Thank you very much

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Thank you very much.

Thank you very much.

Thank you very much

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Thank you very much, you are right, the work took about two months and 120gb of video. Thanks for watching

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Thank you very much.

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Thanks

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Thank you very much

Thank you so much for commenting and watching

Спасибо!

👍👍👍 отдуши

Yorumunuz ve görüntülemeniz için çok teşekkür ederiz.

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Thanks

Muchas gracias. Mientras que la acústica es mi hobby. El precio de esta columna por componentes es de unos 250 dólares, sin contar el trabajo y el tiempo invertido.

@@DIYAcoustic me lo imaginaba compañero.....muchísimas gracias por todo......cuídese x favor.....desde donde me escribe?????.....Bendiciones para

Soy de Rusia

Thank you very much!

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Thanks

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Спасибо большое

2 midrange connect consistently, tweeter in opposite phase.

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

I didn't quite understand your question

Thanks 👍

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Thanks

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Thanks

Bossing hm that

Thanks

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

I don’t remember the exact data on current consumption, from about 200mah to 1A., It’s just that for a small room, 30% volume is enough completely. The column worked for about 9 hours without problems with a volume of 60-70%. At a maximum voltage of 25.2v, the amplifier worked without problems, you can use a 24v charger and your battery above will not be charged. The best solution would be to use a DC-DC converter, for example you can make a 3S, 4S, 5S battery and raise it to the required 24v. and you will not have a drawdown in power with a battery discharge.

@@DIYAcoustic what a champion response, thanks heaps man.

Thanks. The main components are listed in the description. All speakers used from Microlab H600 audio system.

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Diy speaker ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

hello, I used a regular crossover from microlab h600 acoustics, I didn’t measure its exact characteristics, since the acoustics sounded great. Frequencies are cut from approximately 280hz to 7000hz for the midrange speakers, the rest of the frequencies are played by tweeter. the only caveat, the midrange speakers are connected in series, and the tweeter is in antiphase. In any case, purchasing a ready-made crossover separately is not very good, you need to take measurements of all the speakers.

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Thanks

No entendí tu pregunta debido al traductor, pero si preguntaste sobre los parlantes, este es el conjunto completo del sistema de audio microlab H600.

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

in my assembly the components are suitable for the power of the amplifier and the amplifier itself is powered by a 6s 24v assembly. If your speakers have a rated power lower than the amplifier, then you will have to: 1) use an external sound source module, bt, usb, etc. but with volume control. 2) if there is Bluetooth on the board, then use 2 variable resistors in series, 1 will be a volume limiter, 2 will be external to control the main volume.

​@@DIYAcousticThanks so much for ths reply. I fixed the issue with an audio-potentiometer connected to aux input. Im a big fan btw. 😊

Спасибо

The recording volume was low so that there was no overload for the microphone.

@@DIYAcoustic yes i understand But need excursion from the subs

Write in more detail, I did not quite understand because of the translator.

@@DIYAcoustic any way This woofer needs something to be great 👍

Added links to the main components in the description, speakers from microlab 5.1 H600

X

@@josepcaralt7803 y

Thanks

Thanks 👍

Thanks

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

👍👍👍

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Спасибо

Большое спасибо

8 inch

The dimensions of the case were designed individually for the acoustics of the microlab H600, measurements of the parameters of the low-frequency speaker, setting the phase inverter port. My measurements won't fit your speakers. The main components are in the description.

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Najpierw mierzone są parametry głośnika til-małego, robię to za pomocą dodatkowej masy. Następnie obliczasz projekt obudowy, wymiary, ustawienie portu, jeśli falownik fazowy. W Internecie jest wiele formuł i informacji. Mam nadzieję, że tłumacz wszystko przetłumaczył poprawnie.

@@DIYAcoustic przetłumaczył dobrze, dzięki za odpowiedź. Chociaż dalej mało wiem na ten temat 😉

Everything is simple, the source is a 6s battery, a 25V charger, 24V is supplied to the amplifier, about 16V goes to the panel backlight through a step-down converter.

စန်နုစ်စ်

Thanks

ukposts.info/have/v-deo/fZ-BgqebfWuk2o0.html

Thank you

Весь комплект динамиков из microlab H600, достойная акустика была (не в счет аудиофилов). По аккумулятору, ну это все по желанию, вы же понимаете, что с такой отделкой и размером не предполагается ее носить по улицам и тд. для домашнего использования более чем достаточно. По ручкам, я не люблю их, портят вид, личное мнение. Можно делать конечно в стенках, но опять же жертвуя внутр. объемом, особенно если это колонка поменьше.

@@DIYAcoustic хочу добавить.Ручку можно сделать из кожи и смотреться будет четко.На улицу носить, разве что малолетки не смогут,тяжело,а так в машину закинул и поехал.Допустим на рыбалку,в лес ,дачу речку. Знаете же,что 3116д2,саб выход даёт 100вт,только при подключении в 2ом?При 4ом-50вт настоящих,не рмс,это при 24вольтах,а при 12вольтах,то вообще печаль-10вт.Некоторые лепят в сборку 12вольт и пук,пук.😁

@@user-zv3cf9ns5sпо даташиту она не работает с 2Ом, 50w на канал, 1 чип работает в мостовом режиме, вот и получается 100w при 24в.

Именно готовой колонки или комплектующих (динамиков)?

The price will be about $500-550, including shipping about $250.

exactly what connection?

@@DIYAcoustic this speaker conection diagram

The mid-range speakers are connected in series through the crossover, the tweeter is in antiphase. subwoofer directly to the amplifier.

subwoofer does not move

recording was made at low volume, and the camera angle in front of the speaker

Здравствуйте, можете написать на почту f1.4laser@gmail.com

Просто запись видео была сделана на очень низкой громкости, еще зависит от самого трека, к сожалению не возможно использовать хорошие треки.

@@DIYAcoustic а что за НЧ динамик и откуда взят?

Динамики от аудиосистемы Microlab h600.

~250$ for all components

recording was made at low volume, and the camera angle in front of the speaker

Уже продана, колонка собиралась в 1 экземпляре.

This is the maximum total power of 3 channels at a voltage of 24v, the column operates at this voltage. Power corresponds to the declared.

Вы можете написать свою почту, я вам отправлю файлы проекта. Но для каждых динамиков нужно делать расчет индивидуальный.

@@DIYAcoustic здравствуйте как купить колонку

HI, because the volume of the speaker during the demonstration was low, so that there was no distortion when recording video.

it’s called a sealed system and it’s supposed to give punchy bass.

​@@gliderman9302 i think he meant to say about the amplifier it'll overheat💀

Hi, I think class D is lightweight and efficiency is better than class AB. Im using class A pre amp with class D amp and sound is not so "unorganic"

It’s better for you to assemble a Bluetooth speaker or buy it yourself in your region, it will be much cheaper. I sell my finished projects only in my region.

Hello, acoustics cost about $ 270. It is heavy, and I'm afraid it will not be profitable with delivery. Can I add to the column, I didn’t understand what exactly because of the translator, sorry, you can drop the link or write in more detail

@@DIYAcoustic I am from India. It is 230 volts here with 50Hz frequency, I love your design. I wish to buy this model with Bluetooth and Wifi. Can be with a suitable attery adaptor getting power from 230v AC source.

There are no problems with voltage, we have the same thing in Russia. The problem is delivery, from Russia to India, the cost of shipping acoustics of the same size and weight is $ 290, which is very expensive. And so you can make acoustics according to your needs, using, for example, the Arylic amplifier from AliExpress.

@@DIYAcoustic доброе утро. большое спасибо мой дорогой товарищ