DIY Raspberry Pi Racecar Dashboard: The Ultimate Guide
Переглядів 690,883
День томуI've built dash clusters based off the Raspberry Pi before, but here's the latest full guide with all my tweaks to building a FAST booting PI.
⇊ More ⇊
CHAPTERS:
0:00 Introduction
0:22 Parts Required
1:46 Download OS Image
2:35 Write SD Card
4:04 Boot Up Pi
4:52 Update Pi Software
9:05 USB Drive Copy Files
10:22 TunerStudio Setup
11:34 Physical Assembly
13:02 Boot Up Time
14:06 Thanks for watching!
**FAQs**
How does it connect to the ecu? - Via USB connection from the Megasquirt MS3 ECU direct to the RasPi.
Will this work for an ECU with OBD2, or some other aftermarket ECU? - Sorry, I have never tried this for anything other than the Megasquirt ECU... so instead you can check out a product called 'OpenAuto': bluewavestudio.io/shop/openau...
Or consider trying this software instead: OneGauge, theonegauge.com
**LINKS**
BEAVIS RASPI DASH DOWNLOAD PACK:
www.beavismotorsport.com/Rasp...
DIETPI DASH OS IMAGE:
www.bartonekdragracing.com/en...
Or direct download: mega.nz/file/nwoljKBb#fBsvarF...
DIETPI DASH OS Update video:
• PiDash by AB update to...
DIETPI OS:
dietpi.com/
BALENA ETCHER SD CARD IMAGE TOOL:
www.balena.io/etcher
MY OLD DISPLAY:
www.aliexpress.com/item/40001...
MY CURRENT DISPLAY:
www.aliexpress.com/item/40011...
PREVIOUS RASPBERRY PI VIDEO:
• GUIDE: BUILD A RASPBER...
RASPBERRY PI VIDEO PLAYLIST:
• Raspberry Pi
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
►My 2nd Channel:
/ @techbeaver
► SUPPORT ME
JOIN the channel: ukposts.infojoin
SHOUT me a Tip: streamlabs.com/bbeavis/tip
SUPPORT me on Patron: / beavismotorsport
► MORE INFO
Subscribe: bit.ly/Sub2BEAVIS
Join Discord Server: / discord
BEAVIS MS: www.beavismotorsport.com/links/
My Sim Rig: bit.ly/BeavisSimRacing
Facebook: / beavismx5
Instagram: / beavismotorsport
Some videos contain music by audionautix.com
@jarentimmer9226 Рік тому
Years ago, building my first turbo miata, I found your channel and you had the exact videos I needed at the time! Today I'm here because I bought a 7" and 10" touch screen to build a pi dash for this season and low and behold the perfect video pops up aging from you! Thanks you for the forever great content 🤘
@Bbeavis Рік тому
Awesome! Thank you for the kind words of appreciation Jaren, glad I could help - again!
@evanwatling3897 5 місяців тому
First?
@josesanabria6414 Рік тому
Am I the only one impressed that he’s still using Netscape? great job on the video by the way. 😅
@Bbeavis Рік тому
I swear Netscape Navigator peaked in the mid 90's.... what a time to be alive.
@Dave102693 Рік тому
I wish it was still around
@razif6916 Рік тому
Lol
@saidjohan2266 Рік тому
Not "still using", check the URL just "about" while 'clicked' 🤭
@michaelkillerman Рік тому
He couldnt escape from it
@illuminaticorp.1958 5 місяців тому
Crazy to see how people figure all this out and build it themselfes. Gets me very motivated
@Bbeavis 5 місяців тому
Thank you.
@richbonnau5807 Рік тому
love the idea, simple enough, and looks useful for those of us needing a new dashboard where either a new one is too expensive or in my case nonexistent for my project. Thanks for the set-up idea!!
@Bbeavis Рік тому
Glad you like it Rich!
@ROT8TN Рік тому
Hands down for your build! Everything you do has a purpose and you give us all that Info for free, you are absolutely killing it!
@Bbeavis Рік тому
Thank you Felix, you are too kind.
@davidallen5783 Рік тому
This is really awesome. You might think about modifying your shutdown script to take advantage of a relay instead. Connect the relay to your 12v + and - so it detects when the car is on. When you turn the car off it would then close the relay invoking the clean shut down sequence.
