I own that table saw and know it comes with a push stick, for love of wood working please use it. Great build though, well done!

Great work! I have the same saw and will be building something very similar. Don't worry about the Safety Sallies demanding you use the push stick. Use common sense and eliminate distractions and I'm eurr you'll be fine!

Those castors are a fantastic addition to a nicely executed project, and well done for honestly showing the mistakes you think you made.

Nice and better than basic for sure. Please use a pusher more often. You sent shivers down me back lad! I would put those castors on all legs; it makes for easier maneuvering of table into a particular spot. You could glue/attach a lump of wood at the user end of the sled where the saw peeks out. Don't saw right through it so you never see the saw blade at the pushing end. Your mistakes will be my victories. Thanks for highlighting them so others don't repeat.

fantastic things 💯💯💯

Rubin, Well Done!!!! A couple of considerations: 1-Coat with an oil finish. I’m a fan of Tung Oil, food grade(it’s useful on many other things) 2-Make yourself an infeed stand to support long work when you’re ripping planks. It provides stability to your cut and eliminates that seesaw/up and down motion. 3-I’d put a round over or chamfer to the plywood top. That’ll eliminate split edges should you smack it or lift something heavy up on it. Other wise well done Mark

I'm glad you had enough spare time to make a new video. Inheritance Machining made a nice camera rig a while back. It might come in handy in your small shop.

Very nicely done, Im definitely going to do a project similar to this. Just bought my first house with a garage.

Mooi om te zien hoe je zo gepassioneerd bent met wat je doet!

Beautiful design and execution.

Such a nice bench! Tank you for inspiration

Outstanding job.

Really nice work! Thanks for sharing.

Great job!

Awesome design!!!

Strong work!! Great build!!

😮😮😮 Oh dear God will you get a push stick. Lucky to have your hands intact after the tablesaws first use. Nice job though. Looks Great.

Great work. Got some ideas while building mine. 😊

Cool bench Ruben, those torsion boxes are really handy! Wish my shed was big enough to accomodate such a bench!

Great build!

Next time try to use more rigid tubes for the extend for the vacuum. Rigid tubes are a lot less restrictive than flex tube. Same thing with bends. Try to make them as flowy as possible. Try to avoid sharp turns. That way you get much more suction power and less cleaning afterwards.

Looks great good job

One of the best elegant and functional designs I've seen .I am considering. building this for my Dewalt saw. Has anyone built this table with the legs of the saw attached so that you could move the saw to another work site if necessary,.

Hey Ruben! Great job you did there 👍. Keep it up !

I really like your table design!! ❤

Very nice job.

I enjoyed watching this video. It has been a while since you posted a new video, when I saw you posted this, it made me happy. Thanks for sharing this project with us. I learned a few things. Keep the videos coming.

Very nice design.

Good job

I have the same saw and have been looking at an easy/elegant solution like this. Thanks. Have you looked at the videos for adding a soft start to the saw? It's cheap and works really well.

gonna do something similar but much smaller, nice table

Very nice.

Love the design would you have plans and cut list available for sale?

Very cool!

My setup is very similar. I installed my dewalt table saw so when the fence is all the way extended, the lactch sticks past the table edge, just enough to lift. Great job.

Very nice

Great video and table design! And for all the ones griping about push sticks, real men don't need 'em! :D

I was screaming, your hand! Your hand! Move yours hand! In the office 😂

Great little project, you did a very good job on it. Do you know how many hours were spent building it?

Love this build! Do you have the plans for this by any chance?

If you decide to build a workbench along the wall, make it exactly the same height as your table. You will not regret that.

You need a push stick 😮

I have this same saw and looking to make a new workbench for it. One question - how do you remove the riving knife in your setup?

Such an inspiring video! Love the possibility of roling it aside and free up some more floor space. How thick are the plywood plates?

I'm going to be building my own bench soon and I'm jealous you have a flat floor to work from. My garage\shop floor is a mess and can't be used as a reference for anything! A few comments \suggestions: -- you may want to double or reinforce the plywood beneath the dogholes so the hole tools have more surface to push against. -- was there a reason you centered the saw in the table? It seems that having more room on the blade side would be helpful when using a sled or cutting wider stock? -- when doing the rails along the sides it looks like making them flush with the table top can help when pieces need to be clamped vertically to the table top. -- at some point in the future are you considering adding a bench vise or other clamp? I have a bunch of left over construction plywood that I'm going to laminate for my build as well and I wish you many happy years with your new table!

Amazing build. Do you have plans? Thanks

Nice build. I couldn't help but notice that you didn't leave any access for the living knife lever though.

Would you be willing to share your plans for this work bench?

Any plans for that table . I like the idea

Great video and an excellent design. Do you have the plans available?

Awesome built! Im planing to build the similar kind of table and Im in doubt about total height of the saw...In specs, its written that total size is 330mm, however, when I measure it, its 325mm. Now I just do not know at what point to put side surfaces and made them flash with the saw table. Any thoughts on that?

Could you tell me which blade you twiched out to, as I'm new to wood-working and I have the same table, love the videos. thank you.

Knap gemaakt! Zelf zou ik ook de tijd moeten vinden om dit soort werkbank te maken. Wat heb je als hoogte voor uw werkblad genomen?

