On the Steele Grinder, Blacksmith Supply says it will fit an 8" contact wheel. www.blacksmithsupply.com/84-Engineering-Alec-Steel-Grinders_c_104.html use code: bear5

Thanks for leaving the overheating part in the video. It helps keep beginners like me from getting discouraged by our mistakes because it shows that even experienced smiths make mistakes and that just because a error was made, it doesn’t mean the project isn’t able to be saved.

Very nice work John, even with the "oops", thanks for leaving those in there. Helps me feel better knowing even masters make mistakes.

My grandfather was a blacksmith. Spent a lot of time growing up in his shop on the farm,so I really appreciate watching videos like this. Would love to have my own little shop to do this sort of craft.

Nice to see the ol’ coal forge up and running during this brisker time of year. I like seeing these mono-steel tomahawk/tool videos, as I’m not a very good welder yet. Another excellent video sir.

Great looking Spike Tomahawk you made John. Thanks to Blacksmith's Supply for sponsoring this video and sending you the Steele 2X48" belt grinder, that's going to be an awesome seller I think. It is such a room saver and so usable in a smaller shop. Really enjoyed watching you fabricate this Spike Tomahawk and saving the project . Thanks for sharing with us, stay safe around there. Fred.

My dad and I have been watching your channel for a while now and its been really nice to bond with him over this. He told me his great grandfather was a blacksmith, and we've been thinking about getting into it and your channel has been a great starting place. Thank you. 😊

Could watch a hundred videos of you making axes john I just can’t get enough I try to do each one myself I’ve done the hammer into blacksmith axe with the cross peen on back and today did 90% of the railroad spike axe done and once that’s done gonna try the one you posted with the 01 tool steel with no weld next will be the wrapped eye as I’m getting pretty confident with my forge welds your a amazing teacher and being part of the new generation of blacksmith appreciate each and every one of these videos, also love your tool making videos,and every other type of videos.. I’m on my second to third time watching most of your videos

I wonder why no blacksmith is using a spokeshave to create the handle. It is very fast and creates lovely shavings instead of all the dust and noise. Very nice Tomahawk though 😊

Greetings from Ireland. I love your videos, you have a great way of explaining things that is easy to follow. Could you perhaps do a video sometime about all the different steel's and their uses and go through their tempering properties such as oil hardening, air hardening ect.

As usual a good video. It is showing the real way the things are happening. Sometimes not as attractive, sometimes with mistakes. All good things require patience, skills and hard work. We can always learn something. Thank you!

Turned out beautiful. Looking forward to that special chisel build. We shared this video on our homemade tools forum last week 😎

That handle size is perfect for adding a leather or other material wrap.😎👍🏻

It sucks that the material got over heated, but it's refreshing to us beginners that it can happen to anyone. Thank you for the transparency and the amazing videos!

I've yet to make a handle from a wood blank. I think I'll add it to the bucket list. Thanks for taking us along 👍.

Love the look John. That is a cool grinder for sure.

Very pretty. I'm a woodworker but I enjoy watching blacksmithing. that is a good looking belt grinder. I think it would do as well in a wood shop. It's a bit pricey at $1685 though. Thank you for sharing. Have a great day and stay safe.🙂🙂

84 Engineering do some great grinders. One of these days, I might actually be able to afford one.

What a great little project/piece John! Thanks for sharing!

Wonderful for kindling next to a little woodstove, great work love your transparency 👍

You’re a little bit good at this! Would love to see some collabs with British and German smiths. Obv very hard to realise, but you’re really good!

This is generally known as a boarding axe, commonly used back in the tall ship Era used to help sailors board other ships, by using the spike end to dig into the wood.

Very nice video! Thanks also for showing the grinder, it seems handy. 👍

Love your videos ! I have learned alot from you ! Keep making more videos please !

Love the tomahawk! Great work as always. Really like the remote start dust collector too! That sounds like a good video subject too!😁👍

Mate, that is one sweet little axe. Nice job.

That’s a handsome little tomahawk! The return of the Steele belt grinders is timed just right to give me buyers remorse on pulling the trigger on the Grizzly 2x42. Especially because the Grizzly was DOA, and I’m still waiting on the replacement. Sure, the Steele is 4x more expensive, but it has *way* nicer features, and the build is clearly beefier. Wishing I’d saved up and got that, I just didn’t know they were still making them!

