Terimksh infonya sobat

너의수익을 저분들에게 드려라 도둑놈아

Hello I'm in South Africa Cape Town I would like to know what ur price of ur boots

Hello price please

Hello! How can I contact the production manager?

How much do you think a pair of boots like that go for? Is there anything comparable in the western US?

@@toddkawana7171 Limmer in New Hampshire makes custom hiking boots and they also have an "off the shelf" line with their specs but made in Germany by Meindl cost for the off the shelf runs 400-500 usd imo they are worth it...all leather except for the outsole. Also their are boot and shoe makers in the pnw mainly Seattle who make custom and handmade boots...Whites, Franks, Nicks and JK boots. Their is a maker in BC Canada as well but I forget the name.

I bet a pair of these are like a Lamborghini for your feet.

Hello, thanks for your comment, very enlighting on the matter. I wanted to ask you something, related to the use of membranes (Gore, event, etc) in leather shoes. I'm mountain guide since 2010 and I've been using boots since i was 4, through all the boyscout era and so on, and I always experienced the same problem with membrane+leather boots: it always ends up leaking hard, and after this happens it never dries during a route. Specially in snow environment it's awful. I've been 15 days in Norway with the best and most expensive Perwanger reinforced boots i found in the market (not gonna say the brand for respect), and from the third day I was wet. And its not bad luck. Thst was the turning point. Then, I started to use non leather boots, basically Kevlar, Schoeller and similar outer shells, and that was a revelation for me. Never again wet feet. Its true they need more reinforcement in the sides but yet they're super light and flexible, still last a lot, and they don't leak at all. So i stopped using leather+membrane shoes. Then I gave a try to a only leather boot pair, but greased them up as I heard that was the old times solution, and it worked. As my feet don't sweat too much, and i use the best wool and silk socks i can find, and actually they work great too, yet i use them for heavy duty, not for trekking. Therefore, I arrived to the conclusion that putting a membrane to a leather shoe is a marketing mistake. It's no sense, as a membrane cannot breath trough a soaked piece of leather glued to it, and it just becomes a water bridge. However, synthetic materials don't soak as leather, and they just let the membrane breathe while protecting it from harms (as intended). Can you relate to this? Thank you a lot and sorry for long comment.

In my over 4 decades of selling (and repairing) boots I've seen the membrane type boots proliferate. They most definitely do not breathe as well as straight leather I'd say. If you can find waterproof sealed seam (they have a line on the backside wherever sewn of something called silastic adhesive to seal stitch holes) constructed boots like the Wolverine WO3226 they breathe much better. After Gore-Tex came off patent the whole internal waterproof bootie thing ran amok. Some generic booties don't even actually work and all can trap moisture between the leather and the membrane. Corura and Kevlar woven upper boots actually breathe better than internal bootie boots. The reason they repel water is that they have a felt based hydrophobic backing and used the sealed seam construction where the textile uppers are sewn. The negative side is now days if you can find these they often also use a membrane bootie liner as well. They don't really have to have it save for it's a marketing thing. The best one I sold is long since discontinued by Rocky Boot Company.@@bassegoder

Same, lol... Very hypnotizing. Now I want a pair

Yeah. Me three. This was a calming break from the political apocalyptic nonsense. It's nice to know there's still beauty in this world.

I was thinking the same. I have a really hard time finding leather shoes that are comfortable. I would gladly pay these guys for a pair.

Yes

@@azynkron jk boots

Likewise I did however speed it up.

look up Lee Miller cowboy boots. He goes 10 times deeper, at least, than this production.

My thoughts exactly

I am with you, @Razorel. I would love a pair. ;-)

Same here

Question so with the application this shoe is made for would you have also used nails in the heel ? Or is the glue and stitches enough to hold that together?

what do you mean stitch out construction without a stitcher, isn't this the usual Goodyear welt?

Do you make custom hiking boots? I have been looking for a pair but can’t seem to find any in the States.

