Code & Schematic: github.com/saiyam-agrawal/ESP...
Detailed step by step procedure on instructables: www.instructables.com/ESP32-B...
Buy Me a Coffee: ko-fi.com/saiyam
Instagram: / saiyam_rakh
Instructables: instructables.com/member/Saiyam
Telegram: t.me/saiyamagrawal
____________________
Hi, in this video I will show you how to make a Weather Station using the very famous ESP32 with 3 sensors that can measure and display live values including:
1) Teperature
2) Humidity
3) Barometric Pressure
4) UV Index
5) IR Radiation
6) Visible Light
The parameters are displayed on the Blynk IoT platform both on the Web Dashboard as well the Phone App in the form of live values and charts. This can be a good project to get started with IoT. Hardware and connection part is easy. Code and setup part is just a bit lengthy so watch the video carefully till the end to make sure everything works.
Here's what you will need to build this project:
-ESP32 Development Board
-DHT11/21/22 Temperature & Humidity Sensor
-SI1145 Sunlight Sensor
-BMP180 Barometric Pressure Sensor
-Perfboard or Breadboard (to make connections)
-Male to Female Jumper Wires
-Grove Connector Cables (only if you're using grove sensors)
-Micro USB Cable
____________________
Don't forget to Like & Share the video. Subscribe to my channel for more awesome DIY!
Do leave a feedback in the comments section below. Any questions/suggestions are welcome.
You can also drop me an email at: saiyamagr@gmail.com
Thanks for watching! :)
Tags:
#weatherstation #esp32 #internetofthings