@Bbeavis Рік тому
I have considered it, and definitely that would make sense for some people/cars, but for my purposes i like the simplicity and control i have with the current setup.
@davidelliott5843 11 місяців тому
With a race car, you won’t want to wait 30 or 40 seconds every time you’ve switched off the ignition. My Fiat ignition switch goes from zero to start no problem. But just switch on but don’t start and you have to switch it off & on to start the engine. A Pi dash would need its own switch. Or maybe a relay connection with the door locking.
@caspersmith7112 11 місяців тому
basicly acts like a sense pin (looking fo acc. min.) for key turn i take it?
@douglasverkaik4662 6 місяців тому
Dude, this is amazing! I have looked into this many times before and always turned away because the results looked unpolished, but this is clear, concise and polished. Thank you so much for sharing!
@Bbeavis 6 місяців тому
Glad I could help!
@unggoy8564 Рік тому
Got mine up and running last night! Just wanna say thanks for making this video. My oem dashboard just shorted out and almost caught fire due to a design flaw in BMW's Rxd diagnostic bus wire. I had a 7 inch screen and a pi 4 laying around for another project so setting this up was the perfect solution. I downloaded some of your dashboard designs too, great work!
@Bbeavis Рік тому
Great to hear!
@captainjacksnap Рік тому
I’m researching making a pie based dash for my ski boat and this is great help to show how the basics work
@Bbeavis Рік тому
Thanks, good luck with your build Jack!
@EricFritz-emf Рік тому
A nice bundled answer - I’ve had similar luck using ASL’s solutions with my AIM and standalone data loggers in RR cars. You’ve got a great build, thumbs up x100.
@Bbeavis Рік тому
Thanks very much Eric.
@mrcgarage8687 4 місяці тому
I've wanted to do this for years but was unclear on a few things. You cleared up so much, thank you for a great video!
@Bbeavis 4 місяці тому
Glad it was helpful!
@dapoopy3012 5 місяців тому
Thank you for such a in depth vid! figuring out how to connect via OBD 2 atm
@Bbeavis 5 місяців тому
Glad it was helpful! That's my next project to share here, how to connect via OBD2
@BLBlackDragon Рік тому
This is impressive. I've been thinking of doing something like this to supplement my vehicle's existing dash. Add gauges for things that currently only have dummy lights, or nothing (like the turbo).
@Bbeavis Рік тому
Thank you Black Dragon.
@pascaleow299 Рік тому
😊😊😊😊
@stevesloan6775 Рік тому
Wild idea brought to light. Theres just not enough new automotive video tutorials on the web anymore. Sort of tempted to do this on my Audi mk1 TT centre console.
@Bbeavis Рік тому
Thank you Steve. I think I tend to agree. My view is there are a lot of automotive vids on youtube, but they are more about doing crazy builds or making click bait, as opposed to more traditional info/how-to type videos.
@mikeiver 11 місяців тому
Pretty darn cool. Didn't know about the dash board project but had thought that a pi or the like would be a great way to present info. Fantastic basic tutorial there! Thanks!
@Bbeavis 11 місяців тому
Happy to share with everyone, thanks for watching!
@witchcraftauto 11 місяців тому
Of all the car videos i've watched over the years, this one is by far the one I've waited for! AMAZING
@Bbeavis 11 місяців тому
Wow, thanks very much, may I ask what did you find so valuable about it?
@jims.3987 2 місяці тому
@@Bbeavis He doesn't realize you need an aftermarket ecu to make it work yet. LOL You probably should have let everyone know in the beginning that you can't do this project with an OBDII stock ecu. Or at least these instructions won't help you with that project. I am sure there is a way to take a Pi and pickup the neccesary pids for the gauges from the OBDII it's just not in this video.
@therealtpain90 Рік тому
THIS BRO! I was literally thinking of a way to make something like this yesterday lol. Hell yeah man thats sick, im 100% doing this!
@Bbeavis Рік тому
Thanks mate, hope it goes well :-)
@davidfuller9537 Рік тому
This is awesome and has definitely encouraged me to try to build a pi dash. Although Ill be using an ecu masters standalone instead of the ms3 but I believe it should still work via their extension port
@Bbeavis Рік тому
Great David, good luck I hope your build goes well.
@oenvhandel4917 11 місяців тому
did you get it to work with your ecu master?
