And a magnetic bit is even better.

Soap is used to avoid splitting the wood without making holes before.

@@nicoch59 Soap or no soap, if the board is too narrow or you’re too close to the end it could split without a pilot hole. Try putting in a couple of screws with a hand screw driver - put soap on one and leave the other without - you’ll see the difference right away.

zzzzzzzzzzzzzzzzz. wtf? i’m so impressed by you guys . no no thats not it Got it! you guys are so impressed by yourselves. 😂😂😂😂😂😂😂 Those that can DO. those that can’t criticize 😂😂😂😂😂

@@jimmorrison3035 well, you’ve pretty accurately placed yourself….

This clickbait titles are DUMB like the owner!

That's funny

Now we know how to screw with a shitty uncharged screwdriver with a shitty bit.

Now that I know these secrets I am going to steal all of the master carpenters business! You are all screwed!

I once had a thriving, multi-billion dollar a year business, thousands of happy employees. Now, I'm penniless, living on the streets, only by the good graces of generous people am I able to beg a living now, all because of these video's. Damn them, damn them all to hell. 😆

Amazing how salt and hot water can improve an egg

😂😂😂😂

If only it helped to pre-drill, which would've taken less time than soaping up the screw.

Lmao thank god I was just about to comment this pop

Wow just pre drill the hole, common sense

Your comment is that epic, i cant stop laugh for those benefits lmao

Yes, YOU ARE SO RIGHT ABOUT THAT. You learned something from him. It's the experience of life. Thanks for the experience of life grandad. We ALL love or grandparents.

12 million views wow!

😂 love the comment

It's very generous of you not to mind others watching.

I prefer the krieg for my hidden screws

@@justinkeppler9860 Kreg.

@@kgriff087 typo

Sssshhhhhhhhh!!!

How y'all are gonna have to schedule an emergency meeting to decide how to punish this guy.

Those tricks were freaking stupid in my opinion. Dude is definitely no carpenter.

Omerta. Death to any who reveal our secrets.

I had a trade secret building stairs for years and wouldn't show anybody else how to build them and put me out of business. Not something all Carpenters know how to do.

Ache io !!!☺☺☺

😊👍👍

Or use torx screws and a stronger drill if needed like pros usually do as they have no time to put some garbage on all the screws

and always sand along the grain which he also didnt do

Or if client is being cheap with the screws and brings Phillips heads, I usually start pre-drilling every screw I need to use, after few hours of that they usually understand the more expensive screws will screw them less then all the time wasted that they are paying me for not working as effectively as I could.

@@NotEvenDeathCanSaveU Yup, torx or square drive is the way to go. I'm never buying PH or PZ screws again.

i paid 8 k to learn words like longitudlal axis ( not in spell check lol ) so "should share the longitudal axis " .

Согласен с тобой полностью

Теперь чтобы вкрутить шуруп в дерево, без мыла не обойтись))

@@Yarikspell8888 парень просто зря потратил свое время ! Я только что крышу закончил делать и все шурупы спокойно входили и не нарушали структуру дерева )))

С такими то темпами далеко не уедешь,ну руки и голова не дружат,

Cut the end of the nail clean off. This will leave a crude chisel edge on the end which will sever the wood fibres as it is hammered in. An untrimmed nail with its point intact acts as a wedge which is why it will split the board if too close to the end. Sometimes it is possible to nail down a board and then cut it to length when nailing is complete.U seful when working close to the end of a board. If you have to nail near the cut end of the board, your best chance of a good fix, is to drill a pilot hole and lube the nail. Soap, candle wax, vaseline, a smear of grease, neutral shoe polish, or nick a dip of your wife's moisturiser cream any of those will work. And a bonus is that it is kinder to your drill driver and its battery,if instead of nailing, you decide to use a woodscrew to make the fix.

Это для ЕГЭ

Also rub the hammer face on concrete keeps the hammer from sliding to one side.

