Get a high quality wallet, belt or MORE in the Rose Anvil shop here - bit.ly/44jXLNu

Had my cat boots for about 6 years now. They're battered, scuffed and smell like hell but still solid as when I bought them. £50 sterling, worth every penny and I'll be buying them again.

I've worn both to work; the CATs were lighter, but the traction got significantly worse than the Timberlands when it was below freezing outside on pavement. The Timberlands were more comfortable on concrete, but felt like lead weights. My insoles wore out pretty quickly, along with the inside heel area (I think that's probably due to my pronation/supination). Overall, I'd wear the CATs on dirt, and the Timberlands on concrete

For the waterproof test maybe you could get a dry weight of the boot filled with a rice-filled sock, let them soak in the water using the rice sock to weigh it down, then weigh it all again afterwards to accurately measure the water infiltration/absorption of the boot materials. I’m actually impressed by this Timberland boot after seeing some of other cheap work boots that can’t justify the price points.

I can assure you guys, here in Ohio, construction absolutely continues through the winter LOL. I love my insulation! [and a pair of thin sweat wicking socks + wool socks] With that said, I wore TimPros all throughout my time working in construction, and I never noticed them getting too hot on 90° days. I mean, they're insulated so they hold a little heat of course, but they're certainly usable enough on hot summer days to justify getting insulated boots for the cold winter days. I've never been desperate to get a second pair of boots for hot weather use, though it would've been nice. No complaints about Tim Pros though, they hold up well, are really comfortable, and I never thought about them until it was time to take them off - which is about the best compliment I can give footwear

The Timberland Pro for me has been a complete success in the field. I’m a general contractor, outdoor guy and live on a farm. I’ve work all kinds of boots and there are by far my favourite. They look clean and classic and yet can handle so much. They wear far beyond their weight class. Seriously impressed and now wear these as my go to work boots everyday. I even had an exceptionally good experience with Timberland Canada. I was just under 1 year of use when I noticed the upper separated from the sole. After sending photos Timberland sent a brand new pair of boots under warranty. They have my loyalty sealed with that gesture. Lastly in terms of fit and comfort... steel or alloy toes can often be a sock killer. And when you wear nice Marino wool socks this can be a big suck. My hard toe Blunnies left dozens of sad socks to be relegated to the bottom of the drawer until I learn to darn. These Timberlands have not done that. In fact they are incredibly comfortable and I was not surprised but very appreciative to see that indeed the centre of this boot has so much absorption. Great flex and comfortable bed allows for happy wearing all day. Thanks for the review well done!

Used to wear those CATs (non steel-toe version) as my everyday boots and both pairs I owned lasted an insane amount of time. Like, years and years. For the price they seem to be very high quality boots.

My father used to work for Caterpillar at their headquarters in Peoria Illinois. He was in advertising and his boss was in charge of CAT branded merchandise (toys, shirts, hats, and shoes). At that time all CAT branded work boots were manufactured by Wolverine Shoes.

I highly value a Goodyear welt because in my experience they hold up a ton better. I like the Caterpillar design better but I know Timberland boots tend to be really comfortable and long lasting for what they are. I would love to see you review a pair of Ever Boots "Tank" boots. I bought a pair and have been super impressed with them so far.

Weston does put out one of the most informative footwear videos out there. All from cutting them in half. Thank you.

I've used the timberland pro hypercharge, and it's amazing. I used it in a factory job in a walk in blaster, and I used it for 18 months and it could do it again.

It's always cool to see the inside and know what you're really standing on but every time, it hurts a little to see potentially a good boot get ripped up. Sometimes you need a necessary evil to find the right boot

Loved this video! Boots keep getting more expensive and they aren't getting any better so you have more and more people buying with budget over performance. Good to see where those intersect. Thanks guys!

"Moisture wicking anti-smell" being on a product means in practice "This product is made of a particular type of durable polyester that traps moisture and that bacteria LOVE, and we don't even think we could sell it without a special breathable weave, and coating it in a temporary coating of antimicrobial silver, the odor was SO bad". It usually means the exact opposite of "This product has less smell than competitors" or "This product has less smell than the products you got 20 years ago".

CATs are workhorses. Great durability and comfort for the price point. I had a pair that I loved and wore almost daily for six months. I sacrificed them to a family member who works in landscaping, after her dog destroyed her boots. She got another year out of them, and they’re still not in the worst shape considering. Unless you need the waterproofing, I think CATs are an excellent buy.

