Camera Car With Pan Tilt Control | ESP32Cam
Переглядів 166,136
День томуIn this video we are going to make upgraded Camera Car with Pan Tilt Control.
Using this Pan Tilt Assembly we can rotate the camera horizontally and vertically from 0 to 180 degree.
We will capture images using esp32 camera and send these images to our mobile phone using websocket through wi-fi connection.
We will control car using our own mobile app.
We have resolved some of the issues related to esp32cam with servos.
I have explained in details each step along with code.
👉 Please subscribe: ukposts.info...
👉 Components list:
✅ ESP32 Cam module (Canada amzn.to/3t62LED) (India amzn.to/3UIyib1)
✅ Pan Tilt Servo assembly (Canada amzn.to/3JcmkRl) (India amzn.to/3fBptAO)
✅ SG90 servo motors (Canada amzn.to/3MGfvtD) (India amzn.to/3sVTY7D)
✅ 4WD car kit (Canada amzn.to/3i1PdDW) (India amzn.to/3t1WcCc)
✅ L298N motor driver module (Canada amzn.to/3J98zTJ) (India amzn.to/3hfLIwJ)
✅ 7-12 V Rechargeable battery (in our case lipo 2s battery) amzn.to/3q4SjLN
✅ UBEC or buck converter ( Canada amzn.to/3MQ35PJ )
✅ Arduino Uno for uploading code (Canada amzn.to/3JpiGE5) (India amzn.to/3E0VefL)
✅ Double sided tape
✅ Jumper wires (Canada amzn.to/3I8fZVG) (India amzn.to/3heE3Pa)
👉 Shorts Channel :
/ ujwalnandanwar
👉 Code and diagram:
github.com/un0038998/CameraCa...
👉 ESP32 board URL:
dl.espressif.com/dl/package_e...
👉 AsyncTCP Library:
github.com/me-no-dev/AsyncTCP...
👉 ESPAsyncWebServer Library:
github.com/me-no-dev/ESPAsync...
👉 Elevating Car
• Elevating WiFi Car usi...
👉 Camera Car
• Surveillance Car using...
👉 Wi-Fi Car
• Smartphone controlled ...
👉 Hand Gesture controlled car
• Hand Gesture Controlle...
👉 Bluetooth car
• How to make Bluetooth ...
👉 Obstacle avoiding car
• Arduino Obstacle Avoid...
👉 Arduino RC car using nrf24l01+ module
• Arduino RC car using N...
👉 Obstacle avoiding car
• Arduino Obstacle Avoid...
👉 Arduino RC car using nrf24l01+ module
• Arduino RC car using N...
👉 Watch more videos:
/ hashincludeelectronics
👉 Follow us on Instagram:
/ hashincludeelectronics
⏱Chapters
00:00 Intro
00:50 Components
01:53 Pan Tilt Servo Assembly
02:29 Car Assembly
03:20 Connections
05:14 Code Explanation
09:11 Code upload (Using Arduino Uno)
09:28 Mobile App
09:50 Car Demo
11:17 Important Points
#esp32cam #pantilt #hashincludeelectronics
@darcynog 2 роки тому
Nice improvement to your previous project, which I implemented. Now we can control what the camera shows.
@hashincludeelectronics 2 роки тому
Thank you very much 👍🏻
@johanclaassen3584 Рік тому
Thank you for the video and detailed information! I followed your instructions and was able to build this in just a few hours.
@hashincludeelectronics Рік тому
That’s awesome 👏🏻. Happy that it worked 👍🏻👌🏻
@rameshthapa4034 8 місяців тому
Can u help me to build this plzzz
@Dasol0246 Рік тому
Thank you, just what I was looking for. Thanks for stepping through the code
@hashincludeelectronics Рік тому
Always Happy to help 👍🏻👏🏻
@RohilMShah Рік тому
@@hashincludeelectronicsHello i was making this but i am not able to download the diagram and code please please help me
@otisirachi9816 11 місяців тому
Thank you for the well written code. Very easy to understand. I love the control button and slider layout.
@hashincludeelectronics 11 місяців тому
Thank you very much 👏🏻👍🏻
@alexfernandesportrai Рік тому
Superb Tutorial. I have tried three of your projects with great success. I am 60 years old with absolutely no background in electronics, but I love the way you simplify things. Thank You!
