what is the powder you used to boil and clean the bracelet.

I enjoyed your video. It brings memories of the braided and twisted rings and bracelets I've made over the years. I learned a few new things watching you and reading the comments. Thanks to all.

If you bend the cuff into an oval instead of a circle then it will fit your wrist better not leaving so much gappage (

Awesome bracelet. Cuffs are my favorite and yours turned out beautifully. Nice work! Handmade pieces are the best!

Fun and wonderful work at the same time

Genial, al fin un brazalete diferente. Lo ame.

Nice project with copper!

Muchas gracias por compartir tan bello trabajo, gracias

Nicely done.... good looking cuff

Very nice. Never thought of using citrus/citric acid for a cleaning. Very interesting pattern after final filing and polish. Thank you for making and sharing this video. For shaping bracelets I usually use an oval instead of a round mandrel, or the horn of my 68kg farrier anvil (long story how I acquired it) or both. An oval fits better to the wrist if it is for arthritis. (Folk medicine that seems to work, some wear copper to help ease pain of arthritis. It seems to change body chemistry. When one first starts wearing the copper, their skin may turn greenish at the spot. Over time that stops and maximum benefit is obtained.)

Absolutely Gorgeous ❤🔥🔥🔥👏👏👏

Love the finished product! I have a suggestion though.. you should reface your anvil and give it a mirror polish, or as close as you can get. This will help the finished product have a much better shine after flattening 🤙🏻I’m a blacksmith so it’s a bit hard to see an anvil that coarse and rusty

Great job , I use a drill to twist my copper which gives perfect twists everytime especially with bigger gauge wire but I agree with what you said about keeping it authentically hand made and your end result is beautiful , thanks for the video and btw i found your instructions easy to follow much appreciation from Perth Australia P.S. hang onto your silver it'll be worth a fortune soon :)

Nice 👍👍👍👍👍👍👍👍

Just BRILLANT thanks from France

Very Nice Bracelet and Video. Thank you

What is that white powder solution you heated with the torch to clean it at the end?

Beautiful work

Love the videos buy it would be cool to have some comentary in the video. Maybe explaining what you are doing and why.

Is the purpose of heating the copper to remove the hardness and make it more malleable?

Awesome your a master for sure

No need to rush to quench when annealing copper. Also better to leave wire straight to do the next stages of annealing. Copper work hardens so bending after annealing produces local hardening at the positions where the bends are straightened.

and you are a great artist

Nice idea twisting thinner gauge wire around thick gauge. You need to work on the evenness though, the loops are quite uneven throughout the whole length. I suggest clamping a single wire into vice and the other end into a cordless drill and spin it until it's completely straight, when you make all your material straight then twist them together. It's better to start with all your stock material straight.

What kind of white paste and material was that in 5:48 ? Was that flux and silver solder?

What is that green wax that you used to seal the bracelet from tarnishing?

Gut gemacht, Mann, видно руки из нужного места растут!👌 Захотел делать украшения из меди, нашел твои видео, буду смотреть и пробовать

Nice work!🛠️🔧😁🤟😄

So good

Good idea, bit I have a doubt..is it necessary warming to metal several times? Some people did it one or two times.

Muito show!O que é aquela pasta branca que vc colocou na pontas antes de colocar fogo ?

I don't understand all the negative comments. I like it so far I've got my wire twisted but I've got to figure out how to rig a table vice since I don't have one.

This is a very substantial cuff bracelet... very cool! ❤ Beautiful craftsmanship on the bracelet and I like your manual wire twisting technique. It's quite clever to use an allen wrench as a crank (I wish I'd thought of it! 😄). I already have twisted wire waiting for a project like this but not sure my kitchen torch will provide sufficient heat. I may have to practice making a less substantial cuff instead... or use silver. Thanks so much for sharing! 😊

Interesting idea. But i think it would be better if the bracelet was more oval shaped to fit the wrist better.

Sempurna 👍👍

Wow!! I am a collector of jewellery by far. But completely new to jewellery making! Why do you heat the copper the. Submerge to cool then hammer then repeat ? I would assume heating it would harden it. But then hitting with hammer will soften it again. I'm confused. I'm about to do my first wire wrapp this weekend with a huge amber piece with 1.5mm pure copper wire. So trying to learn as much as I can ready

Waaawwww Amaziiinnggg 👍 👍 👌🏾 👌🏾

what did you solder on to the ends?

