслицы!

Задумка класс. Смотреться отлично. По исполнению эта работа мастера любителя, профессионально исполненной работай не назову. А когда увидел крепёжные уголки и стыки , у вы.

You had me until he put drywall screws into those cheap L brackets on the legs. Then I sat here with a scowl on my face for the rest of the video. Also, I thought they would fill the gaps with blue resin to make the table more solid and make the wood strips stand out more. That would make a nice front door if it were solid.

I really like this project of yours. Please use push sticks on the table saw and lower the band saw guard.

maravilha de obra de arte. parabéns 👏🎉. *MESTRE*

Imagine no block just clear epoxy in between! OMG Even more grand and gorgeous.

You make a complicated design look so easy to do. Very well done 👍

A ideia do design foi maravilhoso,adorei,só faltou requintar a obra pra torna-la luxuosa,mas parabéns,muito talentoso,ótimo serviço

Is there a Part 2 where they go back and finish it? Screws in the L braces, table top not flush to the bottom piece, making sure everything is level, etc ... Table has so much more potential. I'd put colored expoxy in the gaps. You could get rid of the blocks, doing it right. So much potential and would increase sell value dramatically.

Love the way those strips of wood were incorporated. I learn so much as I see what is possible here.

Beautiful table. Curved detail looks like large leaves.

Excelente trabajo gracias por compartir bendiciones

Так хорошо начали делать и так изговняли креплением ножек и уголков. Такие зазоры - позорище, а уж торчащие наружу шляпки шурупов просто финиш.

Love the top. Would look cool filled with black epoxy. Great job

Güzel ama üst tarafa epoksi uygulaması yapılsa daha iyi olurdu

Love that table. I think it might be interesting if you had used something like blue tinted epoxy in-between the slats of the table top

The finish, and work on the Table, are in the low end of craftmanship.

Americans are really smart, their work is worth emulating 👍👍👍❤️🙏

I like wood working. ❤

Great design. Would have been better in a wood without knots. I think if the spaces on the table were filled with resin it would have amped up the design even more. Love watching woodworking, thanks.

I would have definitely have made that for something to hang on the wall. It's absolutely beautiful

Almost there. Suggestions follow 1. Needs to be planed for being level and flat before it base is installed. 2. Ya, better attachment brackets and not drywall screws. 3. Fill the middle with epoxy square blocks rather than the wood ones, then fill the middle with epoxy

If this is a table, I'm not a human 😮

I like the way that table flows is so beautiful and graceful truly a work of art

That would make for a great gardening table! The slates above can easily have dirt fall below.

I love the table, but all I could watch was how huge this guys hands are!

Stunning. Piece of Artwork, for sure.

Я думал внутренняя часть будет заливаться эпоксидной смолой и кубики убираться,идея хорошая но мелкие вещи будут проваливаться а в узоре со временем будет накапливаться грязь и жир

A beautiful table great job . I'd like to see another version of this with a removable set inlay of acrylic glass .

Wonderful! I can imagine the same art done with epoxy!

I like, and beautiful. Practically self cleaning, too. No need to wipe it off after use, just shove the crumbs through the slots right to the floor!

From the beginning of the this video, I went too far, because I thought you will do a model of an architectural design looking like the designs of the famous Iraqi architect "Zaha Hadid", this woodwork looking like her design of a stadium in Qatar. But you inspired me ,I love your work, please don't stop Woodwork 💚

Very good, unique furniture. A beautiful work of art

😮😮😮... Deux situations pour travailler sur cet élément 🙂😉 d'une grande noblesse ''' le bois ''''... Le manipulateur ce génie.... ébéniste ou menuisier.... Avec ses mains ✋🙌🙌 manipuler cet élément selon ce qu'il veut en faire ou créer ce dont il a envie.... En prenant des risques au vu de toutes ces dangereuses scies.... Bravo l'inventeur pour ce très beau travail 😊😊😊❤❤❤😊😊😊☺️☺️❤❤.

Beautiful creations on the table top

Design for an outdoor table is great. Wood type, fit, and finish no so much. Should be Teak or Ipe wood. Layout should have ensured you did not have any nails on the cut line. Use pocket hole screws instead of angle brackets to hold the top on. Lastly, an oil finish is best for outside pieces as it's easy to repair and maintain in the future.

Надо было б ещё столешку залить эпоксидкой,вообще класно получилось бы!!!

