How to Make a Mandalorian Helmet | EASY Trick for a Metal Finish On Your 3D Prints!

Рік тому

Welcome everyone to the long anticipated Mandalorian Helmet Tutorial!
Now some of you may already recall I made a short 2 part build series 2+ years ago about making a Mando Helmet. But it's a little dated at this point and my post-processing method has gotten significantly better!
Not only that but I've discovered an awesome way to get a BEAUTIFUL Metallic finish on props and cosplay using Graphite powder! No, I absolutely did NOT invent this method, it's just something that's been around in the community for a while now. And today I'd like to show you how I apply a "Graphite Rub" onto a Mando helmet!
Also, 95% of this video can be utilized even if you plan to paint your helmet an alternative way! Alumaluster, Duralumen, Spray Paint, etc! All these methods STILL require a smooth finish and a Glossy Black Base coat! Plus How to make a Visor, Printing Tips, etc! ALL included here!
So buckle up and let me show you the way, man!
....Wait, it's that Knuckles...?
▼ MENTIONED IN THIS VIDEO
FREE Mando Helmet - bit.ly/41MhdQM
Galactic Armory - bit.ly/3UZCnbX
Great Ape - etsy.me/3ApTmuo
Akira - bit.ly/3UVPGu6
3D Print a Mando (Old) - bit.ly/3AkjGGr
EASY Cosplay Visor - bit.ly/3UUSLKR
Amazon Cart - amzn.to/3Lw3uZj
Bambu P1P - us.store.bambulab.com/product...
▼ HELPFUL VIDEOS
How to 3D Print! | bit.ly/3EBbsNj
▼ SHOP MY CUSTOM BUILDS!
Etsy Shop | www.etsy.com/shop/FranklyBuilt
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
Frankly Built Merch | bit.ly/3AechHF
Etsy Shop | www.etsy.com/shop/FranklyBuilt
Second Channel! | / franklyreviewed
▼AFFILIATE AND DISCOUNT CODES!
CREALITY | bit.ly/3gV8iIo
☞ Visit Creality for my favorite FDM 3D printers, from entry
level to advanced!
EPAX 3D | epax3d.com?ref=25
☞ Visit EPAX 3D for my favorite resin 3D printers!
Use code “franklybuilt” for 10% off of E10 Series Resin Printer
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
AMAZON | www.amazon.com/shop/franklybuilt
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
ARTLIST | artlist.io/Frank-2384515
☞ This is the program I use to license all music in my videos!
▼TIME STAMPS
0:00 - Intro
0:00 -
Disclaimer- This video is NOT sponsored by any of the brands mentioned above or throughout this video. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
#3DPrinting #Mandalorian #Cosplay

КОМЕНТАРІ: 798

@Thatbrandonguy Рік тому

"Sand paper is cheaper than primer" - I actually hadn't thought about it that way, but that's a solid thought process! Love it

@Aaron-sj4go 7 місяців тому

I use both😂

@persenaamarini 5 місяців тому

But how much you put value on your personal time.

@jakeMTSU 5 місяців тому

my time is worth more than making this thing... I had no idea the time it takes... I 3d print all the time but never post process..

@user-gd8yr9mi5t Місяць тому

sand paper won't fill lines

@lactatinglobstr 7 місяців тому

One thing for spray cans we do in the scale modeling world is heat up a pot of water (not boiling but hot to the point you don't want your hand in it) take the pot off the stove and let the can sit in the hot water for a minute or two. Then shake it up for a good min or 2 and you should have everything mixed properly and less prone to strange paint reactions and a much finer mist of spray coming out of your spray can.

@l3xther3x86 Рік тому

The process of the graphite rub was absolutely mesmerizing to watch. So satisfying to see the silver just appear

@radish6691 Рік тому

Most concise, clear zero-to-finished tutorial I’ve seen!

@Kyl0_ben Рік тому

Have to say, your videos have been the most helpful for me when it comes to printing and finishing armor, and you’ve been a really big inspiration for me to keep getting better in this hobby!

@statesrights01 5 місяців тому

Had worked in a body shop years ago, Yeah.. your right about the paint and sanding part and yep, it takes time. What impressed me about this vid (other than the fact that the helmet looks absolutely awesome) is how you keep it simple. You give your thoughts and instructions and your too the point. Thanks so much. Just seen for the first time and I'll be looking forward to watching more.