I love your cat so much, thank you for not kicking them out when you film. seeing them in your videos brightens my day.

Can we get some videos on the standard issue boots for the military. The Bates (US Navy) they issue at boot camp are terrible and I'm curious to see how bad they are. I know a lot of guys at work who are looking for better option. Plus I'm curious how the other branches standard issue boots stack up.

I'd like to see a comparison of women's and men's versions of work boots. I've seen what at least appears to be some pretty big difference between the two for the "same" shoe

I had the Timberlands, and after a year, the uppers still had plenty of wear still in them, but the soles wore down to the point where they started letting water through. Fortunately, I got them for half price, so I was happy enough with them. And I will buy them again for that price but definitely not $150.

I bought a pair of CAT back in 97 and still wear them today. Don't know if the quality was different at the time, but they are just indestructible. The model is different from the one from the video, but I bought them something like $70 back then. I've been wearing them time to time during winters for more than 2 decades. I also have a pair of Timberland but I doubt they will stand 25 years

I bought the cat boots twice. The first time I had no issues no leaking no discomfort and they lasted almost a year. So when I bought my second pair I didn't make it 50ft in the rain and my feet was soaked and something in the heel area that caused me to have severe discomfort. So I returned them thinking that pair was faulty and got another pair. Unfortunately they did the same which was disappointing because I really liked my first pair and was affordable. What a difference a year makes. And even now after only wearing the second pair for no longer than a month my heal still hurts. I've never tried the timberlands I don't like the colors offered. Just so everyone knows the ones I had wasn't steel toe and was suppose to be waterproof. Same name boots without steel toe.

I've been waiting for this video. Lots of mixed reviews on reddit about the caterpillars so I waned to see your full breakdown. Thank you making this happen. Keep up the good work!

I had multiple pairs of the CAT second shift boots before I could afford Redwings. They are a great boot for the money, very durable. They can be water proofed by applying mink oil every few months. Not the lightest or most comfortable, but if you're looking for an affordable boot that just works, you can't go wrong with the CATs.

Nick is all over my favorite channels these days! ❤️

My last two pair of boots were Tim Pros, and for the last 4 years I've been wearing CAT Excavator XLs, working in the construction world. They've held up and worn like iron, however the sole is starting to detach from the welt up front, and tear in the back. I've neglected the hell out of them too. I'm going back to Tims for my next pair (Gridworks Moc Toe), and will likely be buying Red Wings or Thorogoods for my casual pair.

I've had two pairs of CAT boots in recent years - the Generator and the Endure. Both were very comfortable, but didn't last as long as other similarly priced boots that I have used. I've had the same job for over 15 years so I feel that my expectation of a boot's longevity for my work is realistic. I generally now stick to Timberland Pro and Keen.

I actually have the timberland pros but with the steel toe. I would have to walk almost ten miles a day on rock and gravel with them and they’ve held up for over four years. This place also got super hot like a heat index of above 120 so they did get hot but it wasn’t unbearable. I like them, but I did get the wide version so it might be better for my foot to spread out with all of the walking. They have a good amount of flex and support, on top of the already pretty good protection. I can’t afford super expensive boots so I don’t know what I’m missing but these things are 10/10 indestructible and great for walking.

I have worn CAT for years. Always sprayed them with a hiking liquid from a camping shop to make them waterproof. Never had wet feet.

Tim Pros here (full tan not Nubuck). They have been waterproof and have held up remarkably well. Extremely comfortable. The insulation has not been a problem whatsoever. Highly recommended.

I always really loved my caterpillars after break in. Only complaint is my wide feet require finding wide boots, which used to be more difficult than it is now

