Building My First Ever OVERKILL Gaming PC - 4090 i9-14900k ($6000)
Переглядів 69,396
Місяць томуThis took a lot of time, please show some support!
Not sponsored (All Parts Bought Myself)
My first ever high-end OVERKILL PC build $6000+
Specs & Links -
Case: CORSAIR 7000D Airflow Full-Tower ATX - [CAD 299-350]
www.canadacomputers.com/produ...
www.newegg.ca/p/N82E16811139169
GPU: ASUS ROG STRIX RTX 4090 GAMING OC - [CAD 2750]
www.amazon.ca/GeForce-Gaming-...
www.canadacomputers.com/produ...
CPU: Intel i9-14900k - [CAD 800]
www.canadacomputers.com/produ...
www.newegg.ca/intel-core-i9-1...
Motherboard: ASUS ROG Strix Z790-E Gaming WiFi II - [CAD 640]
www.canadacomputers.com/produ...
www.newegg.ca/asus-rog-strix-...
Cooler: CORSAIR iCUE LINK H170i RGB - [CAD 365]
www.canadacomputers.com/produ...
www.newegg.ca/corsair-liquid-... - LCD VERSION
❌RAM❌: CORSAIR Dominator Titanium 32GB (2x16GB) DDR5 6400MHz CL32 - [CAD 235-260]
www.canadacomputers.com/produ...
www.newegg.ca/corsair-32gb/p/...
Power Supply: MSI MEG Ai1300P PCIE 5.0 - [CAD 490]
www.canadacomputers.com/produ...
www.newegg.ca/msi-meg-ai1300p...
SSD: WD Black SN850X 2TB PCIe Gen4 NVMe M.2 - [CAD 230-360]
www.canadacomputers.com/produ...
www.newegg.ca/western-digital...
Fans: CORSAIR iCUE AF140 RGB ELITE 140mm
www.canadacomputers.com/produ...
Social Media -
Instagram: / rishad.mb
Timestamps:
0:12 - Case
0:41 - Motherboard
1:57 - CPU
3:15 - RAM
4:24 - SSD
6:01 - Motherboard Into Case
6:27 - Power Supply
6:42 - Fans
8:26 - Cooler
11:59 - Commander Kit
12:45 - GPU
14:03 - Results
@willn8664 Місяць тому
Well, it's safe to say that you should be set for the next decade.
@SkateClipsAndTips Місяць тому
Unless games demand more
@arkaneforyou Місяць тому
5 years Max I think.
@Airman2324 Місяць тому
How long 4p80 super and 14700k
@Airman2324 Місяць тому
4080 super*
@maxdave9590 Місяць тому
@@Airman23245 to 8 years also, with low settings, you'll be good 👍
@GM-vy1wy Місяць тому
Great video. That was really fun to watch. I like Corsair. They have some really nice stuff. I built my first PC a few weeks ago. I picked the same cpu, gpu, and mobo as you. But I went NZXT with everything else.
@xUltimatex Місяць тому
Thanks. Corsair is great but they're extremely pricey. NZXT is a good choice, cost to performance wise.
@mikysancho512 Місяць тому
how many cost ur pc ? cause i want to do one but it's hard to choose because it cost a lot of money
@GM-vy1wy Місяць тому
@mikysancho512 the total cost of my build was about $4600 USD.
@chrisc4843 26 днів тому
I bought an NZXT kraken Elite 360 AIO and all Corsair fans and planned on swapping all fans for Corsair on the AIO so the RGB worked all in one is that okay to do?
@acey5804 25 днів тому
dream build right here
@mxvexluvsyou4326 23 дні тому
SICK BRO IM ALSO BUILDING MY PC TOMMOW WITH ALL THE NEW PARTS JS LIKE YOURS
@Helios.vfx. 24 дні тому
Cannot wait to get my build done, to learn at night and working in construction at day lol
@Ibrahim-ym3tw Місяць тому
Damn bro that’s sick 🔥🔥🔥🔥🔥🔥🔥🔥🫣😪😳🍑🔥🔥🥳🧢🕉️
@flaviog141 3 дні тому
Not really overkill at all, it is just high end consumer-grade hardware. Next step would be to invest in some proper watercooling parts, not an AIO. If done well it will significantly cut down the amount of fan noise and the hardware will run cooler as a bonus.
