How to make and facilitate the "Bolt in the Bottle" for team building.
КОМЕНТАРІ: 189
@bannerline7 років тому
Great stuff. Thanks so much for this! I will try it!
@JFBence7 років тому
There is actually a puzzle toy like this. You have a flat bottle, a nut, a screw, a cotter pin and a wooden ball. You use the ball and the inner side of the bottle to unscrew it!
@kdmellor6 років тому
What do people at your work think when they hear that thumping sound coming from your office?
@rodmascotto67507 років тому
would any glass bottle work?
@SuperSaltydog778 років тому
Because the thread on the nut and bolt are "right handed" gravity will cause the nut to loosen when the nut is on the bottom. If the nut was on top then gravity coupled with the right hand thread will cause the nut to tighten. This whole scenario would work in reverse if the thread was "left handed".
@OnlyNotes8 років тому
Torque spec on that bolt? ;)
@bradleyduvall51612 роки тому
I have done this before. But we have 2 bolts, 2 washers, 2 nuts. Holes are drilled loose so bolt can move freely. It is a challenge but pretty simple once you get the hang of it. And we do not use any wireto put the nut on.
@peterfehr89898 років тому
I have a bottle like that too and I don't need any paper or nitle what ever you use to do it
@kryo1019 років тому
this is stupid, i don't understand why you didn't just use magic to put the bolt an nut in,
@berndbeispielmensch6 років тому
Because he is not allowed to use magic outside of Hogwarts ;)
@johnpepe45016 років тому
if u real need how to know reality magic find me
@nickjimenez99836 років тому
Orlando Pockets This was three years ago but now you can see if comments are edited its not edited
@hefhaus48406 років тому
That is five minutes of my life I am not going to get back again. Why did I watch that?! lol
@gjmob8 років тому
My dog is pretty good at this kind of thing. You kick him in the guts, and he either makes a spring for your nuts or a bolt for the door !
@creeperlamoureux9 років тому
oh i thought it was Bottle in a bottle
@WetWillie679 років тому
I know right
@TheStroiDom8 років тому
Excellent work out.
@billhoffner14099 років тому
lol..All you need to do is hold the wood dowel and spin the bottle. The nut will thread on or off depending on the direction you spin the bottle
@fft20209 років тому
why da f am I watching this ?
@benmcfadden70619 років тому
ikr
@NylaVox6 років тому
fft2020 I thought he meant lightning ⛈ bolt~ 😔
@boandersson52765 років тому
agreee
@Mrm0nG08 років тому
Oh great, 5 min of my life i'll never get back
@johnjesus9718 років тому
+Robert Miller Then you spend another minute writing a comment?
@Mrm0nG08 років тому
actually about 5 sec
@utterants8 років тому
+BandAid Yes, but you came back to comment on the response to your comment.
@Mrm0nG08 років тому
and about another 5 sec
@utterants8 років тому
+BandAid Like Tescos points - they all add up
@goyeabuddy8 років тому
ok I got it, when my wife yells at me to get out of the house, I'll go out to the garage & do this!
@kris91188 років тому
perfect toy for british
@sosted8 років тому
Young frankenstein
@ScrewedupClicksta7133 роки тому
:23 haven’t dropped one of those in a while unfortunately
@rodneyemmerich88288 років тому
You will make an excellent gynecologist
@1964csilva8 років тому
I love turtles
@rajamanickam97078 років тому
v good
@667hodge8 років тому
is there a message in the bottle?
@biscuitsalive9 років тому
I'm not going to waste my time trying to do that. I shall waste my time watching you do it instead.
@tjseagrove8 років тому
You do not need the paper of paperclicp. Can all be done just with dowel, bolt, and nut.
@davidmeale95728 років тому
...and a life !!!
@offroad57986 років тому
So basically I need to find the perfect glass bottle...
@JJE2010MO6 років тому
Love this idea! You could even make 1 or 2 wild cards by putting super glue on the nut so it won't come apart. It would be fun to watch that team!!!
@garylist96 років тому
Great stuff!!😀
@jonvincentmusic8 років тому
Why don't use use a strong magnet on the other side of the glass to turn the nut.
