I'm sorry for the late reply. It works like ukposts.info/have/v-deo/r3-XiHqvgGeCtnU.html I'll make a demo video

thanks for replying

How it works : ukposts.info/have/v-deo/imaAhHyNZ6tzsHU.html

@@MakerTutor101 is there any alternative?

Please contact number Price kiti ahe

hey you should check yourlcd

He made a switch circuit on his own. You know, coins are great conductors. So when a coin slides down and touches the aluminium part, the circuit is closed, otherwise the circuit is open. You can utilise this as 0/1 signals.

Thanks for watching : ----> goo.gl/YBer4q How it works : ukposts.info/have/v-deo/imaAhHyNZ6tzsHU.html

ay hahaha thanks sir/maam :)

github.com/makertut/coinsorting

Yeah...It's not working for me too....

For me also

hie did you get the code

Thank you so much it's very simple and good project

ahhhhhhhh thanks :D

Did u get the code?

I used to have a working one I will check monday if I still have it

@@nathanbruggeman3161 found it? I really need to finish this project

@@Valentina-zm7gr I got one but I don't know if I still have it I will check it when I can

@@Valentina-zm7gr #include #include #include #include #include LiquidCrystal_I2C lcd(0x3F, 16, 2); CapacitiveSensor capSensor = CapacitiveSensor(4, 2); CapacitiveSensor capSensor2 = CapacitiveSensor(4, 5); CapacitiveSensor capSensor5 = CapacitiveSensor(4, 6); CapacitiveSensor capSensor10 = CapacitiveSensor(4, 7); int ms_time = 800; int threshold = 640; const int ledPin = 13; bool led_state = LOW; bool pass = false; int count_c1 = 0; int count_c2 = 0; int count_c5 = 0; int count_c10 = 0; int sum = 0; unsigned long ms1 = 0; unsigned long ms2 = 0; unsigned long ms5 = 0; unsigned long ms10 = 0; void setup() { lcd.init(); // initialize the lcd // Print a message to the LCD. lcd.backlight(); lcd.setCursor(0, 0); lcd.print("1 2 5 10 sum"); Serial.begin(9600); pinMode(ledPin, OUTPUT); delay(50); } void loop() { checkCoin1(); checkCoin2(); checkCoin5(); checkCoin10(); lcd.setCursor(0, 1); lcd.print( count_c1); lcd.setCursor(3, 1); lcd.print( count_c2); lcd.setCursor(6, 1); lcd.print( count_c5); lcd.setCursor(9, 1); lcd.print( count_c10); lcd.setCursor(13, 1); lcd.print( sum); } void checkCoin1() { long sensorValue = capSensor.capacitiveSensor(30); Serial.println(sensorValue); if (sensorValue > threshold) { if ( ms1 == 0) { ms1 = millis(); count_c1++; sum = sum + 1; } digitalWrite(ledPin, HIGH); } else { digitalWrite(ledPin, LOW); } if ( ms1 != 0) { if ( (millis() - ms1) > ms_time) { ms1 = 0; } } } void checkCoin2() { long sensorValue = capSensor2.capacitiveSensor(30); Serial.println(sensorValue); if (sensorValue > threshold) { if ( ms2 == 0) { ms2 = millis(); count_c2++; sum = sum + 2; } digitalWrite(ledPin, HIGH); } else { digitalWrite(ledPin, LOW); } if ( ms2 != 0) { if ( (millis() - ms2) > ms_time) { ms2 = 0; } } } void checkCoin5() { long sensorValue = capSensor5.capacitiveSensor(30); Serial.println(sensorValue); if (sensorValue > threshold) { if ( ms5 == 0) { ms5 = millis(); count_c5++; sum = sum + 5; } digitalWrite(ledPin, HIGH); } else { digitalWrite(ledPin, LOW); } if ( ms5 != 0) { if ( (millis() - ms5) > ms_time) { ms5 = 0; } } } void checkCoin10() { long sensorValue = capSensor10.capacitiveSensor(30); Serial.println(sensorValue); if (sensorValue > threshold) { if ( ms10 == 0) { ms10 = millis(); count_c10++; sum = sum + 10; } digitalWrite(ledPin, HIGH); } else { digitalWrite(ledPin, LOW); } if ( ms10 != 0) { if ( (millis() - ms10) > ms_time) { ms10 = 0; } } } Thats all I still found, I know for a fact that there is somewhere a fault in this sketch but I hope I helped you a little bit futher!

เทปสำหรับปะหม้อที่มัน รั่วครับ

The link doesnt work anymore

github.com/makertut/coinsorting

THANK YOUUUU YOU SAVED OUR SCHOOL PROJECT

@@johnjosephdejesus8524 How did u make it work?