@mannatchahal3797 Місяць тому
Wowzers, this really inspired me to go and maybe build my own PC one day too!
@amathystbeam1730 Місяць тому
One day, or day one?
@rebeccamiron1820 26 днів тому
your fastest ssd should be in the slot m2_2 to be linked to the cpu and no to the chipset. Don't put anything in the slot m2_1 because it will cut the pcie lanes from your gpu in half (from 16 to 8). And connect the second 8 pin cpu cable to the motherboard.
@Helios.vfx. 24 дні тому
Even at 8 lines, the graphics won't ever be used way that'd ever be limited by it
@mo0rkszz94 24 дні тому
I JUST FOUND OUT THE THING THAT COMES WITH THE GRAPHICS CARD ALSO DOUBLES DOWN AS A GODDAMN SUPPORT OMG AND IT'S ALSO AN SCREWDRIVER OMG
@michagysin3082 2 дні тому
you also have a tuf card?
@tegveernatt5347 Місяць тому
Wow very nice 👍
@6r3ys0n Місяць тому
A LGA 1700 contact frame from thermalright on Amazon for $8 is a recommended investment :) Prevents warping to the IHS and provides better contact and slightly better temps due to the original LGA 1700 bracket design flaws. With a 14900K I would most certainly take advantage! I use them on all of my raptor lake and raptor lake refresh builds :) AM5 too but the only thing from my experience it does is help keep thermal paste out of the weird divots in the CPU 😂
@xUltimatex Місяць тому
I will definitely check this out. A lot of people have been mentioning the LGA 1700 contact frame being better for the CPU temps.
@Rishi.149 Місяць тому
Amazing 🥰
@Weyco23 Місяць тому
Just finished a similar build, same motherboard, used Corsair memory, h150i cooler, 4080 Super, 14700k, Corsair 1500 PSU, used a WD SSD for storage, but a 990 Pro for the OS. Like yours, it should last awhile. Took me two weekends to assemble mine. I used a Thermal Grizzly contact frame and Kryosheet as well.
@flako_von 9 днів тому
bro what a 1500 psu wtf whyyyy?!??
@Weyco23 9 днів тому
@@flako_von Because I can, and I'll probably never need another one.
@KatieHullah 5 годин тому
@@Weyco23facts
@user-dt8zv6bz6z 11 днів тому
Hi, I am a 12 yr old boy who is building my own pc with a TUF 4070 rtx, AMD ryzen 7 etc And this video inspire me to
@bradyklein1892 Місяць тому
WIth the amount of unoptimized pc games nowadays, it is certainly far from overkill if you intend to game at 4k high refresh.
@LEL7567-ABCDEF 11 днів тому
mom, it's for study
@xUltimatex 11 днів тому
Google classroom at 10,000 fps!
@daddyfrank2010 23 дні тому
love it, would love to know cost of the build. waiting on Benchmark video
@xUltimatex 18 днів тому
I'm trying to determine if I should get a capture card for the benchmark video or simply use the application. It would save performance getting a capture card but 4k60 or 120 costs a nice amount. If I make up my mind, I'll try to get the benchmark video out ASAP.
@xUltimatex 18 днів тому
Total cost of the build I never calculated, but it was 6 thousand something Canadian dollars *before tax.
@Thebossreserve 20 днів тому
Beautiful construction. Guys, I'm also building my first PC, I'm having doubts about which CPU to use, I know that both brands have qualities and defects, but is it safe to go with Intel even though I know that the 14th generation is gone?
@user-bz8sg8yk2g День тому
go with amd, the 7800x 3D is the most powerful
@xulifar4243 5 днів тому
bro got the top everything
@iikatinggangsengii2471 3 дні тому
they need to be 'assemblied' first though, still hasnt done and its been almost 2 years
@iikatinggangsengii2471 3 дні тому
out of the box they were just as bad as your typical budget devices
@bobby_tryhard Місяць тому
U assembled it in yo school ?