Short story: Love my CAT's, great value, great all around work boot, would buy again, would recommend! Long story: I've had my soft toe CAT Second Shift's for about 4 years now, and they've been going strong. Got them for just under $80 on Amazon, and couldn't be happier with the value. They were fairly uncomfortable at first to break in, had to massage them a little and wear them on and off, but after about 2 weeks or so, it wasn't a problem. They are definitely firm under foot, but definitely supportive and comfortable enough for a full workday. They currently fit me like a glove, with a little more wiggle room I'm used to in the toe, but it doesn't bother me and actually makes them comfier the wear. Lacing system was a little odd at first, feeling like the laces started too high and that I couldn't tighten further down the boot, but proved to be a non-issue. You can really snug them up like how I prefer, or wear them loose, comfortable either way. Love the fact that the top has two sets of speed hooks, makes taking on and off quick, easy, and customizable. Leather has held up great, very resilient to abrasion and kicking around, has seen everything from mud, dust and dirt, to pool cleaning chemicals, to automotive fluids, and etc. Only cleaned them and conditioned them a handful of times, and they clean up pretty well. Kept out the water well enough to get rained on or step in shallow water for a bit, but would soak thru over time. Would usually dry pretty quickly though, and never experienced any bad smell, just your typical used shoe smell. Outsole has good grip, is flexible (after breaking in), stable, and has plenty of tread, and never tore any chucks out. The stitching on the toe has definitely done it's job and won't let go of the outsole, even with the bottom of the toe clearly worn down. Only real gripes: On one of the boots early on, the upper separated from the cushioned cuff by the eyestay, glued and sewed it back together, has been holding ever since. Other boot began to do the same at about the 3 year mark, but haven't bothered to fix it, and frankly hasn't affected the boot or fit negatively. Laces lasted about a year, but that's not a big deal. Back of the heel wore thru at about the 3 year mark, but hasn't caused any discomfort. Welt started to separate a bit from the outsole on the instep on both boots exposing the midsole, probably around the 3-3.5 year mark, makes the bottom of the boot waterproof for about 10 seconds, still works just fine in the dry. All in all, would absolutely buy again, assuming they haven't cheaped out anything in the past 4 years. Would definitely recommend if you don't mind a firm foot bed. Also, it's a good looking work boot in my opinion. This boot definitely deserves the CATERPILLAR name, and the cute little embossed bulldozer on the outside of the heel!

Such good videos man! I didn’t even know I liked boot content 😂😂 I wear timberland pro composite tow work boots helix HD in Australia and there great. It gets into the mid 40c (115f) temps out here in summer and I can’t say I’ve ever had issues with my feet getting too hot from insulated boots haha. Good luck with your channel!! 👌🏼👌🏼

When I was a rookie in construction I use to buy the timberland pro resistors they use to leave my flat feet aching 😫 thank God for thorogoods

I had the Timberland Pro's for 2 weeks before they fell apart on me. Once I moved up to the Timberland Boondock Pro's with the toe caps, they've been amazing and are going on 3 years of use still holding up.

8:24 Well he ordered a cat!.. so the cat came up! 😹😹😹

I use that exact same model of CAT boots for my work. They are good for now. Even in NYC winters, they are okay, although need insulated socks for freezing temperatures. They held up pretty good even after 1.5 years.

good to have the team back, great video

I have the steel toe timberland pro and they're great. Really solid and comfortable.

Timberland pro are by far the most comfortable boots I’ve worn on the job site.

Rose I watch your videos and Im amazed by the quality of them. Just an idea tought: how about cutting some oxfords in half for us?:)

Thanks for this! I am looking for a new pair of winter boots. I do a lot of walking, not wearing this for a job but still like to be comfortable and warm. Also something somewhat stylish is always a plus! I am in the market for new winter boots. This video basically convinced me to get Timberland Pros!

Great review! The Cat Colorados have no steel toe, similar to the Timberlands you tested. I work in Construction and I can attest for the commfort of Caterpillar boots and steel toe sneakers. I got some Cat Power Plant, a bit more expensive than the second shift (for boots that will really get trashed) and they are more waterproof.

I wear CAT as they are much cheaper than Timberland where I live. 5 years and still going strong. Oh and mine are a waterproof model

I used to live and breathe Redwing for work boots (28 yrs in concrete as a Mixer driver/ concrete pump operator). I switch to the Timberland Pro Boondock boot in 2015, and have never looked back. The comfort and durability have me recently purchasing my 9th pair. Concrete is brutal on leather, and to reliably get 1 to 1.5 seasons from the Timberland Pro Boondock has made me a loyal supporter of this boot.

Great Video & I always like it when you two get together.

Love your content you make choosing a good boot a lot easier. On the other hand it sucks that people have to go thru all this just to know what's good or bad. I wish boot company's were more honest about what they make. Idk

Had some cats for about 4 years now they’re surprisingly comfortable after broken in They’re one of the only pairs of boots I have that won’t tire my feet after walking all day For the price they’re amazing

I was waiting for a cat and timberland pro cut in half, great video!

