Boost PCB Durability with Conformal Coatings

Рік тому

Explore the basics of conformal coating with Mark Harris. Conformal coating is a protective layer applied to electronic circuits to guard against environmental factors such as moisture and dust. The article will examine the different types of conformal coatings, including acrylic, silicone, and urethane-based options, and their unique properties and advantages. It will also provide information on how to specify where conformal coating should be applied on your PCB designs, making it a valuable resource for anyone looking to protect their electronics.
👉 15 Days Free Altium Designer Access: www.altium.com/promotions/alt...
Don't forget to follow us on social to stay up-to-date on the latest Altium Academy content.
👉 Follow Altium on Twitter: / altium
👉 Follow Altium on Linkedin: / altium
👉 Follow Altium on Facebook: / altiumofficial
👉 Ready to try the industry's best-in-class design experience yourself? Download it today and get started! www.altium.com/downloads?utm_...
The Altium Academy is an online experience created to bring modern education to PCB Designers and Engineers all across the world. Here you can access a vast library of free training and educational content covering everything from basic design to advanced principles and step-by-step walkthroughs. Join industry legends as they share their career knowledge, review real-life design projects, or learn how to leverage one of Altium's leading design tools. No matter your level of experience, the Altium Academy can help you become a better Designer and Engineer!
About Altium LLC
Altium LLC (ASX:ALU), a global software company based in San Diego, California, is accelerating the pace of innovation through electronics. From individual inventors to multinational corporations, more PCB designers and engineers choose Altium software to design and realize electronics-based products.
#Altium #PCBdesign #Electronics

КОМЕНТАРІ: 48

@ryanjofre 2 місяці тому

Silicone Modified Conformal coating is the Gold standard for the RC Hobby and a godsend to prevent frying an expensive electronic speed control when one drives through a puddle or for those whom love to drive on snow! Obviously, it’s not intended to turn your RC vehicles into a submarine but proper application can tolerate brief submersions! Godspeed🇺🇸🇺🇸🇺🇸

@KapilSharma-co6tu Рік тому

Good intro to conformal coatings, but it would have been nice to see a comparison of different coatings under various environmental conditions.

@trepidati0n533 Рік тому

Good video. Your voice pace was good for people where English is not a first language. For native English speakers, just speed up playback speed (1.25) and it is great.

@aykutalp3127 Рік тому

Thanks for the video! I've always been intimidated by conformal coatings, but this was very informative.

@LucasFernandesAndrade 11 місяців тому

Great video as always!

@ranisani7205 Рік тому

I never knew there were so many factors to consider when choosing a conformal coating. Thanks for the insights!

@benjaminbawkon8040 Рік тому

And really, he barely scratched the surface. Coatings are much more complicated design decisions than they would seem.

@odetteanoh1831 7 місяців тому

I want learn more but i think that :you are the solution 🎉

@goktugcnar5417 Рік тому

Great video! What are the most common mistakes you see people make when applying conformal coatings?

@manishadavi2350 Рік тому

It's interesting to hear your thoughts, but I have had success using urethane-based coatings even in small batch sizes. It's all about technique and equipment.

@ranitamaya2632 Рік тому

Decent video, but I wish you would have gone into more depth about the curing process for different conformal coatings.

@ramazankral1063 Рік тому

I think it's essential to highlight that not all conformal coatings are created equal. A high-quality coating can make all the difference in performance.

@benjaminbawkon8040 Рік тому

Absolutely. And, in fact, the MG Chemicals coating shown in this video is a particularly poor performer.

@inductivethinking Рік тому

In my experience, conformal coatings are only ok for mild conditions. We make weather stations and have tried various acrylic, urethane and silicone coatings, silicone dipping compounds as well as plastidip. The only thing that works properly without much hassle is potting the PCBs entirely in a hard PU resin. They are also typically better thermal conductors than air.

@benjaminbawkon8040 Рік тому

Paralene would do wonderfully in your application.

@nemisharma1053 Рік тому

The video was helpful, but I've found some of the information to be a bit oversimplified. It's more complex in real-world applications.

@aliaadmani2217 Рік тому

Mark, could you explain the differences between conformal coatings and potting compounds?

@pentusinghaniya3453 Рік тому

Do you have any tips for small businesses that want to start using conformal coatings on their PCBs?

@jotijhoda9053 Рік тому

I appreciate the effort, but I think you missed a few key points about the importance of surface preparation before applying conformal coatings. It's interesting to hear your thoughts, but I have had success using urethane-based coatings even in small batch sizes. It's all about technique and equipment.

@medinebldcswt9249 Рік тому

How do you determine the cost-effectiveness of using conformal coatings in a production environment?

@Hyunjin_world.20 Рік тому

Not a bad video, but I think you should have mentioned more about the challenges when conformal coating is applied too thickly or unevenly.

