FOUR Cylinder 1/6th Scale RC Car Build - Cooling, Electronics, Mods & FIRST Test!

  Переглядів 2,995,122

JohnnyQ90

JohnnyQ90

2 роки тому

Engine of this video & other interesting stuff:
➥TOYAN FS-L400: bit.ly/3jxejdR
$100 OFF Coupon Code: L400 , Only $699.99 ,Save $100
➥Starter kit: bit.ly/36ShQhS
➥Toyan Engines: bit.ly/2VGhYuR?ref=8_o3dxgl2q...
➥Toyan Parts: bit.ly/3rzyY3D​​
}}}}} Use code: jq90 for 10% discount {{{{{
-----------------------------------------------------------------------------------------------------------------
►NEW UPCOMING TOYAN V8 ENGINE!
➜ bit.ly/3rkRM94
----------------------------------------------------------------------------------------------------------------
➥My electric screwdriver:
SEQURE SQ-ES126: ban.ggood.vip/XyHU​ (Sale code: BGSQES126, US$81.44, 24th-27th only; usual code: BGSQ126, 10%off)
➥My 3d printers:
- Creality Ender 3 Pro:
ban.ggood.vip/XyHT​ (code: BGE3P36,US$186, US/UK/CZ/ES/AU warehouse)
- Creality Ender CR-6 SE:
bit.ly/3wZnKZ4 (code: BG8cfba7, CN warehouse, US$389, BG175e98, USA/AU/PL/ES warehouse, US$379)
➥Favorite radio system:
RadioLink RC4GS: ban.ggood.vip/XyHS​ (code: BG685310, 10%off)
➥Other stuff you might be interested in:
Coupon Center: ban.ggood.vip/Xw6T​
Tools and Electronics Sale: ban.ggood.vip/Xw6S​
RC Toys Sale: ban.ggood.vip/XxT8​
----------------------------------------------------------------------------------------------------
Dennis Dempsey Radio out of control Video with air filters mod:
• TOYAN FS-L400 AIR FILT...
-------------------------------------------------------------------------------------------------------
➥Subscribe! bit.ly/2m1d1y7​
➥Instagram: johnnyq_90
➥Support my videos!: / johnnyq90

КОМЕНТАРІ: 1 700
@bvaughn
@bvaughn 2 роки тому
The stock gearing for an RC car like this is built for an engine that can turn over 30k RPM. Looks like the max for the FS-L400 is around 13k RPM. If you made the ratio of that belt that connects the engine to the transmission something like 1:2.5 then it'll likely make the 3-speed transmission shift well because that's the expected input RPM range. It'll also get you more to within the expected speed range of that stock RC model. For the clutch springs, I doubt you'll find springs like that but soft enough for the RPM range you need. I've seen some clutches that have holes in the shoes for a steel pin that can be inserted to increase the centrifugal force and make it engage at lower RPM. I guess you could also put the clutch on the driven side of the pulley too if you do the ratio change and then it'll work as-is because of the RPM increase. Make sure to oil those air filters! They're pretty thin too probably want to consider a thicker setup. Overall awesome build! One more thing, if your radio doesn't have a built-in fail-safe then buy one. Nothing like going full throttle until the radio goes out of range (or battery dies or whatever) and having the servo just get stuck at full throttle. The fail-safe detects that the servo signal from the radio is lost and will command the servo to a preset position (ex. full brake).
@LowMedow
@LowMedow 2 роки тому
Good Comment
@LucasBell420
@LucasBell420 2 роки тому
I like this comment :)
@andreashabeck1155
@andreashabeck1155 2 роки тому
Very good comment
@daftbence
@daftbence 2 роки тому
Great comment
@fastopernambucano1312
@fastopernambucano1312 2 роки тому
Superb comment
@andrewanderson5297
@andrewanderson5297 2 роки тому
holy smokes that sounds outrageous! If they make a NSX body that induction plenum would look really cool poking out the back window and above the roofline.
@powerprime99
@powerprime99 2 роки тому
genius!!!
@waybous
@waybous 2 роки тому
Damn good idea.
@ray-charc3131
@ray-charc3131 2 роки тому
How about fuel consumption, is it more?
@caseygiles656
@caseygiles656 2 роки тому
Ll
@627horsepowers
@627horsepowers 2 роки тому
8:16 engine has a nice bark to it.
