Thank you for joining me on my channel!
This time I'll show you how I made a traditional vegetable knife - a Nakri.
The steel called Nitro V was used for the knife blade. Nitro-V steel is a high carbon stainless with the addition of nitrogen and vanadium.
The video also shows the hardening, quenching, freezing treatment and tempering of this martensitic steel.
For the handle I used olive wood and brass.
The wood is glued on and additionally fixed with brass pins.
The blade is 165mm long, 2.75mm thick and has been given a hammered, unique look.
I'm really looking forward to your visit and see you next time!
Don't forget to like and subscribe.
Technical data:
Steel: Nitro V (NJSB New Jersey Steel Baron)
Total length: 320mm
Handle length: 155mm
Blade length: 165mm
Blade thickness: 2.75mm
Blade width: 54mm
Weight: 380g
Handle: Olive wood with brass pins
Ornament: Brass (riveted)
Advertising - tools (used/similar):
* amzn.to/4cjrM3O straight grinder
* amzn.to/3Viimjd carbide cutter
* amzn.to/3RFBB2u Angle grinder
* amzn.to/48wMVoE Cordless screwdriver
* amzn.to/3NGZ8iw HSS-E drill
* amzn.to/48u46ak Countersink HSS-E
* amzn.to/4axO9BQ Belt sander
* amzn.to/474Tg9W Sanding belt
* amzn.to/48yjNxm DeWalt panel saw
* amzn.to/3GVxWsu Bench drill stand
Advertising - material (used/similar):
* amzn.to/3GlEGQb Brass 25x8mm
* amzn.to/3Gjwujd Brass Round
* By purchasing via the Amazon link, you support my channel at no additional cost to you (affiliate link). The products are suggestions.
Video Chapter:
***************
00:00 - Intro
00:25 - Blade gets a hammered look
00:47 - Drilling holes for brass pins
01:11 - Cutting the outlines
04:10 - Grinding and filing
06:15 - Heattreatment
06:55 - Quenched by air
07:33 - Cryo and Tempering
07:58 - Hardness test
11:27 - Brass elements
13:11 - Rivet brass elements
15:34 - Glue on the wooden handle
19:47 - Grind the handle
21:34 - Brass pins on handle
22:38 - Sharpening
23:47 - First cut
23:57 - Outro cutting vegetables
In this video I used the following music, endcard and clips. Many thanks to the creators!
Music:
*******
Believe (Instrumental) - NEFFEX
Whatdafunk - Audionautix
Heavy Hunter - Audionautix
Heading West - Audionautix
Something You Could Never Own (Instrumental) - NEFFEX
Motocross - Topher Mohr and Alex Elena
Take it Back - Dan Lebowitz
News Room News - Spence
Ishikari Lore - Kevin MacLeod
Whatdafunk von Audionautix unterliegt der Lizenz Creative-Commons-Lizenz "Namensnennung 4.0". creativecommons.org/licenses/...
Heavy Hunter von Audionautix unterliegt der Lizenz Creative-Commons-Lizenz "Namensnennung 4.0". creativecommons.org/licenses/...
Heading West von Audionautix unterliegt der Lizenz Creative-Commons-Lizenz "Namensnennung 4.0". creativecommons.org/licenses/...
Künstler: audionautix.com/
Ishikari Lore von Kevin MacLeod unterliegt der Lizenz Creative-Commons-Lizenz "Namensnennung 4.0". creativecommons.org/licenses/...
Quelle: incompetech.com/music/royalty-...
Künstler: incompetech.com/
Endcard:
*********
youtube-25102.mp4 - StreamRender
Clips:
*****
button-subscribe-112699.mp4 YRDesigns
subscribe_-_50759.mp4 Mohamed_hassan
DISCLAIMER:
The information provided on this channel is for entertainment purposes only. Always wear the appropriate safety clothing and follow the instructions for the respective machines. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and "Stahl und Rauch" will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Any attempt to reproduce the actions or projects suggested by this channel should not be made without training and is done at your own risk.