@@toobalkain forgive any inaccuracies as i am not a shoemaker. See the videos by Siroeno Yosui, he does incredible goodyear shoes with a blind stitch. The goodyear has a seperate leather welt stitched to the midsole and through the upper. The outsole is then stitched to the welt. The stitch-down construction here has the welt ibeing the splayed out upper. I don't know whether either is particularly stronger per se. Goodyears like that done by Yosui seem much more time consuming than the boots made here. EIther way its awesome stuff.

I'm a stoner in Australia and I really enjoyed it too

Одноразовая обувь в городских условиях развалится швы будут течь

@@samarer2363 на видео замазывают клеем нежалея, может пропитка поможет, да и как я понял это для тяжелого трекинга, по крайней мере в поисковике я такое печатал

​@@samarer2363не п*ди. Очень качественная обувь.

My hands are your hands, his hands not our hands 💋

а мобилизация вдруг отуда ни возмись ?

@@user-fi2pi7kz7e вот на Памир и свалит )

@@iezuit197 уж лучше на памир, чем бессмысленно в жерло вулкана прыгать!

Много ручной работы есть, которая завораживает. Эта не исключение. Я хотел бы иметь такую обувь, но думаю мой бюджет не потянет

@@user-fi2pi7kz7e так за эту обувь тебя свои же и пристрелят

Я бы сказал, что можно стать швеёй за 2 месяца курсов, но профессиональным портным, с таким подходом, - никогда. Что за изобретательство измерений??

забавно..и что купишь такие?..)))🤣 тапочки видимо делаются для прогулки пенсионерам у которых пенсия 15 тыс..рубликов..))

@@user-dq4pe2dt1n что вам до пенсии людей? Кто-то вам и людям чем-то обязан? Жизнь это не детский сад до 90 лет.

@@cinemaverite2179 признак пенсии тоже пенсия ? засекай !

@@88vok въяб ывай как конь и будет большая пенсия. Тут прямая зависимость.

I don't wear hiking boots. But I appreciate well-made good-fitting work boots. I've got to wear them almost every day, 40-50 hour weeks. While standing on hard concrete, sometimes in heavy rain puddles, often pushing and pulling and lifting and carrying objects which weigh almost as much as I do. A lot of load on my feet. Cheap boots and bad boots will usually still last months. But paying extra for quality boots really adds a lot to your comfort, attitude, and energy during and after days of work. People in construction, manufacturing, or industry who have junk boots are new and inexperienced, or just can't afford better, or simply don't do any real work.

its more efficient to get custom inserts tbh.

@@pwnmeisterageI work in the oil and gas field, out on production sites. Constant walking back and forth with steel toes has torn up my big and little toes. I wear some non compliant boots whenever I can get away with it because my feet get so swollen from all the walking. Know any good manufacturers that do women’s sizes?

@@angelinimartini I've heard your complaint from several women I've worked with. Apparently women's work boots suck, or just have limited options which aren't the best for everybody. They look cute and feminine but they don't look comfortable. (I don't know firsthand since I don't wear women's boots, lol.) I guess it's a market opportunity for boot makers? If "one size fits most" doesn't fit you then you might have to have custom-fit boots made for you. I think it's worth paying the $$-$$$ extra for comfort and happiness. Good fit, no sore feet at the end of the day, no limpy pain, no blisters, no chafing. Other people think it's not worth spending more, I guess saving/spending the money for other things makes them happy.

@@angelinimartini In Germany I would recommend Engelbert&Strauss. I have work shoes from them that I could wear for a hike at any time. Super comfortable. Just a bit worn in the meantime. . .

@@TheDogGoesWoof69 I'm not seeing any slave labor conditions in this video.

see how old they are? they pretty much spent their whole life making shoes off course they posses incredible precision and skill.

@@TheDogGoesWoof69 Most of their stuff is automated in a factory, with only things such as the stitching which is done manually

Pfff

@@TheDogGoesWoof69 nike didn't do slave labour but the cost of labour is really low. They also had a stint of doing child labour so not that much better. However, the ones you see on shelves are mass produced. They basically have it all automated by machine and some parts are still done by hand, but 90% is done by machine. you can watch vans production video off youtube. just search it.

exactly what I was wondering.