@whytdizzle5376 Рік тому

I was brand new to printing last fall. I used your videos to print and paint two approved mando kits since then. Thanks for all the tutorials-including the pitfalls. 🤛

@ALL_OUT_NERDDOM Рік тому

Huge thank you for all your videos and recent twitch streams! Each cosplay video always has info that assists with a wide spectrum of possible projects people work on.

@slickweng Рік тому

"Don't turn this into a contest. I printed mine in 20 hours. Shut up." So glad you said it. It seems like every community has that dynamic going on. Love your work Frank, but I stay for the attitude and acceptance that you display. For orange peel, depending on your timeline, I've been able to layer just about every type of paint after giving sufficient cure time. When I say "cure" I mean CURE. Rule of thumb is to smell the piece and if it smells like paint it's not cured. If you've got the time, let it sit for a week or two before throwing another coat down and it's nearly 100% successful.

@ChozoSR388 Рік тому

Either that, or you have those gatekeeping pricks who will swat you down after finishing your first 4.5 hour print with a smug, "Four and half hours? That's NOTHING! Comeback and talk to us when you get done with a twenty-four hour print." Like, I just got this thing. Let me have my small victory!

@1937Brett 11 місяців тому

What if you used a chrome spray??

@truantray 11 місяців тому

99% of 3D printers are old fat guys in sheds that print stuff with no practical use.

@dibeme8583 11 місяців тому

@@truantray You been spying on me,,,🤔😀

@Froestenpust 7 місяців тому

@@truantray Maybe a Mandalorian helmet is practical in a shopping center during the wars at sommer sales 😁, but otherwise...

@kellyjean4981 Рік тому

Incredible job! I made a skulldog mask for my daughter and now making a Sogeking mask for my son. I’m pretty new to 3d printing and your videos are super helpful and encouraging. Thanks for all that you do!

@quintunesp Рік тому

Thanks Frank, I think this is the first video I see about grapjite powder that explains about the right order of the primer, paints, clear coats and if it is needed or not something over the powder after rub, it will help me a lot

@christophervaughn3834 Рік тому

Your videos are always so entertaining and informative, but this one in particular, i feel like your production quality has even improved as well. Great work as always

@Ivan27a6 6 місяців тому

It's great that you like these, you're so passionate and joyful about it

@milquest 10 місяців тому

Really incredible build. Thank you so much for all of the tips. I've been holding back on making my Phasma cosplay for years but that powder seems really promising.

@Roheryn05 Рік тому

Great video! I have referred back to this video as I printed and painted my Mando helmet and armor. Keep doing what you're doing. Also, I am with you on the "Shut up on how many hours it took." It's a hobby, at least to me, and it is supposed to be fun. It's not a competition. We all learn from each other, that's how it should be.

@OrwinSantaCruz Рік тому

Great video! I need to get around to making one. Just one thing I thought might be worth mentioning, when spray painting I somehow still get some paint on my hands and I hate the waste of disposable gloves. I found the nitrile dipped gloves work really well and can be reused many times (also pretty useful for doing resin print handling)

@dekopuma 7 місяців тому

That graphite rub turned out amazing. I'm printing out my first helmet right now, and if it turns out well I might have to try that method.

@coffeebreakvfx 7 місяців тому

This worked so well, I highly recommend it for a metal look! I did the black gloss underneath. But I have been told a white gloss can create a bright chrome look as well.

@BioshadowX Рік тому

Turned out great! Also love seeing how far the quality of your videos has some, the transition at 6:13 was sick

@andrewut7ya511 11 місяців тому

I like your style, great work without taking it too serious. I 3d print functional parts for work so ive never really worked with painting/finishing( if it works, its done lol) . I really didnt know prints could look as good as your helmet. Im still gonna keep mine fast and functioning but i really respect this side of printing.

@progoproductions Рік тому

Great vid and techniques! You may find mounting your parts on sticks (use double sided tape/hot glue and remove with lighter fluid) will help to spray all the crevices. Also will stop surface tension sticking parts to table, splatter from holding can at wrong angle and dry spray when spraying other bits.

@MinecraftVice23 Рік тому

love to see you promoting galactic armory, feels like the two youtubers that got me into 3d printing made a collab of some sort.