Do you have a link for the retractable castors ? ... Thank you, enjoyable video.

Muito bacana ficou excelente seu projeto BANCADA PARA SERRA foi uma ótima apresentação e muito boa à demonstração valeu obrigadao muito útil valeu obrigado VALEU 🎉🎉🎉🎉

I bought same table saw DWE7492 last week, and I'm gonna make workbench which can integrate with it. Very good reference you gave. Tks a lot. BTW, isn't there any PDF plan?

How do I view those plans? Great build!

I would love for this to be my first project. Do you know where I could buy the plans?

Nice!! can you share the plans?

What are the dimensions of the bench ? Do you have plans ? Nice bench. Well done

Hey Ruben, I am discovering your channel. Great stuff and nice to see some Belgian folks in action. I am not sure about your table saw model, but didn't you block the access of the lever that allows to remove the riving knife? 🤔 Great build 👍

Yoooo use a push block or stick, and lose the long sleeves before you lose fingers! Otherwise that's a nice build!

I wouldn't have put screws in the end of plywood personally because it's not strong enough for me but it looks great anyway, good job

Very awesome projects...can you give the drawing plans for that table, much appreciated thanks

Great build 🤩 Can you share the plans?

Very nice design; simple and so useful...! That DeWalt is nicer than my table saw...! God bless ALL of us! WWG1WGA

A perfect idea. Can you share the plans, and if you have the file for the 3d corner piece. Thanks for a great idea.

This is.great - could you share the plans?

Beautiful job…. Thanks for such a great video. As someone who has lost a tip of my index finger to a table saw blade…. Dude,…. Please be careful. Use a push stick more!! Watching your hands moving around that moving, open blade at your fast video playback speed, shows how close you get to that blade. Please keep your fingers!!

hello, i can use this tools "dewalt table saw" for cutting pvc board too? maybe 18mm or more

Nice workbench! Are you willing to share your plans?

How does that 90 degree work? I would think it would clog up trying to make that turn. Interested to hear how it works. Please use a push block/stick. Sixty thousand table saw accidents in the US every year and about fourteen thousand of them result in amputation. Be safe and great video.

How about getting your plans for the build.

Hi - great build, where can I get a copy of the plan of this workbench please?

How much would you charge for plans? Highly interested

I really like this table. How can I get the plans

Do you have sketch-up plans for the bench?

well i have seen better, but, it depends on what are you planing for use it for... i am not an woodworker, so i don't judge, yet i don't thing this plywood work table will serve you long.... thanks for the video, i really like it!

The instant that I saw his hands pushing timber past the moving blade I checked out. As if there aren't enough dangers in Woodworking without doing unnecessarily dangerous things !!!!!!!!!!!!!!

can you provide the plans for this with the fixed mistakes??

D9 you sell plans to this build

do you have the plans published somewhere? Would you mind sharing / selling them?

How do you get plans for his table

Would it be possible to receive the plans?

Hello. how to get a plan for this workbench?

Adapter piece and a 90° turn is really bad for airflow. Upgrade to a dust extractor that has ID of saw instead. You will upgrade later on regardless, trust me :)

Are you going to share/sell your plans ?

Plans?

I would lose so much in that table and have to swim in the middle to grab it

Airflow HATES 90 degrees corners. Otherwise cool workbench

Very good bench & a good job all-round. Not to be picky but, I have the same table saw &, they are probably the best table saw available for a benchtop design however, the 2nd mistake you mention will turn into a 2 1/2 mistake with that top piece that you cut to fit the grab handle recess as, you will need to access the bottom blade guard underneath the the saw top to clear off-cut pieces out which become trapped inside the blade housing. It is easily accessible in the normal situation where the saw is mounted on a benchtop however, in your case, you will have to remove the inletted section of the bench top on the right hand side to remove the saw from the compartment to gain access to the lower blade guard. Maybe you could consider a separate inletted piece which can be lifted out which would allow quick saw removal.

LOL. he says lets do some heavy lifting and then very easily proceeds to lift the entire thing.

You looked strange in the intro (very low res, no shadow, your shoe disappeared into the box, etc.). Green screen?

Really nice build, but first kickback on your new table saw and you're going to lose a finger or two... hopefully I'm wrong about that. Please! do your hands a favour and make or buy a push stick and push block!

I like your video I don't like your music 👍

Use the table saw guard and push stick or you will become a 9 finger carpenter. There is no excuse for not using the safety devices that come with a tool. I don’t watch UKposts channels that do not comply with basic safety protocols.

#3 mistake - there is no access to handle releasing riving knife, #4 mistake - 90 degree connector is not good idea. In case of the sled, I think it is oversized - you will see this after a few hours of work, also method of checking 90 degree cut is very poor - a simpler and much more accurate method is to cut a piece of board in half, turn one part over and place it against the other along the fence and check for a gap (assuming the sides are parallel); of course there is more accurate method called 5-cut. And, next time buy better plywood - this one is piece of crap

Please stop going so close to the saw with your fingers, at start its important to learn to use the machine in a propper and safe way, just get a simple extension pike. I love your video but stay safe good sir.

As many have said before. For the love of your fingers please STOP pushing your wood through like that. Use a push stick, gripper block. Develop a mindset and safe practices around machinery that can have life altering consequences.

Clearly not the smartest builder...