Nice vid

yeah

On Safety Third I remember you mentioning what a pain these 2 strokes are...and you're right! That's why most RC guys do electric now...but you CAN get little 4-strokes that run on gasoline! (though any time I saw guys running them, they were much bigger displacement)

Now how long is one week, Kevin

Dude you and Sandra Please make more videos you are my favorite youtuber

"I'm a car guy"

Just like: i tried the other ones but they just don’t work all that great so I thought of that and it works great my dentist said I have absolutely no plaque buildup at all…. Also said I have 1 percent of enamel left on my teeth but I ignore that tho

Cyberpunk 2077:

So down for this lmfao

Tank of two stroke fuel and oil next to the tooth paste

@@Stevie-J cringey

Did you know that 3 out of every 4 comments are bots?

did you know that electroboom made a bleeding mouth joke using a milk churner thing and a toothbrush?

"To shreds, you say?"

Rip and tear

Yeah..... as a kid that got many Cox control line planes as gifts being bit from a .049 engine hurt like h3ll and drew blood even with a light strike. That thing he has would remove fingers. I remember in the Bellevue Morgue museum in the late 80's they had a plane on display that was the cause of death along with many other oddities.

@@eldiablo7862 Not a newly discussed death, either. Even Hitchcock's movie "Shadow of a Doubt" (1943) mentions a suspect dying by propeller blades.

You can lose fingers (or at least pieces of fingers) to regular electric powered props, this thing would probably tear a chunk out of your hand at the same time...

@@101VoltsI've seen a dude walk into them in the service and it wasn't pretty.

Would that glove really help him much? I think his finger would still be broken

seriously??? inside the house? amazing you are still alive...

@@bunnykiller this is a joke

@@bigboi9856 doesn’t get any more gullible than that lmao

@@abovegroundgarage You say that, but I _guarantee_ you that someone has actually done that.

@@somdudewillson Knowing the "Just Rolled In" channel, that certainly sounds like it could have happened.

@Hank Miller you get the point dude

You d2nm right!!! ARE WE NOT MAN,AREEE WEEE NOT MENNNaaaaah🤣🤣🤣🤣🤣

Vincent "Local Florida man fights the fight of Climate Change."

I mean....yes.

I’m almost thinking he’s a car guy

@J U S T I N 🤍 what

Praise “BOB”

Steam-powered?! When were those introduced? I ain't ever heard of them. I'm still using horse-drawn toothbrushes.

@J U S T I N 🤍 your mom

@J U S T I N 🤍 wtf..

That poor woman 😂

I came here for this comment.

Next trip: Hospital Burn Ward

@@themadasshatter1088 So did she...

@@Chad_Thundercock nice word play.

9 out of 10 william osmans would be disappointed to see this comment

Did you know that 3 out of every 4 comments are bots?

@@tadadoterson6147 report them, hopefully they will get removed.

@@derkeksinator17 hopefully

William Osman want to know your location.

2HP=1492 Watts

there are lots of losses generating ac power and then converting it to DC.

The quoted power output on RC engines tends to be hella overrated.

I doubt its 2hp even most mopped have that much and this thing can get no way near the power of a 50cc engine

@@ES-xq7iu a 50cc 2 stroke engine on a moped would probably have about 5 hp, also nitro fuel is very energy dense.

pretty sure, if you get 5 mio subscribers, your girl is going to be fine with it too :)

Misted

Vaporised

Deleted

Disintegrated

What carrots?

Officially underrated 👆

"The teeth dentist" what else would a dentist be a lawyer?

@@thfilmsproduction7003 he said the tenth dentist

@@thfilmsproduction7003 I also read it as this too, but it says 'tenth'. Any dentist who refers to themselves as a Teeth Dentist makes me question why the felt the need to add that!

The tenth dentist is the one from Little Shop Of Horrors.

Yeah the gloves he had in weren’t going to do anything

same, those gloves make me feel more anxiety

The only thing that would really work is holding the vegetables with something else, like vice grips.

Every single time I watch this video it makes me toes curl. He gets SO CLOSE 😅

Um, are you aware you can regrow fingers using the e621 compound developed by the US Department Of Genetics? For mor info google "DOG e621"

Every prop driven plane ever:

Watch a person walk into a plane engine prop...

Correction “Hold my highly explosive rocket powered flamethrower”

"Objective: attach a toothbrush to an RC engine"

Kevin Talbot?