@mikedoingmikethings702 6 місяців тому

Awesome!!! I am on the next stage of getting my armor to the next level and this is exactly the tutorial I need! THANK YOU!!!

@AllocDK Рік тому

Awesome video - I also made my entire Mandalorian cosplay with graphite powder - The finish just look fantastic

@davedennis6042 Рік тому

If anyone I know gets a 3D printer and asks me for tutorials, I will send them to your channel, Frank. You are an amazing teacher.

@GreaseLightin-hr7mq Рік тому

this has promoted me to make my helmet better then ive ever made it thank you brother keep up the great work you do much love

@Coolfwip Рік тому

I have a frostmourne replica sword that ive been dreading the idea of using a metallic paint on for the blade, this made my life so much easier. Just ordered some of this powder lol

@Chilz72 9 місяців тому

You have inspired me to start 3d printing thank you so much!

@Levkin Рік тому

Great build, amazing to see the graphite powder technique out there!

@natehansen9650 Рік тому

Ive been fighting with settings for weeks, Im using your videos to help me do a dead space helmet, Its no where near the same simple shape but your videos took me from using 4 spools and a 26 day print time down to 5 days and 1.5 spools. (theres a lot of overhand layers and unavoiadable supports) Than you so much! Everything from what printer to buy (Cr10s ProV2) to how to inspect the print process before firing up the printer to how to change filament mid print.

@caustictea1918 6 місяців тому

Looks great! Really like that model too! I want to try this method of visor making on my next helmet. But side note, you actually had mentioned alternating between different paint colors while sanding before some years ago. Your the person I learned it from and it helped alot.

@arnithepanda Рік тому

I was just planning on making this! I saw your mandalorian helmet and I decided to make one too! thanks for the tutorial

@frankiepace2998 Рік тому

Awesome stuff! Thanks for taking the time to do this video. Really appreciate it 👍🏼

@blizatrex Рік тому

A beautiful finished helmet. I had that orange peal happen also on mine. I switched to all duplicolor for the gloss black and never had a problem. In the forums i had seen to after the first graphite to give it one more coat of clear (this will dull the graphite) and give it another coat of graphite to give it a little depth.

@batinthehousestudios Рік тому

This is truly the way. This video came out right when I am finished posting my mando suit and I can say that the graphite powder is so good at making stuff turn into metal just MAKE SURE to clean the helmet through before applying it. I have done all the steps Frankly Built mentions in the video and it worked great for the suit. Thanks for sharing the way.

@nixqik Рік тому

Can I ask, do you rub it into the paint once it dries? Like very light pressure and keep going until it shines? I've been testing aluminum powder on a t800 print, I just can't get it to work at all. Slightly tacky paint doesn't work and it just send to dull the drier paint.

@batinthehousestudios Рік тому

@@nixqik Yes, you rub it once the paint is dry and as you said, light pressure and use circular motion. Haven't used aluminium powder, but if you are going for a metallic look, graphite powder is the way to go.

@96rincon 7 місяців тому

Do you have a link to the graphite powder? Or where they'd have it locally? Walmart? Hobby Lobby? Harbor freight?

@Peacehawk0911 4 місяці тому

Looking forward to purchasing my first 3d printer, and working my way up to something like that. Looks amazing.

@DanielsWorkshop 7 місяців тому

This is one of my favorite videos of yours!

@A2112rush Рік тому

Thanks Frank for the awesome video! The helmet looks amazing I can’t wait to try that out!

@freddiebear2011 9 місяців тому

That's really, really awesome! A great piece of work there and looks perfect, great job 👏 I'd love to get into 3D printing and try that myself, maybe one day I can do something that awesome

@MacMan125 11 місяців тому

Awesome tutorial. Thank you so much for sharing and including your mistakes. It really helps me out a lot!

@coregeek Рік тому

Great work man. I shot my version of this video 4 years ago but never got around to editing it together! 😊 Thanks for getting it done. 👍🏻👍🏻

@buckaroosan5571 Рік тому

I always credit you for really bringing graphite to the cosplay community. Thank you forever greatful.

@coregeek Рік тому

@@buckaroosan5571 That’s kind of you to say, thank you! I just love how much the community is willing to create and share. People like Frank have really brought cosplay/printing and such to the masses.