@xUltimatex Місяць тому
Yes, I had to for the lighting and equipment plus there was more space to do everything.
@hydraintel9498 25 днів тому
I literally have the same exact v build. Same case and even the motherboard😂
@rival001 Місяць тому
you should place the ssd in the top slot (below the cpu and above the pcie slot) for better performance
@xUltimatex Місяць тому
Yes, thanks for that! After this video I added in my 2nd SSD due to the delayed shipping.
@Weyco23 Місяць тому
Not really, on this board two slots feed from the CPU, the other three from the chipset. If you use the slot below the GPU you are robbing the GPU PCI lanes. I have the same motherboard, I’m using four SSD slots, but not the one that shares with the GPU.
@xUltimatex Місяць тому
@@Weyco23I didn’t read his comment correctly. But you are right, you do cut the gpu lanes by half from x16 to x8. I’ve used the very bottom slot, and the slot in the video.
@Velcrol Місяць тому
@@xUltimatex Guys, I am a bit confused. I am about to build my very first PC (different MOBO, B650E WIFI) and I don't know why it is important which slot I use - I only have 1 SSD
@xUltimatex Місяць тому
@@Velcrol you can open ur motherboard manual and avoid the slot that shares lanes with ur gpu, or u can simply try searching up ur motherboard and what slot to avoid.
@kishoreabraham 10 днів тому
only thing, bend corrector is missing
@dadasahebkhose3336 Місяць тому
Dream.pc...super.hightech.components.used.sir
@hashim_alahmadi Місяць тому
Question for the experts: Is the Corsair iCUE H150i suitable for the i9 14900k?
@charlesherbert3570 Місяць тому
be carefull because even some 360mm aio cant cool this cpu correctly because it is just that hot but if you already bought the cpu i would suggest you buy a contact frame from thermalright to try and make it a little cooler, if you didnt already bought it i would recommend going with an amd cpu that suit you need like a ryzen 9 7950x3D or ryzen 9 7950x if you dont need the 3D V-Cache because they run way cooler and are way less power hungry.
@hashim_alahmadi Місяць тому
@@charlesherbert3570 Thanks 👍
@tailorbrailsford7472 Місяць тому
Nice video but where did you get the money for this computer build
@DONTTRIP-ik3dl Місяць тому
Working. have a job. cut grass or something for money lol
@Helios.vfx. 24 дні тому
@@DONTTRIP-ik3dlexactly.
@SkateClipsAndTips Місяць тому
Make sure to undervolt or limit the wattage on that cpu
@xUltimatex Місяць тому
Left everything as is. Will definitely do so down the line 👍
@SkateClipsAndTips Місяць тому
@@xUltimatex in some games the i9 k variants get up to 80+°c which is not normal for gaming loads. The mobo usually pushes too much voltage/wattage into the cpu for no reason
@xUltimatex Місяць тому
I found this was due to motherboard preset settings which actually disabled intel default settings. Yes, until I turned it off to enforce all limits, I got 80+. I do plan to undervolt soon for benchmarking. @@SkateClipsAndTips
@ewanva Місяць тому
Blar 😮🦀
@user-mn7mx2qf5i Місяць тому
gabinete aquário era o ideal pra essa configuração.😢
@user-cf6yr9lg1c 20 днів тому
your gonna have to reseat the ram your meant to push it down until the clips go into the notches
@kylobews7764 Місяць тому
How did this cost 6? I just built a PC for someone with a 4090 14900ks titanium 1600w seasonic psu, MSI ace max mobo 64gig ram 7 lian li TL LCD fans for less than 6k.
@xUltimatex Місяць тому
Canadian Dollars, All items used have the prices in the description. Corsair would be one of the reasons why in my opinion, and that's 6k not included taxes I had to pay.
@Haz3mns-lil-pookie-bear 15 днів тому
shoulda gotten a dual chambered case
@hairlinefracture5180 Місяць тому
great video!! 😮😮😃😃😍😩
@user-ho9ds8bq2z Місяць тому
You should definitely try ark survival ascended because I saw. Bench mark vid on max settings a 4090 could only get 60 fps
@xUltimatex Місяць тому
I have tried it and I would say the game isn't optimized as well as it should be. With full max settings, yes, got around 50-70fps. I will include in the benchmark video.