@karlcarolusrexxii1352
@karlcarolusrexxii1352 2 роки тому
That's the blow off valve
@estiloproductions1778
@estiloproductions1778 2 роки тому
@@karlcarolusrexxii1352 r/wooosh
@thatangrygerman2076
@thatangrygerman2076 2 роки тому
@@karlcarolusrexxii1352 on a NA engine, good one
@karlcarolusrexxii1352
@karlcarolusrexxii1352 2 роки тому
@@thatangrygerman2076 it was a joke yeez. Calm down. Did yall think it was a serious comment?
@julia_oh
@julia_oh 2 роки тому
@@karlcarolusrexxii1352 That's the blow off woof woof. Also don't mind the people that didn't catch your joke, don't even explain it, let it flow.
@CLCIII
@CLCIII 2 роки тому
Sounds and works great! Impressive build! I would love to see it in a much bigger area and hear it Rev out completely! Looking forward to next video!
@napadan
@napadan 2 роки тому
Dem this rc have better sound than my daily motorcycle
@ThePower1037
@ThePower1037 2 роки тому
:) hehe ;)
@rad.6001
@rad.6001 2 роки тому
@hay man suzuki tornado gs
@sakumara
@sakumara 2 роки тому
Ahahahh 😂
@PoisonStore
@PoisonStore 2 роки тому
Tornadonya pake 2 silinder bang. Pasti sama.
@rad.6001
@rad.6001 2 роки тому
@@PoisonStore pfftt
@Fastaschit
@Fastaschit 2 роки тому
JohnnyQ90 these engines will be more snappy, responsive, and overall more performance if the exhaust tubes or header manifold have larger tubing. Need to be larger than exhaust ports on heads. Being same size as ports will bog down the motor because of the extended length. Just like a automobile tubes are much larger than exhaust ports on head because it has to push exhaust gasses all the way out to rear bumper. Engine needs to breathe easy. Oversize is better than too small. I bet you would gain 10 to 15% performance maybe more. Awesome work you do and great craftsmanship. Videos are great work too.
@clubsport9334
@clubsport9334 2 роки тому
Not 100% true mate. Oversize exhaust can rob smaller capacity engines of torque. Some back pressure is required. Large capacity engines like bigger V6's or V8's can def handle bigger pipes but smaller capacity engines for example high performance street bikes still use 1inch-1 1/2 tubes in order to allow the scavenging effect of the pipes to be maximised. I'm sure the builder has the experience to gauge the best size for his build. Cheers.
@sepg5084
@sepg5084 2 роки тому
@@clubsport9334 backpressure has never increased power, it is scavenging that increases power. Properly tunes pipes that makes use of the pressure waves correctly improves the power, not backpressure.
@Superbobo1
@Superbobo1 2 роки тому
@@sepg5084 So you just refused to read the part where they said "in order to allow the scavenging effect of the pipes to be maximised." ?
@oliverscorsim
@oliverscorsim 2 роки тому
I'd argue against this I always go with small primaries to keep gas speed high and have always had great results. Rule of thumb is 1in is good for 100hp na. This doesn't really hold up with extremes like giant engines or tiny engines but certainly its close for everything in the car to motorcycle range.
@Matty.Hill_87
@Matty.Hill_87 2 роки тому
There's a guy in Germany who is building race heads for these engines with bigger valves and stuff, his UKposts channel is called timsane projects
@eddyheredia8194
@eddyheredia8194 2 роки тому
Cool build. Motor sounds great. Very impressive. Definitely one of the best nitro builds I've seen. Can't get over how good it sounds
@fridonina
@fridonina 2 роки тому
I wish I lived in a world where everything just fits in one click ........
@dylanhartford7417
@dylanhartford7417 2 роки тому
I feel like that’s on of the many positives of 3D printing. You can make it exactly how you want it.
@theoneandonly7895
@theoneandonly7895 2 роки тому
Then you should go to Legoland.
@justethical280
@justethical280 2 роки тому
@@theoneandonly7895 LoL
@albertellwyn4891
@albertellwyn4891 2 роки тому
Yep usually takes a few good hits with a hammer and a whole lot with your fists.
@4real681
@4real681 2 роки тому
Your content is by far the best on whole youtube. Simple, no nonsense useless speaking, no clickbait or ads, just enjoyable time! I love it!