Stop telling our secrets. Remember the blood oath we took. 🤣

We all start one day... Even my father was a carpenter, it doesn't mean I can do everything right immidiatly. I have to learn a lot, and I do by watching these different videos, not by the ironic comments...

@@susannebrunberg4174 Sorry you found my comment ironic. I do stick by what i wrote. I merely made a point of letting him/you know that there was a problem with some of the things he was 'teaching'. Just ignore my comment altogether. Good luck to you in your quest for knowledge.

Just what I thought after 1 second watching: wrong bit type... 🙄 I'm a carpenter, btw

@@murales it is yeh !

@@susannebrunberg4174 Carpentry is one of the most satisfying jobs, and in my case, hobbies I know, and yes we all have to learn. But you will NOT learn if the people in these vids are teaching you poorly. One was even demonstrated to be poor on the second "correct" attempt. (nailing close to end grain) 1. A pilot hole should be close to the internal diameter of the screw thread if you are screwing into wood. There is very little control of the screw in the video. Depending on the purpose of the piece it is sometimes better to drill a complete clearance hole for the screw. Soap is ok for lubrication but a SMALL dip of the top portion of the screw thread into clean axle grease is less wasteful. 2. The hidden screw "hinge flap" technique is brilliant and not really a secret; but remember, it may not always be an appropriate technique, you may, at sometime, want to know where the screw is for dismantling an item should the need arise, for whatever reason. Using a larger drill bit to create clearance for a screw head can, sometimes, "grab" the grain and go deeper than intended. Countersink bits are inexpensive and a good tool to own. A good one will do metal as well as wood for a good 3.The end-grain split STILL occured because, as some comments have pointed out, the pilot hole was on the small size and he should have "blunted" the nail before driving it home. I have no idea if you plan a career in woodwork or, like me, enjoy it just as a satisfying practical hobby but I wish you all the best and enjoyment of the lovely emotions you will experience when you stand back and admire a job you have done well.

God or push a little harder.

Or by a new bit

Haha

You don't need to drill the screw through a bar of new soap, just rasp the side of the screw across any old piece of soap but BETTER STILL get yourself a tin of tallow to use and then your screws will go in and come out easily when you need them to.

Or you can... Use the correct bit that isn't borked already.

I would use a Robertson screw and bit. No cam-out. Pilot hole for nails but not for screws. How does this embarrassing video get 5 million views?

Because here are so many beginners.... I understand, if you have been working as a carpenter for 40 years for example, this video would be ridiculous, right?... But then you wouldn't be watching it either...

@@CrazyRev people will make any old shite videos just to try and get noticed

Dove is what I find best 🤣

Lol

I guess he didn’t have room left in his pouch for a counter sink

@@chefblundard2051 just the trusty imperial leather, apparently it's screws in much better and only takes 25 mins per screw

Даааа, уроки труда, хоть и баловались на них, многое дало. Ой многое.

"Ты, Каштанка, супротив человека, все одно что плотник супротив столяра..."

Плотник супротив столяра, что собака супротив человека (с) Чехов

Я так и не понял, у кого титул выше, у плотника или у столяра?!

@@user-no1bs8gu8s По цитате из Чехова это не понятно? Да и вообще, по сфере применения должно быть очевидно. Сделать дачный сортир и оконный переплёт это сильно разные компетенции.

там вроде не филипс, единственно что немного с размером не попал

Нет с мылом саморез действительно легче крутится и не скрипит если дерево плотное.

Но согласись гвоздь в отверствие,чтоб доска не дала трещину это сильно,никто бы недогадался)!

@@observer0395 ага, и если еще раз посмотришь, оброти внимание, она все ровно треснула

На саморез можно просто плюнуть. Учитесь сынки пока папа ещё жив.

No soap? Jeez

Yes but what happened to the screw he put in under the flap?

And if that piece was about to be mounted onto the wall , how to clamp down the chiseled part?

Geir Jørstad for the wall use a different method counter sink the screw so you can hide the head with wooden dowling/peg and clean up or paint

Sono 43 anni che faccio il falegname , sono d'accordo con te !!

