In this video I go over everything you need to know to get started in resin 3d printing. I cover the technology, picking out a printer, picking our resin, safety, slicing, printing, and cleaning.
Thanks to all my subscribers for your support. Commenting on the videos is one of the best things you can do to help grow my channel. So thanks again for all your support.
This video does show products and affiliate links are below. That means I get a small comission if you buy using one of those links. But these tiny comissions do help keep this channel going. So please use them and share them. Thanks!
This video was sponsored by Nova3D and they provided the Elphin 2 printer shown in this video.
The printer is here: amzn.to/2PRfj1E
HOWEVER that printer doesn't seem to be available any longer. I'd look at this one instead: amzn.to/309s7pJ
This video is also sponsored by Yousu, and they provided the resin.
You can buy the resin here: amzn.to/2PQspfz
Other affiliate links to get all the stuff you see in the video. Using these links helps support my channel. So it really helps me if you use these links when sharing these items also.
This is that amazing deal on the plastic sheeting. Notice that all the other roll sizes are more like $20-$30. But this one is only $5: amzn.to/3dxTT1M
Plastic Food Trays - 12 count of 12x16: amzn.to/2OnNMVe
(There are some 10x14 ones that are cheaper. But the bigger ones are better for 3d printing)
The rubber mats as seen in the resin handling video- amzn.to/3pmhfws
(I normally use both and put the rubber mats on the food trays)
Metal Funnels - amzn.to/39ZU56y
IPA - amzn.to/2T0uFzS
Spray Bottles - amzn.to/2T2q7t2
Nitrile Gloves - amzn.to/2Tm6T0c
My Mask - amzn.to/3cgvWL5
UV Lamp - amzn.to/3fMfDts
And this is the other resin I use, Siraya Tech: amzn.to/3kln4qe
Here is my favorite Atari Hat: amzn.to/3mhoW5Z
Here is the hat I'm wearing in this video: amzn.to/3fLdHkT
These are not the exact ones from the video but look pretty good:
Metal Scraper: amzn.to/3fIenYq
Safety Glasses: amzn.to/39HbZ08
I also want to thank Formlabs for being gracious and allowing me to use some of their footage for this video. For more information about Formlabs printers go here: formlabs.com/3d-printers/form-3/