DIY Galaxy Resin Keycaps | Mechanical Keyboards
Переглядів 66,190
3 роки томуI think I've found a new addiction! These galaxy themed keycaps came out so pretty and I'm very pleased with the result.
Let me know what you think!
--
Silicone Keycaps Mold: amzn.to/2ZZuo3a
Holographic Glitter: amzn.to/3kyGcCA
Galaxy Charms: amzn.to/3uFWrmc
Silicone Measuring Cup Set: amzn.to/2N2rpDR
UV LED Light: amzn.to/36ODxiQ
UV Resin: amzn.to/2MLqcRt
Resin Pigment: amzn.to/2O7Ktko
XL Silicone Mat: amzn.to/2YXmYws
--
Opening Background Music: Chocolate (Prod. by Lukrembo)
--
Video Equipment:
Camera (Sony ZV-1): amzn.to/3ilTf9A
Memory Card: amzn.to/2Lvery1
Camera Cage: amzn.to/3nSRkdA
Camera Support Grip: amzn.to/35Qt5qy
Camera Stand: amzn.to/3szDtMO
USB C Charger: amzn.to/3oQ8g5S
Camera Microphone: amzn.to/39DBzSW
Camera Mic Cable: amzn.to/2LV5j5F
Ring Light with Stand: amzn.to/3nOZZxW
@Nayutaaa_ 3 роки тому
hey there! im an artisan keycap maker and from my experience, curing clear resin (your second step - filling up the bottom) only require a very short amount of time (until its not tacky), or else it could shrink and lead to leakage to the front! save the long curing to the very last!
@SerendipityChannel91 3 роки тому
Oh wow that’s really helpful! Thank you so much!
@Stavros_Odyssey 2 роки тому
Thank you for this tip! 🤩
@honeysal 3 роки тому
I can't explain how happy it makes me to see a quality video without any dislikes. My soul cries tears of joy :')
@SerendipityChannel91 3 роки тому
Aw, thank you! I've come across videos where I can't understand how there's a dislike bar lol
@imsorryforarguingbut4555 3 роки тому
There’s 2 dislikes 🥲
@SerendipityChannel91 3 роки тому
@@imsorryforarguingbut4555 oh nooo 😭
@Rabbitmancer 3 роки тому
I've never resined before (always wanted to though!) but going down the mechanical keyboard rabbithole has lead me to believe now is as good a time as any to try it, and not just because I'm thoroughly addicted to custom keycaps. This video is such a great way to see the process. Thank you so much!
@SerendipityChannel91 3 роки тому
Thank you for watching! Yeah, this has actually led me to want to try to make a lot more custom keycaps and I'm hoping to make an entire set one day :D
@adamking7326 6 місяців тому
Greetings from another freshly mechanical keyboard rabbitholer turned resin keycap maker 🤝🍻
@gemi938 3 роки тому
These look so fun. Rocket ship Keycap is my favorite!
@SerendipityChannel91 3 роки тому
Thank you! Yeah the rocket ship is definitely my favorite, too!
@TimManuelMiranda 3 роки тому
Amazing, top-tier content! quick and to the point and beautiful results!
@SerendipityChannel91 3 роки тому
Thank you so much! :D
@sudokillme 3 роки тому
Adding the glitter was a good choice. Looks neat :)
@SerendipityChannel91 3 роки тому
Thank you! :)
@astroclicks3036 3 роки тому
another great tutorial! thank you, was looking for something like this.
@SerendipityChannel91 3 роки тому
Thank you so much! :D
@sanghlee4514 3 роки тому
They're so pretty!
@SerendipityChannel91 3 роки тому
Thank you! :D
@mrb-btw 3 роки тому
wow these came out so good
@SerendipityChannel91 3 роки тому
Thank you! :D
@mcheddadi 3 роки тому
always here for the keeb content. nice work!
@SerendipityChannel91 3 роки тому
Thank you! :)
@alcrafts6318 2 роки тому
amazing vid, helped me a lot, currently ordered the resin, uv light, pigment and silicone keycaps, thanks for the help
@SerendipityChannel91 2 роки тому
That's awesome, good luck with your project :D Let me know how it goes!
@AndyQuang Рік тому
Can you be so kind to provide a part list and where you buy them from?
@sunny07494 3 роки тому
Omfg thank you u this was a so short and simple🙏💕 tutorial thank you very great content
@SerendipityChannel91 3 роки тому
Thank you so much! I definitely want to keep making custom keycaps, they’re so much fun 😄
@kiamchyeZ 3 роки тому
Great stuff !