The answer is yes.

Very lucky I'd say

Its probably a whole lot of both

Thanks to thousands of people like you this man is immortal

I’m curious. When you weirdos say “you’re in my prayers” do you actually pray for these people or is it just BS talk like your religion?

and i hear that to cut a carrot you need to aply the same force that to cut a finger 😳

@@skankhunt-fr5qf not true

@@skankhunt-fr5qf one misbite and your finger's gone

@@skankhunt-fr5qf bones stronger than steel so carrot would be stronger than steel

@@reizinhodojogo3956 he does not mean the bones he means the flesh of your finger

🤣

How did you comment then?

big willie

@@nathanline2523 he resurrected

@@kandy5129 yeah, cause he had not yet finished laughing

Sounds like a cat

Sounds like a cat

"Through all of those celery, all of that carrots" triggered me

@@IzaakHagy THANK YOU! But then, my sentence structure is terrible while on camera so...

Yeah, some how i doubt that his leather glove would have saved his finger tips there. And the gaming part, was just 50cm away from certain death ....

Helicopters have clutches though so you'll be alright. You wouldn't be able to start it safely otherwise. I used to fly the quarter scale nitro planes years ago before everyone was coming out with electric. Anyways, the glo plug I was using then was attached to a battery box via wires. The prop almost sucked the wires in and I tried to grab it before it did. Good news is that I did manage to. The bad news was that I pulled just slightly through the top because I didn't pull up high enough and almost lost my finger. Honestly starting a Helicopter is a lot safer than those damn planes. I've been wanting to get back into it again and maybe switch to the nitro helicopters but I just don't have the money for it right now.

@@Onyx_Games I used to fly control line planes with my dad when i was a kid (like 8-12 yo) and we used the little os nitro engines like these. I def got kickbacked while starting a bunch and I had a wood prop break on my knuckle. Neither of us ever had serious injuries though thankfully, using wood props probably made a huge difference in danger. (I could be wrong, idk it was a long time ago and just speculating)

Hes obviously never seen a prop induced injury lol... also leaving that glow ignitor on there like that is making me cringe lol

I can comfirm, plane propeller plus finger equals a bad day.

It literally did not delete them from existence. All of them are still right there on the wall.

Did you know that 3 out of every 4 comments are bots?

@@tadadoterson6147 *sigh* I know, you can't comment on a moderately big channel without the bots

@@S85B50Engine someone should make a bot to respond other bots with the worst insults you can think of

@@tadadoterson6147 you’re starting to look like a bot if you keep commenting the same thing

Pretty sure it was out of fuel at that point in time

Thats just rule number 1 with nitro motors with props, if the glow starter is on, treat it like it is running.

>:(I just want you to be a good person

@@alexyochum5648 I don't think that rule is going to do much in his case. He thinks a thin gardening glove is going to protect his hand with it at full bore throttle. LMFAO

@@ggfleadguitar14 Im pretty sure too, but would you take that chance...? He also stopped the prop with a carrot. Probably not out of gas then.

I really wanna make a propeller plane using one of these.

The audio when he played halo 🤣🤣🤣🤣🤣🤣🤣🤣

@@Texasmule Random question from a random Me: Want some science-youtuber's names to check out? Want some Recommendation from a fellow science-enthusiast?

it's the main reason i wanna get a compressed air motor

@sourand jaded why?

@sourand jaded you mean you don't like wood/metal confetti??? CHICKEN

@sourand jaded use it to clean the mill daily

Really wanted one tô clean my beard trimmer

Nice channel name 😎

@@TheBackyardScientist i’m gas powered

@@TheBackyardScientist same to you. 😎😉

g a s p o w e r e d i n d u c t i o n h e a t e r

@@TheBackyardScientist gonna create a massive water vortex

Could imagine someone having that in their office, what all the co-workers would think. "What the hell is that noise?" "Oh Jim's just sharpening his pencil."

@@quillmaurer6563 I think it's more or less just to have it there. I don't think it would get used too often 😂

@@fast79z28camaro True, but what's the fun in that? I could see it being especially useful if a nearby co-worker is too overzealous with their electric pencil sharpener, seems like they use it annoyingly often and long, they aren't as loud as a nitro engine but still somewhat noisy, fire back with this.

