thanks for watching tim, have fun with that thing!

Thanks for the tips! I will probably try that in another video, no ground balance vs. ground balance vs auto tracking.... all on the same targets.

@@SeekandDetect Also noise cancel and ground balance when you change mode.

It helps to understand directions that come with the metal detector that you are trying to represent.

@@chuckufarly65 just wanted to compare how each mode reacted to the same target.

Don't forget it is a 4 segments notches that is why there is a much number changes in the machine.

Once you get used to it, play with one setting at a time to see how it reacts. Eventually you find something that fits your swing style and the kind of targets your hitting🤙🏽

I agree! and i'll have to try that soon👍

very interesting!

@SeekandDetect damn spell check put single, I fixed it. It comes with a sheet I believe with the unit showing this, but people just key in on the 8Khz. I would send a pic but can't

I wouldn't notch anything out if you can. You'll miss some good stuff if you do!😀

@@SeekandDetect I went coin hunting yesterday and had the best day in a long time! Notched out 20-50 which yes I may have passed up on something but I accomplished what I wanted!

@@WTXMD-jq1qs with those numbers you should get almost everything except nickels and wonky zinc pennies😁

@@SeekandDetect I got plenty of Pennie’s dimes OMG and the QTRS! It was fund to change it up a little bit. I just haven’t gotten down to the silver just yet on the XTP. Over only found a few silvers and 1 gold the gold hit a solid 12 on the VDI.

Yes, i think trying to hit an 8" target with sensitivity down to 15 was asking too much. 90% of the stuff I dig is 0-4" deep were 15 is plenty.👍

seems to be slightly in front of the center but as the target gets deeps its a little tougher to tell.

I've got a vanquish 540, maybe a future depth challenge between them. 540 and Xterra have the same size coils 12" and the 440 has a 10".

@@SeekandDetect I ended up buying Xterra pro at kellyco they were on sale for $220

interesting, i'd love to try one!

Possible EMI, middle of a school yard, but houses roughly 50 yards away. No powerlines all. Maybe soil conditions?

I've been playing around with the X-Terra so much lately I do Factory resets often, so my iron volume is usually at the default. In the past with the 900 I played with zero iron volume and use vibration only for low tones. The vibration is tough to feel with gloves on and I'm pretty sure it reduces battery life (especially heavy iron areas)

@@SeekandDetect The iron volume is in the Hidden Settings on the X-Terra Pro , So that means that's it's on 12 if you have done a Factory Reset And that's why you're not hearing it and I have mine set at 25 and I also have the X-Terra Pro main volume also on 25 and what is your Tone Break Set up on 🤔 ?? And I will eventually be getting the 900 but there's enough Settings on the X-Terra Pro to know what really works for it and the Equinox 900 just has a few more Settings on it that the X-Terra Pro I think it will Compete.....

I tend to leave it on out of habit and laziness. Agreed no so necessary on one fairly clean spot of ground.👍🏼

Nice to find a good buy! I got a great deal on the Xterra.

😀👍🏻

Anche come fare l aliminazio e disturbi la piastra va messa nn parallela al terreno...

Yes I have been doing more testing. I need to try a bigger variety of targets too.

Dont be too discouraged by this video, I just wanted to compare modes and frequencies to each other against one specific target. Watch a couple of my other recently videos to see me use it on actual hunts on a variety of targets in different conditions.

@silversurfer3202 Keep the sensitivity down below 20 Sensitivity and 15 MHz and All Tone's And I have been using Park 1 mostly but the test that I have done I was using Park 2 and the Recovery Speed 3 And I swing pretty fast and it is the best Separation of target's but 1 is the Deepest and almost no separation and I use to have the Simplex + and I couldn't use it At some of my Park and Permissions they have to much EMI and 3 bars showing Sensitivity and then I found out that the Simplex is only using 3 Tone's, High Medium and Low Tone and I can't change it to get a better idea of what the target is going to be and I can with the X-Terra Pro and he has the Ground Tracking on and that eats into the knowledge of the target is and I personally don't use the Ground Tracking feature and I also don't use the Threshold Tone unless I was going to the Gold Mine Areas and also he doesn't mention the tone break that he was using and the hidden features that is in the X-Terra Pro Settings Button, there's more to the X-Terra Pro that ALOT of people don't know anything about and I'm still learning about it and you can't hurt it and he does the factory reset and it has a Single Program reset, but you can't hurt it by just checking and changing it and I have also noticed that the X-Terra Pro is Site Dependent and what May work for one site May not work for another Park, but the X-Terra Pro is a great work in progress and if you have any questions about it just go to my Channel and ask me.... and I will try to help all I can... and I also started with 12 Sensitivity and worked my way up to 18 Sensitivity and I don't go anything else Higher than 20 without any kind of ground Feedback and that's why the Jumpy VDI and also if it's a JUNK Target And the jumpy VDI is telling me that not to dig it up and I hope that I can help you with the X-Terra Pro....

Not sure what is going on with this video. I have a cheap Amazon detector that will knock this detector off the field. Maybe this guy couldn't read the instructions that came with it and went right into making a video.

​@@chuckufarly65And he is Really Running it on Full Sensitivity and Getting every kind of ground Feedback and that's all he is going to be getting with the X-Terra Pro on Full Sensitivity and the X-Terra Pro is a Very Powerful Detector and Full Sensitivity isn't needed to get the targets and I have mine set at 12 Sensitivity and I'm still amazed and getting Targets in the 6-8 inch range and I watched a video today of a guy that was on 2 sensitivity and still getting Targets and there's more hidden features settings that nobody is currently changing on the X-Terra Pro and I guess that means nobody else is reading the instructions....

@@chuckufarly65 you're good! I ignored the instructions and tried out all modes, if i read the manual I would've known not to use beach mode at the park!😂🤣Happy hunting and good luck with your detector, sounds like you've got it dials in!