@ddd228
@ddd228 2 роки тому
What is that green fuel?
@rublenoob830
@rublenoob830 8 місяців тому
@@ddd228nitro
@rockybob
@rockybob 2 роки тому
Build a realistic nitro engine car which has engine in the front it would really look cool!
@amandeepsingh9763
@amandeepsingh9763 2 роки тому
Thats not about looks it need money
@superlazy3355
@superlazy3355 2 роки тому
@@amandeepsingh9763 my man will build it not buy it!
@UJustGotGamed
@UJustGotGamed 2 роки тому
@@superlazy3355 you realize all of this was purchased right? he just modified some parts to fit his needs
@akihirozheng9273
@akihirozheng9273 2 роки тому
With turbos or supercharger looks cool either...😁😁😁
@superlazy3355
@superlazy3355 2 роки тому
@@UJustGotGamed he also built some of the parts he needed... You did watch the same video and have watched others by this guy right 🤷‍♂️
@urano1988
@urano1988 2 роки тому
Watching a 3D printer doing its stuff is no where close to the fascination of watching you doing precision metal working.
@Mumpitzable
@Mumpitzable 2 роки тому
that straight four let it sound like a angry 90s superbike... just awesome
@keksie_channel
@keksie_channel 2 роки тому
do you check the temps of coolant or the engine itself? cooling it too hard could be bad for combustion in low end so maybe that playing a role ?
@christiangalli777
@christiangalli777 2 роки тому
Very Nice!! Think about applying some reflective aluminium or Gold tape on the plastic box in front of the exhaust headers, to avoid plastic deformation due to heat during long runs ;)
@BlakEnergy
@BlakEnergy 2 роки тому
I'm loving how deep the exhaust note is. Your videos are relaxing to watch. Thanks for sharing.
@kjv.95
@kjv.95 2 роки тому
cool build! thank you for sharing. may I ask isn't it supposed to be called spark plugs rather than glow plugs? since it is gasoline? thanks 🙏
@slothoner6946
@slothoner6946 2 роки тому
Personally, I’d have made some fender flares and wide bodied the shell instead of narrowing the tire footprint. Great workaround on your end though.
@MsALDARI
@MsALDARI 2 роки тому
SLOT MISA CHE CHI ASSORBE NON CONFESSA
@joeofloath
@joeofloath 2 роки тому
or different offset wheels!
@slothoner6946
@slothoner6946 2 роки тому
@@joeofloath yep, some negative/adjustable offset wheels would be perfect as well
@slothoner6946
@slothoner6946 2 роки тому
@@joeofloath excuse me, they would need to be positive offset. So used to negative offset to fill out widebody, it just flew out of my fingers.
@Tronzie
@Tronzie 2 роки тому
Can't wait to see this unleashed in the open road. Breaks my heart watching it in the confinement... 😎
@homienat3374
@homienat3374 2 роки тому
Agree
@claytonvalentine1891
@claytonvalentine1891 2 роки тому
amazing build! your the only person to actually do instead of just talk talk talk. you are so gifted. thanks for this video
@aljensen7779
@aljensen7779 Рік тому
Multi-cylinder! Now THAT'S the way an RC should sound! Thank you for this.
@dextonmason3447
@dextonmason3447 2 роки тому
holy this sounds better then a sport bike good job!!!
@paultucker2027
@paultucker2027 2 роки тому
How about an old treadmill running machine as a rolling road dyno for testing and tuning?
@seanb286
@seanb286 2 роки тому
Treadmill not fast enough
@iraphaelk5786
@iraphaelk5786 2 роки тому
This is what I call RC modelling at its best. 2-tumbs Up!!!!!!
@waynefarrell8921
@waynefarrell8921 2 роки тому
Hi Johnny, Love the car. I am building a 6th scale hot rod with this engine and have seen loads of comments about crankshaft problems and them breaking/the need for centre support. Have you had this on your engine runs?? I have not run mine yet and need to sort it first.
@ArmiYT
@ArmiYT 2 роки тому
Looks and sounds great. Can’t wait to see it completed with the shell.