@Diszzy2savv 16 днів тому
Would this build be good with 98gb of ram?
@xUltimatex 11 днів тому
You can run a whole companies database. Most definitely.
@ExplosiveTowel88 12 днів тому
Most normal corsair fan
@AliProo1919 День тому
damn pc
@winnik23 19 днів тому
I have the same screwdriver. everything else remains to be collected
@xUltimatex 18 днів тому
That's progress! A screw driver can take you to lots of places.
@Dishrag_vr 18 днів тому
Tip: next time don’t press down on the cpu ,let it fall in it self
@NILIX_YT Місяць тому
Hi you indpired me to build my first pc here are the specs, 3070 ti,ryzen7.ddr4 fury rgb ram.And i dont remeber my cooler but its from NZXT
@xUltimatex Місяць тому
That sounds like a fun first pc build. Make the best of it 👍
@sunny-vega Місяць тому
Thats a lot of cooling paste you used there, no?
@xUltimatex Місяць тому
I did remove the cooler to see how the paste spread and the paste covered the CPU fine with nothing leaking on the sides or edges.
@sunny-vega Місяць тому
@@xUltimatex oh really cool that it's alright. I have been told to just put a tiny spot in the middle 😅
@mdjl1978 Місяць тому
@@sunny-vega better too much than too little. The i-9 14900k is so thermally limited. Maybe should have got one of those contact plates for around the CPU.
@sunny-vega Місяць тому
@mdjl1978 Is the 13th of the i9 also limited? Might adjust my own paste..
@xUltimatex Місяць тому
@@sunny-vegathese higher end CPU’s tend to get very hot. I would maybe see a video to see how others put their paste on the i9 13th gen. Like he said, better more than little.
@Helios.vfx. 24 дні тому
I'd go air coming any day
@balky3527 Місяць тому
Glorp
@legendsofbouchmohs 16 днів тому
See u xultmatex next 3 years later bye we well miss u so much 😢
@xUltimatex 11 днів тому
Noooo :( I'll be back soon once I set up everything to benchmark!!!
@RagingGrinch-TechGaming Місяць тому
Not sure how you’re spending 6k I’m building my first in a week once all my parts come in. I got the 4090 FE edition i914 gen asus z790 F mobo ROG aio cooler and many more top end parts only running me about 3,200
@xUltimatex Місяць тому
Prices for all items i've used discounted and not are in the description. You can add them up if you want. Quick note that is in Canadian Dollars, and I didn't even include the taxes on top of each part.
@RagingGrinch-TechGaming Місяць тому
@@xUltimatex oooo okay that’s prob why it’s more money I’m in CT prices might be a bit cheaper
@lukevandonut4691 Місяць тому
So fucking overpowered. It isnt even funny. xD Have fun. I got myself the Ryzen 9 7950X3D plus RX 7900 XTX so yeah. Same but different.
@xUltimatex Місяць тому
Loving it for sure, this things rips through every triple game out!
@xradeckx 15 днів тому
no, not same, much worse yours XD
@AlexAlex-ei4fv 13 днів тому
@@xradeckxthe 7900xtx has more fps 😂😂 but the 4090 has more options and better at running multiple things and streaming
@lukevandonut4691 11 днів тому
for half the price.
@Helios.vfx. 24 дні тому
I'm gonna wait 5090 and 9950x
@xUltimatex 18 днів тому
That's a good choice, wait a little longer and it will be so much more worth it.
@ashenautumn7986 Місяць тому
That's really pretty
@drex024 10 днів тому
In brazil when a live here , all this setup cost R$15.000 (coin from brazil)
@JukkaMadonna 3 дні тому
congrats you can now play crysis
@UnboxNPlayGaming Місяць тому
how is the pc?
@xUltimatex Місяць тому
It runs amazing. On a quick note, my ram has to swapped out to the cl34 version as it wasn’t compatible with my motherboard. Waiting for the new ram to come in.