Love my Cat Revolvers. I spend long days in them on stone, concrete, and dirt. On their 4th year and going strong, the soles show little wear other than some cuts and gouges from kicking shovels and walking on sharp rocks and bits of metal. I clean with saddle soap about once a year and follow up with a little bick 4 then mink oil for water resistance. I brush when I remember to, and use a boothbrush to wash mud out of the stitch when needed. The leather is holding up great and looks better than when new. Not perfect, of course. Cracked the welt (plastic) at the toes a little by kicking rocks (to shed dirt and mud), fixed with boot glue and changed my habits a bit and they've been perfectly fine since. I wish the material over the heel counter wasn't plastic. It's cracked up, but hasn't impacted wear or comfort though. Would definitely buy again.

I'd love to see you cut the Timberland Boondock (comp toe) in half. I've been wearing my pair daily for 2 years in -20 degree conditions. The soles have finally cracked, but they lasted longer than I thought!

about 6 months ago i got a pair of Thorogood boots from a thrift store, the soles were trashed but the upper in really great condition after i cleaned and conditioned them. I took them to a cobbler to have them resoled and he did a horrible job resoling them, he sanded through atleast 30% of the welt, even sanding through some of the stitching. When I saw them and told the owner I'm not paying for that, he said that's fine and apologized for the crappy job his cobbler had done but he also said usually it wouldn't be a big deal since most guys are bringing in work boots and don't care what they look like as long as they work. I ended up contacting Thorogood and they said they could resole them with the sole of my choice it didn't have to be that Cristy sole and put on a new welt for $155.00

I'm glad you did a video about the Timberland Pro Direct Attach boots. There's not many videos covering that line of boots. I think I'll buy some if the full grain brown ones. I have a pair of the distressed leather premiums and a pair of black nubuck basics.

Good stuff guys!! I'm not sure if you already do this but I think using a hydraulic press with a gauge to test composite/steel toe strength would be a great way to add to your testing procedures.

Had a pair of CAT steel-toes for several years when I was in school. I got them for $60 through a screaming deal on Amazon. They absolutely MURDERED my feet after working in them for a day. Once I graduated and got a real paycheck I treated myself to a pair of Thorogood Moc-toes. I also had the Timberlands from this video in a soft toe. Those were tremendously comfortable and I wore them for years.

In most of Canada it’s winter half the year so yes we like a good insulated boot.

Yes I was waiting for this!

I love both your channels this was really interesting. And I also love the cat! Can’t get enough of the cat

Would love to see ya cut open some Military boots. I've personally worn a pair of Danner Rivot military boots daily since my last deployment in 2012. Best boots I've ever worn. But in general, I've always found them to be a nice mix of cheap, comfortable, long lasting and easy to wear compared to many other normal work boots I've owned.

I am a tech at a CAT dealership and some years ago I had a pair of CAT boots. They were, the most rough, uncomfortable, relentlessly rigid boots I've ever worn. The shock absorption was poor enough that my knees were sore. They were very tough-looking which is likely why I bought them ( I was in my twenties). I moved on to what turned out to be a terrific model of Red Wings which they quit making a few years ago, much to my dismay.

I watch both your channels.great review and video

I've actually had both of these or at least a version of both. I'm currently using the slightly more expensive version of the timberland pros and I've previously used these exact caterpillar boots. I had no problems with either of them but I do like the timberlands a bit more and that might just be because I was able to get a perfect fit because they make these things in an absurd number of sizes. It's kind of crazy how many options there are, whereas the caterpillar ones. I really didn't have that many choices and I ended up with a boot that was about half a size too large and arguably about half a size to narrow A couple of other things about my timberlands versus these. I am fairly certain I have a steel shank in mine as well as mine is stitched down and I don't think it's injection molded but it may be kind of both. I also got a very thick layer of foam that's visible from the outside as opposed to these where they're just covered in rubber and I don't think I have nearly that much insulation

Please make a video on the Redwing Supersole original. My grandpa, dad, and uncle have all worn them as their go to farm work boots for years and I got my first pair for Christmas this year.

Timberland is now my go to work boots. I use to wear keens due to it being much wider, but after awhile I liked the comfortable feel of Timberland. Haven’t gone back to Keen since.

I’ll own the caterpillar watershed for about 8 years now and they hold up great… They’ve been worn basically the whole year and have to deal with a prosthetic foot which stresses shoes heavily. Maybe they Where made to a higher standard but they are a bargain for what they cost me back in the day. Ill love mine and as long as they serve me, i will wear them and if they give up in 10 years or so, theres the exact same pair in my locker just waiting to accede.