@SerendipityChannel91 3 роки тому
Thank you! :D
@hollaartyourboy 4 місяці тому
this is so cool! thanks for sharing
@SerendipityChannel91 4 місяці тому
Thank you so much! 😄
@chann_dev 3 роки тому
Thank you for sharing
@SerendipityChannel91 3 роки тому
You’re welcome 😊
@cookieemonster7723 2 роки тому
Love it !
@SerendipityChannel91 2 роки тому
Thank you! ☺️
@PCConcepts 3 роки тому
Those look amazing!!!
@SerendipityChannel91 3 роки тому
Thank you so much! :D
@user-yf2tf2jr9m 11 місяців тому
NICE!!!!
@SerendipityChannel91 11 місяців тому
Thank you! 😁
@aleksdeveloper698 2 роки тому
Crazy good. Just anyone watching this, please for the love of God, wear protective gloves and mask when working with resin.
@SerendipityChannel91 2 роки тому
Thank you so much! Also, yes, that’s super important! And make sure you’re in a well-ventilated area 😷
@benaliaa 3 роки тому
Thats a nice tutorial, straight to the point regarding everythin!! Compliments! :) Do you have any advise how I should google such tiny star, spaceship or any other kind of figures?
@SerendipityChannel91 3 роки тому
Thank you so much! Here are the charms that I used in the video: amzn.to/3uFWrmc I have everything else linked above in the description :)
@imprial 2 роки тому
I want these lol
@SerendipityChannel91 2 роки тому
Maybe I'll do a giveaway for my subscribers in the future! :)
@vantilsley8633 2 роки тому
Earned a sub
@SerendipityChannel91 2 роки тому
Thank you so much!
@TheStitchWitchPodcast 2 роки тому
those huge gold pieces are AMAZING! also did you find that some silicone keycap molds work better than others? I keep hearing that some of them are good and others are really hard to align properly
@SerendipityChannel91 2 роки тому
Thank you! 😄 The molds I used for this video have the backings all attached together so they’re absolutely easier to align compared to other ones.
@riol3298 3 роки тому
I want to make resin keycaps too! You did a great job on them :) I've heard of UV resin spacebar warping as they cure though. Any tips and advice? It'll be my first time using UV resin. Also, how long did you cure them for total?
@SerendipityChannel91 3 роки тому
Thank you! Yes, UV resin does warp as it cures; it's mostly to do with the heat from the lamp paired with the silicone. I'm still trying to figure out myself how to make it so that the mold stays still during the curing process.
@riol3298 3 роки тому
Thanks for replying! Im really excited for my resins to arrive :)) I'll give it a try and let you know if I find a way to stop it from warping hahaha
@ashleechan22 2 роки тому
That's amazing! But are all keys the same size? How do you get a mold that matches the keyboard
@SerendipityChannel91 2 роки тому
Thank you! The silicone mold I'm using is the OEM keycap profile :) It's compatible with all mechanical keyboards that use Cherry MX switches/clones. Hope that helps!
@mamofns4642 9 місяців тому
Hello!! I found your video and it helped me a lot to make some keycap. But i have a question. ¿What is the heat-gun that you used in the video?🥺
@SerendipityChannel91 9 місяців тому
That’s awesome, I’m so glad this helped! I actually used a butane lighter to get rid of the air bubbles 😁
@gamerschannelnews 3 роки тому
What are the golden objects in the keycaps called? Your work is fantastic!
@idahagglund524 3 роки тому
I'm pretty certain those are nail art 3D "stickers". Tiny little decorations in thin plastic, cheap as dirt.
@gamerschannelnews 3 роки тому
@@idahagglund524 Thank you for your help 😬
@SerendipityChannel91 3 роки тому
Here's what they are: amzn.to/3uFWrmc I have everything else linked above in the description :)
@idahagglund524 3 роки тому
Ooh, now that I see them in the image, I realize they're quite larger than nail stickers. (n_n;)
@knochenherzgacha6042 Рік тому
Heyyyy can I maybe ask what resin you use? The caps Look amazing!
@SerendipityChannel91 Рік тому
Hi! Thank you so much! I used UV resin 😊 It’s so fun and so easy to use
@BoBreiner22 2 роки тому
Excelente video, se necesita alguna protección para utilizar la resina con respecto al olor? es muy toxico el olor lo utilizare en un hogar muy pequeño y esposa embarazada no quisiera algún problema de salud?