@@diegobraito2925 p0 I opo

The way the bits are seated in the drill is bothering the fuck outta me😂

@@dennisslaughter9929 g

also works to use screws intended for wood instead of metal sheet screws. and if the screw has a PZ2 head it helps to use a PZ2 bit instead of a PH2.

chicken grease works too

Indeed, most soaps are pH 5,5 (skin-neutral) and therefore a little acidic.

I like a wax based bicycle chain lube.

Old timers kept a block of bees wax in their tool box…I still do.

Right on.....as a carpenter I'm not threatened by any one discovering our SECRETS..,...nothing gets u around basic skills....

@@stevewight1409 but the crazy thing is that they're not even secrets . Doesn't everyone know these things ?

@@jacobcarraway1989 no, I'm not really surprised. I was just being facetious. It actually saddens me how many people in this world can't navigate anything if it doesn't involve a keyboard and a mouse

@@jacobcarraway1989 👍

@@jacobcarraway1989 There are many people who like to learn and watch the video, 7 million views on this one alone. However, there is a huge difference between knowing how something is done and having the skills to do it. Skills take time and practice by doing. No one would think they could be a concert violinist by watching a few youtube videos and reading about it online. Yet, all of these people think than can watch a few youtube videos and go out an build a house. My dad used to say, it's not which screw to turn, it's how far to turn it. They don't call them skilled trades for nothing.

Use an impact driver.

Haha! Thankyou. I was wondering wether that was soap or wax!

He could of used wax paper so it wouldn't stick. And you correct about the sanding. 👍

that is a secret for another video

😆👍🏻

what is pz2

www.finehomebuilding.com/2015/09/16/what-is-the-difference-screw-bits-phillips-vs-pozidriv

@@albertsaenzjr.3546 pozi drive bit instead of Phillips head. The 2 is the size indicator of the bit. Pozi drive screws such as is used in this video have 8 points instead of four ( if you look close you will see four little slots in between the main four)

@@mikeslater6246 that is what pipe clamps are for. It makes sense if you're not going to laminate over the face and don't want filler to break up the grain. Also in a butt joint situation you could use a corner clamp.

I don't see any problems with a force trying to pull out the screw. There would be only problems with some influence, which tries to turn out the screw, but just pulling on the screw will not have this effect. However, liquid soap is much more conveniant to lubricate a screw than the soap shown here.

Sorry , but you are wrong. End of. As a time served, Master carpenter and joiner, O.N.C ,, H.N.C. C&G and started in 1965, I have worked on Cherished buildings, listed buildings protected buildings, and indeed my joinery, (I had my own joinery and wood mill, and an engineering factory) Is in the oldest still lived in property in the U.K. And I can tell you in the days of yore, they used tallow, and or candle wax to lubricate screws, and bloody large ones at that, I have unscrewed 4 inch 20's steel countersunk screws from oak that were still solid and holding fast after over a hundred years, and there were only four of them holding up a huge oaken staircase to a factory, which I sadly , very very sadly had to rip out and replace with an iron staircase to comply with fire regulations. Lubricating screws is also common, most hardwoods, and on wooden boats, to no detriment. Tips and tricks from a non tradesman timber waster. Sorry chap, but clearly you are no tradesman, and little more than an amateur wood butcher. You would be better off cutting firewood with a bolster and rubber hammer so you don't hurt yourself!!

@@MrChrissy1r do you have a channel or recommend one where one could learn from a high standard of excellence in carpentry?

Could also turn the nail upside down to dull the point and the nail will not split the wood. Also rubbing the nail through your hair (if you have some) will lubricate the nail making it easier to nail.

@@kenparker99 Those two methods work well except I have very little hair anymore and stopping to blunt the end of each nail is more time consuming than a quick glance and a roll with your fingers to make the nail cut through the grain rather than wedge it apart.

