Attention: There is a mistake in video, operating frequency of module is not 2.4 Mhz as declared but 2.4 Ghz. Sorry about that!

well finaly someone explaining what line in code does what, most of those tutorials are "copy paste my setup and learn yourself with no clue". good job

Thank you! An excellent and logically presented tutorial. Has inspired me to start my own experiments.

Thankyou Sir for such a clear, concise and easy to understand tutorial. You covered so many aspects which I was not sure about and have undoubtably saved me a lot of time and expense.

very good video with clear cut explaination. Good job, keep it up.

Great video man! Good and fast introduction to these modules. New sub!

Couldn't be better, thank you. Excellent tutorial and explanation.

Very clear and clean video. Thank you

This code serves as a basic outline for anyone to modify it to their needs. Great job

Man, thank you very much! From Kazakhstan) in russian youtube i haven't find so clear and clean video

Have watched this video several times now, referencing the information. Great video!

Very well presented. Thank you!

works 100%...as i didnt have the buzzer, so i replaced my code for led blinking to show that data is still being received by the receiver. Awesome and thanks!

thanks, bro, I finally got a smile on my face. keep making these videoes, all the best for monetization.

Thanks for that vert well made tutorial and code explain about the nrf24 modules, you saved my life, almost for now haha thank you very much dude

Thank you so much sir. I absolutely understand and I tried it with the help of your vedio. Thanks a lots sir.

Hello Tehno Manik, Thank you for a great video.

EXCELENT BRO.. YOU ARE VERY SMART.. THANK YOU VERY MUCH AND CONGRATULATION...

Top Video and easy to follow you! Well done!

Excellent tutorial, i learn a lot. Thank you

Very good tutorial. Well explained code unlike in other tutorials on youtube

Thanks a lot man. It has really been a big help.

Thanks for the video. It was quite informative and well done.

this worked great thanks for your contributions sir!

Great video. Good explanation.. Keep the videos coming. You have a new sub

Good video ...it was clear and neat . thanks for the video

this is the best tutorial about NRF24l01

Thank you very much!!!! Unlike others, this video was very helpful and extremely easy to follow!! I have a quick question, if you don't mind. When you performed the range test how did you power the units? Were you connected to a laptop or did you use a battery power source, if so what did you use? Thank you again for taking the time to make this great video

Perfekt video and explanation. Thank you very much

Super Helpful Tutorial!! Thank you very much! 👍👍👍

Thanks so much for the amazing tutorial! I finally got my NRF24 working!

Is there a way to pair rc receiver to arduino transmitter, I want an rc receiver because of how compact and cheap it is and also the wide voltage range I can input to it

Kudos - Very well done.

This is a really good video. Good job, and thank you.

Mega useful thanks buddy new subscriber.

Hi - what data speeds were you using for the range test please? (I see fastest 2Mb knocks back RX sensitivity a lot). I have also subscribed as it is a really good, clear video.

Best tutorial ever !

Thanks alot! You are very good at explaining. Subscribed! 👍

Very concise, I like the this makes it work here you go, run with it.

Thank you very much, you helped me a lot

Also I forgot to ask, do you have experience with the HC-12 modules? If so, will you share your experience and also will you make a comparison video, please?

Very good video, thanks man!

My name is Mahamad. I am from Malaysia. Your video is simple and easy to understand. I am very interested in using the NRF 24L01 as voice transmitter and video transmitter. But I dont know how to program it. Can the source code you give work with the arduino nano /mini pro and uno base ? Thank you very much for your effort to make such a good video for International / global audiance .

Well presented. Thanks from Indonesia

A Very good video

Good instructions. It would be useful to attach a reference to the library (). Not everyone has everything installed. To write "nRF24L01.h"

hello good video, do you have any video with the MQ-135 sensor with this antenna?

thankyou very much Sir, it was really alot helpful in clearing my some misconceptions.

THANK YOU VERY MUCH NICE VIDOE HOPE YOU DO MORE.

Thanks for this excellent video...

Se eu tiver esse adaptador não preciso colocar o capacitor entre o VCC e GND?

Hi.. Im having trouble with my project. Using 2 arduino , I want to make a traffic control system with red and green LED which will light up if the Ultrasonic sensor detect an object (car). I want the system to work wireless using nrf24l01. When the first green LED turn on(for 1 min), the second green LED on the other arduino should turn off (red is on) even if its Ultrasonic sensor detect an object. It can only turn green after 5 second the first red LED turn on while the green was off. Can u help me with the program?