@@quillmaurer6563 I have thought about using the big brushless motor from xmaxx to build a pencil sharpener. It's like 30 volts and monstrous. Makes a 20 lb 4wd rc car go 50 mph.... Ought to sharpen a pencil right quick.

Smallant could almost do that by hand smh

Wait, the latter is a rule?

@@Electric_Bagpipes not that I was aware of, I usually do it every other weekend!

I knocked my fingers once starting it like that. It started before I even fully turned i,t and it spun around and hit me right on my knuckle. i got a little bruise but it didn't break the skin. after that I wore gloves lol.

@@TheBackyardScientist I'm glad you did not get seriously hurt. I'd hate for anything to hinder you making more awesome content!

No, no, I have no problem with flick starting. It's been done since the start of time and if it goes wrong, it usually just means a bit of a sore finger. I have a problem with the demonstration itself and his entire lack of safety or thought on anything he did. To add: It's a fine demonstration, but it should be done by someone who at least has a single clue and done for the purposes of demonstration. NOT "for fun" - Because it's a very dangerous way to have a bit of destructive fun and a dangerous thing to implicitly encourage. Not a single squeak about any kind of safety was given at all.

WWI veterans are rolling in their graves

Seriously you safety people are ridiculous. Don't drive a car then. Everything is dangerous. Worry more about cancer or heart disease or old age. Those are the biggest killers.

@@Misha-dr9rh on rc jets they are

@@Misha-dr9rh nice anime pfp clown 🤡

@@PastorWisky yes thank you

@@Misha-dr9rh Check out my UKposts Channel. Then come back and tell me that EDFs aren’t used on RC jets.

@@Misha-dr9rh Way to enforce the "Anime PFP=invalid opinion" stereotype

I can't pay my electric bi-

Here before this comment blows up

electric boogaloo

thats perfect

Yep classic RC nitro engine

i didnt ask for all that brodie

@@zero-se7ug I did

nice

@@zero-se7ug yeah that's cuz i did not everything is about you

@@saple3688 i didnt ask for all that brodie

@RCSparks: Correct. Also, I have been watching your YT channel since 2016. When you said you were leaving youtube I was so sad. But your back so I am happy to see posts to watch when I get home from school.

You are right but I couldn't keep that airplane nitro engine running without it. I read that means I was running it too rich but even messing with the carburetor it would always shut off and bog down when I took it off.

@@TheBackyardScientist My time to shine .. I collect those things. For a two-needle carburetor, you start on the setting in the manual, which tends to be on the rich side. If you don't have one, something around 1.5-3 turns open is usually fine. Now it depends on whether the engine is new, if it is, you have to break it in first (not only to make it last longer, many, especially cheaper on, won't run right before you did that for a few tanks). How to do that depends on the material combination of the piston and cylinder. You won't encounter cast iron pistons in new engines, so I don't talk about them now. Richen the mixture until it is jumping between two-stroking and four-stroking (you clearly hear it), then lean it until it just runs smooth again ..(especially for ABC-engines) DON'T run them too rich. They need to get to and hold normal operating temperature for a while. After a few tanks you can set them up correctly. Lean them to peak RPM and then back up (in direction of rich) 2-3 clicks on the needle valve. For the idle setting, you can do the "pinch-test". Pinch the fuel line with your fingers and look what it does. If it just stops, it is too lean, if it runs quite a while and speeds up during this time, it's too rich (because while it's starving of fuel the mixture becomes correct for a while). You want it to speed up just a bit and then stop. The idle speed should be set in a way that you can leave it running for 30s or so and then give it full throttle, it should speed up without much struggling (a little bit is normal). The rest is practice, you need to FEEL what the engine needs. I'm still not perfect with it, but you get better.

@@VintageTechFan yes, finicky little monsters, but once you do get it running right..., they will scream. Their power band often starts in the 10 thousand range, and they redline at 25k-35k rpms, which explains why they're so powerful. With a very energy-dense fuel and a power stroke every rotation, coupled with high rpms these things can be very powerful. Their torque is abysmal though.

@@TheBackyardScientist was it an old glow plug maybe?

Long story…

I’ve finally found it. An unnoticed comment from you. Hehe my time has come GWA GWA GWA GWA GWA GWA GWA GWA GWA GWA GWA GWA GWA GWA GWA GWA GWA GWA GWA GWA

Hmm one must know how have you done this

Drank too much Radithor

Happened to my buddy Eric once kinda ashamed he blatantly stole his idea and didn't even credit him.

