😭😭😭

Lol

What was the point of what he did?

​@@yhgamiel21 its called cpu reballing I think, Look it up.

@@aleclaja9917 Cool

Literally

I'm still here doing it since 2011. Never made any vids. Wish I did.

​@@porsp You should bro. ❤

@@solomondees.4632 haha maybe I will. I remember searching for iphone 3G repair vids and there were only a couple. Some were even fake.

I hope there will be more technology repairing channels and shops

yes 😁

Терминатор собирается

that hit me hard.

Mission log Phobos base - Day 187: The oxygen generator has stopped working again, narrowed down the issue to the CPU board in the Modular Electronics Controller Unit this time. I used my only spare a week ago on the main power bus unit after that one got fried by an electrical short following the crash. The same incident also took out the orbital relay dish as previously mentioned. Attempts to reestablish satellite uplink today using the short range transmitters has been unfruitful, it was a long shot I suppose, but worth a try. In regards to the O2 generator issue, there is a another unit with a compatible board in the rover which I can see lying on its side some distance from the Eastern viewport, it seems mostly intact from here however I am unable to reach it as the environment suits are kept in hab 3 and the connecting tunnels from hab 1-2 and 1-3 were destroyed when the supply ship's propellant and oxidizer tanks went up, I am completely isolated here. I can see fragmentation damage to both other habs from here and they appear to have both depressurized. Mission Commander Hamilton, Mission Specialist Williams and Mission Specialist Wehrner... are presumed deceased at this point. Will try cleaning the board and connectors for the generator in hopes of restoring functionality, If the unit is still nonfunctional after this I calculate there is enough left in the reserve tanks for maybe a week. If anyone recovers these logs sometime in the future, let my family know. Tell my wife and kids that I am sorry and... I tried.

Wow! It gives off such a cool atmosphere!​@@extremepredudice

Now you see.😊

Wkwkwkwk😂

Song name ?

​@@dailytechytchannel7 snowfall

@@rayvhendmanalip2108 thanks

@@noneofbusiness9764 øneheart x reidenshi - snowfall

@@dailytechytchannel7 snowfall

thanks for info 🌹

Why? What's the diff between the old and new ARM?

Why not just turn it off and on again?

🤯

​@@herrbonk3635 The new one is not broken.

🌹 🌹 🌹

this is the same processor. The repairer just rebolled it

Same CPU dude, just did a BGA resolder.

yes 😊

Made in taiwan

10 000 antyty для 2013 норм

MT6737 i use in Karbonn titanium jumbo... good phone at 6K...🔥👍

Nope

idk I would say its fuckin useless

thank you 😭😭😭

@@techshowmobilerip chip 2015-2024 (It was in a nexus 5x)

exactly 😁

😁🌹

👍🌹

Fascinating.

For those who didn't know: this guy posts videos of bees eating geckos.

oh is it? we thought it was a sandwich getting grilled 😂🤣

​@@sanjay7pisces i also thoughg so😂😂😂

😊🌹

yes you are right 👍 👍👍

music definitely got to you on this one huh, lol

I assume you're one of my team mates crying about lag as an excuse to their 0-15 stats, if you're able to find similarities between CPUs and bricks

No one is saying that humans today couldn't build the pyramids, we totally could. However if you took away all our machines and tools and left us with only the tools that they were supposed to have back then (according to current accepted history), then we couldn't even come close to building them. That's the paradox people talk about. All the accuracy and precision needed that you just can't get with the basic tools they are supposed to have.

and that is why history is so so wrong@@Psi105

🙂

Hope he gets well 😭

Yeah, it's basically a brain transplant

​@@erenyayger3840mentally disabled people : how dare you to assume it's gender 😡😡😡

Plus it's so satisfying to watch

@@karthikc07 Absolutely. One of my main sources of entertainment. I got into this whole thing because of TronicsFix.

You'll love Louis Rossman UKposts channel then

@@sourabhshete1994 Been a fan of him for years.

yes you are right 👍

@@techshowmobile😂

It seeps in under the chip anyways.

👍🌹

Glad it helped!

💀

how?

how bro how it saved you.

the real question is how bro got that many likes on his comment

​@@shaunkeith4087you know nothing about board level soldering

@@shaunkeith4087 Actually it does. Its like in cooking how oil helps distribute heat more evenly.

What type of flux is that? The regular orange brownish stuff dries out too quick

Name of music track please 🙏🙏🙏

Snowfall @@YOBAMUSTDIE

thanks for watching 🌹 🌹 🌹

@@techshowmobile thanks for doing board level repairs!

Sure. Do it. 😊🌹

hahaha

@@techshowmobile father allways told me with patience you achieve anything

Because the have microscope bro . We dont

Sometime me too 🤣🤣🤣🤣

@@techshowmobile how do i learn this

thanks for info

thanks for watching 🌹

🙄😶

"homework"

you are right 👍

yes you are right 👍 thanks for watching 🌹

ok😢

@@TutorialAndroidService why are you sad know

Учись и оно небудет падать толька держатся на конце паяльника.😅

Я другу на носок большую каплю олова случайно скинул однажды) Это было очень смешно)

​@@cargo.zam.a а разве оно не застынет, пока долетит до ноги?