Not sure if I missed it but copper will tarnish quite quickly when exposed to skin oils. Were there any protectants coated on the finished product?

Lindo trabalho parabéns 👏👏👏👏🇧🇷

Looks like you went straight from 240 to 2000 grit. Was wondering if you skipped over the intermediate sanding in practice or maybe just didn’t film it.

Gracias felicitaciones y siempre adelante

Lo puedo hacer en casa con un soplete normal de los que venden para repostería? Cuando echas la pulsera en un líquido, qué es, agua? Muchas gracias. Me ha encantado el vídeo. Saludos desde España

What is the material you melt on the ends of the bracelet to hold it together. Great video thank you

Nice job.

Awesome! I also like your curved work table......I might have to pilfer that idea from you if you don't mind!

IF U DONT HAVE THE ACID, WHAT CAN U USE IN THE HOUSE AS A CLEANER?

A very beautiful bracelet made of copper wire, maybe I'll make myself the same =)

Thank you for the idea. Do you mind if I use that as the starting point for another idea?

When he 'finished' the ends he soldered it with something- was that silver solder or a flake of something else (copper)?

Excellent

Привет, очень интересно. Спасибо 💗

Vinegar works for cleaning out cracks and stuff like that

beautiful

The tools you used to make the braided wire? I know the vice, and the Allen wrench. What was that round thing? That was a great idea.

Nicee 👌🙏🙏

You did good

New friend here great job great video

I didn't know copper annealed by rapidly cooling it. I thought metals had to cool down slowly for annealing to happen.

Very nice

I can't quite make out the writing for the lengths. Is it: 2 x 1.5m long 1.3mm diameter wire, with 2x 16cm long 2.6mm wires? Thanks for the cool tutorial!

Muy bueno trabajo saludo me gusta aprndo

Get you some Safety Wire Pliers and it would help you twist that wire quicker and evenly i used in it Aviation that's where I've started using mine.

Great job overall but I think with your skills you could have made the two ends much nicer. They're kinda rough looking. But nice work

Gracias por compartir tan bonito trabajo, tienes mi like y mi suscripción. Felicidades,

Can you tell me all the tools you just used?

May I ask what torch and gas you use ? I need to buy the right one for copper soon. Thanks much for videos and reply ! Love your channel and subscribed !

linda pulseria, gostaria de saber qual produto usa na ponta da pulseira, parece um pó

Nice

Desde chile muy linda la pulsera una consulta como se llama el polvo con que disolvió con agua y calentó para,sacarle las impureza del cobre grasias

👍🏽👍🏽👍🏽👍🏽👍🏽👏🏼👏🏼👏🏼👏🏼👏🏼

Bravo

Q es lo q le has dado para q no se ponga fea ? El cobre mancha y se oxida enseguida

How do you get the “bubble” out of the wire when you’re twisting it up? Does it just come out naturally? Also great video keep it up!

what is the paste youse used to weld the ends of the braclets?

what are you soldering with?

when you seal the ends of the copper braid don't flux it up

what is the gel you used 5:31 & 5:41 is that a flux ?

belo trabalho

Nice work, would a template made out of wood to shape the bracelet get a better fit for your wrist

I don't know much about copper. Why are you heating it and quinching does that make it softer

I am needing such a ring but continuously enclosed. To help regulate my blood flow.

Casi bien. Espero que te sirva para mejorar.😊

Aplique uma camada de ketchup,deixe agir por alguns minutos depois lave em água corrente, fica limpo!!

Whats the purpose of all the heating?

what you do to make sure the copper won't stain one's skin?

What is the solder of cooper how did u make it ?

Faço essa msm peça bem mas rápido e com duas ferramente e no lugar desse pó branco Isso limão kkkkk

Why did he burn the copper wire at the beginning?

Why do you have to heat it so many time? What does this do

Looks to familiar. Too too catch familiar wrist bangle

👏👏👏👍👍👍

Oh and subbed to😁

I tried to wear a similar bracelet, unsuccessfully. Either my hands are excessively hairy, or I need something smoother and with fewer holes to capture the hair.

Why do you heat it up so many times?

You must display a name. The materials you use at work

Ja do wyjmowania rzeczy z kwasu używam pensety miedzianej.

Bellissimo

Мастер х-стер!

why heat the wire with a torch??