I was having such a bad day and thought the exact same thing

same

Same. Group hug guys

Group hug from me.

If that makes your problems better, then I want your problems.

He's kind of like Florida Man with a PhD.

As an Arizonian I fully agree

Where electricity comes from?

@@martonbalogh6021 from the thin air

@Hellequin Maskharat Among?

@@NCG337 don't do this to me.

Guys there’s someone in electrical

It's not that simple with electric motors to save the environment but I'll just roll with the meme

Switching to EVs isn't going to help anything. If they found other ways to go green then there would be no need to get rid of ICEs.

Classic cars are better

@@classiccarfanatic They are better. New cars are garbage.

@@JordanSVT new cars try to be better but end up breaking down more

well the scaling actually gives it a disadvantage, because it has x^3 as much stuff to work with, to turn x of a shaft

The square cube law makes comparisons like this difficult to make sensibly, because mass scales with the cube of the length if the length scales linearly. That's why smaller things are easier to make stronger or more powerful (for example ants can carry a hundred times their own weight, or toy cars can easily survive being thrown into a wall, or this engine is super powerful). If you scaled an ant up to human size, it literally wouldn't be able to carry its own weight because its limbs would be so weak.

@@vurpo7080 what? why would an ants limbs support it at all if they wouldn't scaled up? makes no sense. it's limbs would scale up with it?? and they already support the ant.....

​@ct9850 the square cube law is why there's no rhino sized ants

​​@@ct9850the ant would be much heavier proportionate to the size. As the dimensions of an object increase the size increases exponentially. This is why a 1ft cube is only 1/8 the size of a 2ft cube

sometimes they do that cuz they already preprepared the boxes and its a hassle to unpack and send the items back due to shipping costs. its annoying but it makes sense.

@@cersan445 bro the supermarket is already stocked but I'd be pi$$ed if they tried to charge me for not buying their stuff, a business should factor in storage and stuff, you haven't custom ordered items then cancelled

@@chrisp.lettuce8900 the whole purpose of the store is CUSTOMISING YOUR ITEMS. They use some algorithm to make ur box. I still agree tho I would be mad.

@@cersan445 my understanding is they have theme boxes, the algorithm just recommends which themes would suit your interests, neither the contents of the boxes or the items themselves are custom made. There is no way you'll justify them charging to not send items out

@@chrisp.lettuce8900 they have theme boxes you can swap out if you dont like your custom box, but they actually make you a custom box. Thats why most companies would charge you a fee to cancel.

The gas powered toothbrush for me. I need one.

Hey Joel, might as well make a gas powered toothpaste dispenser and suck upper

Ayyyy! Thanks for the shout out Joel! By the way, I just hit 1000 Subscribers today! So freaking pumped!!

I just did, and it was great 👍

In the movie, Naked Gun OJ uses one of these little motors to power something... But I can't remember. 🤔

@@calamariari2004 my username exists for people like you

⬆️ that bot really agrees with you

So which video had to be taken down? And what was in it?????

Thanks for the tips👍 that airplane engine would not run without the glow starter in it, i read it means the engine is running too rich but i could never get that engine tuned right. And i was aware there was a possibility of the prop exploding so i wore glasses when i was testing it. This was my first time using nitro engines and i really like them, i want to build an RC car now :D

Nothing to do with pulses in power delivery. It's just plain rippems.

UnitSe7en The power graph of an erpem of one of these has a distinct peak and most of the power is produced during 90 of its 360 degree rotation. Props have to be built to survive it. Reduction drives to a larger diameter prop is safer and far more efficient than direct drive, and the prop does't have to be as thick & heavy, relatively speaking.

Starts glowing blue

I felt the same way, seen some things I wish I didn't at the field! Got way too nervous watching him get that close to the prop

It disintegrated them lmao

I've heard that carrots are similar in strength to human fingers, so no doubt his fingers would have been vaporized just like the vegetables.

@@Roach_Dogg_JR First thing in my mind watching that clip was "HOLD IT WITH A TOOL NOT YOUR FINGERS"

or just... burn the fuel to directly make heat.

The HPC did that with an angle grinder.

Love topgear Simple as

I would like a V8 powered camera. I wonder what frame rate it could do?