It's good to see some quality hand work where just about every other video out there makes it seem like you can't do good work without a giant power hammer

Very nice work. Thí looks beautiful 😍😍

I enjoy watching you work. Thanks for sharing

You could also use a curved platen in leu of a larger diameter contact wheel. Thank you for sharing!

Great project and video, good advice in the video, I really like the part where you had the overheat accident and showed how to take care of the problem. I've seen people that would have trashed the whole project and started over but you showed that even when a person makes a mistake they can repair it, modify the project and still have a good tool or wall hanger either one. I also really liked the way you showed how to shape the head at the handle and the advice about using the vise. Thanks for all your hard work and the information you put into your videos.

This would be very nice to be enlarged slightly for actual use on a battle belt. Excellent work once again brother! Happy resurrection day! God bless~

I like that grinder I have a propeller repair shop here in Alaska and beat on props with pitch blocks and then weld up damages areas and grind down. That belt grinder looks perfect for doing the hard to reach weird design areas on props. Please send me the one they sent you asap!!

Great video and sweat hawk, John. I love this voiceover style video, the crisp sound quality of your voice makes it easy to listen to and follow along. I look forward to more axe builds from you. And congrats on the mini Alec Steele grinder. When I was shoping for one, that little 2X48" caught my eye because of how affordable it is. I ended up going with the full-size 2X72" Steele ginder and have been very happy with it, especially after I wired my shop for 220 to get full power out of the motor and built a custom bench and tilting stand for it. The big one comes with a third, 5" contact wheel on the flat platen. Either way, you are getting a solidly built grinder with a lot of functionality for a great price compared to other grinders out there.

It really looks good. Glad you left the oops in the video, still shows good smith's make mistakes. I think the handle fits this better after the oops, the handle looks like ut would have been alittle small if all the mass was still in the piece

Looks great. I have yet to make one but. Coming soon. Now i have the how too video

I picked up an old 2x48 a couple years ago, and love it. Hands down, it's proven to be the go-to grinder for the shop and my 2x72 can only look on forlornly. I probably do 50/50 wood and iron work with it. You can't have too many belt grinders in the smithy. One trick I developed over the years to save a whole slew of time on the handles of tools is to take them down to 120-grit.... and then run them through the wire wheel on the bench grinder. There is simply no better finish, imo, and how it feels in the hand is something you just have to try for yourself. Even on store-bought tool handles, the wire wheel makes quick work of getting rid of that nasty plastic finish they put on them, and leaves you with a texture that's second to none. Add two coats of pine tar thinned down with turpentine, and you've got a tool that looks good and feels fantastic!

John, appreciate you mentioning how long you had been forging when you cleaned out the forge clinker. As a beginner it helps set realistic time lines for the work I do. And as always, thank you for the educational videos keep them coming.

Love the videos. Always enjoy getting notifications when you upload

I've just made my first proper steel order and have some stock coming that's perfect for a project like this! No more being beholden to box store dross steel and the pitted scrap that's buried around the smallholding

I've found that a hardwood block shaped to hold the hatchet head, or workpiece in general, with neodymium magnets mounted flush with epoxy to hold them in place works really well. Of course it's not practical for a one off, but if you find a style you want to repeat... A thin leather cover glued to the block to finish it off adds traction and protects the surface while you work.

Great looking tomahawk.

Happy Easter!

Looks great , thanks for sharing . I need a better grinder and my shop is small so I will have to look into this one

Nice Tomahawk 👍

Excellent

World’s biggest clinker 12:12

Nice hatchet , might wrap the handle with leather.

That is about the size of the pocket ax of that era. Don't know if they had spikes but from all accounts they were handy. Nice work.

Great job. Thank you

That axe model is called "Fire mans axe" here in Norway😊

Great job, and nice tomahawk

Great video! I've got the 84 engineering surface grinder attachment and its a game changer

Nice one John!!

I run a 8" contact wheel on my Steele 2x48. its definitely worth getting.

Great teaching!!

Thanks!

Very nice

I delayed it for many years. But... Finally, I have the time now to get a forge up. Anyone have recommendations for a "budget" coal forge set up? The propane budget video is great and probably what I will first start working at home. But my heart lies with old school forging.

Bravo 👏

Great video.

Absolutely beautiful project! And if the handle feels a little small, might be a great time to try a leather wrap around that portion, although it looks great as-is!

As always great content!