Been waiting for this video. I'm totally biased towards the Timberland boots lol. I used to buy the black 6inch direct attach boots when I was in the ope industry. I'd always get two to three years out of a pair before they were ready for the trash. Timberland 6inch Direct attach boots are always comfortable and in hot weather I never had an issue with them. Good boots for the money.

So, I know this is a bit of a stretch out of your area of expertise... But I would love to see you cut up Pleaser and Hella Heels pole dancing boots to see what's inside them. I have the 7 inch Hella Heels and I'm honestly shocked by how comfortable and sturdy they managed to make a 7 inch platform heel. Not sure about how it would go over with your demographic and they're not leather or anything but I am soo curious.

I have that exact pair of Cat boots. In fact I am on my third pair at this point. I work in a shop environment and they hold up really well considering the cost. The issue that I always eventually run into is sole delamination, but this is after a couple years of hard use so I'm not complaining. I would definitely recommend these to anyone looking for a budget steel toe boot.

Timb pro Pitbosses were my saving grace working in a machine shop and later a lumberyard in NY during those nasty Polar Vortex winters a few years back.

Nick's the reason I bought a filson mackinaw cruiser. Great reviews. Carl's great too.

I'd love to see you cut some (more) dedicated hiking boots, especially from brands like Alpina that are a lot cheaper than the big name brands, but seem to make solid boots nonetheless. I want to know if they're cutting corners somewhere.

I have had both brands before and I would go for the Cats any day. Timberland's soles are a death trap over wet tile (at least the model that I had, which claimed that the sole was made out of recycled bottles) also the insole was soft, way too soft to give a proper support the the body causing me knee and ankle soreness. Cats on the other hand were firm but confortable and the style was better

Is very interesting about the Timberland PRO because it is one of the most comfortable boots i have (the shoe box) but at the same time one of the most stiff and strong feel. But i really love it. I dont know if standing all day long in a workplace would be the perfect balance. About the height of the boot is not for looks. If you step on dirt, open fields, debris, etc. it really makes you feel protected for nails, rocks, snakes, scorpions, and things that you can trip on (higher boot less block the movement if you trip) No complaints at all, Love Timberland boots!

I got my first pair of timberlands for standing and walking on my feet 60 hours a week in a factory job and they are absolutely insanely comfortable. I’m not sure I’ll try something different. I was wearing nike running shoes but I’m a bit heavier now so they don’t cut it to hold up my arches and have room for my toes.

I worked as a Carpenter and these CAT boots lasted me for about 9000 work hours, before the outsole cracked. I have to say that for the money they are really fine boots.

Wore a pair of of 8 inch direct attach steel toes for literally everything I did for over a year before they wore out. Really awesome boots and were super comfortable. Would you ever do a teardown of the 8 inch timberland boondock? Almost every contractor where I live wears them.

I have to ask what is many boots as you do do you ever cut yourself in the process of cutting them in half for the videos?? Keep up the great work you are my go to reference for any boots or shoes I buy

Great job guys,,, and Hairless Kitty,,,, I’m owned both,, for work,,, and always have gone back to the Timberland’s…. They last longer, more comfortable, and are waterproof…. 🙃

I wore CAT steel toed boots on the production line at Honda. They were perfect. They wore well and didn't break down very quickly. I think I got about 9 or 10 months out of a pair before I needed to replace them. That seemed perfectly acceptable considering the miles I walked in them every week and the chemicals and agents they came in contact with. Plus, they were very reasonably priced.

Request: Non-slip or slip resistant-soled shoes for kitchen/hospital workers. (especially smooth toe oxfords.) Thanks!

I have the timberland pros soft toe but with a full grain leather. I chose that because I learn more towards a boot that I can more property clean and treat. I’ve had the boots for about a half a year now and I’m a fan. I like the quality for the price. Classic style. I’d recommend them.

I wore through a couple pairs of cat boots doing construction. I thought they worked pretty good and were pretty comfortable for the price point

I can vouch for caterpillar all day. I have had those exact pair and once you get them worn in you will be feeling like they are a part of your feet. And their entire range of of leather work boots that are a little more expensive than the 2nd Shift are the first shoe that my size 12 foot has ever felt good to walk in.

