Great tutorial, thanks man 👍

Thanks so much for this man!

Thanks!!! Great tutorial!

awesome tutorial mate

hi, great video! you are using the phone to control the rover. can you do it the other way round, meaning using say a button/sensor on the arduino side to control the phone instead, like taking a photo by triggering the phone camera.

Finally an application that can connect to hm module

Thanks for this video! stopped keeps printing from the else statement, but the the serial monitor printing "forward" doesn't happen when I press the forward button on the graphical controller. The Arduino Uno and Dabble are connected with an hm-10 bluetooth module. Could you point me in the right direction to troubleshoot this? Thanks!

Hey man! I want to make car with one back motor and front stering with servo. Can i make the "analog" stering for this vehicle with this app and bt module?

Hey first of all great video, I AM USING ARDUINO MEGA, it was only showing stopped in the serial monitor in every command(or cammands are not being getted by arduino) what can I do, please help me

Great video! I have done this same thing but when I press the buttons on the dabble app(on iPhone) it doesn’t print it out on the serial monitor. The baud rate is 250000. Can someone help me please??

If we dont want to use an app can we just pair with a BLE sending sensor?

awesome thanks

Thanks a lot

Does hm10 support audio

How to controll an eletric scooter with the bluetooth which app because dabble connects but doesnt have jolt scooter or any scooter

dable is not available anymore on apple do you have a other app that works the same way?

Heey. i tried to update my cc41 and it didnt come out of a wait screen. it was showing up on the scanners but now it doesn't show up but the led blinks. What do I do? I can't find you with any app

Does anyone know how to pair a PS4 controller to the Arduino friendly HM--10 BLE module/? Share+Logo doesnt work

Your website shows you connecting a HC-05 straight to the Arduino pins. I thought the RX TX were only 3.3v tolerant? On UKposts you are showing a HC-10 where the RX TX are 5v tolerant.

why do you set the BAUD_RATE to 250000 instead of 9600?

Where in your code do you make the digital pins assigned to TX and RX?

nice but i need help, becouse it didnt even blin an led , i do something wrong... can you show the code for it? thx!

What if bt05 isn’t there. Mine says dsd tech

Hi. Thanks for the tutorial. I have a problem with the Dabble app. The LED brightness program and the Terminal program work perfectly but opening the gamepad I just get a blank pad,(no buttons). I am using an iPhone6 with iOS14 software. Anyone else having this problem?

5:28 no resistors to divide the voltage on the RX?

Everything works fine until Monitoring..All I get is "Stopped". Checked wiring,it's good. Any ideas?

Hey bro, My Bluetooth HM-10 module not going to pairing mode. So, that am able to pair it directly to mobile phone. It in AT Mode So, How can I put it to Pairing Mode. IF WE USE ANY APP FOR PAIRING THAN IT PAIR EASILY BUT. I WANT TO PAIR IT DIRECTLY WITH THE MOBILE BLUETOOTH. PLEASE HELP ME TO CURE THESE PROBLEM.

I followed all the steps but when I open the serial monitor I see stopped but cannot get forward, backwards, left or right? you did not say what to do if that is not working on your tutorial.

Is their a code?

Apk link????

I realized a serious issue with HM-10. while it is connected, IDE gives a port error code. it is because TX and RX are busy. I have no idea how to solve it.

Hi. The HM-10 pin's are D2 and D3, but enR same D3. I am confused.

I can’t connect to it i have iphone

I have tried the HC-05 and now the HM-10, I can sent data to it from android no problem. But I can't receive data, and that's what my project is all about so I am stuck! EDIT: Problem solved. Do not use an Arduino clone with Chip removed as a USB to Serial converter to talk to the HC-05, the serial data is not pulled all the way to the ground and for some reason, the data isn't picked up by the HC-05, Use a converter made for the job such as the FTDI232 and your good!

I started to hate BLE xD I know, its actually easy to use DABBLE, but I wanted to create an own app with unity to controll the arduino, using XBOX Gamepads etc... and that where the problems start. Cant use BLE on Windows so developing gets hard and annoying.

25 dollar shipping is this coming from the moon?

If you have an Arduino and literally showed it to us, why didn't you just use it for this project? Makes the title *extra* misleading.

Please! edit out those awful swallowing sounds! or have the mic farther away from your neck it's terrrrriible! Otherwise, great video!

the code: #define CUSTOM_SETTINGS #define INCLUDE_GAMEPAD_MODULE #include int enR = 3; int inAR = 4; int inBR = 5; int enL = 10; int inAL = 11; int inBL = 12; void setup() { pinMode(enR, OUTPUT); pinMode(inAR, OUTPUT); pinMode(inBR, OUTPUT); pinMode(enL, OUTPUT); pinMode(inAL, OUTPUT); pinMode(inBL, OUTPUT); Serial.begin(250000); Dabble.begin(9600); } void loop() { Dabble.processInput(); if (GamePad.isUpPressed()) { Serial.printIn("Forward"); analogWrite(enR, 255); digitalWrite(inAR, LOW) digitalWrite(inBR, HIGH) analogWrite(enL, 255); digitalWrite(inAL, LOW) digitalWrite(inBL, HIGH) } else if (GamePad.isDownPressed()) { Serial.printIn("Backward"); analogWrite(enR, 255); digitalWrite(inAR, HIGH) digitalWrite(inBR, LOW) analogWrite(enL, 255); digitalWrite(inAL, HIGH) digitalWrite(inBL, LOW) } else if (GamePad.isLeftPressed()) { Serial.printIn("Left"); analogWrite(enR, 255); digitalWrite(inAR, LOW) digitalWrite(inBR, HIGH) analogWrite(enL, 255); digitalWrite(inAL, HIGH) digitalWrite(inBL, LOW) } else if (GamePad.isRightPressed()) { Serial.printIn("Right"); analogWrite(enR, 255); digitalWrite(inAR, HIGH) digitalWrite(inBR, LOW) analogWrite(enL, 255); digitalWrite(inAL, LOW) digitalWrite(inBL, HIGH) } else { Serial.printIn("Stopped"); analogWrite(enR, 0); digitalWrite(inAR, LOW) digitalWrite(inBR, LOW) analogWrite(enL, 0); digitalWrite(inAL, LOW) digitalWrite(inBL, LOW) } }