@rutwijmulye6381 Рік тому

Would this coating affect impedance controlled traces❓

@mukashkurasi3399 Рік тому

How would you go about removing a conformal coating if it needs to be reworked?

@raulmmmdli-ck1mj Рік тому

What are your thoughts on nano-coatings as a potential alternative to traditional conformal coatings?

@benjaminbawkon8040 Рік тому

While not officially a Nano-Coating, see 3M Novec for reference.

@kadirduran3055 Рік тому

As an experienced engineer, I feel like this video barely scratched the surface. There's so much more to consider when choosing the right conformal coating.

@mehmethanifsats132 Рік тому

Can you explain more about the thermal expansion coefficients and how they can impact component longevity?

@benjaminbawkon8040 Рік тому

I'll jump in and answer this. Some types of conformal coating are surprisingly "hard". Once applied, they bond to the PCB and to the components. As the different materials expand and contract according to their CTE, the coating both imparts stress on the components and solder joints, and prevents the joints from flexing as they normally would. The primary failure mode due to CTE mismatch of coated boards is in the solder joints. Silicone and synthetic rubber coatings are soft enough to mostly eliminate these concerns, which is why both are popular for boards that will experience a wide temperature range. For consumer grade boards that will only see a limited range of operating temperatures, these concerns aren't terribly relevant though.

@boranakn3116 Рік тому

Can you provide a comparison between brush application and aerosol-can application of conformal coatings?

@pamelabraman7217 3 місяці тому

Brush coating is generally used for one-offs or repair re-coat. Control of coat thickness is difficult. Spray application is industry standard.

@alcicekbaran4 Рік тому

Can you talk more about the pros and cons of using a robotic system to apply conformal coatings?

@benjaminbawkon8040 Рік тому

Pros: fast, consistent and repeatable, less masking required. Cons: expensive, cleaning can be a real PITA, and only conducive to large quantity production. Robotic application isn't even remotely cost effective for small quantity runs.

@lokeshjaat3518 Рік тому

Can you provide any advice on how to choose the right thickness for a conformal coating?

@benjaminbawkon8040 Рік тому

Going to be 100% dependent on the particular coating chosen. Most manufactures provide a best practice thickness for their coatings, and from experience I can tell you their suggestions are typically very good.

@kamalkana8518 Рік тому

Do you have any suggestions for a good, affordable conformal coating for a hobbyist project?

@benjaminbawkon8040 Рік тому

HumiSeal 1B31 is a great performer as long as your temperature range isn't extreme.

@rohitkana5402 Рік тому

Can you recommend any particular brand of conformal coating that you've had a good experience with?

@benjaminbawkon8040 Рік тому

HumiSeal products preform well across the board. They're an excellent "Jack of all trades" coating manufacturer. Our "Stock" coatings are HumiSeal 1B31 Acrylic and 1C49LV Silicone.

@tejvidoshi4079 Рік тому

What is solution for carogan PCB

@Smes53 Рік тому

How important is it to use a certified conformal coating for non-critical applications?

@benjaminbawkon8040 Рік тому

Probably not very important at all. It's almost impossible to find a coating that isn't certified to some standard though, so it's not a big concern anyway.

@huseyiniri4123 Рік тому

Is it possible to apply conformal coating to only specific components, rather than the entire board?

@benjaminbawkon8040 Рік тому

With a higher viscosity coating, absolutely.

@rajkumarichodari111 Рік тому

I've been using conformal coatings for years, and I still think epoxy has its place in certain applications. Don't write it off completely.

@benjaminbawkon8040 Рік тому

Having performed extensive testing on many brands of conformal coating (MG Chem, Humiseal, Miller-Stephenson, DowSil, etc), I can tell you that MG Chem products almost universally performed horribly. Their silicone coating, in particular, was truly awful. It's not a pure silicone, but is really a "silicone modified acrylic" - all of the downsides of both chemistries with none of the benefits of actual silicone.

@7006608 Рік тому

Which one you find to be best among the brands you have tested so far?

@benjaminbawkon8040 Рік тому

@@7006608 Depends too much on what type and what specifications you're most interested in to make a general answer. HumiSeal products all performed well across the board, and had the added benefit of being generally easy to source. Acrylic 1B31 and Silicone 1C49LV became our "go to" coatings of that type. We also stock Miller-Stephenson Silicone. 3M Novec is an incredibly good performer, but it's cost will make your eyes bleed. We do use it though when we have a need for very, very thin coating for whatever reason.

@lazerathhome 9 місяців тому

Why do you keep slowing down your speech mid word. It's Annoying as Heck. ARE you trying to make this for people with learning disabilities? If not, then STOP its annoying, distracting and just plain sounds messed up.