@UnboxNPlayGaming Місяць тому
@@xUltimatex awesome. Is the cpu flawless and what’s the temps? :)
@UnboxNPlayGaming Місяць тому
@@xUltimatex I wanna get an I9 14th gen but maybe i7 14th gen
@xUltimatex Місяць тому
Higher end CPU's tend to get hot, would recommend a liquid cooler always! On idle, scrolling through youtube with a few background apps it runs 38-45 and fans run completely quiet and low rpm. @@UnboxNPlayGaming
@UnboxNPlayGaming Місяць тому
wow thats low@@xUltimatex
@Haz3mns-lil-pookie-bear 15 днів тому
NO DONT EVER PUSH DOWN ON THE CPU OMG THATS WHAT THE METAL BAR IS FOR. IF U DO THAT AND U MESS A PIN UP CANT SAY I AINT WARN U
@xUltimatex 11 днів тому
Thank you for this, got a lot of comments about pressing on the CPU. I didn't press it that hard and thankfully it's fine, but next time i'll let the metal bar to its job.
@Haz3mns-lil-pookie-bear 9 днів тому
@@xUltimatex thank you, with your hands you align the cpu and drop it in and make any adjustments to it to make sure it’s in, then take the metal bar and shove it down into the little hook.
@official_exprism 23 дні тому
that 4090 grafics card is like $2k 💀
@Nixohc 22 дні тому
okay ur point?
@TechGameDev Місяць тому
5 months later the RTX 5090 is three times more powerful than the RTX 4090
@Helios.vfx. 24 дні тому
Well he decided to get it now and play. Which is fair. As for us, we are Waiting for 5090.
@xUltimatex 18 днів тому
I am willing to upgrade when that comes out but for now, this is good enough. I ensured my case is as big as it is for a reason, if I need to upgrade there's space to do so.
@xradeckx 16 днів тому
Then you sell the 4090 and get 5090 which is the problem
@xUltimatex 11 днів тому
@@xradeckx Nvidia has me in a chokehold, what can I say 😅
@Vulper664 Місяць тому
broskie cheaped out on the case
@amathystbeam1730 Місяць тому
More then you can afford pall
@Atrcn Місяць тому
💀 my guy, thats a 5000D airflow case. He has to be baiting
@Vulper664 Місяць тому
@@Atrcn it’s around 180 my case is 250
@luckymaggie6594 Місяць тому
I have never used i9 before
@yanihadjsaid1000 Місяць тому
Dont need an i9 for gaming trust me
@Helios.vfx. 24 дні тому
@@yanihadjsaid1000agree
@koek4539 29 днів тому
To be honest, it kinda looks like a 'more expensive must be better' build. You could've saved so much money for the same or even more performance. I mean, mate look at that ram. Ram is fucking ram man, it doesn't matter much really xD. On the other hand, who the fuck cares what I think. It's your money and your build. Nontheless, amazing build en nice vid. You're gonna enjoy it a lot!
@xUltimatex 27 днів тому
Will not disagree with you, Ram is Ram! They hype up all this cooling, flashy build quality and LEDs on your RAM for little to no difference! I've been wanting to build a PC like this for years since I was younger, thus, why It was done this way. Definitely better ways to go full performance, maybe even save me some money. This video did way better than I expected and if I can get into making more content like this I'll definitely adjust my future build(s) better. Thanks a lot!
@koek4539 27 днів тому
@@xUltimatex Yeah, I can totally understand that. I'm planning to build my first 'real' rig somewhere end of this year. Depending when the new GPu's are coming out. And I caught myself too many times being like: I don't NEED it, but I kinda want it.
@xUltimatex 18 днів тому
@@koek4539 Haha, if a little wait means something better it doesn't hurt. Hope that goes well for you.
@corvus2663 24 дні тому
This should be enough for roblox :)
@xUltimatex 18 днів тому
Definitely enough for roblox
@dawnstroup4698 29 днів тому
'promosm'
@tomorpedreiro3032 23 дні тому
shame about slow rams
@gabrielplays511 5 днів тому
Kinda a overkill gaming pc for your first pc.... Good pc anyways.
@Ramon_92 Місяць тому
Next video benchmark the shit out of that pc !