@hashincludeelectronics Рік тому
Thank you very much for checking out the video and your nice comments 👍🏻👏🏻
@lobib Рік тому
How to convert this project from AP mode to STATION MODE please help
@simplers4519 5 місяців тому
@@hashincludeelectronicsVideo quality is very poor from esp cam..plz rply fast tomorrow is project submission🥲
@SURAJKODAKANDLA Місяць тому
😂😂@@simplers4519
@almarezjoshuad.1382 Рік тому
too many videos that i watched and this is the only one that help me a a lot it is very simple and easy to understand code
@hashincludeelectronics Рік тому
Thank you very much for checking out the video 👍🏻 I am glad that this video helped you 👏🏻👏🏻
@adityanarayansingh4876 8 місяців тому
Thank you so much.Because of you only my all projects has gone nicely
@hashincludeelectronics 8 місяців тому
That’s really awesome news👍🏻👏🏻
@gappy500 8 місяців тому
far more worth it than buying some rc car with mounted cam, i wonder why youtubers for exploration use that instead, this is more portable and cheaper
@hashincludeelectronics 7 місяців тому
Thank you very much for checking out the video 👍🏻👏🏻
@yashfu 2 місяці тому
Bro add port forwarding using some portable router ie that old 4g jio router. So that it uses internet and it will have unlimited range (untill network goes off)@@hashincludeelectronics
@aritrabaidya9029 Місяць тому
It's more for educational purposes and also it's generally for those who want to understand the mechanism and working in order to improve or create newer ideas. U are free to look for convenience and buy a ready made one but they build it to make us understand it's working(for those who need to know it).
@gappy500 Місяць тому
@@aritrabaidya9029 it is relatively cheaper, even though looks not as cool as the rc cars with frame, but in terms of price it's a little difference cheaper, but still kind of expensive since you gotta have esp too
@RCRoads Рік тому
Awesome pan and tilt on the camera. The video quality looks great on your phone. 🏆🏆
@hashincludeelectronics Рік тому
Awesome thank you!
@tirtowijarso7189 3 місяці тому
Excellent , your explanation are superb !.. no single time wasted & very clear , I think about miniaturized this project into micro rc
@hashincludeelectronics 3 місяці тому
Thank you very much for checking out the video and nice comment 👍🏻👏🏻
@ryanbayu7738 10 місяців тому
Thanks for the tutorial sir.. hope you are healty and became richer and happier !!
@hashincludeelectronics 10 місяців тому
Thank you very much 👍🏻👏🏻
@balasubramaniamramaswamy6557 2 роки тому
Very nice and interesting project👏👌. Really useful one as a final year engg college project. Best wishes for many more innovative extensions to this project👍🌷.
@hashincludeelectronics 2 роки тому
Thank you very much 👍🏻
@risdiyara1 2 роки тому
How all price to make it?
@anchorsites4158 Рік тому
wonderful explanation and idea, ever best platform on the youtube ....
@hashincludeelectronics Рік тому
Thank you very much 👏🏻👍🏻
@hotwheel3089 11 місяців тому
Thank you 👍
@tuillino Рік тому
now i am in a good mood
@phucdinhviet6320 11 місяців тому
thank you very much
@kmhooibg7577 Рік тому
best video best project, helpful🤩🤩
@hashincludeelectronics Рік тому
Thank you very much for checking out the video 👏🏻👍🏻
@sindusagarkamurthi7655 Місяць тому
Thanks for the code explanation sir.....vey necessary topic.👍👍
@hashincludeelectronics Місяць тому
Thank you very much 👍🏻👏🏻
@sindusagarkamurthi7655 Місяць тому
@@hashincludeelectronics can you make a video using an ip camera and esp8266...
@sindusagarkamurthi7655 Місяць тому
@@hashincludeelectronics sir , Can you make a video using esp8266 car but i should control it with my home wifi (controlling thorough internet) and an ip camera interface.. Any idea...
@Daniel-xg4pl Рік тому
Thankyou dude... Good work.
@hashincludeelectronics Рік тому
Awesome 👏🏻 👍🏻
@TechnoShuvo360 2 роки тому
Amazing Friend.... Good luck...
@hashincludeelectronics 2 роки тому
Thank you very much 👍🏻
@davydbar Рік тому
Hola, excelentes videos muy buenos proyectos y tutoriales!! Gracias
@hashincludeelectronics Рік тому
Gracias 👏🏻👌🏻
@marquesmoreira6892 Рік тому
Boa Noite! sou seguidor novo, sou leigo também, fiquei admirado com este projeto, fiz todo o procedimento mais não aparece a nova rede em meu celular, o que devo fazer?