@marksvideochannel3592 Рік тому
Im glad you've done this, I was going to ask after watching your recent video, the dash looks amazing. Will watch it later after work.
@Bbeavis Рік тому
No worries!
@BlakeBarrett Рік тому
Thank you for this video! I have been planning on doing something like this for my motorcycle, but wasn't aware of these dash projects.
@Bbeavis Рік тому
Sure thing!
@Gfunkbus76 Рік тому
Very nicely done video! I've been making my own diy VW Digifiz inspired software for a dashboard in my classic pre-obd car. Good fun! Thanks for your perspective.
@Bbeavis Рік тому
Sounds great! Thanks Gavin.
@LunaTheCRX 10 місяців тому
Hello Gavin, did you find any doc or info how to wire RPI to stock ECU? I'm currently thinking about how to make it in my 93 honda delsol. I can't find any sources how to do this without standalone ecu
@ShahrezanSickander 8 місяців тому
how you do it
@ateamm Рік тому
Might have to give this a go to update my current dash. I mounted mine in the center console and also removed the stock climate controls. Since it's a street car I have a tuner studio dash on it but also wrote a python app to control an Arduino that runs some relays and servos to have touch screen control of my climate control. Not fully implemented in the car yet but prototype is currently working.
@Bbeavis Рік тому
Nice work mate, sounds like you have it all under control already, but maybe theres a few options offered here that you can get some benefit from.
@akryder Рік тому
Very cool setup and nicely laid out how to. Gives me an idea for an aux screen in my car for when on track. Thanks!!!
@Bbeavis Рік тому
Glad it was helpful!
@antonioalemar5406 2 місяці тому
This was extremely useful! Thank you so much for taking the time to make this video and the dashboard models!
@Bbeavis 2 місяці тому
You're very welcome!
@Bbeavis Рік тому
To answer the Frequently asked questions: How does it connect to the ecu? - Via USB connection from the Megasquirt MS3 ECU direct to the RasPi. Why didn't you use XYZ off the shelf product? - Because I like to tinker, and I can customise this how I like. What about OBD2, or some other aftermarket ECU? - Sorry, I have never tried this for anything other than the Megasquirt family of ECUs... You can check out a product called 'OpenAuto': bluewavestudio.io/shop/openauto-pro-car-head-unit-solution/ Or if you have a different aftermarket ECU, or OEM ECU with OBD2, or even a carby car, consider trying this software instead: OneGauge, theonegauge.com Or, I am sure you can find other info online though for software options that might work for your car!
@Tarun_Kausthub Рік тому
I want to use this for my Bike, which doesn't have a ECU. Can you help me with a possible solution?
@Bbeavis Рік тому
@@Tarun_Kausthub Hi Tarun, sorry to say that is quite a different solution to what I presented here, a bit too far outside of my realm - you are effectively starting from scratch from a software perspective.
@Tarun_Kausthub Рік тому
@@Bbeavis Ok, Thank you for the reply!
@saheemali Рік тому
Hi, reckon this can work with a haltech ecu?
@Bbeavis 8 місяців тому
For a different ECU you may need to try the OpenAuto software or instead: OneGauge.
@cyruslegg Рік тому
Awesome work! I created a very similar dash, the only difference is that I designed a safe-shut down circuit that utilizes the ignition signal and a little bit of hardware logic to automatically boot and shut down with the car keys. The initial prototype was just kluged together on a breadboard but I turned it into a PCB but have yet to get it made. Hopefully one day...
@Bbeavis Рік тому
Nice work Cyrus, thanks for sharing your setup. For me, I have a hard battery kill switch, theres no ignition key in my track car, so that wasn't really going to work for my setup.
@cyruslegg Рік тому
@@Bbeavis ah yes of course, because racecar. I love it! I’m definitely going to check out dietpi now though. Thanks again for the amazing content.
@blaneandgame9 9 місяців тому
Could you elaborate a little more on this? I'd like to be able to use this setup on mine as well.
@cyruslegg 9 місяців тому
@@blaneandgame9 automotive electronics (battery/alternator) are inherently noisy and contain a lot of transient voltage spikes. That said, sensitive electronics like RPi’s need protection from these voltage transients to avoid eventual death from the shock treatment they will certainly receive. Additionally, memory for computer systems like RPi’s can be corrupted when not safely shutdown (eg: yanking the power plug without pressing “shutdown” in the system menu). My circuitry provides three main features: 1. Protection against high voltage spikes, 2. Turn on with ignition on, 3. Safe shut down of the RPi when the ignition is turned off. Meaning the control circuitry has hardware logic working in conjunction with a Python script in the RPi to shutdown the RPi safely despite ignition telling the circuit to turn off… I hope that helps highlight for you the problems I encountered and the methods I took to address those problems.
