Building a Large Wooden Gate for the Barnyard
Переглядів 225,495
5 років томуWe are building a Large wooden gate to install in our barnyard fencing. The gate is seven and a half feet long and the interior is filled with a stock panel. This makes it prefect for small livestock. We just used treated deck boards to build the gate out of, and it is easy to build. We also used 2" & 2.5" deck screws, 1" fencing staples, and a 3" long bolt to connect the braces together.
/ countryviewacreshomestead
@bharris5388 4 роки тому
Hey man, thanks for taking the time to share this. I watched your video twice then made 2 of the exact same thing myself. Saved me tons of money on gates I needed and was super simple. You rock, subscribing to your channel.
@justesaint-louis864 17 днів тому
Very nice gate. Very inpirational.
@HickorycroftFarm 3 роки тому
We are going to give this a try for our sheep gates since we have a few cattle panels that have bent ends etc. Thank you for the ideas!
@EC4400 5 років тому
What a nice job. Check one more off of the to do list. May you have many happy years opening and closing your gate.
@JamieMeyer1111 4 роки тому
This is good stuff. I used this as the basis for the gate going in to my farm garden. It turned out very well! Thanks for posting this.
@ypsrudy1 9 місяців тому
Genius build. Just what I was looking for my garden gate. Thank you
@CountryViewAcres 9 місяців тому
The gates are very heavy. You will need a very strong post to mount it on.
@prayerangel1 4 роки тому
Thank you for posting this vid! Copied your design and it's the best~ and best looking~ gate I've constructed thus far. Will utilize this same design for all gates from here on...they look sharp and are strong.
@Tomhohenadel 5 років тому
Good looking gate, hope the tractor fits through. Can’t wait to see how you fix up the interior of the barn
@hendrikventer8741 4 роки тому
Thanks for the video showing the different steps. I used your design also with decking wood (pine) and black wire mesh to build 2 gates to keep dogs in - works a treat and looks good too.
@stevemartinez6757 5 років тому
Great work! Your place is coming together nicely.
@MistressOnyaCox 7 місяців тому
my favorite gate video EVER
@TheGinger062964 4 роки тому
I've always dreamed of living on a farm. Your place is beautiful!
@herzargoloz4986 Рік тому
It’s a beautiful gate man! Thanks for sharing, I needed an idea and yours is perfect.
@jameswoods5709 4 роки тому
The tractor shouldn’t be a problem getting to & from the the barn yard. Thanks for showing. It gives me some idea on how to build my gate in my barn yard!
@salmonhunter7414 5 років тому
Looks almost to nice for a barn yard. Thanks for sharing.
@110americalovingpatriot2 Рік тому
Looks super nice, and sturdy👍🏻
@albundy1956 5 років тому
U should put the topp hinges upsidedown, so Ur animals can´t lift it up and lose it. Great job. *thumbs up*
@augustreil 5 років тому
Gate looks Great !
@judithbrown7319 5 років тому
Love those gates!!!
@fiskfarm 4 місяці тому
Nice and simple. Just the way I like it. I'll be using Tulip Poplar off our sawmill. I'm told that all the old timers here in NE TN used it for gates. 💪😎👌
@fancybrooks3156 5 років тому
I have to give it to you, you are dedicated to accomplishing your goals! 👏🍎💯 Great job! Your dog is your faithful companion. Even the cat was there on the end! LOL
@mariaotero5601 4 роки тому
Awesome gate kudo's! Love the dog and cat 💙💙 all around you !!
@sappysuds4545 3 місяці тому
Thanks for sharing. I'm going to use this design!
@aandd10 2 роки тому
Great job i will give this a try because you made seems so simple.... thanks
@Patrick-jx1yo 3 роки тому
Nice gate! I think something like that will work perfectly on my ranch. Thanks for posting! 👍🏼
@CountryViewAcres 3 роки тому
FYI. They are heavy gates, they need a good strong brace to mount on. 3 times heavier than a metal gate.
@Patrick-jx1yo 3 роки тому
@@CountryViewAcres Thanks so much for the tip!
@pilarcabrera2990 Рік тому
Todo un profesional! 👍👍👍👍 Y un trabajo bien hecho!
@DrewJacobson61 Рік тому
Good video! I like how you work!
@markharrison6656 4 роки тому
Awesome gate. Gotta do this.
@kdb_2024 11 місяців тому
Well done! Thanks for idea. 💯
@robertharcourt7650 5 років тому
Great job on the gate ;)
@terryduprie6313 3 роки тому
Nice; I will use that design on my fence. Thank you.
@patrickbear7261 5 років тому
AWESOME job.👍👍
@batpherlangkharkrang7976 3 роки тому
Hi..... Thank you for sharing your video homestead 👋 bye 👋 bye 👋 bye 👋 🎥👍👍👍
@kfourom 4 роки тому
Gates on our old place were built the same as yours, except for no wire. One other difference was that the hinge side pole was about 5' higher than the top of the gate such that a support (guy) wire could be added to insure that the far end of the gate did not sag. Our gates were at least 12' wide.
