Build a Stun Gun at Home!? | DIY with a Charger Adapter!
Переглядів 412,665
День томуBuild a Stun Gun at Home!? | DIY with a Charger Adapter!
In this video, we teach how to make a stun gun that is made using a mobile charger adapter. In the construction of this shocker, a high pressure converter module has been used, and we have also used a 14500 lithium ion battery to power it. We have used a cream pump plastic container for the body of this stun gun. Using this tutorial, you can easily make an electric stun gun at home. I hope you enjoyed making it .
_______________________________________________________________
About this video:
Charger Adapter
electric shock
High Voltage
Voltage Transformer
_______________________________________________________________
Main Parts:
Charger Adapter :www.aliexpress.us/item/325680...
100ml Cream Pump Plastic Container :www.aliexpress.us/item/100500...
400KV-1000KV High Voltage Generator Module :www.aliexpress.us/item/100500...
Rectangle Rocker Switch SPDT 6A :nl.aliexpress.com/item/100500...
tact switch :www.alibaba.com/product-detai...
lithium battery charger module :nl.aliexpress.com/item/324675...
Sony / Murata US14500VR2B 680mAh - 2A :eu.nkon.nl/sony-us14500vr2.html
410 rubber wheels robot tires :nl.aliexpress.com/item/100500...
_______________________________________________________________
Song: Alex Skrindo - Jumbo [NCS Release]Music provided by NoCopyrightSoundsFree Download/Stream: ncs.io/jumboWatch: • Alex Skrindo - Jumbo |...
_______________________________________________________________
00:00 Introduction
00:31 Preparing the charger adapter
01:25 Preparing the cream pump plastic container
03:18 Introduction and installation of high voltage generator module
04:22 Drilling and sanding the adapter and pump frame
06:04 Introduction and installation of switches
07:35 Installing the charging module
08:28 Lithium battery installation
08:58 Connecting high voltage generator module to adapter
10:21 Final gluing and finishing the work
12:49 Inserting the shock gun bottom frame
13:32 Performance test
14:20 Charge test
_______________________________________________________________
#stungun #highvoltage #plasma #tinyprojects #diy #homemade
@KT11570 5 місяців тому
Very talented i actually looked at my charging adapter and thought of this then tapped this video
@tinyprojects 5 місяців тому
thanks
@keithtaylor6259 4 місяці тому
The problem is that you have to get so close to an attacker that they can ether stab you with a knife or knock it out of your hand and if they touch you while you go to stun them you will stun yourself as well😂
@tinyprojects 4 місяці тому
😀🙏
@blackrabbit9601 4 місяці тому
@@tinyprojectsbetter than nothing😂
@Wanqer 3 місяці тому
U sound like u never fought😂
@user-xi5hk6vg6s 2 місяці тому
you're just jealous you dont have talent like him😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
@AndrewNoman-fu9dx 2 місяці тому
11@@tinyprojects
@trex8656 4 місяці тому
I hope you respond to this… How did you learn to create this? What steps did you take to reach this level of understanding? Thank you
@tinyprojects 4 місяці тому
Learning in the field you are interested in and then being creative and starting to build from small things to achieve greater success.
@JuanmaBedeli 2 місяці тому
i like your talent
@tinyprojects 2 місяці тому
thanks🙏
@maximojorquera5520 2 місяці тому
What are the tools you use to make the holes and open the magazine called?
@tinyprojects 2 місяці тому
You can use any type of grinder or cutter for this
@JuanmaBedeli 2 місяці тому
very good
@user-in8bz3kd7d 6 місяців тому
I heard that the one used by the police reaches 200,000 kv. When I saw you doing this, I wanted to play EMP again.
@tinyprojects 6 місяців тому
thanks for your coment
@user-in8bz3kd7d 6 місяців тому
@@tinyprojects Teacher, have you ever used a jammer that blocks 2.4g, 5.8g and GPS signals?
@tinyprojects 6 місяців тому
No, but with a simple search on UKposts, you can find useful results in this field
@Extranjerakata 11 днів тому
Una pregunta tienes él diagrama que no se entiende bien. Y de donde sacas los circuitos? Donde los compras y que modelos son?
@tinyprojects 10 днів тому
The circuit used is very simple and it is started only by feeding the high voltage module and you can find similar items with a simple search. To buy high voltage module and battery charger module, you can buy from reliable sites like Amazon.
@kamalimohammadlrangolestan1189 3 місяці тому
Hello برای نصب و لحیم سیمها به درون کاور شارژر، سیم رو به سیخ چوبی کباب بچسبون.
@matandoeltiempodetectando2314 5 днів тому
For it to work correctly, the circuit must be connected in parallel to the battery. Not at the output of the charger module. The module only gives 1A and saturates and disconnects. I speak from my own experience. Greetings.
@tinyprojects 4 дні тому
In terms of the amount of current, your opinion is correct. When we connect the battery directly to the module, more current will be given to the module. But in this case, the battery will no longer be protected against excessive discharge.