@hurst_luke 8 місяців тому
@@cyrusleggI've used OSH Park to have small batch PCBs made for my own car projects. Very affordable and fairly fast turnaround.
@Fujikawa42 2 місяці тому
This is a great guide, I will be using this info to remake the dashboard on my megasquirted 280Z
@Bbeavis 2 місяці тому
Good luck!
@thetuner3333 Рік тому
Awesome video, you helped me confirm what made me doubt a little on my project which was if using volt converters on the dash was a good idea
@Bbeavis Рік тому
Glad I could help, thanks!
@colossalbigfoot256 Рік тому
I would definitely run this in my car. So glad you did. Now if we could just get that sequential.. 😂
@Bbeavis Рік тому
Still on the wishlist :-)
@jmac636 4 місяці тому
Clearly no one reads comments before posting a comment…ugghh. Sorry you have to keep answering the same question over and over again. “NO IT DOESNT WORK ON YOUR MAMAS STOCK PCM COOTER MOBILE!!”😂
@Bbeavis 4 місяці тому
Thanks mate! I am just glad lots of people are discovering these solutions are out there, yes a lot of people ask the same thing, but its an opportunity to give them more info in a new video for the different people and their different needs.
@Xsiondu Рік тому
Man that's something I've always wanted to do. Now it is within reach. Thank you for sharing
@Bbeavis Рік тому
Glad to hear the video could help you.
@dklimowi Рік тому
Awesome! Got a build coming up and will definitely use this for it. Nice job man!
@Bbeavis Рік тому
Awesome! Thank you!
@tyabrahamse2461 6 місяців тому
This is really cool. I want to build this for my Overlander. I'm going to watch more of your videos because I want to find out how you connecting the pi to the can lines. Thanks so much!
@Bbeavis 6 місяців тому
Have fun!
@antbymcnair4297 Рік тому
Really nicely done. Thank you for the links and the video. I might be giving this a shot soon.
@Bbeavis Рік тому
Appreciate the kind words.
@dodgersfnshepard8673 2 місяці тому
Thanks bro, this is the video I've been looking for! Testing in a lancer DD then either replacing or monitoring a built honda
@Bbeavis 2 місяці тому
No problem 👍
@viteliohernandez Рік тому
Thank you for the step by step guide, I need to figure out a way to use it with my factory ecu but I guess I gotta keep searching youtube for that one
@Bbeavis Рік тому
Good luck!
@carloslvm 9 місяців тому
Amazing Raspberry Pi project. It's awesome, the amount of things you can do with that tiny board.👍
@Bbeavis 9 місяців тому
Thank you! Cheers!
@199854a 5 місяців тому
this is pretty badass and might end up making one, would wire mine to ignition for power on and off. thanks for the starting point
@Bbeavis 5 місяців тому
Thanks. There's some clever add-on circuits people have made to auto power on/off their pi with car power if you want a more automated power solution.
@dejantunjic6146 3 місяці тому
You are a legend man great tutorial and I hope to see many more like this in the future its time for tech guys into cars to start more DIY videos!
@Bbeavis 3 місяці тому
I appreciate that!
@SammyRavage 3 місяці тому
This is awesome. I'm goofing off with getting a speeduino ready for a car and saw this and was like this is definitely an alternative from using Dash MS on a tablet.
@Bbeavis 3 місяці тому
Awesome, good luck! I found the android ShadowDash app to be a little less usable than the Pi based solution.
@evanhale7296 Рік тому
This is exactly the video i was looking for. thank you so much!
@Bbeavis Рік тому
You're welcome!
@Gus247365 Рік тому
excellent guide - great video... thank you!!!! Will share results when I finally get to build one 👌
@Bbeavis Рік тому
Sweet, thanks Andy.
@uffeibsen8872 8 місяців тому
Great tutorial/project. Thank you for sharing !!!
@Bbeavis 8 місяців тому
Thanks for watching!