@fernandobrown7386 5 років тому
Another awesome project done look pretty simple to do thanks for the idea to can't wait to see your barnyard fill with animals running around
@CountryViewAcres 5 років тому
Yea, my wife can't wait either. She has starting contacting people inquiring on some goats.
@fernandobrown7386 5 років тому
That awesome y'all getting goats I hope she enjoys them
@Sqeptick 5 років тому
Turned out great
@131dyana 4 роки тому
Nice big gate. It really looks like it will last awhile too.
@chopshop6446 5 років тому
Looks good
@frankiesfamilyfarm7 Рік тому
Great video/instruction.
@marcie4771 4 роки тому
Wow such good ideas--
@Ali-ow7lb 2 роки тому
Loved the video! I’m wanting to use these as sheep panels in my barn to keep the sheep out of the hay area. Will they be fine just sitting on the ground if I connect a few together?
@williamblakeley3744 4 роки тому
Good.job.on that.gate 👍
@richardzimmerman1216 3 роки тому
Perfect!
@lightningfisher8177 2 роки тому
Thanks Brother!
@boblani8150 2 роки тому
Enjoy your videos, Very Helpful. What width are the deck boards that you used. Thanks
@johnj.baranski6553 4 роки тому
Perfect for what I need. Gonna build this exact gate but stand it up lengtht wise for my chicken yard that has 7 feet high posts and wire mesh fencing surrounding it.
@dierenfilmpjes5136 2 роки тому
Fantastic for the money!
@jp3eku 2 роки тому
Good looking gate! But why not buy a Tractor Supply 6 bar gate and attach a hog panel to it? It's heavy duty, light weight and can't rot? I really like your videos though! Thanks for sharing them !
@JohnWillman 2 роки тому
Nothing wrong with a bit of over kill,..what a sweet looking gate,..I bet it is heavy,..
@thelouiebrand 4 роки тому
Gate building starts at 3:43
@bardothodol4472 Рік тому
Thank you....subscribed
@TheJkibs 4 роки тому
Definitely going to need a gate wheel on that to keep it from sagging. I would imagine it’s hitting the ground by now.
@t.curran8243 4 роки тому
Going to do this instead of metal pipe gate. I've got an oddball 15' opening between massive posts. Going to do it with 2 panels.
@Bass2010 5 років тому
Nice gate unless you get an elephant you should be good to go it’s all looking good 👍👍👍👍👍
@kk6aw 3 роки тому
In some settings it keep the gate from being borrowed. My gate hinges are opposed because it is by the road.
@temujinkhan6326 4 роки тому
top hinge besides being upside down can be screwed in more to remove slack
@keithkubicek3394 5 років тому
Looking good! It might just be the way the camera is sitting but the left (unbraced) post looks plumb is the gate level? If it's not you can tighten the top lag screw until its level and put the top hinge back on, if a half turn is what you need another person's idea to pin the top screw pointing down would work and the gate can't be lifted off the hinges.
@CountryViewAcres 5 років тому
the gate is unlevel, because the ground is going downhill. so the gate follows the ground. if I level the gate it would be 8" to 12" higher than the ground on far end.
@TheMsLilLady 4 роки тому
Oh my goodness! your dog in the background. I literally thought it was a bear cub or something until he/she turned her face and I could see more clearly lol
@roseymalino9855 Рік тому
Good solid job. At the risk of being nit-picky, because of movement and its weight, those gate hinges should have been attached with through bolts.
@HamVlogs 3 роки тому
Will thay swing both ways? What type of hinges are these?
@tonygonzales1122 Рік тому
Can you post a link or two for the gate hinges used here? Thank you!
@poormanscowranch3194 4 роки тому
Excellent idea i need ten feet gates but they so simple to make!
@CountryViewAcres 4 роки тому
FYI, these wooden gates will be heavy. So you will need a strong post to hang them on.
@poormanscowranch3194 4 роки тому
@@CountryViewAcres yea i have telephone posts four foot deep! And will have a wheel on gate to support the end!
@davidwatsonii9469 5 років тому
I HAVE THE SAME SQUARE, IT WAS MY DADS, NICE GATE TOO BY THE WAY
@CountryViewAcres 5 років тому
The square was my grandfather's. I have a lot of his tools.
@rickrisch1231 2 роки тому
What’s the hinge hardware you used? I cannot find that anywhere.
@wallyborni4411 3 роки тому
Is it one way or two way gate?
@speedsterwinston 4 роки тому
Just curious what music is in this video?
@tnxdfan1 4 роки тому
Beautiful gate. Can you update us on how it has held up so far? Have the decking boards tried to twist or rack?
@CountryViewAcres 4 роки тому
The gate is still in good shape. It is just heavy, so you need a good strong post to hang it on. It can cause smaller posts to lean.
@cathiwim 4 роки тому
Will the pressure treated wood degrade the sheep panel over time? Oh, and previous posters were correct, your top hingepin needs to be pointing dow to prevent someone or something from lifting it up and taking it off the hinges.