​@@kikabust2191 будет очень больно. Застынет на коже

@@zaurchannel4657 ого

yes you are right 👍

Was going to say the same. Too much solder and you're screwed. Too much blowing the heatgun and the chip goes flying, ...

I am motherboard 🙄

I cried :(

Это шыдевр!

When you know the fact that they will never get back together, you feel depressed

Personifying SMT devices that emote. Wonderful example of what AI is capable of generating- even as of now with what it is. Truly remarkable.

👍😊

thanks for watching 🌹 🌹 🌹

И раздербаненые катушки ещё.

Блин, а я вот вообще например никогда не понимал, почему шары находящиеся так близко друг к другу и не спаиваются и не замыкаются, так как иногда чип кладут не идеально контакт к контакту когда припаивают, может я тупой, хотя сам паять умею, но не чипы

@@titanraw поверхностное натяжение + текучесть

поставил на паузу и полез в комменты, на моменте нанесения флюса на верх чипа! upd: а вот вижу, склейка кадра, оказывается флюс на чипе не помогает отпаять его, смотрим дальше =) upd2: посадочное под чип очищено как попало. upd3: если я правильно рассмотрел, то старые шары с чипа не снимались, и это пздц, про посадку я ваще молчу, где то во время посадки случился факап, и кадр опять склеили как в случае с флюсом в начале. Короче в видосе всё прекрасно xD

😭😭😭

yes

🫣😁

not really a big deal, but he was pretty greedy with the flux

А что не так? Я не пробовал такого, но полагаю, что расплавляясь на корпусе, флюс затекает под него и никуда более. А если нанести по периметру, то потоком воздуха его разгонит по всей плате

@@ValmerKill Вообще то он здесь тоже разогнался за пределы кадра

@@master-user потому что многовато навалил

@@techshowmobile 👍👍👍👍👍😐👍👍👍👍👍👍

​@@master-userа как ты думал естествено разогнал это флюс

thanks for watching 🌹 you are best 😊

flus help that

🌹

Glad you liked it!

😊🌹

🙄

🌹

Visit only a training center or a mobile repair worker

@@techshowmobile yeah, only issue is i don't live near a big city which possess something alike. i live in the north of Canada, self learning stuff like this is my best shot.

@@joel14roy Best Way to Watch UKposts Videos

🌹

Yo igual, trabajaba reparando en un centro autorizado de Sony en Perú, extraño ese trabajo, literal era lo único que me gustaba hacer

you are right 👍 😊

thanks for watching 🌹 🌹 🌹

sorry 🫤

Thanks ❤️

🌹 🌹 🌹

😁👍🌹

thanks for watching 🌹

ok 🫡

thanks 🌹

👍🙃

🌹

thanks man 🌹

Most welcome 😊

😱😱😱

hi man 🤔🌹 What's the problem

@@techshowmobile O problema foi que levei meu celular para o conserto, ficando lá por três dias, e disse que não dava para consertar,eles depenaram o aparelho utilizando várias peças dele,me entregando só a carcaça. 😥

@@techshowmobile The problem was that I took my cell phone for repair, staying there for three days, and they said it couldn't be fixed, they plucked the device using several parts of it, giving me just the housing. 😥

thanks for watching 🌹

Indeed!

​@@techshowmobile he asking to changing the chipset on the same performance level but from other brand. Can it run

Kirin - my favorite of all the time!

Noo these different processes have different architecture

@@tigerpirate1849 And different pin out too. As long as the pin is same, the hardest part is to reprogramming the firmware so it can connect to other chip, like IO to storage chip and rams.

hi 🌹 I'm late for reply 🫣 Unfortunately not possible

@@techshowmobile thank you!! 😆

sorry

why 🙄

🙄🤔

hi 🌹 I'm late for reply 🫣 thanks 🌹 🌹 🌹

good 😊 🌹

🌹

🌹

👍👍👍

yes 👍 thanks for watching

🫤

why are you laughing 🙄

I'm glad you paid attention to this.😊🌹🌹🌹

@@techshowmobile no problem bro someone had to say it and it's the least for us follower to be thankful, especially with content creator like u that care about his community, love from Italy 😄💚🤍❤️

thanks for watching 🌹

Да ты прав в жопе мира.😢

@@iljan17 hi 🙄

thanks man 😭

This is the electronic world. 🙄

🤔

it's very good 👍 🌹

Flux helps the heat spread easily on the board and also protects them from heat ,Another function of flux is this

🤔🤔🤔

🤔🙄

thanks 🌹 I'm late for reply 🫣

👍

yes 🫣

thanks for watching 🌹 🌹 🌹

amtech flux rma-223

🌹