@punisha00 Рік тому
Thank you for the video. Really great delivery. Keep up the good work
@Bbeavis Рік тому
Much appreciated!
@juanignaciocaino 8 місяців тому
Excellent video! thanks for sharing.
@Bbeavis 8 місяців тому
Glad you enjoyed it!
@EricNormanSilviaJDM Рік тому
Really is an ultimate guide. Thank you for the detailed breakdown.
@Bbeavis Рік тому
No problem!
@SketchyDJM 4 місяці тому
Thank you for the detailed setup.
@Bbeavis 4 місяці тому
My pleasure, thanks for watching!
@Omniwoof 9 місяців тому
I love how the clock on the dash is outputting something (gforces?) as well. Nice project mate.
@Bbeavis 9 місяців тому
Thanks :-) Assuming you mean the blue digital gauge, which is AFR.
@brokenagain_mini6897 Рік тому
Nice setup. Going to have to update my OS. Only thing I did different was instead of the shut down button I used an on-screen shutdown button through TS
@Bbeavis Рік тому
Good idea, well done.
@WahringRaceWorks Рік тому
Very cool. Always wondered what was involved in setting up a raspberry pi
@Bbeavis Рік тому
It's a "tinker" type of project, but eventually the end product is pretty valuable.
@alejandroberistain4831 8 місяців тому
Loved the detailed, step by step instructions. Hopefully I will soon have a project to build in with, since I already have the Pi lol.
@Bbeavis 8 місяців тому
Thanks, good luck with your projects :-)
@mostlyuselessgarage Рік тому
Dude, ur a legend! Been wanting to do this since discovering your original dash vid from a few years ago! Just need to buy that screen. Thank you!
@Bbeavis Рік тому
Glad I could help!
@bencartwright8650 7 місяців тому
Great project. Really helpful vid
@Bbeavis 7 місяців тому
Thank you!
@SpaceMyName 8 місяців тому
This is great, I've been wanting to work on a custom dash for some time.
@Bbeavis 8 місяців тому
Go for it!
@pepep3210 5 місяців тому
Just finished the installation. I think this will be usefull! Thanks a lot.
@Bbeavis 5 місяців тому
Glad it was helpful!
@kwamecornelius9857 7 місяців тому
Awesome video will definetly try it out on an upcoming cross kart project
@Bbeavis 7 місяців тому
Good luck!
@maikinmoves Рік тому
Thats pretty. Awesome job, now i just have to figure out how to port and mount this concept to my Harley.
@Bbeavis Рік тому
Hah Harley isn't a use case I had envisioned but no reason why you cant give it a go!
@rodneywade8483 Рік тому
Awesome work. I have a foxbody that'll be using this type display pretty soon. Keep up the good work.
@Bbeavis Рік тому
Cool, thanks Rodney.
@coronaje 11 місяців тому
What a great content, thanks!, really liked bottom index, very organized!. Useful.
@Bbeavis 11 місяців тому
Thanks very much, glad you liked it! :-)
@Domspun Місяць тому
So going to do that! Thanks for the idea!!
@Bbeavis Місяць тому
Hope you like it!
@bigfwopl4873 Рік тому
This is one of the coolest things I've seen all year
@Bbeavis Рік тому
Thanks mate you are too kind.
@jonivanart 3 місяці тому
Very cool!! I might end up using this in a future project! 👏👏
@Bbeavis 3 місяці тому
Hope it helps, good luck!
@bustersat 5 місяців тому
Awesome video! Very well put together! Thank you!
@Bbeavis 5 місяців тому
Glad you liked it!
@adamtout Рік тому
very cool... saving this for my build!
@Bbeavis Рік тому
Thanks Adam.
@njm9572 7 місяців тому
Fantastic Work
@Bbeavis 7 місяців тому
Thank you so much 😀
@Mr.Fedora007 8 місяців тому
Brilliant. Will be adding this to our BMW race car build
@Bbeavis 8 місяців тому
Good luck with your build :-)
@MikeMcDonoughUS Рік тому
Neat solution. Thanks for sharing the details!
@Bbeavis Рік тому
Glad it was helpful!
@thegametinkerer Рік тому
This is really cool. I wish I could include something like this for my 88 trans-am, but I deleted all the ECU/wiring/ and EFI. Still a very cool option for those that are building a racecar on the cheap.
@Bbeavis Рік тому
Thanks Game Tinkerer :-)
@johnny_gtr Рік тому
Really enjoyed watching that. Great job.