Whoah 🤯 I don't want to sound daft but I don't understand what you mean. Wait I figured it out wow that's cool.

@@1994toyo it probably takes about half a second to blunt your nail a little bit and then nail it with the grain belt and braces yeah

Hammers used to have a little spot for your bees wax/lube for nails.

Counter sink bit will still leave the screw exposed. Number two was the win, the others not so much.

My father thought me the same he was a great carpenter he made our wooden cars when we were little kids, Love my father.

Например забить гвоздь в дуб можно если макнуть кончик гвоздя в расплавленный парафин. Зажёг свечу. Макаешь кончик гвоздя в расплав и забиваешь

true, that happens when a whole lot is shaking is going in

hehe

Ha so true

Drill a pilot hole. D'oh.

I still don’t get what was the point of hiding the screw ?

@@olegrudoi4024 aesthetics

Hiding a fastener like that "wood" take too much time unless it's for Goldie Hawn. How about anywhere else but the edge?

@@chrissimon8368 Or maybe don't judge someone else because they don't think the same way as you, keeping a smooth look with something more than wood grained decals is quite appealing to anyone looking for a clean look on a nice piece. Stranger things have happened.

Hiding the screw under a layer of the board is NOT a brilliant idea. Five times out of ten you'll chip or flake off the layer of wood you're trying to lift, especially if the wood is dry, and especially if the grain doesn't lay just right. Don't believe me - try it yourself ... Use dowel - it's quicker, and far stronger (me, a carpenter of 40 yrs).

А на кройке и шитья даже с вазелином

Да бородатый лайфхак

Саморез блять где???))))

а европейцы пищат от восторга))) не мешай им кайфовать ;)

exactly !!!!

@@dd1965 Commercial bar soap does not absorb water. It dissolves in water. Ever notice that the next day your shower soap is dry? If absorption was the case a bar of soap not used would be slimy, which it isn't. What room is more humid than the shower room? But homemade soaps, 'organic' soaps,all those high price soaps, contain glycerin, which is a humectant. That means it draws water out of the air.That's why those soap are used for dry skin and why they seem to 'sweat' in warm humid weather. Just thought I would add some Science to the soap/wax debate. But, I use wax. It seems to work better.

I am a recreational woodworker, not a pro btw. In dry wood I pre-drill, in pressure treated for outdoor projects I use wax and no pre-drill and always coated deck screws because the box store wood is wet. If I am doing it wrong, let me know. I appreciate help. thanks

Use beeswax here. Candle wax is another alternative.

My question. He put a screw into a board, glued the chiseled piece down and clamped. ( i didn't see the tip when he finished sanding,did you?) How does he attach it now? Haha, i know, example, but if he screwed it into something, then how can he clamp it because probably no room.

soap works really well, but only use it if you want the screw to rust in solidly, we used to use it on door hinges.

Yea... that looked like a PH1 bit and a PZ2 headed screw

Yes! This is why cut nails are so useful and they prevent splitting

Really?

Teu cu !!!

No way!!!I was 🏆 in 96

Só que tem um porém, o sabão em barra tem na sua composição soda cáustica e vai provocar que o parafuso mais venha sofrer uma corrosão, eu já vi isto a muitos anos atrás, valeu campeão.

Yeah, " a dica dois" is right 😂

Don't feel offended,it's just a trick to garner views....I guess.

I didn’t know that carpenters kept so much soap on hand lol

@@Razor1138 Most carpenters I've known over the decades have been fairly clean.... Others not so much.

😂👍

Ага, если 10к? На мыле угоришь😁😁😁

Я, думаю, достаточно просверлить направляющее

Outro passando sabão na rosca do parafuso para madeira pra enferrujar o parafuso e soltado Deck de madeira

He predrilled the soap, but not the wood.

I'm not sure if this is a serious video or not

Or you can pre drill. Wow people are dumb

😂😂😂

Melhor usar cera de velas, o sabão depois de algum tempo vai oxidar o parafuso e se precisar retirar, já era!

Salam alaikum