And why no one else asks it?

Same. I kept seeing those nails tacked through the soles into the form and wondered how that was going to be handled.

I guess they are factory made in multiple sizes. And the extracting part seems fairly easy, as they aren’t glued nor nailed to the shoe (all nails are removed).

В года ВОВ, за Уралом, мой многодетный дед не был взят на фронт и сел продолжать делать сапоги из кожи. Вся деревня носила ему кожу, какая была, какую кто раздобыл, в том числе и меха. Местные оставшиеся, из числа охотников, приносили шкуры волков, лис, выдры, медведя, оленя. Все шло на утепление обуви. Он обучил этому ремесленному делу детей-подростков. Вместе они выпускали много обуви и вся обувь отправлялась на фронт.

Интересно, почем пара таких черевичек?

Низ(подошва)долго не протянет

Видимо так задумывается..А в целом,-изящная работа

Во времена СССР обувь не фабриках шили именно так. Только не заморачивались со стелькой, не отливали по ноге, т.к. шили на поток, а здесь индивидуальный заказ.

аналогично!

А у самого мастера заметили какие туфли?

@@Vperedsmotryashii так он же на стуле сидит, а не по горам гуляет

@@AIDOSER не про класс обуви речь. Да есть беговые, горные, вечерние... растоптанность, вот о чем хотел написать. Новая обувь держит ноги в строгости, а расплывшая старая как бы уже родная

Me too I don't do that usually

I don't understand but sure it's good 👍👍👍👍

@@ramonoff According to google translate are they saying: Incredible aesthetic pleasure to watch your work. Thank you very much!

@@Wipeout186 Good idea to me next time, you're clever.

@@ramonoff If you use Firefox can I send you a link to a simple translation extension that makes translation of text or entire webpages so simple no need to open a new webpage.

@@Wipeout186 Thanks for your kindness, but I normally use Chrome and occasionally Edge. In any case, if you send it to me, I can test it by installing Firefox. Thanks again

If you live in the US or UK it’s actually not too expensive to have some custom insoles made and have your favorite boots resoled. It won’t be the same, but it will cost a lot less and the comfort and durability will be way better than standard boots. My brother in law is an electrical lineman and discovered that life hack from one of the old guys. If you have a boot you like and want extra comfort and durability… find a cobbler and have them upgraded. It will be worth it because you won’t need boots or anything for years after that.

Price in 2015 were $300 to $600. Not as crazy as I thought.

@@rockstardonut777 brb gonna send my foot to korea

They seem to be around 500 bucks. Though I assume a lot of that cost is you paying for the name and to have it custom made for you which is honestly more worth it than whatever it's made from.

I used to buy a pair of cheap shoes every 3-6 months, but 2 years ago I splurged and got a pair of handmade hiking boots and they are still as new and I'm sure they'll last many more years. You save in the long run.

I knew an ex-cobbler, who complained that most shoes are not even repairable these days.

Yes, they can be resoled. A pair of boots like this can last you a lifetime.

@@ADAMJWAITE Can pass it down to your kids ;-)

In fact, video companies say that they can provide a/s for the rest of their lives

The man used spray paint... Unsurpassed my ass

​@@AmericanBusinessman422sending you some love. You seem to need it a bit :) Its not paint, is polish. Activate the CC, it exlains ;)

Руски не понимай здес

@@dombyraqazaq4393 я русский понимай здесь)))

@@dombyraqazaq4393 не тебе и написано, иди куда шел!

@@dombyraqazaq4393 Учи, пригодится)

@@Lifehackerys А ты китайский учи, тоже пригодится.

How can you make such a statement without seeing all the other shoe makers?

@@ultimaetsolder I made that statement because I felt like making that statement. It’s my opinion of what I have seen. There. You have your answer.