@Bbeavis Рік тому
Thank you, appreciate it.
@mitsos306ify 8 місяців тому
Great idea, great work, great video!!!
@Bbeavis 8 місяців тому
Thank you very much!
@yeders Рік тому
This is awesome, got my sub. This coinsides with a long term project of mine, but I'll be attempting to read via Canbus.
@Bbeavis Рік тому
Good luck, keen to hear how you go with a CAN based solution.
@RichardDuck Рік тому
I've absolutely got to try this!
@Bbeavis Рік тому
Please do! Let me know how you go.
@latencyla2659 28 днів тому
DUDE that's so amazing, I can't believe it.
@Bbeavis 27 днів тому
Thanks :-)
@KarlKristianMoeng Рік тому
Thanks for sharing!
@Bbeavis Рік тому
You bet!
@-MindDrive- 7 місяців тому
Great video... actually covering the software installation not just the physical installation.... for your power requirements there is a couple power supplies that would remove the two switches (main power and momentary switch). One is called the M2-ATX and the other is the M4-ATX both of which are ignition controlled power supplies that are designed to turn on/off PC motherboards much like a standard car amplifier. They can be set to turn off the system while leaving enough time for the operating system to save details and boot up the operating system like OEM systems with the key.
@Bbeavis 7 місяців тому
Thanks good details to give options for people out there who want an auto-shutdown solution.
@DForez 11 місяців тому
Very cool, thanks for sharing
@Bbeavis 11 місяців тому
Cheers!
@FORDSCORT Рік тому
Excellent video mate, definitely something I would love to have in my Ford Escort MK2, few more things to tick off the list then will probably start picking your brain with questions 🤘👌
@Bbeavis Рік тому
I'm just jealous of your Escort to be honest, such a cool car.
@FORDSCORT Рік тому
@@Bbeavis yeah it's a beast lol well hopefully 🤔 got to get through the Dyno session with the new engine then hopefully scaring the hills wildlife with the screaming Weber symphony 🤘. My grandfather bought it new in 76 restored in his honour 👍 keen to see if I can incorporate the same style of dash set up in the old girl like yours
@67comet 5 місяців тому
This' very good. I had no idea there were guys out there taking raspberry pi / car combo setups seriously .. I've been using an Android headhunt to get all my data and it's been "not so good". RPM lags behind actual RPM, temps are okay, but vacuum pressures are sketchy, and voltages are a little hit or miss.. Bookmarked all the way :). Thanks much, I've got my winter project defined now :).
@Bbeavis 5 місяців тому
Thank you. I initially ran an Android tablet and found the feature-set and responsiveness to be inferior to this solution.... but maybe with a more modern tablet, and the newer Apps on the market it would be worth a revisit now.
@conconstantinou2890 Рік тому
Great work mate, very informative.
@Bbeavis Рік тому
Thank you very much for watching.
@Troupe454 10 місяців тому
This is awesome thanks for the amazing how to guide
@Bbeavis 10 місяців тому
Glad you enjoyed it!
@woznaldo Рік тому
I looked at Dash options and saw several solutions but, needed something I could make a custom dash with. In particular I wanted something like retro Smiths instruments and options were limited. I looked at Pi Dash but was uncertain on what it could and couldn’t do. Noting how powerful a little Pi is, I considered starting from scratch but, that’s a little beyond me. Your solution looks good but I’d want to use it with a non-MS ECU via CAN. I’ll look into you solution a little deeper. Nice clear presentation by the way!
@Bbeavis Рік тому
Thanks woznaldo, there is some CAN based dash software out there for the Pi, that may work for your needs.... You'll need to get a little inventive.
@joysticktabby4520 7 місяців тому
This goes hard as nails bro can't wait to put this in my car whenever i buy a car
@Bbeavis 7 місяців тому
Thanks very much.
@shanesdiy Рік тому
Excellent work and great tutorial!
@Bbeavis Рік тому
Thanks a lot Shane!
@suyashwarke335 8 місяців тому
Thanks for the detailed video , i was actually thinking of building one for my daily driver but it has a stock ecu so i don't know from where to pull the parameters from.
@Bbeavis 8 місяців тому
Hey Suyash, So sorry, that is something I glossed over, if you wanted to use OBD2, perhaps the OpenAuto software would work for you... or consider trying this software instead: OneGauge, theonegauge.com. Hope that helps, thanks very much for watching.