@SerendipityChannel91 2 роки тому
Cuando esté trabajando en él, trabaje en un área abierta con mucha ventilación. Una vez que la resina se solidifica, el olor debería desaparecer.
@A_ldo.. 2 роки тому
Should i use epoxy resin or do i have to use the one that you put uv light on?
@SerendipityChannel91 2 роки тому
You could use epoxy resin if you want! It'll just take a bit longer to finish them because UV resin is more instant when it comes to curing.
@ArchNephalym 2 роки тому
Stumbled on your channel recently, and was wondering what would happen if you use EPOXY resin, instead of UV Resin for this? Will it destroy or mess up the Epoxy resin when exposed to UV Light?
@SerendipityChannel91 2 роки тому
Putting epoxy resin under UV light actually would make it yellow :( Also, the resin won’t react the way UV resin does. You could still use epoxy resin if you want to, it’s just gonna take longer to cure.
@colinhendry6116 3 роки тому
That seemed so easy! And question, is it possible to put varying colors after each layer the resin is set, or would putting too many varying shades create a muddled color? I'm wondering if there could be a well-defined color gradient by using this fast setting UV resin and some patience, and if so I know what I'm getting myself this xmas lol
@SerendipityChannel91 3 роки тому
I haven't tried that method myself but that sounds cool! I might have to give that a go and see how it turns out :D I think because it's easier to set and cure it with a UV light, you can get a more defined gradient.
@EzlNh8u 2 роки тому
I purchased everything you have in this video. And followed each step, but am noticing when I pull them out from the mold, the back comes off and the middle is still a bit wet. I tried a second.time with more.time under the UV light and same result, still wet when I pull out from the mold. Maybe I used.to many color drops in my. Mix?
@SerendipityChannel91 2 роки тому
Yeah, if you add too many color drops, it can get soft. Also, if you use darker colors, it takes a bit longer to fully cure since it’s harder for the UV light to pass all the way through and solidify right away. I’d suggest starting off by using less pigment and see how that goes :) Good luck and let me know if that works!
@neins Рік тому
May you tell about the condition of these keycaps now? i am interested how is UV resin stronger for rubbing resitance than epoxy if use them daily
@SerendipityChannel91 Рік тому
Hey! What I see is that they've been holding up pretty well since making them. I don't see any yellowing or major scratches. Hope that helps!
@shirleygodina3861 9 місяців тому
What keyboard do you recommended for these keys can you add a link for amazon or something
@SerendipityChannel91 9 місяців тому
Any mechanical keyboard that uses Cherry MX switches or Cherry MX clones would work just fine, it doesn’t have to be anything fancy! Here’s a good cost-efficient example: amzn.to/3QEAYHV Hope that helps!
@Someoneoncesaid94 9 місяців тому
can you put a link to the uv resin that you use? also the light?
@SerendipityChannel91 9 місяців тому
Hi! I have both the resin and the light linked in the description 😊
@Zillaney 2 роки тому
Hiii. I'm trying to make my own resin keycaps, but i don't understand why my resin still sticky in the outside even though i cured it for long time. Any suggestion?? :( I wonder if it was the quality of the resin that i use or what. Thankyouuu
@SerendipityChannel91 2 роки тому
Hi! Did you use UV resin like I did, or did you use epoxy resin? Epoxy resin usually takes about 72 hours to cure if that's what you used. On the other hand, UV resin should cure much faster especially in sunlight. Also using a lot of pigment could affect how long it takes to cure. Hope that helps! :)
@kristinetamayo4353 2 роки тому
Hello! Any remedy for a sticky resin keycap? I bought it from an online store and I'm too nice to complain lol 😬
@SerendipityChannel91 2 роки тому
Hi! Usually the only way to fix sticky resin is recoating it with a thin layer of properly mixed resin. If you’d rather not do all of that, then maybe you should request an exchange for a new keycap :( Hope that helps!
@kristinetamayo4353 2 роки тому
@@SerendipityChannel91 I see. Thank you so much! 💓
@Rox2506 Рік тому
Hi! Why is the curing method necessary?