Beautiful idea on the top. I can't help but feel like the end product came off cheap looking. The table could've been much larger to show off the design on top. I would steam those bends and then dry them to make them hold their shape and then maybe insulate them and remove those blocks that were holding in place. The legs and bottom rack have to go. The screws!! Sigh!! The screws killed me.

Весь центр столешницы держится только на гвоздиках из степлера,при давлении сверху все развалится к бабушке люцика.Да и положить что то мелкое на стол не получится,постоянно будешь ползать под стол,доставать.Момент с железными уголками ваще ад .

This makes me happy! ❤

Ingenious and very beautiful! I would love to own that table!!

Nice work...much more creative than the "epoxy river" table dudes who know nothing about wood working...

The design is interesting but the execution is substandard. Working fast is not the same as working well. It could have been a perfect and beautiful table.

Very pretty table and excellent design - just one little criticism, could you not afford a box of japanned round head screws for the angle pieces!!!!!

I note the flashes of sparks as they were sanding the curved ends of the tables and sanded through one of the 60-80 brads(20 strips, 3-4 brads in each end nailing the strips in place) in each end of the table. Hopefully they kept on sanding until the exposed brad was fully ground away. That said...it's an interesting design, begging for a glass top to make it practical.

Sangat bagus hasilnya, kreatif sekali semoga sukses 🙏🙏👍

Parabéns meu amigo que Deus abençoe sempre sua vida

Your table is beautiful...BRAVO....!!!!!!!!!!!

Всё так красиво начиналось.... и так стремно шурупы закрутил))

second thouths ive rerated your works its really a 10 out of 10 alot of work gone into that table thanks for showing how its done..

This table is beautiful. You are talented. Thank you for sharing your art.

Хочу посмотреть как будут чистить через год грязь между полосками....

Muito bom trabalho parabéns pra vc e sua equipe 🇧🇷🇧🇷🇧🇷

Having all the tools, it is very untidy, the finishes leave something to be desired, from a distance it looks good, up close there is a lot of work left.

بسم الله ما شاء الله. قمه الابداع👍👏👏👏😍

I'd like to see them Countersink the screws put resin within the openings of the top table maybe a deep cobalt blue resin and see what that looks like?

Идея интересная, но, есть вопросы к исполнению и предназначению данного столика. Если стол для дачи, то в таком виде он не прослужит долго. До последнего момента ожидала эпоксидную смолу, которой зальют наборный орнамент из реек. В представленном вами виде стол быстро потеряет свой вид, потрескается и деформируются детали. Грязь из декоративных элементов вы ничем не уберете. Ну а уголки без фасок под шляпки и черные саморезы вызывают чувство неуместности и грубости. Удачи мастеру и процветания каналу!

Do an epoxy pour in the top.

Ficou muito lindo parabéns 👏👏👏👏👏👏👏👏👏

You are so talented and creative! That table is absolutely stunning! Great job! Beautifully done!!

Ну саморезы прям огонь! 😅😅😅

You are very talented and skilful, keep up the good work.

Fabulous table, you make it look so easy. I was also waiting for the resin, but still love it.

That's a nice design, but it deserves better than the half-assed joinery (and metal brackets held with DRYWALL screws!) that you used to attach the legs.

I liked this so much I built it last weekend

Muy bueno tu trabajo amigo, felicitaciones, abrazo desde Tierra del Fuego 🇦🇷

I am soooooo impressed. Loved it

Красиво. Я думал,что пустоты будут заполнены композитной смолой.

I like it but I prefer to fill the gaps with epoxy so that the gaps will not be filled with dirt or dust.

Lagyan ng glass on top,may pares nga upoan ,swak❤😊

I was waiting for you to pour, like a blue resin in the table, then run the entire thing though a belt sander, and polish it. Looks cool though

Really beautiful table. Great work. The design is wonderful

Pure talent and art!!

very pretty, somehow I get a fish vibe from the design and shapes. It would be a very nice table to present a nice seafood banquet on.

Good for far, far from good. Definitely got the Chinese treatment. Worth about $150

I'm speechless 😁 I love your work

Love this video thanks for uploading :)

It is such a wonderfully beautiful piece. I would also love to see the concept done in a more refined piece for indoors. IE a coffee table.

فكرة جميلة جداً تسلم الايادي

Классная работа, но саморезы по металлу в дерево, да и сами "уголки" это жесть

Nice Design. But Quality of Work can be improved alot.

Impressed immediately by the design and the attention to detail during fabrication. But then you lost me when you used steel L brackets n drywall screws.. Better options that would compliment all your hard work..