@ChiBrianXIII Місяць тому
Dope as this is, it'll be outdated in 2 years pretty much, especially with going for the overpriced 14900k when the 14700k is the much better value.
@xUltimatex Місяць тому
Yeah man sadly, word of the 50 series is already out and intel releases a new cpu every year. Nothing new. I’ll enjoy it while I can.
@MrAnimescrazy Місяць тому
What are you talking about this pc will last a very long time.
@heroicsquirrel3195 Місяць тому
Outdated, do you know anything about pcs? This thing will be running games amazingly for years, i wouldve gone with a ryzen 3d chip though as i only care about gaming
@deagzzzshorts Місяць тому
you got 4090 for cheap
@xUltimatex Місяць тому
When I bought it there was a huge shortage, I may of gotten it for a bit more than retail.
@user-fl3ux4fq5w 9 днів тому
죄송한데요. 주인님 제가 사실은 연구를 하는데요. 이건 한가지 안고 가세요. 사실은 컴퓨터 업그레이드 또는 컴퓨터를 조립 하잖아요. 그럼 어디든 컴퓨터 조립 이니까? 아무데서나 A/S 되겠구나 1년 무상 그런데 실제로는 컴퓨터 조립 에 관련된 법률이 사실은 분해 해서 A/S 검토 하잖아요. 그런데요. 커스텀 수냉 쿨러 조립 컴퓨터는 A/S 가 안되요. 또는 대기업 에서는 공장 출고가 된 제품은 업그레이드 조립 불가 에요. 고객 과실로 인한 것은 유상 으로 하겠데요. 그럼 진흥원 에서요. IMF 를 전화를 걸어서 상의하는데 장사 하는 분이 피해가 커요.
@SaucyReal Місяць тому
Why intel and not AMD. i thought AMD was faster.
@Helios.vfx. 24 дні тому
Maybe Gus personal choice, which is pretty fine.
@Skype_X 22 дні тому
Intel i9 is the best by far
@Helios.vfx. 22 дні тому
@@Skype_X for gaming yeah,
@xradeckx 15 днів тому
@@Skype_X 7800X3D destroy i9 and cost half XD
@Skype_X 15 днів тому
@@xradeckx nahh ive had both only bad thing about intel is heat but still preforms way better
@user-ky4gp1ln6m Місяць тому
🛢️🛢️🛢️🛢️🛢️🛢️
@nicholaskay185 Місяць тому
Ok but going black for this kind of pc should be a crime
@xUltimatex Місяць тому
Haha, If I ever build another one and have the budget to make a nice aesthetic setup, going for all-white fs.
@pachecooliveira427 27 днів тому
O cara faz um video de 15 minutos pra mostrar o pc montando por 2 segundos. Que merda em?
@AkronicalMC 21 день тому
parents money
@JynxedKoma Місяць тому
Really bad AIO choice and thermal paste method. You should have gotten the ARTIC FREEZER III and used the spread method since you're using the 14900k.
@xUltimatex Місяць тому
Really chose the AIO so that I don’t need so many applications for rgb and fan control. Thermals have been fine, but there sure are many better AIO’s for the price!
@JynxedKoma Місяць тому
@@xUltimatex But the Arctic Freezer III also comes with a non-ARGB version too, and Arctic is one of the highest performing for cooling 13th gen and above.
@xUltimatex Місяць тому
@@JynxedKoma I don’t disagree, I used the Corsair AIO just for simplicity and the overall factor that my entire computer can run off the icue application. Heard great things about Artic and many other brands that could perform just as well.
@freshmoney899 Місяць тому
Boorrring all you dudes make the same videos
@Ttbeballin24 Місяць тому
Stop hating
@6able666 Місяць тому
all that hate don’t look good smh
@freshmoney899 Місяць тому
@@6able666 who hating it’s the same pc I always see no originality
@sewercell 18 днів тому
Not overkill
@t-ks3zh 2 дні тому
wowsers
BRO COOLING
Переглядів 326 тис.
PC BUILDER JAHID
Переглядів 47 тис.
Ferhat Çelen Game
Переглядів 30 млн