@zofmod Рік тому
love it nice job bro
@hashincludeelectronics Рік тому
Great 👍🏻
@samermohsen389 Рік тому
Hi mrs it was a great proj. I have a one issu.. How i can change the resolution for CAM to be proper to my laptop ❤
@FixitEasyDIY 9 місяців тому
Thank you brother! I tryed it and it works perfect! Your videos are inspiring!
@hashincludeelectronics 9 місяців тому
Thank you very much for checking out the video and nice comment 👍🏻👏🏻
@crushonfoodie3167 5 місяців тому
hye nice [project. you have the stimulate for this project
@hashincludeelectronics 5 місяців тому
Thank you very much for checking out the video . No I don’t have simulate for this project 👍🏻👏🏻
@sushmitham5723 4 місяці тому
Its a good project with great explanation..i have successfully implemented the project...some of the points that have to be kept in mind for Beginners are... 1) power up the ESP 32 cam with the help of buck...the output of l298n may not be sufficient..hence the ssid may not be visible in WiFi list 2) please turn off the mobile data and then search for the ip address 3) make sure the motor speed is at minimum position and then test the car... All the best 👍
@hashincludeelectronics 4 місяці тому
Thank you so much for pointing out some of the findings . This will surely help others as well 👍🏻👏🏻
@GSR-jn6th 2 місяці тому
bro so thanks for saying this , i am also facing this problem
@GSR-jn6th 2 місяці тому
@@hashincludeelectronics bro can you say which type of buck converter can i use and how
@GSR-jn6th 2 місяці тому
Bro I connected all pins correctly it is showing inn network and all are working but the car is not moving , please give me a solution for this bro.
@sushmitham5723 2 місяці тому
LM2596 buck converter will work for this...if you are correct with the connection and power supply and all... atleast you will hear a feeble sound when you trigger with the mobile app If so set the motor speed to mid level in your application Hope this will help you 👍
@kumaranganesan176 Рік тому
bro can we use anntena for poor connectivity problem
@Bianchi77 Рік тому
Creative video, thanks :)
@hashincludeelectronics Рік тому
Thanks a lot 👍🏻
@mcwondermcwonder Рік тому
can we change the tilt fitur to something else? like to enable a sensor maybe and how can we connect the button with the fitur. Can you help me please?
@user-qh3hs9gc7f 4 місяці тому
this is helpfull💖💖😊😊👌
@hashincludeelectronics 4 місяці тому
Thank you very much 👍🏻👏🏻
@akshatt25 7 місяців тому
Please can you make a video on how to capture and save image on laptop using esp 32 cam please please please before 18 sept or tell me via reply please
@user-nb1sh9mv2l 11 місяців тому
Thank you for the video and detailed information! I followed your instructions and was able to build this in just a few hours. but How can I add on/off switches and display them on a screen for remote control of the project to scale it up?
@hashincludeelectronics 11 місяців тому
Glad it helped!
@rameshthapa4034 8 місяців тому
Plzzz help me to build this..... Iam facing errorrs
@chthongonzalez Рік тому
Hi! I loved the tutorial but I was wondering if I can use other pins to add some LEDs ( Im building a miniature vehicle and I need some LEDs inside ) ... How can I add them into the code that you already have? Thanks for all the tutorials ! cheers from Chile :)
@hashincludeelectronics Рік тому
Thank you very much for checking out the video and nice comment 👌🏻👏🏻. Not sure if there are pins available on this esp32 board for LEDs . If there are pins available then you can copy paste the code for button which can be used for LEDs .
@chthongonzalez Рік тому
@@hashincludeelectronics Thanks for the reply! Yeah I ended up connecting the LEDs directly to the battery with another switch ( with some resistors to lower the V ) :)
@hashincludeelectronics Рік тому
@@chthongonzalez nice 👌🏻
@MeanGyrene 3 місяці тому
Can you substitute the AMB82 mini for this design? BTW your channel is great. You clearly know your stuff.
@hashincludeelectronics 3 місяці тому
Thank you very much for checking out the video and nice comment👍👏. Unfortunately we can not that module in this project . It will need different kind of coding and connections .
@MeanGyrene 3 місяці тому
@@hashincludeelectronics thank you for the quick response. Your insight is helpful.
@MariusGheorgheSFilm Рік тому
Thank you! Keep up the good work!