Excelente vídeo, muchas gracias por compartir. Me costo un poco, mi ingles es muy malo, pero algo entendí. Saludos cordiales desde Perú.

What is the min distance between the transmitter and reciever to test the units are working?

Good video tutorial! It eliminated many doubts of mine. Easy to understand. I understood even though I didn't know English. Congratulations and thank you very much! I'm César Augusto Becker from Brazil.

Very Clear Tutorial Thanks

Nice job, impressive range for 2.4 GHz, considering Bluetooth and 802.11 LAN reach 100m. Any idea why the range with NRF24 is greater?

your the best ...really good video very clear ,thanks

Thank you nice video. Was very good explained, y had errors before i now why now

Which capacitor value we use

Thanks it is a very useful video, nice 😊😊

So I followed the same setup in the video with same hardware and same code. Yet the buzzer goes off constantly instead of at intervals, and it does this whether or not the receiver is off. I've tried a different tutorial and still nothing works. Any ideas of what may be wrong?

great video, is it possible to send video signal with this system?

muito bom, vc teria um exemplo bidirecional (tranceiver) ?

Thank you sir, working fine

Thanks for Your tutorial. For today I had a problem to connect nrf24l01with UNO. ;-)

Your code works with the standard nrf24l01 but not with NRF24L01+PA+LNA SMA Wireless Antenna Transceiver. What am I missing here? Or maybe the NRF24L01+PA+LNA SMA set I bought is faulty!!

I'm designing a yegi antenna for nrf24l01 modules! How much renge will we get? What you think?

my buzzer doesn't delay, it's just a solid tone. Even when only the receiver is powered . Anyone have any idea why>

Can i transmit video data with these modules ??

I tested them up to a distance of 1500m @250kbps channel 100 (2.500 GHz). At this high frequency there is no interference from wifi!

hii...i've successed using nrf24 with internal antena, but when i try to using nrf24 with external antena, function isChipConnected( ) always return false / zero. what should i do?

Excelente vídeo

thanks man !!!

*THANK YOU SO MUCH* ....Your video tutorial helped me a lot and I'm so happy that I can't explain in word. Thank You Thank You so much ......

Hi, I would like to know if the NRF24L01 with antenna can work without Base Module?

How can you add someting in your transmitted data like 2 float variables ?

Is it possible to have one tx and multiple rx?

Very cool tutorial

Sir I have a question? Can you pass a 125khz RFID signal with these

Hi I had a little question do you think it works if we control it from home knowing that I control it from a lap of about 40 m and that the receiver is still in motion at 20 cm from the ground In the middle of town?

keep it up bro....👌👌👍

Just purchased a pair of these on Amazon. But, I want to use them with ESP32/8266 MCUs and RPi Compute Modules, preferably with Python and/or microPython. But, I'm not finding much info nor YT videos on these configurations. Only Arduino & IDE.🤔

Do you still need adapter if you're going to connect NRF to NodeMCU or ESP32 which has 3.3v output?

How does datarate affect range? 250kbps vs 1Mbps vs 2Mbps

How did you investigate the data loss?

thanks what is the name of the base module

If we put the transmitter inside a house, and put the receiver outside, theoretically how much range can we get?

good Job gentleman hope your are continue :)

Can Bluetooth signals be detected and a ring is emitted when detected by these electronic parts?

Thank you for the video it has helped me on my project. What software did you use to test the range?

nice job, what is the maximum frequency we can transmit between tow module NRF24L01

Could anyone control D10 in pwm mode when use this rf module?

keep it up bro....

very good video, thank you

Hello! I have an arduino uno and an arduino nano. I have uploaded the code of transmitter in arduino uno and for the receiver in arduino nano (in different pins) nd instead of a buzzer i placed a led ,but it doesnt work. Why is that happening? Thank you in advance!

What specific base module you are talking about, can't find them online

Like it, very useful.

Is it can be multiprotocol?

Thanks a lot, with this video I could did a behavior test and I could saw a perfect behavior with my modules. thank you !! another thing, you know how send analog values with these modules, for example send potentiometer values or a some temp sensor values? regards!