@Im_Smudgy 3 місяці тому
I only searched this up because I wanna make a real-life Shocker costume
@tinyprojects 3 місяці тому
its great , thanks
@user-ic9lu3lq6q Місяць тому
Brother what if I use Power Bank Module T6845-C (5V Step-Up Power Module ) instead of Tp 4056?🤔
@tinyprojects Місяць тому
The t6845 module outputs about 1 ampere, but the current consumption of the high voltage module is more than 1 ampere and it may not be able to supply this current.
@gamingmaster9378 Місяць тому
Where i get a lithium battery charger module?
@tinyprojects Місяць тому
You can buy it from Amazon or Ali Express or any other online store
@boussettahamido 4 місяці тому
billahi akil 9at3 lka7la rafi3et ljohd mnin jibtha 3andi barcha lawej 3liha
@RanenVoinik Місяць тому
Super 😊
@tinyprojects Місяць тому
Thank you! Cheers!
@ashwinimagaji5138 29 днів тому
Yaa correct
@RikatSuu_Id 4 місяці тому
I like your video i subcribe you emm..... Im fom indonesia aku menyukai vidio mu
@tinyprojects 4 місяці тому
thanks🙏
@jakobleijnegard4621 4 місяці тому
i have a charger adapter on my desk and i wanted to see if someone had made a tazer out of it and here it is
@saijalix-b9871 Місяць тому
Can it stun an attacker
@tinyprojects Місяць тому
No, but if the number of its modules increases, it can
@user-hj3bx3qf2u 2 місяці тому
Please where can I get the 1000kv generator
@whecker3389 2 місяці тому
Amazon
@bradwelds8763 9 днів тому
My guy using the stone polishing bit for a plastic bottle
@tinyprojects 9 днів тому
It's okay . Creativity in DIY works is good
@vanillagorrilla 2 місяці тому
This looks highly dangerous I’m going to try it
@tinyprojects Місяць тому
No, it does not pose a danger to human life, but you must follow safety precautions
@kamalimohammadlrangolestan1189 3 місяці тому
Hello. بشدت ناشی گری و بد صلیقه
@mohamadabu5141 Місяць тому
How to makee a jammer?
@tinyprojects Місяць тому
Its circuit is similar to this one, but some details are different. If you search, you can find its circuit
@kamalimohammadlrangolestan1189 3 місяці тому
و برای ته بطری ماژول شوکر، کافی بود ، از وسط برش میزدی ، تهش غار حرا نمیشد.
@ashwinimagaji5138 29 днів тому
U can use even mobile adapter
@tinyprojects 28 днів тому
yes
@gallimimus_7277 2 місяці тому
è abbastanza potente per scioccare o non si sente
@tinyprojects 2 місяці тому
yes it can
@AnthonyHighVoltage-hl8fq 3 місяці тому
nice about 20KV at max good little thing to use the attacker wont know what your gonna do with that they will probably laugh there ass off and be like bro what the heck are you do with that then they get electrocuted ZZZZZZZZZZZZAPPPPPPP OWCH sorry for the dumb comment lol
@tinyprojects 3 місяці тому
Yes, this can also be a scenario. Thankful
@theRhinsRanger 2 місяці тому
Thats not a stun gun, its a 'done gun'
@HichamChahbon-dl4qz 5 місяців тому
😊✌️✌️🙏👏👏👏
@tinyprojects 5 місяців тому
🙏😊
@mmbmalumfashitv4238 2 місяці тому
Done
@tinyprojects 2 місяці тому
🙏
@nicolasparadis1407 3 місяці тому
Pfff, those cheap HVG burn too easily, try doing a real one if you don't wanna get in trouble with a taser that doesn't work when you need it!
@tinyprojects 3 місяці тому
Cheap and fake types burn quickly, but there are also original and high-quality types that work well.
@user-gw2oh7yi7q 2 місяці тому
2
@mYuSERnAME11100 2 дні тому
soldering on a LiOn battery..no thanks
@tinyprojects День тому
It is a little hard, but it is easy to solder with soldering oil
@maxmixer 2 місяці тому
Load of crap and that magic knife and drill crap, show people you doing the job right 😅
@ziopesce4267 2 місяці тому
can it kill a person?
@tinyprojects 2 місяці тому
no it only shocks
@homayounfaghir5374 2 місяці тому
خیلی وفت بیخود وسط کاردستی با نشان دادن صحنه های اضافی و غیر لزوم گرفته میشه کمی حرفه ای تر عمل کنیم تا عملا قصد طولانی کردن عمدی کلیپ القا نشه
@tinyprojects 2 місяці тому
It will be checked
@Seek.Improvements 4 місяці тому
Great video my guy…. you just earned your self a new sub🫶
@tinyprojects 4 місяці тому
🙏
@stebotaylor8236 2 місяці тому
In order to bend the tips of the plug you would have simply had to heat them up a little, then bend them and hold them, they would stay that way and to solder something on a battery you would have to use more flux. It probably took a while and was very annoying, right😅😉🫨
@tinyprojects 2 місяці тому
Thank you for your attention and guidance. Yes, soldering the battery is a little more time-consuming than spot welding, but it is easier to remove and replace the battery.
Easy Ideas Tech
Переглядів 2 млн
Tips Workshop
Переглядів 4,2 млн