@danielshovelheader9415 8 місяців тому

@@coregeek I'm curious about the graphite powder, does it need the black paint as a base or can it be other colors or finishes? thanks for any help!!

@coregeek 8 місяців тому

@@danielshovelheader9415 It works best with black because of the refraction being better. But white and grey sometimes works too. Results vary greatly tho.

@jaypcreations Рік тому

This helped so much thank you now I can make visors for days 👏🏾🎉

@squirralien1863 3 місяці тому

love the Graphite technique, very impressive, Thanks for the video, very nice effect.

@anmmcintyr Рік тому

Man, I just printed a Master Sword and was going to start figuring out how to make the blade look like metal and you graced me with your wisdom 😂 thanks man

@winiatacherrington6835 6 місяців тому

i absolutly love your videos, thankyou. Only just brought 3D printer a creality and that has been a journey on its own. Love love your set up and your content. :)

@LivingLambeaux Рік тому

That's one of the better graphite rub helmets I've seen!

@andrewsheffield4226 Рік тому

Very cool video, love the step by step, and even seeing the failure. I like knowing that even the streamers have errors. Thanks

@fernandoplascencia5731 Рік тому

dude am soo glad you address the orange peel problem bc i always get that and now i know why

@KyleAndersonSkates Рік тому

that graphite rub is amazing! that blew my mind watching you buff it in! I've really wanted to buy a 3D printer and start making some random props ever since I subbed to your channel lol

@AndyDeMeyer 9 місяців тому

Love the no-nonsense approach, subbed!

@redcars72 6 місяців тому

really like that metal look at the end.

@rpals5412 Рік тому

really awesome job dude! and so many great tips along the build!

@wonderboyrox Рік тому

I ordered the graphite powder and sound proof panels today. I was sitting here wondering what else I might use that graphite powder for though… and then it dawned on me. That would be perfect to use for an Iron Man Mk 2 suit! Which I have plans to make someday. Thanks for the vid, Frank. Your content is always spot on. Hope you enjoy your vacation!

@PadawanPrinter 4 місяці тому

Yeah, the sound proof foam looks like a game-changer for me. To the Amazon!

@ianmiller6449 Рік тому

That's a fantastic finish, looks great! Nicely made video too - I subscribed almost instantly 😎👍

@Christopher19990 2 місяці тому

THIS IS THE WAY! Great video. Thanks!

@keith5031 Рік тому

Love your content and also the pic with Odin Abbott and the end, so cool.

@GhostPants8012 3 місяці тому

Great job explaining everything. You earned a sub! Thank you for taking the time to make this video.

@nenovidenovic5716 7 місяців тому

Incredible video. Lots of very useful tips. Great work!

@gerardbascuguin1916 Рік тому

Beautiful work! 🤩

@odinactuall Рік тому

did this same technique on a thor love and thunder helmet and it turned out amazing!

@kevinvitale8980 9 місяців тому

Impressive material… has me inspired for other projects.

@alexrobles7744 Рік тому

thanks for the end to end. Very interesting and learned stuff regarding my bambu lab printer. Hints and tricks.. Thanks for always show us how to do it.

@AcheronKeres Рік тому

Truly amazing! That is the way!

@rpm7x7 Рік тому

Thanks man. I’ve been looking for the graphite method but it’s so pushy or rather very very recommended to become an expert painter and get the paints. Printing a helmet now!

@stricklander Рік тому

My p1p shows up Tuesday. My first FDM 3dp! This is the FIRST thing I’m doing (after benchy of course)! Thank you for this video!!!!

@nunolanca4816 Рік тому

Great work. Really satisfying to watch.

@TLMPictures101 3 місяці тому

I gotta admit you sir are a natural.

@conor418 Рік тому

I used a 2k clear coat on that same graphite powder but it took the chrome look away and it turned more of a dark gunmetal. I put another layer of graphite on top and brought back the shine

@d.c.1706 8 місяців тому

Frank, I just wanna say thanks so much for this video. I used it like a bible to help make an Isaac Clarke Helmet with the graphite finish. I took your advice on how to avoid orange peel and besides one (There always is the one annoying) piece, I had no orange peel. You're the GOAT, without you I would have never known what to do as this was my first helmet.

@kylejobs-yr1df Рік тому

This video. This is the way. Awesome job love the video. Keep it up.

@thedarkknight803able Рік тому

Thank you for this video. I know I take my time when sanding and applying my spray paints thank you for the Tips.

