You Should Know These Things if You Run a CNC Router
Переглядів 13,059
День томуTake four minutes to take in four bits of knowledge, courtesy of Carbide 3D.
Follow us on Instagram for regular Tips of the Day
/ carbide3d
@dennisschulze439 14 днів тому
I use an ultrasonic cleaner >$150 with Dawn dish soap, then put my collets, bits, etc in Isopropyl Alcohol. Works great, no rust on anything, and non-toxic.
@EricksonWoodworking 15 днів тому
I need to up my clamping game! I foresee an order of Crush It Essential Clamps in my future. I work consistently with 3/4” material, would spacers still be recommended with double sided tape underneath?
@wizardofboz 15 днів тому
Why not just use the depth function of your calipers on the other end? That's what it's there for.
@Anthony-H 15 днів тому
Yeah, why wouldn't you use the depth gauge for that?
@PiercesPerfectPieces 15 днів тому
Why not just use a micro hite?! 🤔🤷♂️ 😒🤦♂️
@davewithhemp 15 днів тому
I'm legit confused by the vid. lol
@carbide3d 15 днів тому
The method you are describing is for the "depth of a hole" measurement. The "Step Measurement," is for exactly the purpose shown. classroom-qualical.teachable.com/courses/64230/lectures/947056
@wizardofboz 15 днів тому
@@carbide3d the straight-on angle in the video does not make it very clear that's what you're doing, it looks like you've just lined it up by eye. IMO, the depth gauge is much easier and quicker to do with one hand as well - just apply downward pressure and slide till it stops, rather than trying to hold a narrow metal edge on the stock while extending the calipers with the wheel. Maybe it's a practice thing, but why practice to get better at a harder method when the depth gauge already gives me the right answer.
@PiercesPerfectPieces 15 днів тому
Great advice on the Pure Lye Kevin, Thank you! What’s that olé saying: "Life is hard, it’s even harder when you’re stupid"! ** Not that you nor anyone else is (cause Lord knows I AM) I’m just saying people ATTEMPT, FAIL & LEARN. ATTEMPT, FAIL & LEARN. THEN FINALLY ATTEMPT, FAIL, CALL CARBIDE 3D, & LEARN! 🤨 What used to be "common sense" & "general/basic knowledge" 20, 30 40 years ago is now brain surgery to a lot. That fancy book 📖 learning will only get a person so far. Attempting + Failing + Learning = Success (take it from me I’m an excellent FAILURE) ✌️ #TeamHumanity
@pipwerks 15 днів тому
Nice tips, but never use lye with aluminum, it's a dangerous combination. If you have aluminum stuck to your CNC bit, wash it off before using lye.
@carbide3d 14 днів тому
A small amount of lye is mixed into 2 cups of water. The endmill is then placed in that solution.
Alexey Arestovych
Переглядів 967 тис.
Nicholas Demski Product Reviews
Переглядів 24
James Biggar
Переглядів 483 тис.
Sienci Labs
Переглядів 6 тис.
Вадим Шегалов.Оккультные игры элиты
Переглядів 18 тис.