ATmega328 and PlatformIO

ATmega328 and PlatformIO - no Arduino!

2 роки тому

Should I abandon Microchip (Atmel) Studio for programming AVR microcontrollers?
PlatformIO, an extension for VSCode, allows not only to program Arduino code, but also plain avr-gcc including the upload with an USBasp programmer.
A student of mine showed me how to configure platformio and I had to find out that the avrdude which comes with platformio is somewhat limited in its functionality.
The necessary changes to the project's platformio.ini which I used in the video are:
[env:ATmega328P]
platform = atmelavr
board = ATmega328P
board_build.f_cpu = 1000000UL
upload_protocol = custom
upload_flags = -pm328p
-Pusb
-B4
-cusbasp
upload_command = "C:\Program Files (x86)\AVRDUDESS\avrdude.exe" $UPLOAD_FLAGS -U flash:w:$SOURCE:i

КОМЕНТАРІ: 24

@siegmundeurades5753 Рік тому

I couldn't figure out why PlatformIO and AVRdude weren't playing nice with each other, I was just about done trying when I found this video. Good explanations and very useful information!

@shubhamforme3 Рік тому

Thanks it was much needed , was searching for the same everywhere , very well explained.

@Patten42 7 місяців тому

"I know I write code, I don't need comment" 😂Thanx for the tutorial!

@fransrademacher2877 2 роки тому

Tack Uwe!! du är bäst!!!

@zdzisiekkolmaga6383 Рік тому

Thanks a lot, your video saves a lot of my time. I am just switching from Arduino IDE to PlatformIO.

@Jptoutant 7 місяців тому

Hey sir GREAT video! Btw what is the programmer you use to flash the chip? I would like to find an alternative to the expensive Atmel Ice

@uwezimmermann5427 7 місяців тому

I have my own construction based on Thomas Fischl's USBasp which is open source. There a lot of commercial clones of the USBasp available from Aliexpress, eBay etc. They cost somewhere between 3$ and 10$

@eroltube100 Рік тому

Thank you for good explanations. I wonder whether I can use simulate this led blinking under platformio? (I use linux.)

@uwezimmermann5427 Рік тому

It is very difficult to realistically simulate microcontroller code. The microcontroller is supposed to react to events from the outside in realtime... There are emulation/simulation tolls around, but as far as I know none is integrated into PlatformIO.

@eroltube100 Рік тому

@@uwezimmermann5427 Thank you

@viniciuslongo4622 10 місяців тому

worked like a charm in Ubuntu, thanks!

@comod 4 місяці тому

With the same tweaks or out of the box?

@Omar.bin.khattab Рік тому

thanks so much , can you help me !! how can i set linker options like (-wl,-u,vfprintf) to support floating inside platormio using vscode

@uwezimmermann5427 Рік тому

I haven't tried it yet, but I am just starting again for this autumn now with my students, so I might soon have a chance to explore it more... But essentially you should be able to add build_flags in platformio.ini docs.platformio.org/en/latest/projectconf/section_env_build.html#projectconf-build-flags

@Omar.bin.khattab Рік тому

@@uwezimmermann5427 thanks so much

@sto2779 10 місяців тому

4:24 - "board_build.f_cpu" is part of the AVR's SDK syntax?

@uwezimmermann5427 10 місяців тому

it's part of the PlatformIO configuration syntax, but essentially it sets the F_CPU macro in gcc.

@skmplanet9591 Рік тому

Can you please tell me how program AT89S52 using platformio in linux without kiel

@uwezimmermann5427 Рік тому

Sorry, no, I have no experience with x52-microcontrollers. Everything is different from the AVR-family.

@nurbektech Рік тому

Hi! how to make in macos with attiny13 microcontroller?

@uwezimmermann5427 Рік тому

Firstly, I don't know why anyone would want to program something using a Mac... Secondly, you start a new project in VSCode/PlatformIO and select ATtiny13 as a platform. All you then need is a programmer which is supported by avrdude, grant the necessary access (however that is done on a Mac I don't know, but you can try the different Linux-tips from my previous videos), connect the ATtiny to the programmer's MOSI/MISO/SCK and flash your code.

@dominicamoakobaah9516 Рік тому

How close is this to CMake?

@uwezimmermann5427 Рік тому

I have absolutely no insight into CMake, but in this video I present a plugin to VSCode - a complete IDE, which can be easily used even by people who feel uncomfortable on the commandline. I would say it has nothing to do with CMake and is not comparable in any way - apart from the fact that both can be used to produce code.