👌🏽👌🏽👌🏽 good fabrication and the Eaton gaskets are the one saves messing with pax

I loved doing this when I was at college, it must be at least twenty years since I did any metal trunking. Fantastic job you did there mate better than I could do, Fantastic video mark as always 👍👍👍❤️

When I did trunking fabrication we would cut fish plates to put inside and then drill and pop rivet.Happy days when time was not an issue

Nice neat job Mark the mini grinder looks good

Thank you. Makes sense since I've just completed year 2 C&G!

would be intrested to see a more in depth video on slotting. I'd like to become better at it. straight cuts paxalin possibly lining up 2 boards sharing the same slotted trunking its an artform

Hi Mark, we do the same thing with the trunking around the board usually 150 x 150 as for the number of cables and sometimes bush and lockring left and right wholesalers never seem to stock the square edge 90's always the gusset type so we have got wise and order ahead but well done I could see the gray matter going there on recall. Ps don't lose the stickers and door handle my mate always does.

Happy days Mark . It’s a skill they should be teaching because there’s always a job where off the self bends are not sustainable . We would also put extra lid fixings in to stop it flapping around . And do all this with just a hacksaw , so I recon with a grinder I could make it cost effective and even more so if an apprentice was doing it . A win win situation as they say , educational and money saving . I wonder how many jobs have come to a standstill because know body has the relevant skill set to do this . Finally call me old fashioned but I think it actually looks better , what do your lads think ? 😂. Best wishes and kind regards as always 👍👍👍

Nice effort. I like manufacturing my own but haven`t had to for a while now. I usually only cut out half of what you did and use the bit we don`t cut off to form the inner join. I was waiting to be impressed by your skill with a hacksaw and then you brought out a battery grinder lol.

Great presentation. Problem with using a grinder on site is you could be into hot metal works and it's surprising how far sparks can travel.

i do this all the time at the board. as the company i work for always gets guseted bend and you cant get them tight to the board.a flat 90. usually take about 10 min and all i use is a roofing square a grinder a file and a drill. i also score the back of the bend with a gengle pass with the grinder and it leave a nice square clean edge. Thats just how i do it. but your way did look good

Great job mate, we have to use paxalin inbetween DB and trunking.

Nice work Mark, if you costed the time, how does it compare with using preformed angles

Are you using the trunking as the CPC?

Hi Mark just wondered I was told on site that I couldn’t fabricate bends as butted joins we’re not allowed anymore as the butted join is not to standard or IP rating is that correct?

How do you find the m12 cut off tool?

Shouldn't you fillet it? If you just cut one 45 and cut the lip off the other 45 then you can just put in some self tappers and have a better earth on the trunking.