@putraadriansyah8082
@putraadriansyah8082 2 роки тому
make an alternator system to recharge the battery while engine running.. using a drone bldc motor and 3 phase rectifier and mini solar charge controller (because rpm and voltage fluctuating)
@ClutchCobraKID1
@ClutchCobraKID1 2 роки тому
Excellent build dood very cool I've been wanting to do something like this for a while but damm that 3D printer helps so much, I need one of those so bad. I got all sorts of RC cars and aircraft, but that 3D printer would come in handy for so much more than just that like working on my real cars n stuff lol, I want one so bad. what was the black material you were using for the electronics box and brackets and stuff? Looks like some kind of plastic. Actually the better question would be what materials can that 3D printer cut, and what kind of printer is it? I love how you added electric start capability from the transmitter and fan speed control that's cool as hell. Now what you need is a coolant temp sensor to transmit coolant temps back to the transmitter display somehow that'd be cool as hell. But you could always just keep a laser thermometer on you I guess. I just saw that you added a link to the printer in the description. O and now tht u dont have the rad or the fan on tht motor maybe u culd use the fan pulley to spin a blower lol or im sure u culd make a pulley with ur 3d printer to bolt up in place of the fan and run a belt from it to a lil supercharger maybe. Although I'm sure that thing boogies as it is LOL. Im always aw inspired wen i see youtube vids with good 3d print craftsmanship or even just excellent craftsmanship like this. Again mad kudos dood gonna have to check out your other vids and subscribe
@AllDayBikes
@AllDayBikes 2 роки тому
0:02 You know you watch this channel a lot when you see the exhaust pipes and you're first thought is "I remember when he made those" lol
@ThePower1037
@ThePower1037 2 роки тому
That was my best UKposts moment. Hands down I will never forget.
@CMBProjects
@CMBProjects 2 роки тому
Amazing build!! And removing the engine fan gives it a little bit extra power
@HobkinBoi
@HobkinBoi 2 роки тому
I think the fan should be automatic, with a microcontroller and thermocouple in the water loop.
@user2C47
@user2C47 2 роки тому
Why have a separate microcontroller if you can just use a couple of analog components?
@HobkinBoi
@HobkinBoi 2 роки тому
@@user2C47 You can easily program a fan curve. Maybe have the fan not run at all until a certain temperature. Though that would certainly also work.
@Robi-wan-kenobi
@Robi-wan-kenobi 2 роки тому
Wow, the sound of the engine is amazing ! Sounds like a race 4 cylinders motorcycle ! 🥰
@btk7520
@btk7520 2 роки тому
Man If this was mass produced I’d be waiting outside the store like the iPhone guys
@1Wynney1
@1Wynney1 2 роки тому
If you struggle with coolant temps, I'm wondering if a small (let's say 5mm?) spacer between the fan and rad will help. You will struggle to pull heat from the centre of the rad because of the size of the fan centre hub 👍🏼. That thing is amazing too 🔥
@Calthecool
@Calthecool 2 роки тому
He is a next level craftsman.
@newt2010
@newt2010 2 роки тому
Absolutely awesome job. Love the filter solution. Great job, and what a beast
@brucefredrick4200
@brucefredrick4200 2 роки тому
This is a beautiful build!! Did you ever get the engine to run long enough to get some road time?
@dhananjayringe
@dhananjayringe 2 роки тому
What a crazy detailed build
@exoticg9
@exoticg9 2 роки тому
Can't get enough of this channel, so creative, loving these RC videos !!!
@MrXhandsome
@MrXhandsome 2 роки тому
Johnny, if you read this message please I need you to try building an RC Torque Converter. Those centrifugal clutches are terrible for rock crawlers. they engage at a very high RPM and its really hard to have control of the car when all you need is a subtle movement. I think you have the knowledge and the tools to design and create a working torque converter that uses oil just like the real deal. Obviously the efficiency on a torque converter is 90% at best, but this is useful for Off Road RC Cars. Which leads you to disregard the Lock-Up Clutch real converters use that make a 1:1 drive ratio to make that efficiency 100% at higher vehicle speeds. In the Hobby we don't need that. Just focus on a working torque converter and I am sure you will make one that works... Once installed you will see the difference it makes. If you made it this far, I appreciate your reading into this!
@mrg6159
@mrg6159 2 роки тому
The complexity of this is mind blowing I really appreciate your work
@kainagami
@kainagami 2 роки тому
Awesome. Glad to see it more or less completed and running now 💪 Some little concerns though: Is the chassis stiff enough to withstand all this load without any reinforcement to stiffen it up? The PETG box for the electronic can handle the heat from the exhaust pipes and won't melt after a long drive?