@suyashwarke335 8 місяців тому
@@Bbeavis Thanks for the info this will surely help.
@mickgrose6743 3 місяці тому
Awesome dude. Love it!
@Bbeavis 3 місяці тому
Thanks a ton!
@wowhthumperh5911 10 місяців тому
Thank you for the great content
@Bbeavis 10 місяців тому
My pleasure!
@sandman7793 Рік тому
Awesome tutorial. Turned out nice and clean.
@Bbeavis Рік тому
Thank you! Appreciate it!
@NaiyimsGarage 8 місяців тому
very good information and i will start to do for my JEEP XJ
@Bbeavis 8 місяців тому
Best of luck!
@HondaBoiFlloyd Рік тому
Very good tut thank you so much for this!
@Bbeavis Рік тому
No worries!
@hanyabi-habib8226 2 місяці тому
This was LEGIT! I LOVE it when people have thought out and kind of practiced what they are going to say. I can NOT stand videos full of blah blah blah. Saved and Bookmarked for sure.
@Bbeavis 2 місяці тому
Thanks mate, appreciate that a lot.
@gaspererjavec7108 Рік тому
Damm, i would have never thought of this. this is also usable for all the speeduino guys out there. Ad you can have a keyboard/mouse combo with you and change things when needed
@Bbeavis Рік тому
Exactly! Lots of possibilities. Thanks Gasper.
@_AmericanDad_ Рік тому
I may need to do this in my b5s4 racecar...........awesome video!
@Bbeavis Рік тому
Thank you fellow Audi owner. ❤
@_AmericanDad_ Рік тому
@@Bbeavis sub'd
@maddida Рік тому
Amazing build
@Bbeavis Рік тому
Thank you maddida
@manthienhoa Рік тому
Nice job man!
@Bbeavis Рік тому
Thank you! Cheers!
@johnswilley6764 Рік тому
Liked, and subscribed. Thank you Sir!
@Bbeavis Рік тому
Welcome aboard!
@kylegraham5752 Рік тому
Sir you are a lifesaver, looooove the content. I'm definitely subbing.
@Bbeavis Рік тому
Awesome, thank you!
@damarlo1 9 місяців тому
Ngl i would 100% buy this setup from ya. Im terrible with tiny wires. So i can see me messing this up so quickly if i were to do this on my own
@Bbeavis 9 місяців тому
It's all achievable for pretty much anyone, the video takes you through it all... you can do it!
@damarlo1 9 місяців тому
@Bbeavis def gonna be trying my hand at it soon 😁
@viperstd Рік тому
Great work. Thx.
@Bbeavis Рік тому
Thanks for watching!
@RBGgermanKX250F Рік тому
Awesome guide. Thanks for this. Have been back and forth on doing one of these for years. I am assuming you're using a megasquirt for the data connection to tuner studio? I'm going to have to look into if there is connection with other ECUs possible . The screen looks pretty nice and bright. I'd definitely have to get boot times down a bit and have it automatically turn on and off with ignition. But this has definitely renewed my interest. Great stuff
@Bbeavis Рік тому
Thank you, yes indeed this is using the TunerStudio software, specific to the Megsquirt ECUs. This car runs an MS3 which connects to the Pi via USB cable. I agree on loading times, I'm constantly trying to improve them.
@bethk1521 7 місяців тому
I run a Haltech on my MX5 and want to try this hopefully i can figure out a way to run the Haltech application instead! Ty for the tips!!
@Bbeavis 6 місяців тому
Good luck! Since you have a different aftermarket ECU, perhaps either the OpenAuto software, or OneGauge theonegauge.com, may work for you. Hope that helps, thanks very much for watching.
ExileShow
Переглядів 4,8 млн
Novaspirit Tech
Переглядів 658 тис.
DB Tech
Переглядів 144 тис.
CM_Spinner
Переглядів 17 млн
Вы ещё не готовы #эндуро #эндурокросс #мотоцикл #мото #кросс #прохват #moto #motocycle #enduro #cros
Денис Сумкин Enduro
Переглядів 931 тис.
ВАХТА ДЛИННОЮ В ЖИЗНЬ OldSchool
Переглядів 2 млн
opelservice kyiv
Переглядів 1,2 млн