I've worn Cats for work for years , been great for me , I usually resole with a Vibram sole when the original sole wears out, they've always been excellent value and comfortable. The lining quality has gone downhill in the last few years , the Nylon texture visible changed and now doesn't last as long, but still good for the price just a shame they aren't as good as they used to be.

I would love to see you review some Crispi Guides and Kenetrek Mountain Guides. These are the two most popular mountain boots and I believe that a review and cutting them open will benefit a lot of people.

Super nice video Make more videos like this, affordable and really easy working shoes or boots with metal or composite toe Really good point at the end about breathability 👍👍👍👍👍

I've had a pair of CAT books for over 20 years and they are great. For climbing up onto heavy machinery the better support of the steel mid sole is great, particularly when the steps don't allow any support on the heel.

I've owned both and I feel the timberland boots are more comfortable but the cat boots seemed to not tear as much. Both made it past the 1 year mark.

I bought the cats recently. Very comfy and felt less heavy compared to timberland Quite pleased with them

I've been wearing Timberlind Pro (Endurance) work boots for several years now because they were one of the only options I found with steel toe, AND puncture rated steel shank. I work in tree service and we have some crazy huge 3+inch thorns around here(AZ desert) that will puncture normal soles and tires. The boots hold up well for me under pretty hard use. I replace the insole after 4-6months and after a couple insoles I just replace the boots ~every year. I think the foam mid-sole just breaks down and I have ankle/knee issues from youth sports injuries. When my ankle starts hurting all day I swap the soles, or replace the boots and the pain goes away for another 3-6months. I've gone through 4-5 pairs of these in the last 4 years and never had issues with the outer/upper. just break down the midsoles doing 5-10miles a day 7 days a week. So performance seems good for me given the price. Maybe I could try swapping the undersole out for 2xinsoles after a year but for $150 I just replace them and keep working. I do also wear these boots for climbing work, both pruning and removal. they hold up well to the abrasion and wear of climbing trees and are fine standing on tree spikes too, again I have the steel insole plate which must help with the rigidity there. They are HEAVY though with the steel toe and shank. I'm trying to find some lighter boots for daily wear and keep my current near new Timberlands for days I know we have huge thorns in store.

I am pleasantly surprised about the quality of the Timberlands in this video. I have had this idea that their a name first brand with so-so quality. But it seems like they offer a decent boot for a decent amount of money, and a name for fashionistas as well...

I have a pair of Timberland Pro boots just like in the video and I use a custom insole made by my foot doctor. My boots are super comfortable. I am just a DIY home owner plus I do all my own gardening. Even if I wear them with shorts during hot California summer days they are comfortable.

Great comparsion, thanks!

It’s funny - I enjoy seeing you cut the boots in half but I feel like it’s such a waste when you cut through the laces. “Save the Laces!”

I'mma guess the timberland pro is better. Given I own some timberland pro boondocks I might be biased. And I'm always a little reluctant of big name companies that branch out into boots, but not visa versa. For some reason good boot companies almost always make great clothes when they do.

As a home improvement contractor I do a lot of kneeling and scraping of the toe of the boot getting up and down. I had been a Wolverine buyer for many years but decided to try the Timberline pro's. Seemed to be a very well made, comfortable boot for the money but within a very short time the very thin toe leather had worn through making them unusable in wet weather. Going to Redwings or Thorogoods mock toes next pair of boots!

Man I was waiting on this one.. kinda sad I missed this on the initial drop day.. but better late than never

I remember being a boy in NYC 20 years ago My parents bought me CAT boots that looked just like Timbs I was laughed at and made fun of for half the school year by half the school Again this is NYC were talking about, wearing anything other than Timbs (especially in the early 2000s) was sacrilege Needless to say, today all I wear is Timbs

This is so strange with America, i live in sweden, no constructionsite in the country would allow you on site with a pair of them boots. We have like acidresistant rubbersoles, steeltoe, "step on nail protection", anti slip soles, it's like your stuck in the 70s or something. Who goes to work wearing what we use as autum shoes on a weekend. i understand the concept of like factory worker or something using this in america, but here. whenever u start work where u can't have your day to day shoes. u get like workshoes like i described earlier. For free from your employer. that is suited for the work your going to do. like a new pair each year. This is so strange to me...

My first pair of caterpillar steel-toe boots is 10 years old now and still in good shape. I can highly recommend them and bought a second pair.

Here’s a video idea, pick a trade like electrician r Carpenter r something then find 3 good boots at 3 different price points 👍👍 keep up the good work and love the videos