@hashincludeelectronics Рік тому
Thank you very much and I am glad that I could be of some help through the videos on UKposts 👍🏻👏🏻
@elmardasmarinas678 Рік тому
Great work! impressive!! is that possible to add two or more servo motors for this project?
@hashincludeelectronics Рік тому
Thank you very much for checking out the video 👍🏻. I don’t think there are enough pins left for more servo motors . If there is any pin left then you can use it .
@elmardasmarinas678 Рік тому
How possible to utilize PCA9865 module on ESP32 cam so it can able to drive more than two servos while driving two DC motors?!
@hashincludeelectronics Рік тому
@@elmardasmarinas678 that’s nice idea 💡. You can try use that module and share your experience with all of us 👍🏻👌🏻
@deshwanthgowdaks7471 Місяць тому
Thank you ❤
@hashincludeelectronics Місяць тому
Welcome 🙏
@deshwanthgowdaks7471 Місяць тому
@@hashincludeelectronics Sir in this everything alright but left side dc motor not working any solution?
@hashincludeelectronics Місяць тому
@@deshwanthgowdaks7471 check the connections. Or replace the motor 👍🏻👍🏻
@siddharthvyas4695 День тому
I want to seperate enA and enB pins which you connected to io2 port. The io4 port is currently unused. Because when ena and enb pins are connected to io2, only one side works. When Ena disconnected (right side works) when Enb disconnected (left side works) but not together
@VladDElectronics 2 роки тому
tnks!!!!!!!
@hashincludeelectronics 2 роки тому
Welcome 👍🏻
@jamesgalos Рік тому
Any tips how I can fix it I've use two l298n motor driver but it still not working
@kisahinspiratif007 Рік тому
great tutorial.... is it can be controlled from anywhere via internet? does it have to connected into the same wifi net between car and mobile apps?
@hashincludeelectronics Рік тому
It is controlled locally .
@fabriziolongo83 Рік тому
Great project. Is it possible to add a label with a sensor value on a web page? If yes....how I can do it?
@hashincludeelectronics Рік тому
Yes you can add that . May be create html element as text and send this value from esp32 using exiting websocket connection. Check the code for more reference .
@sauravkumarsinha7559 8 місяців тому
Great project Esp32 ko connect kaisekare arduino se program ke liye
@hashincludeelectronics 8 місяців тому
Thank you very much for checking out the video and dropping a nice comment 👍🏻👏🏻. You can check my video on wifi camera car for this step 👍🏻👏🏻
@veenakumari9484 Рік тому
Hey bro what have u used along with ubec converter I mean to connect it to servos
@hashincludeelectronics Рік тому
Those are just normal jumper wires
@carlosmateoluisreyes3229 Рік тому
I would like you to start replacing the sp32 with a Bluetooth module.👍👍👍
@hashincludeelectronics Рік тому
This esp32 module also has Bluetooth inbuilt . You can use it easily . Check my video on Bluetooth car where I have used the dabble app to connect using Bluetooth .
@Robotix_LAB 9 місяців тому
Hey brother 😊great job but the car is not moving what is the minimum voltage should be supplied to move the car and make the camera on with the servos
@hashincludeelectronics 9 місяців тому
You need to use rechargeable battery from 7-12v and then step down the voltage to 5v using voltage converter. Basically you need to provide 5v supply to this project. You can also provide 5v supply directly if you have . 👍🏻👏🏻
@TicoLaurindo Рік тому
Nice project !!! What is the greatest distance the car travels? Thank you.
@hashincludeelectronics Рік тому
Thank you very much for checking out the video 👍🏻. It can go till 50-60 ft .
@TicoLaurindo Рік тому
@@hashincludeelectronics thank you!!!
@TicoLaurindo Рік тому
Hello friend. Thanks again for sharing your project. I want to assemble 2 cars to play together with my son. I assembled the first one using your project, and it turned out really cool! I have a question: Is it possible to put another ssid network and another password? So I can start both cars at the same time? How do I do that? Sorry for the english... Thank you.
@hashincludeelectronics Рік тому
Thank you very much for your comments 👍🏻👏🏻. Yes you can use any ssid and password of your choice.
@omkar9940 2 роки тому
Can you please show how to connect metal detector and GPS module with LCD displaying latitude and longitude coordinates on it?It should show us coordinates on LCD after detecting metal.