@dmartinr41
@dmartinr41 2 роки тому
petg is kinda resistant to high temperatures
@kainagami
@kainagami 2 роки тому
@@dmartinr41 nice
@jesselopez0008
@jesselopez0008 2 роки тому
Did he just tease us all with a new engine at the end ?? Man i love these videos
@DracolegacyOfficial
@DracolegacyOfficial 2 роки тому
looks like it has a serious plowing issue when turning, i love rc cars but they are such a pain in the ass to keep enough weight and traction on the front tires. incredible work though, can't wait to see the finished product
@jimveerm3
@jimveerm3 2 роки тому
You must be 1 of the best out there when it comes to small scale rc car engines and built.
@Matty.Hill_87
@Matty.Hill_87 2 роки тому
The cooling system is clever af, the whole thing is but that I didn't expect
@AiOinc1
@AiOinc1 2 роки тому
Eh, the variable fan speed is a bit overkill and I'm confused as to why he didn't mount the radiator upside down so the hoses didn't cross over the battery but it certainly works
@Aereto
@Aereto 2 роки тому
@@AiOinc1 That would put the mounting in a less compact frame, and it is already at the frontmost part of the chassis.
@jiviteshpandab6194
@jiviteshpandab6194 2 роки тому
use the bldc motor as an alternator or attach a small one, then u don't need to worry about your battery running out and then u can add some powerful lights to it as well!!!
@colin_deans
@colin_deans 2 роки тому
Plus that battery is contributing to a huge percentage of the weight of the car.
@claurance2
@claurance2 2 роки тому
This is one of the coolest rc cars I've seen built. Very nice.
@Kevin_2442
@Kevin_2442 2 роки тому
This thing is insane! Props to the builder 👍🏽
@amsofunnygaming8208
@amsofunnygaming8208 2 роки тому
Bro u are a genius. I don't know how you do this👌
@-axel-1287
@-axel-1287 2 роки тому
Dude, this is amazing. The sound of the engine is.. WOW
@Co-SS
@Co-SS 2 роки тому
your very skilled on that 3d printer, Edited. damn your good at a ton of stuff. 4 axis mini cnc mill, lathe, its non-stop. cannot believe how much expert time/machinery is on this. That little RC car is worth more than my first car 30 years ago.
@petekobraoutdoors7324
@petekobraoutdoors7324 2 роки тому
Great build, works great ,but it sounds like it needs a little extra tuning of the engine. Wondering if the filters restrict air flow? KEEP ON BASHING, OR SPEEDING! FROM BARRIE ONTARIO CANADA
@ChrisLee-UK
@ChrisLee-UK 2 роки тому
You are like two of my favourite UKposts channels rolled into one, Mechanic After Hours and My Mechanics! Absolutely love your content! - Subscribed :D
@kingnorlen
@kingnorlen 2 роки тому
Should get an RX7 body for it, cuz it sounds like a 3-rotor 20B engine :D
@nathanheron2604
@nathanheron2604 2 роки тому
I was just looking for this comment 🤣 sounds like a motorcycle engine too
@MiGujack3
@MiGujack3 2 роки тому
Sounds like a 4 rotor to me
@readmydescription5533
@readmydescription5533 2 роки тому
Me who don't know about engines : it sounds like brrrrrrrrrrrrrrrrrrrrrrrr
@alaasyrla7838
@alaasyrla7838 2 роки тому
عمل رائع جدا بالتوفيق😍😍
@michaeldarby2242
@michaeldarby2242 2 роки тому
Mechanical knowledge, it's a art that is not seen much anymore. Nice work sir.....
@dorfsteen
@dorfsteen 2 роки тому
Sounds and looks great Johnny hope we don't have to wait too long for the next video you can also make your videos longer if you'd like because we'll watch them
@richardjones4376
@richardjones4376 2 роки тому
I'm sure everyone will agree, those clicks when you install things are very satisfying. XD
@matthewkingsmore8824
@matthewkingsmore8824 2 роки тому
That little 4 cylinder sounds amazing!