Very nice tomahawk!

Great looking tomahawk, if the handle is a little small a tight leather wrap will fix that

Linda peça!❤❤❤❤❤

really nice

Very nice axe, glad you are still at it, up date on the cabin would be nice.

Great video. I wonder if you could use a 12” contact wheel, just running it on a longer arm, and using 2x72 belts. It should work, provided the tool arm doesn’t get any vibrations/harmonics. I bought a Vevor (Chinese) 2x82 ( good luck getting those belts, but 5 minutes measuring and one with the grinder had the extra arm length cut off to run 2x72s). It runs great, and I still can’t figure why other brands are 3-5 times the price. The biggest issue was the unsealed electronic control box (the motor is sealed). I just drilled a few holes in a click-lock food container, stuck the controller in it, and sealed it up with copious amounts of hot-glue. Worked a treat. Cheers from Tassie.

There are 10.000 ways to make a handle .I dont use steel wedges to secure wooden ones or the glue i like to use a small flat head wood screw -i drill a hole for the root of the screw just on a split line between wood wedge and a handle -screw in the screw and it will never come out.Its the same techniqe that is used in securing shaft and pulley on machines.Or when you want to stop something from rotating .Works great. Also i soak the wood in linseed oil and apply it once a year.Its great for wood and it keeps the wood from swelling in moisture or drying during summer. If you dont have the scraper(i know they are cheap but maybe amazon asks 2x the price of scraper for shipping and customs alone)you can use japanese body kit spatulas that you can get in most hardware stores for dirt cheap -you dont even have to sharpen them and they are made out of high carbon steel.Plus you can use angle grinder or a file and make any profile you want .

I'm leaving this comment to enhance your UKposts algorithms. Hope it helps.

Do you think thread cutting oil would work for quenching? I have like 5 gallons of it already in a metal bucket. It's Ridgid threat cutting oil

Nice

Good tempo to the video

John, love watching your videos. I have learned so much from your easy teaching style. May I ask what the radius on your top fuller used in this video is? Thank you for sharing your wealth of knowledge!

Great video John! Hey, I assume that the transparent brownish stuff I saw in a couple views is a protective plastic dip? Who makes it and where can I get some? Happy Easter!

A simple swinging treadle hammer would be a great addition for the primitive workshop.

Happt Easter

Awesome work as always! I was curious though as to what you put on the blade edge around the 18:00 mark while you were making the handle 🤔

Great vid are there any tricks when working with thick metal in the coal forge

Hello sir Switzer. Just wanted to thank you a lot for your great work. I was wondering if letting the punch/chisel was removing the tempered of the tool's steel? Isn't it softened after using it like this? Or is that ok and don t need to re-tempered it after use? Anyway, excuse my poor english, i'm a french aspiring blacksmith, so it's quite difficult to me to express correctly what i've got in mind. Thanks again, u can't imagine how much you help me. Best regards.

Do you have a video on making punches and drifts? I’m really looking to see what the shape and profile looks like so I can try to re-create it.

#BlackBearForge Where do you get the steel you use?

I was hoping. Somebody asked in the comment section.But what did you protect the sharp edge withanks again

Hello from Maine

What did you use to coat the tomahawk blade while you were working on the handle? It looked almost like some sort of resin. And how is it removed for the finished piece?

Hey John I’ve got a question with wood frame in your shop how do you keep your belt grinder from putting hot sparks on your wood or is a problem at all

Hi John, would the file work cause stress fractures at all? It looks awesome.

Suppose you can make a peace pipe?

Just wondering would used motor oil be good for Harding ???

Great video. Would oak be ok for a handle?

What's wrong with using used motor oil? It does works just fine for me.

Hey John, what's the stuff you put on the blade to prevent cutting yourself?

Is that hot glue on the edge while you were working on the handle?

I am a starting blacksmith and one of the biggest things I’m struggling with is getting steel, so what are some places that you would know that which ship high carbon steel? Happy Easter

Is this a different anvil than usual? Filmed earlier or something?

Do you need to quench the drifts?

Fantastic work sir! It's so refreshing to see a forging video with a real blacksmith actually FORGING and shaping the metal, and with a hammer no less. 95% of these kinds of videos that I've seen are just some A-hole using a powerhammer to make a flat bar of steel and cutting out the shape of a knive, or whatever. You are a true craftsmans!

👍✌️⚒️