@hashincludeelectronics 2 роки тому
Looks like an interesting idea 💡
@omkar9940 2 роки тому
@@hashincludeelectronics will you do this project?How much time it will take ?
@hernansintado2989 2 роки тому
Thank you very much for the Project. It helped me a lot. I have two questions. 1 - In the webpage the image stuck frequently but the buttons works ok . Do you have any recommendation? 2 - The motors don’t work when I connected enA and enB to IO2. The motors only work when I connected to enA and enB to 5v. The IO2 output always is at 1.2v. Do you know why? Thank you so much . Regards Hernan
@hashincludeelectronics 2 роки тому
Please check the video for important setting . Also make sure you make the connections as per circuit and shown in video 👍🏻
@tapeface2863 2 дні тому
I am having the same issue, can you share how you solved it, if I connect either ena or enb, respective sides work. If I connect both, neither side works
@DHESTAR 2 місяці тому
Thank you bro I got an IOT project expo prize for making this in January, but when I did the same project I was having some problems, the wheels rotated automatically when I connected them to the battery. What to do know
@hashincludeelectronics 2 місяці тому
That’s really great news . Yeah please check the power supply. Use only rechargeable battery . Check for loose connection 👍🏻👏🏻
@ctepler48 11 місяців тому
Hello weird question will servos work without UBEC or buck converter but I will connect with normal jumper wires?
@hashincludeelectronics 11 місяців тому
UBEC or buck converter is used to step down the voltage to 5 v so that it can be provided to servos with good current capacity . This UBEC can provide upto 5 a . So you should use it . Else you need to provide other 5v power supply which can provide more than 2-3 A current . 👍🏻👏🏻
@user-hs5jr9qw5m Місяць тому
can not we use power bank instead of battery?? if then how to attach please answer. love from Bangladesh
@hashincludeelectronics Місяць тому
No. This car needs 7-12 v . So I don’t think power bank can provide that voltage . If your power bank provides 7-12v then you can use that in place of battery . Connections will remain same 👍🏻👏🏻
@sabarishbabutg6519 19 днів тому
In this i will use l293d insted of l293n motor driver?
@hashincludeelectronics 19 днів тому
In that case you will have to make the code changes and also connections . I would recommend to use L298N driver only to not face issues 👍🏻👏🏻
@chauhanpratik7292 8 місяців тому
In which mode esp wifi is used , Access point mode or other one
@hashincludeelectronics 8 місяців тому
It is used in Access point mode in this project 👍🏻👏🏻
@chauhanpratik7292 8 місяців тому
Thankyou for answering the query. 😊
@darkgamedeveloper9961 Рік тому
4:42 hey bro one question. what have you used to connect ubec converter to servo motors?
@hashincludeelectronics Рік тому
Those are simple jumper wires
@darkgamedeveloper9961 Рік тому
@@hashincludeelectronics u mean you connected jumper wires to ubec converter then you connected 2 jumper wires to one to make Y shape?
@hashincludeelectronics Рік тому
@@darkgamedeveloper9961 exactly 👍🏻
@explorer8970 2 роки тому
Can you please make detailed video on coding. Do Esp32 cam only take picture. What is the code for the picture to be made as video. Pls explain,it will be very helpful.
@hashincludeelectronics 2 роки тому
I have explained the code in video as far as can. It’s very simple and you can understand by going through code step by step . It’s link is in the description of the video . Video is nothing but images displayed rapidly at regular interval called frames per seconds . You send images from camera to mobile app at regular interval and it’s displayed like a video 👍🏻hope it answers your questions . All the best
@ranking6208 19 днів тому
hi sir, what s that foam or tape you used to stick l298n module to chassis and also esp32 to bracket
@hashincludeelectronics 15 днів тому
It’s double sided tape . You can use any glue as well 👍🏻👏🏻
@ranking6208 15 днів тому
@@hashincludeelectronics thank you so much sir, may i use your code for our research paper? thank you
@hashincludeelectronics 15 днів тому
@@ranking6208 yes of course 👍🏻👏🏻
@616lizzie 2 роки тому
👍🏻👍🏻
@hashincludeelectronics 2 роки тому
👍🏻👏🏻
@veenakumari9484 Рік тому
Hey bro one more question - can use jumper wires instead of ubec/buck converter cuz it's hard to find and buy in India
@hashincludeelectronics Рік тому
Jumper wires and UBEC/buck converter are totally different components. We need UBEC for converting higher voltage to 5v . Jumper wire is just a wire .