한국어로 쓰기,당신은 바보

@@zetpool9435 если вы не в состоянии использовать Google translate, то большой вопрос кто из нас глупый.

@@zetpool9435 그의 발에 키스해라, 똑똑한 녀석아.

@@zetpool9435 Нам на своем проще писать. Не можем же мы знать все языки. Пользуйтесь переводчиком, один щелчок и готово!

Agreed, one of the biggest downsides to industrialization is treating each human as a brick in the wall. I feel the same way about how houses should be made too.

Definitely !!! This is how things should be made ! We still can make theses rare professions of art live through our interest and buying choices! :)

@@marisakennedy777 самый большой недостаток- запланированная недолговечность массового производства.На вид красиво, а через год развалится

I think the glue was rubber cement because of the way he used a hammer to set it after it was dry is how rubber cement works

Try Ozark trail they are high quality and pretty cheap too , Walmart sells them I've had the same issue with my pinky toes also it's because your buying too small of a size I know you may be convinced that it's a perfect fit when you buy the shoe but over time the Pinky's feel the pain try buying a size up from now on it's working for me so far has gotten rid of some pain in my feet as well. But yeah Ozark trail is one of the best in my opinion I've been wearing a pair of their steal toes for about 5 months now and they are great I do have some insoles in them though

magic, absolut magic

They probably require very little if anything to break in.

Try White's, Nicks or Frank's Boots, all of which are in Spokane, Wa. Custom boot manufacturers and it can all be done through the postal service.

@@ADAMJWAITE ваши политики доиграются, и дождуться когда армейские берцы русских десантников дойдут до Вашингтона.

South Koreans and Japanese make things. Americans play with money. LOL.

Руски не понимай

@@dombyraqazaq4393 ну извиняй, на собачем -украинском не могем😄

@@ja60564 Он типа казах, за кахляндию болеет только. В казахстане тоже хватает русофобов. Можно было бы в этом убедиться, если бы не поддержали действующий режим недавно.

@@Lifehackerys а до поддержки их что ли меньше было?🧐 Вот из за них то и поддержали. Пускай их благодарят что не вышло.

@@ja60564 Не меньше, но такие как они могли зайти во власть. Вокруг России скоро дошатают режимы, что шатальщики исчезнут сами)

1.Нет подпятника.2.Фурнитура не из нержавейки,это только пока.

Такие ботинки явно не по городу ходить, строго по маршруту,или на охоту.

@@user-zy3bn1si4l я в таких батинках на танцплощадку ходила танцевать

That pair is going to live forever 🤣

That pair is going to live forever 🤣

I'll 2nd that 🎉❤

Я 30ть лет на пошиве отработал и случалось не редко ходить в дырявой обуви)

Почему не купить?

@@user-lb1ht3uk2v да наверняка дорого. И как это будет выглядеть? Мы в Питере живем...

@@user-lb1ht3uk2v Реально трекинговые ботинки ручной работы очень дорогие!

@@user-lb1ht3uk2v Деньгами такое не оплатить.

honestly, when the craftsmen are that old and experienced, a 10 year head start may not even make that much of a difference. it's the retention that lets them hone their craft for so long that really impresses me. it takes a manager who really cares about supporting the team to do their best work long term, and people in society who really value both the craft and the sports that the craft supports. stuff like this isn't possible without support from all levels

One can learn anything at any age, its never to late to learn something new.

@@user-gz4ve8mw9l Yes an 80 year old can learn to fly a jet while dancing with tremors and a newborn can learn to swim. You just gotta toss him into a pool.

@@sayamqazi thats the spirit!!

yes child labor very common in asia lol

while watching the video, and having a computer job as well, I thought exactly that!

This

yes, no wonder when Xi Jinping himself takes part in the process 🤭 6:16

My 6 year old daughter does what 80% of hikers do in her dollar store flip flops and a barbie 😅

@@1BigDaDo These boots aren't meant for the 80%. I don't even want to know how much they cost.

​@@kasparsjansons9220😂😂😂

Давай закажем у него,я тоже хочу😁