@SerendipityChannel91 Рік тому
Hi, so sorry for the late reply! It’s to ensure that the keycaps do not leave a sticky residue and so that resin with darker pigments can cure fully :)
@TariqYasiinProd 2 роки тому
They sound better than plastic
@SerendipityChannel91 2 роки тому
Thank you! I was pleasantly surprised at how they sounded in the end 😄
@suspectshot2199 3 роки тому
How does yours cure so quick. I’ve had it under the light for 5 minutes and it’s still incredibly runny
@SerendipityChannel91 3 роки тому
Oh no, did you add too much pigment? 🙁
@suspectshot2199 3 роки тому
@@SerendipityChannel91 I haven’t added any yet. It’s just resin and hardener
@SerendipityChannel91 3 роки тому
@@suspectshot2199 hmm are you using regular resin, or UV resin?
@suspectshot2199 3 роки тому
@@SerendipityChannel91 most likely regular. Do you have a UV brand you could recommend?
@SerendipityChannel91 3 роки тому
I do! This is the brand I use: amzn.to/2MLqcRt I have everything that I used listed in the video description as well. You could use regular resin but it does take longer to cure. I highly recommend UV resin for keycap designs like this. Good luck with your project! :)
@beeiu. 2 роки тому
Any news on how to make the spacebar work yet? 🥺
@SerendipityChannel91 2 роки тому
The only problem for me was the piece warping and if I use regular resin, then it would fix that. It just takes longer :)
@ophelia2595 Рік тому
@@SerendipityChannel91 How do we use regular resin?? Also under the UV light? Because in the comments I’m reading you have to wait for a day. But also people talk about hardener and everything it seems complicated. Isn’t it just one bottle just like yours in the video? Do you mind making a video on the spacebar again?
@suspectshot2199 2 роки тому
what paint do you use?
@SerendipityChannel91 2 роки тому
I used epoxy resin pigment which you can find here: amzn.to/2O7Ktko Hope that helps!
@KabutoRyu 3 роки тому
A woman, unlike other women, has mechanical keyboard as her hobby, more than that she makes new keycaps on camera. a rare and creative type of woman Beware of mechanical keyboard rabbit holes
@SerendipityChannel91 3 роки тому
Oh believe me, I have some pretty big ideas for custom keycaps that I'll be showing eventually! :D
@josonp6623 2 роки тому
what resin are you using
@SerendipityChannel91 2 роки тому
I'm using UV resin that you can find here: amzn.to/2MLqcRt
@josonp6623 2 роки тому
@@SerendipityChannel91 thank you so much 😃
@dunkplays9797 2 роки тому
I cured mine after putting the back mold for 6 minutes. The resin is still soft. I don't know what I did wrong. I used an Epoxy resin and Hardender (this is a single bottle) I supposed it is a resin combined with a hardener? But I'm really confused why it didn't hardened. Please help.
@SerendipityChannel91 2 роки тому
Oh, epoxy resin usually takes a day or two to fully cure. Even with a hardener, I would still allow it to sit for at least 24 hours.
@dunkplays9797 2 роки тому
@@SerendipityChannel91 Thank you for noticing my comment! This is noted! So, I found out that I was missing an ingredient for it which is the hardener. But, thank you for this info! Would it still be a problem if you use it within a day? or are you just curing it for a day to make it safe?
@SerendipityChannel91 2 роки тому
@@dunkplays9797 I would cure it for a day to be on the safe side, especially if you use darker ink pigments since those tend to take a bit longer :)
@dunkplays9797 2 роки тому
@@SerendipityChannel91 I see! So, it kind of depends also with what color you used. What if I'm only using the clear epoxy resin? Should it still be cured for a single day?
@SerendipityChannel91 2 роки тому
@@dunkplays9797 with clear epoxy resin, I would say you’d still want to wait 24 hours. If you use any pigments, more than 24 hours just to be safe - depends on how much pigment you use. Hope that helps!
@Omega-EP Місяць тому
I love how everybody in the keyboard spaces loves to use the "wow" effect in their videos, but have no idea where it comes from. I saw the source material before it became a trend and I'm telling you, I'm so sick of that sound effect by now, lol.
@SerendipityChannel91 Місяць тому
Yeah, I agree lol But it’s so effective 🤣
@Omega-EP Місяць тому
@@SerendipityChannel91 I suppose it is 😫
CoolRiceBunnies
Переглядів 37 тис.
Fabiosa Best Lifehacks
Переглядів 30 млн
Ty Cottle
Переглядів 616 тис.
Tokparty
Переглядів 2,7 млн
Ветерани космічних військ
Переглядів 192 тис.