@veenakumari9484 Рік тому
@@hashincludeelectronics oh
@christinang478 Рік тому
Are there any other alternatives for the UBEC/Buck Converter and 7v-12v DC Battery?
@hashincludeelectronics Рік тому
For servo you need to have 5v supply with enough current capacity . For 2 servos you need 1.5 A current with 5v . If you have any 5v supply with this current capacity then you can use that . However I will suggest to use the same setup which I have used in project 👍🏻
@user-hs5jr9qw5m Місяць тому
what will be the pins if i use aurdino uno connected to esp32 only i mean is it possible to connect pin with aurdino uno to motor driver module please say
@hashincludeelectronics Місяць тому
You have to use Arduino uno just to upload the code. Once code is uploaded there is no need to Arduino Uno . All connections will be wit esp32 cam module. Please check the video for more details.
@user-hs5jr9qw5m Місяць тому
leaving... hard resetting via rts pin does it mean upload is done???
@hashincludeelectronics Місяць тому
Yes exactly 👏🏻
@ahmedalathamneh4167 2 роки тому
wow great job, how is it working wirelessly with no Bluetooth?
@hashincludeelectronics 2 роки тому
Thanks . It works on WiFi 👍🏻
@regullasaidheeraj8881 2 роки тому
Wifi bro
@veenakumari9484 Рік тому
Hey bro. GOOD NEWS my ubec converter is the same as yours. The thing is that I didn't notice that u used jumper wires to connect converter to servo. Bro did u connect them by tape or soldering?
@hashincludeelectronics Рік тому
That’s nice . Please check the video for details 👍🏻
@user-rn6bq5hi2p 5 місяців тому
Thank you.this video helped me to do my project. My camera car pantilt is working but please tell me how to take and save video and pictures & sending notification to mobile.and the video showing in app is not showing straight but it showing video slidly.please tell me what to do.i am it as my college project please tell me how to do
@hashincludeelectronics 5 місяців тому
As of now we can not save the video and take pictures 👍🏻👏🏻
@user-rn6bq5hi2p 4 місяці тому
Tq.how operate it in laptop. In laptop i can't able to operate my car pantilt
@user-rn6bq5hi2p 4 місяці тому
It showing no internet but in phone it is working
@psykopat81 3 місяці тому
very good thank you.. one suggestion: can you make it powered with solar energy ? i mean, a car always ready to work.. But how can a 2s lipo battery be charged with solar energy? Or what should I use instead of 2s lipo? because esp32 cam consumes a lot of power ..
@hashincludeelectronics 3 місяці тому
I have that in list where I will make a car which is powered using solar power 👍🏻👏🏻
@psykopat81 3 місяці тому
@@hashincludeelectronicscan you share your to do list 😊
@hashincludeelectronics 3 місяці тому
@@psykopat81 hahah. I will share videos directly 👍🏻👏🏻
@rayyan7058 2 місяці тому
Brother can we use this ? UBEC Bluesky Mini 5V 3A FPV Gimbal PTZ UBEC voltage converter to create 5V output voltage from 2-6S battery pack input voltage. The UBEC is ideal to provide FPV cameras and GoPro brushless gimbals with a constant 5V voltage.
@hashincludeelectronics 2 місяці тому
Yes you can use that 👍🏻👏🏻
@rayyan7058 2 місяці тому
Ok
@danielmunizrocha7367 Рік тому
Very good video and great project. But I have a question, I configured as the video but after a few seconds the camera gets stuck and no longer sends video, how can I correct this error? thanks:(
@hashincludeelectronics Рік тому
Please check the video of one setting for MAX QUEUE MESSAGE .
@user-hs5jr9qw5m Місяць тому
is it needed aurdino uno for only uploading code or we should attached it in the car ?/
@hashincludeelectronics Місяць тому
It is just needed to upload the code 👍🏻👏🏻
@user-hs5jr9qw5m Місяць тому
@@hashincludeelectronics can not we use power bank instead of battery?? if then how to attach please answer. love from Bangladesh
@Robotix_LAB 9 місяців тому
Hey bro ... Amazing job with the video ..... can you tell me which part of the code should I modify to connect to external wifi rather than using the on board wifi .. thanks 😊
@hashincludeelectronics 9 місяців тому
Thank you very much for your comments 👍🏻👏🏻. You can check my video on “getting started with esp32 “ where I have used external WiFi . You only need to change the WiFi mode and ssid password . Please check that video 👍🏻
@Robotix_LAB 9 місяців тому
@@hashincludeelectronics I will check and get back to you if there are troubles
@rameshthapa4034 8 місяців тому
Plzz help me to build this project... I am facing errors
@hashincludeelectronics 8 місяців тому
@@rameshthapa4034 what issues are you facing ?