@sithinstructor Рік тому

The black mesh in office supplies, like trash cans and pencil holders, is a great way to block the view of your face/eyes. Cut it to the same shape of the visor and attach it under. You can see through it fine, cause it is right next to your eyes, but it blocks light enough that even a camera flash won't expose your face.

@fluxphage Рік тому

over at mmcc they use welding visors!

@prestons6876 6 місяців тому

Another good option, using the same approach as he did is 5% ceramic one way tint. Ceramic tint gives the ability to see out while others can’t see in. It is a bit more costly though.

@mikemccabe2758 Рік тому

That is a great Mando helmet,thanks again

@quassisbelltower9408 Рік тому

thank you for the video. i will be saving this video so when i get to print my helmet, this will be the video i go to. thank you again

@simplybabette 6 місяців тому

WAIT!! SHIBA!!!! I have 2 of them haha love the whole effect of this helmet I am doing helmets now and low and behold out pops a shiba!! love them! thanks for the helpful hints!

@chino1moreno Рік тому

Awesome video man! Love the process

@Irich1961 10 місяців тому

That looks friggin awesome. I just finished printing up my Mando helmet and that finish will be perfect.. Thank you very much.. :o)

@lsdave 7 місяців тому

Awesome Video! I;ve use pre tinted replacement face shields as visors for cosplay masks.

@lambcurry1yt417 Рік тому

I find using adaptive layer height is so good for making prints take so much less sanding

@Phizixx Рік тому

It’s time I make one Incredible work man it’s so nice

@tattoobill3850 Рік тому

Your my favorite bro you make the best 3d print videos thanks for getting me into it

@candyfsshh Рік тому

This is the best 3d printing channel. ever.

@WernerKaffl Рік тому

I love that video!!! Re paint, I ran into the same issues re peeling. Most of the time it's simply the new layer attacking the older layer (solvent dissolves part of the prior layer). That does happen a lot with spraypaint. Since I'm doing a lot of "making", I decided at one point to get a decent compressor and spraygun (both together was some 250 NZ Dollar). And lo and behold, never had this issue again (my thinner of choice being acetone which also reduces curing time by up to 50%). Nice side effect, paint comes considerably cheaper than spraycans in the long run. I also used graphite for my prop swords, prop guns etc. You can get some pretty good finish, close to chrome, depending how good the underlaying paint job is.

@LCyte88 7 місяців тому

Thank you so much for these videos I follow you everywhere

@le_rob_1 Рік тому

Great video ! I'm happy to know that if the graphite fades away, it's normal. I thought I was doing it wrong 😁

@hansencustomcreations5355 Рік тому

Time Stamp 9:43tomato potato love it I watched this with my wife in the back she thought it was funnny . Awesome work thanks for the great videos Frank 👍👍🇨🇦

@michaelauman2501 Рік тому

Great video. Thanks for making this!

@WalterAlvesTaokey 7 місяців тому

Very, very, very nice!

@gordontarpley Рік тому

Looks fantastic!

@Oscar-rv8qq 8 місяців тому

I enjoyed your video it explains a lot you really went into a lot thx for the info

@zsavage1820 7 місяців тому

Some amazing work brother... love this video...

@adamward2175 22 дні тому

Awesome! That’s it, simply fricken awesome.

@sancayakbulut3215 4 місяці тому

That helmet look amazing👍

@Jocker141414 Рік тому

Good job, that's a clean helmet!

@paulriggs42 4 місяці тому

Amazing results !

@camtron1967 Рік тому

That thumbnail looks great. Probably because I helped yesterday. But seriously that helmet looks absolutely amazing

@Djexoticdancing69 3 місяці тому

Great job bro gotta show this to my son awesome job👍👍👍👍👍

@kaptain113 6 місяців тому

What a great video. Nice work!

@danielstone7707 5 місяців тому

Thank you for this video. I have no idea how many cans of “silver” spray paint I’ve looked at over the last week but nothing matches the mando look now I’ve ordered some graphite rub and I’m good to go. You sir are a hero and should wear a cape 😜🤣🤣

@Terreos Рік тому

5:43 Legend. Aweseome video btw. Still waiting for the Elegoo Max to come back into stock so I can start printing helmets in one piece. This will be very helpful once it does.