@Meyers2strokeRcgarage
@Meyers2strokeRcgarage 2 роки тому
Awesome video brother!!! I always test my machines in my backyard or my place before I take them anywhere I don’t think it’s lame I think it’s awesome you got it all figured out and working
@UpVoltageOverclocking
@UpVoltageOverclocking 2 роки тому
U have the little brass inserts on the steering servo mount in upside down
@a_s10_blazer
@a_s10_blazer 2 роки тому
I love how this thing sounds and how much it's like a actual vehicle
@triloksuryawanshi3971
@triloksuryawanshi3971 2 роки тому
@JohnnyQ90, you are such a talented artist! 😍 Beautiful creation man... beautiful. Loved it!!😍😍😍😍❤️❤️❤️❤️❤️All the best to you!!
@andykerr3803
@andykerr3803 Рік тому
Wow, that little gem sounds nicer than a real Grand Prix car!
@ProducerNepTune
@ProducerNepTune 2 роки тому
Out of curiosity how do you handle heat management? I noticed the headers directly next to if not touching the electronics box. Won't that melt the PETG? Genuinely just curious.
@tahahaider5836
@tahahaider5836 2 роки тому
The car was revving so quick, i thought it was u saying woo hoo constantly in excitement. Lol
@oldstudbuck3583
@oldstudbuck3583 2 роки тому
I’m reverting back to a kid when I retire. Hobbies were never this sophisticated when I was a kid.
@ronihermawan76
@ronihermawan76 2 роки тому
I don't know why I love this video... its relaxing me.... and I wacth it carefully, if i miss something I just turn back your video... hahaha love it
@corona2261
@corona2261 2 роки тому
Let alone that it sounds fcking awesome
@TheFarazz
@TheFarazz 2 роки тому
Meanwhile every other car manufacture is trying to switch to electric cars lol
@markzap5131
@markzap5131 2 роки тому
That's an amazing build! Wish I had your patience and skill. I admire your work. Thanks
@sammy_1_1
@sammy_1_1 2 роки тому
Loving that exhaust note... beautiful!
@cjlane4465
@cjlane4465 2 роки тому
Man this has been so cool to watch through the months! I bet you're going to be so proud when it's complete! Thanks for the content
@craigkirkland
@craigkirkland 2 роки тому
I never thought I'd say this to a grown man still paying with RC cars... IM A HUGE FAN OF YOUR WORK! MY GOD BROTHER YOURE A SMART MAN! KEEP IT UP
@Torsten.Olsen.70
@Torsten.Olsen.70 2 роки тому
Ok now this is cool and all, but I'm waiting to see a model gearbox on this thing!
@qubahka77
@qubahka77 2 роки тому
best sounding nitro rc i ever heard!
@emielvanhaverbeke3342
@emielvanhaverbeke3342 2 роки тому
Wow dude amazing vid you should build a futuristic hydrogen powered car
@lyubomir1153
@lyubomir1153 2 роки тому
build pls hot rod with engine like this ✊🏿
@jkirk7811
@jkirk7811 2 роки тому
Sounds just like a mini 4 cylinder road race bike . Absolutely awesome.
@nom8
@nom8 2 роки тому
Sounds like a tiny super bike. Amazing.
@Rameus
@Rameus 2 роки тому
You have a 3D printer! Why didn’t you just make a corvette body the size of your car?
@Sola_Scriptura.
@Sola_Scriptura. 2 роки тому
RC body its build from thin plastic and flexible can absorb a little bit impact when crash.. 3D printer use for solid plastic creation and more weight abd not flexible at all
@Rameus
@Rameus 2 роки тому
@@Sola_Scriptura. really? ukposts.info/have/v-deo/cH-QhKR4o2x1w4U.html. Please before you decide to think next time
@Meepoify
@Meepoify 2 роки тому
@@Rameus lol next thing you'll ask is why he didnt 3d print the engine just because you saw it in some video.
@Rameus
@Rameus 2 роки тому
@@Meepoify you got a good point there big baller! Thanks for the idea
@Randy_84
@Randy_84 2 роки тому
I'd be worried about hitting something and fucking up the radiator.
@thomaspower7483
@thomaspower7483 2 роки тому
Would like to see you rig a full size car for RC 😄
@Andy_Rew
@Andy_Rew 2 роки тому
honestly i love the little spinning around on the roof top. It just does it for me :)
@mannyclemente7159
@mannyclemente7159 2 роки тому
Dude that’s an awesome rc! Do you have a kill switch on it I case you loose radio frequency?