@rameshthapa4034 8 місяців тому
While uploading code from the Arduino to Esp32... It's showing some errors
@ayethuzaraung5373 26 днів тому
Hello Sir! May I ask a question. How did you make the mobile app Sir? Could you tell me?
@hashincludeelectronics 26 днів тому
I have created this app using html and java script with code itself . Please take a look at car code . 👍🏻👏🏻
@ayethuzaraung5373 26 днів тому
@@hashincludeelectronics Thank you for your answer Sir!
@hashincludeelectronics 26 днів тому
@@ayethuzaraung5373 welcome 🙏
@thusinesan2117 7 місяців тому
Bro can we control this device from far away like abroad
@hashincludeelectronics 7 місяців тому
Unfortunately it can be controlled locally only 👍🏻👏🏻
@JaskaranSingh-gw2kb 6 місяців тому
Sir I want to know that which version of Arduino IDE did you used?
@hashincludeelectronics 5 місяців тому
It is 1.8.13
@vaibhavgirase9029 2 роки тому
I want to use relay model in that car for operate 12 volt water pump so what changes required in that program.
@hashincludeelectronics 2 роки тому
You can easily add the relay in this project. I can suggest you with these points. 1. Check and Use the IO pins which is not used. 2. Add a button on the mobile App to control it. You can copy paste the button code. I can not help on full code and diagram as it needs proper complete testing and work. Wish you all the best 👍
@paradoxgaming2 2 роки тому
It is best idea ,you make a rover
@hashincludeelectronics 2 роки тому
Sure 👍🏻
@zulqarnainabbas6393 Місяць тому
Hello sir can we used any other thing in alternative of rc servo bec Or also tell me can we direct contact with out rc servo bec
@hashincludeelectronics 26 днів тому
Please use the separate 5v for servos 👍🏻👏🏻
@adityanarayansingh4876 8 місяців тому
Can you please make a video on how to fix fatal error
@hashincludeelectronics 8 місяців тому
I will try to make short on this 👍🏻👏🏻
@poojakhandelwal7507 2 роки тому
i done the same connection and i short 5v with uno ,esp32 cam and motor driver so motor driver should not give 5v back emf but in your case its giving back emf of 5v due to this esp32 cam get damage easily i think we should give separate 5v supply to esp 32 cam?
@hashincludeelectronics 2 роки тому
L298N driver has its own 5v regulator . And i believe it handles back EMF very well. I did not face such power issue with this project. You can try giving separate 5v to esp32 module.
@reenakumar3044 8 місяців тому
What is the range of connection between these two....
@hashincludeelectronics 8 місяців тому
I tried it for 70-80 ft . 👍🏻👏🏻
@JaskaranSingh-gw2kb 6 місяців тому
Sir the link for the Arduino uno board you give in description is a clone one. I want to ask that will it work fine with windows 11?
@hashincludeelectronics 6 місяців тому
Yes it will work 👍🏻👏🏻
@JaskaranSingh-gw2kb 6 місяців тому
@@hashincludeelectronics So do we need to instal any driver before plugging into the pc?
@JaskaranSingh-gw2kb 6 місяців тому
Also can we use a 3wheel set instead of a 4wheel set?
@hashincludeelectronics 6 місяців тому
@@JaskaranSingh-gw2kb yes you can use 3 wheel set as well .
@hashincludeelectronics 6 місяців тому
@@JaskaranSingh-gw2kb connect Arduino to laptop and it will install required driver automatically I believe 👍🏻👏🏻
@NitinSharma-pq4ep Рік тому
Great project sir, just to confirm the coding is in which language c or c++?
@hashincludeelectronics Рік тому
Thank you 🙏 the coding is in c++
@user-ss5lp3bq2m 2 роки тому
Can I evaluate this work and develop it? Will you allow me to take the schematic and code and modify it for me, or will I face problems?
@hashincludeelectronics 2 роки тому
Thanks for checking out the video 👍🏻 you are free to use code/diagram and modify it as per your need. No issues .it would be nice if you add some reference of hashincludeelectronics 👏🏻
@khanhbuidinh2801 9 місяців тому
hello, instead of connecting to its wifi to control, can you make it automatically start wifi, use another wifi to control it?
