Let me show you how to make gorgeus props by #electroplating your 3d prints. This is the Narsil Sword from #lotr . #3dprinting and metal plating combined will create convincing objects for you prop collection or the next comic con.
* Bright Copper Electrolyte: amzn.to/3YUX7Cy *
* Copper Conductive Varnish: amzn.to/3IhsfVU *
* Galvano Degreaser: amzn.to/3XGa4Pv *
* Palladium Electrolyte: amzn.to/3YKEfpY *
(*) These links are affiliate links. From time to time, I recommend products I know well and use, and, as a result, I may receive a commision if you purchase them using the affiliate link. Puchasig from affiliate links is at no extra cost to you.
▶ Setting up the bath: • How to Metal Plate 3D ...
▶ Chapters
00:00 Introduction
00:28 Creating the 3D Print
01:23 Super Smoothing 3D Print
02:18 How much does it weigh
02:38 Bath Plating Process
06:05 Polishing the electroplated copper
06:40 Nickel Electroplating (Bath)
07:23 Palladium Electroplating (Galvanic Brush)
07:53 Gold Electroplating (Galvanic Pen)
08:19 Covering the handle in Leatherette
08:55 Physical Properties of Electroplated 3d Prints
09:27 Conclusion + Impressions
▶ Narsil by 3D-mon
www.thingiverse.com/thing:483...
For the Conductivity I used
* Tifoo Conductive Copper Paint
! Make sure that it can be used with your copper electrolyte.
For the galvanic bath:
* a container
* acidic copper electrolyte
* optional nickel electrolyte
* Palladium electrolyte
* Gold electrolyte
* one or two copper anodes
* banana plug & alligator clips
You may need:
* Degreaser
* Distilled water
* galvanic brush + pen
Have fun. Try it. 🧡
Have a look to my other Videos
######################
Electroplating 3D Prints | Thermal Detonator
• Electroplating 3D Prin...
How to Metal Plate The Ring from LOTR
• Electroplating 3D Prin...
Electroplating 3D Prints - Super Smooth
• Electroplating 3D Prin...
DIY Electroplating 3D Prints ... (the shiny way) 🧪
• How to Electroplate 3D...