@Hugo-py2ce
@Hugo-py2ce 2 роки тому
Just awesome! The future of RC is bright because of guys like you. Thank you!
@deicidaltendencies.1118
@deicidaltendencies.1118 2 роки тому
Pretty cool. The printer would be AWESOME to have.
@gordiefrench5342
@gordiefrench5342 2 роки тому
Sounds fantastic I love it True master builder
@shmoejoedesy9449
@shmoejoedesy9449 2 роки тому
the fact it has ITBs is pretty dope.
@mrsaizo0000
@mrsaizo0000 2 роки тому
They managed to squeeze in the water cooling pump in THAT small engine?! That car is insane! Always impressed of the builds you do!!
@lralcantara
@lralcantara 2 роки тому
Did Not expect that awesome engine sound…
@christianrazemon9617
@christianrazemon9617 2 роки тому
This looks so fun 🤩 When do you put a gearbox and a temperature sensor for the fan? 😉
@kylewalker1703
@kylewalker1703 2 роки тому
This was absolutely incredible I enjoyed watching this so much put into my save category so I can watch it again and again
@msbs1813
@msbs1813 2 роки тому
The creativity and how neat the wires and build is, absolutely amazing
@gamerlive3598
@gamerlive3598 2 роки тому
i love your build cngrats! i love rc cars as much as actual cars so hopfully you going to be happy with what you got! Really clean build i love it!!!
@brianschott8162
@brianschott8162 2 роки тому
That engine sounds like an beast!
@Blackplague17
@Blackplague17 2 роки тому
That’s amazing, I’d give it a little more weight because of how much power and how well engineered it is. I know this is just base and your still adding. I mean adding weight for testing could help. Love what you’re doing hopefully you can build a completely miniaturized car in the future, but I guess fluid dynamics plays into that
@laszloszell8753
@laszloszell8753 2 роки тому
Nice build. Just a suggestion,the water tank always have to be at highest point.
@dorfsteen
@dorfsteen 2 роки тому
Definitely worth the wait excellent workmanship and glad that you're okay. God bless you and keep them coming, if you want to put out a video of just driving that thing around I'll watch it. I love watching it that is one badass custom-built RC Corvette.😎
@tadficuscactus
@tadficuscactus 2 роки тому
Dang! This is some high level stuff.
V-TWIN Engine 4x4 RC Vehicle Conversion!
10:02
JohnnyQ90
Переглядів 564 тис.
FOUR Cylinder RC Car - Hydro Brakes, Improved Cooling & Run!
22:39
JohnnyQ90
Переглядів 2,6 млн
have you already done this?😭🙏❓
00:19
LOL
Переглядів 7 млн
Гражданская оборона 2024 - 11 полный выпуск
1:12:50
Телеканал ICTV
Переглядів 941 тис.
Making a REAL RC Engine Dyno!  - New NR200 Engine Test
12:56
JohnnyQ90
Переглядів 494 тис.
PRICIEST RC CARS! Why they're AWESOME!
8:10
kpopRC
Переглядів 177 тис.
RC V4 Car Full Brake Disc System Test!
13:02
JohnnyQ90
Переглядів 3,2 млн
Twin Supercharged 4 Cylinder Nitro RC Engine
15:44
Warped Perception
Переглядів 6 млн
Restoration Abandoned BMW M3 | Restoration and Rebuild BMW M3 Competition
23:13
RESTORATION KAMASUTRA
Переглядів 46 тис.
The World's Smallest RC Car Race!
10:19
Tomley RC
Переглядів 85 тис.
1/3 scale V10 RC car part 17, Dyno run.
8:20
Keith57000
Переглядів 2,6 млн
Can I put a REAL V8 ENGINE into a TOY CAR?
11:27
Kevin Talbot
Переглядів 2,1 млн
Владельцы AMD смеются над Intel
1:00
ITMania - Сборка ПК
Переглядів 786 тис.
I Need a Home Theater PC... NOW! - NVIDIA RTX HDR
22:09
Linus Tech Tips
Переглядів 610 тис.
Samsung Pay всё
0:34
Romancev768
Переглядів 246 тис.
Старый и новый Redmi Book Pro #xiaomi #redmibookpro
0:53
Не шарю!
Переглядів 152 тис.