@hashincludeelectronics 9 місяців тому
Sorry I did not get your question 👍🏻
@davidjob8917 2 роки тому
If I add the antenna to the esp32, do I still need to add some code, I'm still kinda new to this stuff
@hashincludeelectronics 2 роки тому
The same code will work 👍🏻
@pushkarjaiswal4808 4 дні тому
Can u make a car with head tracking fpv camera
@explorer8970 2 роки тому
What are you using to fix esp32 camera. Is it thermocol?
@hashincludeelectronics 2 роки тому
Kind of . It’s actually foam board piece . You can use anything to fix camera there .
@user-hs5jr9qw5m Місяць тому
does we need any edit on this code or just copy and paste??
@hashincludeelectronics Місяць тому
Just copy and paste 👍🏻👏🏻
@chauhanpratik7292 8 місяців тому
Bro followed your each and every instruction. Given the power supply motor driver led turn on but there is no wifi available.
@hashincludeelectronics 8 місяців тому
How did you provide the power ?
@chauhanpratik7292 8 місяців тому
Separately like 5 v directly for servo and other with rechargeable battery
@sasangankrishnan5371 2 місяці тому
Can you please help me with the conversion of code where we use all control button and sliders in blynk app
@hashincludeelectronics Місяць тому
I have not yet tried Blynk app for such projects 👍🏻👏🏻
@govtjob4913 Рік тому
have anyone faced the video stream freezing issue on esp32 cam while trying to use face detection
@shreeyashsalpe2436 5 місяців тому
What was that small component you used in the project ????
@hashincludeelectronics 5 місяців тому
It is called UBEC. It’s like a voltage converter from 12v to 5v 👍🏻👏🏻
@rayyan7058 3 місяці тому
Can i use 2 lithium ion battery 18650,i have bo motor it will work and how to identify positive and negative of bo motor
@hashincludeelectronics 3 місяці тому
Yes you can use that battery . There is no positive negative for motor . If you switch the wires then direction of rotation will change . 👍🏻👏🏻
@RanbirSingh-mc8ll 11 місяців тому
And what is the need of using the rechargeable battery for it I want to know that because if I will no I can also think that how to manage it
@hashincludeelectronics 11 місяців тому
It provides sufficient current power 👍🏻
@ctepler48 11 місяців тому
Hello another question, do you know why Tilt might be always looking up, like it's being told to look there no matter where I put the slider?
@hashincludeelectronics 10 місяців тому
May be your servo position is not initially set at mid position while mounting it on frame . 👍🏻
@ctepler48 10 місяців тому
@@hashincludeelectronics well that will be hard to fix. Thank you
@victordreyer4689 Місяць тому
hi, everything look good for me. except that i don't have anything show on the website. The camera didn't displayed anything and i try to add another library, connect it again and all but i don't find any solution can i have some help ? ty !
@hashincludeelectronics Місяць тому
Please use rechargeable battery to avoid power related issue if any . Also check the video again to not miss any step 👍🏻👏🏻
@user-hs5jr9qw5m Місяць тому
how did you connect the two jumper wire into 1 enable a and enable b
@hashincludeelectronics Місяць тому
Please check the video slowly and carefully 👍🏻👏🏻
@malaluanjerico675 Рік тому
Link for ubec hehe thank you !!
@hashincludeelectronics Рік тому
Please check this amzn.to/3MQ35PJ
@malaluanjerico675 Рік тому
Thank you po
@sifou1737 Місяць тому
Bro i dont get your last remarque should i use 2 power supply ? (2 batteries or what )?
@hashincludeelectronics Місяць тому
Make sure your total battery voltage is 7-12 v. 👍🏻👏🏻
@sifou1737 Місяць тому
Thank you
@hashincludeelectronics Місяць тому
@@sifou1737 welcome 🙏
hash include electronics
Переглядів 36 тис.
hash include electronics
Переглядів 82 тис.
Comedy Club
Переглядів 2,9 млн
Радіо Свобода
Переглядів 455 тис.
Серіал К.О.Д.
Переглядів 575 тис.
How To Electronics
Переглядів 254 тис.
Hash Robotics
Переглядів 96 тис.
Electronic Clinic
Переглядів 144 тис.
spline
Переглядів 411 тис.
spline
Переглядів 411 тис.