@CountryViewAcres 4 роки тому
Yeah it is so I can lift it off if I want. But the hinges are in a slight bind and it is so heavy I dont think I could lift it off without losing a hinge. It weights 4 times what a 12 foot metal gate weighs. It definitely needs hung on a fence brace or it will pull the post over.
@careybowden4864 11 місяців тому
I'm going to use this design, but ours will be 5'x5' double gates. 😊
@lathamsranchoutdoors2922 4 роки тому
Looks great but would definitely put your top hinge down so the animals can’t push up on it and the gate come off. Great channel.
@CountryViewAcres 4 роки тому
This wooden gate, it probably weighs 4 times a 12 foot metal gate. It is very hard for me to lift it off the hinges.
@rockie13ja 4 роки тому
You should build a rocket mass heater for your shop
@craigrethorn1234 5 років тому
Your top hinge is on upside down . That will keep it from getting nocked off
@jenniferwhite6089 3 роки тому
laugh at that too and have th gate that low too will give him more problems too
@frank64409 Рік тому
What is the name of your squire?
@sth9460 2 роки тому
Has your 8 ft farm gate that you made out of treated 1x6’s warped or cracked any where you screwed it together? I’m wanting to build two 8 footers for my driveway. I value your feedback. Thanks
@CountryViewAcres 2 роки тому
No, the wooden farm gates are still fine. No warping. They are very heavy gates so you need a good post or brace to hang them off of.
@deborahburke534 5 років тому
Very nice gate
@leegodfrey3490 4 роки тому
How about an update. How has it weathered over the last year.. Awesome job
@CountryViewAcres 4 роки тому
The gate us still looking good. It shows up in the video I posted today.
@leegodfrey3490 4 роки тому
@@CountryViewAcres I'll have to check it out
@KurtBelyeu 3 роки тому
Where did you find the gate mounting hardware?
@CountryViewAcres 3 роки тому
"Rural King" - farm store
@coltonriblett7898 4 роки тому
So why do you build this over buying the metal wire filled gates available?
@fergferguson7370 4 роки тому
Might need a wheel on the bottom soon.
@conservativeprodigy2604 5 років тому
Are you planning on beef cattle or dairy?? Any thoughts on pigs?? They are fun to raise
@CountryViewAcres 5 років тому
We are open to ideas. We still haven't decided. But I will admit, cows are probably the most intimidating, because of there size.
@conservativeprodigy2604 5 років тому
Country View Acres the family cow is a beautiful thing to have. You should look into the mini jersey Dairy cow. It has the perfect size and genetics for a beginner family cow.
@CountryViewAcres 5 років тому
My wife is planning on getting dairy goats, so I am thinking about raising other livestock for meat. I will probably get a couple feeder pigs for myself. But am still looking for a type of livestock to raise on pasture and sell.
@conservativeprodigy2604 5 років тому
Country View Acres all great ideas. Me personally from past experiences would prefer a dairy cow before dairy goats. In many areas it’s less work. Good luck to you and your wife! I find your channel very interesting and inspiring!
@saddlelac Рік тому
I guess you don’t get snow since you have little ground clearance…
@mildredwilson5922 3 роки тому
I would center the latch on the gate instead of the top
@CountryViewAcres 3 роки тому
The pin needs to clamp around a horizontal bar on the gate to keep it was twisting. So with a wire filled gate it has to be that high, since there is only one horizontal bar on the gate.
@mildredwilson5922 2 роки тому
@@CountryViewAcres I meant on the wood gate
@CountryViewAcres 2 роки тому
Sorry, I thought this comment was one my recent videos. My bad.
@brianjohnston9822 4 роки тому
Trying to determine country of origin, aw yes moment, American. Type of screws he was using. Canadian = Robinson, and USA, Phillips
@davidleon510 4 роки тому
In California
@bevnelson3678 3 роки тому
Your doing well Even another tick off your list of to dos
@BrianFox 5 років тому
Glue?
@kalahunter1174 4 роки тому
Evan, You really need to change the corrugated Metal on the back of the Barn so the Corrugations run Vertical, It would look a lot better & probably wouldn't have rusted so much because it didn't have drainage. Then you could Paint it & it would look Great.
@romeliapolly9631 3 роки тому
I have done very similar with Woodglut designs.
@christjulipds13 3 роки тому
Do it yourself, go to woodprix and learn how to make it.
@Ojb_1959 3 роки тому
Too heavy and expensive imo. Well made though.
@110americalovingpatriot2 3 місяці тому
Whos we? Don't tell me you still have imaginary friends at your age😜 ok what's her name and was she wearing bib overalls or a bikini when she was helping you? Haha thanks for the video I how you constructed that gate, it should be sturdy as heck👍🏻
@shantaymadison5581 2 роки тому
I started with Stodoys plans.
@hafzamacie8858 2 роки тому
You'll find all the inspiration you need on woodglut instructions.
@jungbechtospk40 Рік тому
In my first work I always used woodglut plans.
Building With Blake
Переглядів 44 тис.
OBOZTV
Переглядів 365 тис.
Серіал К.О.Д.
Переглядів 509 тис.
OBOZTV
Переглядів 365 тис.