@thewatcher25098 років тому
+majorfubar69 What I was thinking too. I didn't make it to 4:31
@davidwoosley8 років тому
Ditto. In fact, with a strong enough and cleverly built electromagnet that surrounds the bottle, the bolt could be tightened *tight* in a matter of seconds.
@wayneashby50308 років тому
+Furyrulez To put it together, I was thinking of the magnet trick too -- I would use a strong neodymium magnet. The magnet wouldn't turn the screw if the screw head is wedged into the wood hole a little bit first, the way he showed in the video.
@ianthewonderful6 років тому
That's amazing - how did you do it?
@martinoamello30177 років тому
So this is how you drink in the bar for free, huh?
@victorstalick55288 років тому
So what did he prove?
@civilwar12348 років тому
Nice job!!!
@HukeLLL8 років тому
Still wondering why he did this and why he couldn't screw it on before he put it in the bottle
@blox90008 років тому
The bottle can't fit in the bottle when it's screwed on
@julioseviltwin23047 років тому
@luke ..moron
@blox90007 років тому
Luke Horner you forgot to get out the bottle and the bottle outta the bottle in the bottle
@HirumiKato8 років тому
Is this Bill Paxton?
@BC___17 років тому
watching you tighten the bolt triggered my OCD really bad for some reason
@gasfrommyanusi0i5948 років тому
I started out looking for a video on how isis was created and I landed on this. Welcome to the interwebz
@draftelite67707 років тому
Why is a football coach telling me how to do this.
@majorleaguinfidel7 років тому
Combat Ready probably learned it from the science teacher. Its basic physics.
@unitedpootisfoundati7 років тому
anxiety.mp4
@austinlindsay8 років тому
Should've used a the eraser end of a pencil to thread the bolt. And a steadier cameraman to film the video.
@VC277 років тому
@Austin Lindsay - That is an absolutely brilliant idea!
@OffersBusiness8 років тому
What is the use of Bolt in the Bottle? Why should I do this?
@megatron50408 років тому
+OffersBusiness It used to be done as a puzzle. You challenge clueless people to figure out how to get the stick back out and then watch them get frustrated. Bonus points if you offer a prize so they don't just instantly give up. ETA: Oh, and you tell them they can't use any tools or break the bottle.
@josepharmstrong56938 років тому
I can do it without the paper and wire and use nothing but the stick to put bolt and nut on and take it off while inside the bottle
@xXdevil9852Xx9 років тому
I went to Computer Hardware to Bolt in the Bottle. UKposts...
@EZCarnivore9 років тому
Isaiah TechniFixer Me too =P
@viktord.44569 років тому
Some people have too much free time on their hands!
@harpodjangorose96968 років тому
A UKposts commenter should think twice before saying that.
@pirkst52279 років тому
Their is a guy that puts a ball a nut and a bolt and puts it together with out cheating like this guy and can get it apart
@YellowZnow887 років тому
Have you seen the guy that does this the legit way???
@mansooraliali62778 років тому
Why he did it ???
@MrKabDrivr8 років тому
The art of time wasting... Master level...
@ImIPoize8 років тому
What's the point?
@harpodjangorose96968 років тому
To pass the time aimlessly. Another great way to aimlessly pass time is to leave comments on UKposts.
@ImIPoize8 років тому
My comment wasn't aimless. Fairly relevant.
@harpodjangorose96968 років тому
I'm certain that a man who threads a bolt inside of a bottle feels his efforts are relevant as well.
@ImIPoize8 років тому
That's what's wrong with this world. Lol
@ImIPoize8 років тому
Life, is a problem solving exercise. This is just stupid..
@JamesScott729 років тому
BUT WHERE IS THE GENIE?!
@rickwells81137 років тому
Why?
@sangrino71669 років тому
Can't you just drop it in?
@charlesfindley9 років тому
Nicholas Giovanello The point is to make it so they cant get it out.
@delta9thcfan8 років тому
sir, it's called a carriage bolt
@ChristopherDemetrick8 років тому
I neodymium magnet worked best for me.
@YknotLearnall7 років тому
use vibration on the dowel, such as from a vibrator, or electric toothbrush... to thread it on as well.
@mrsidneyapolinario7 років тому
Que bacana meu amigo...
@user-xs5fj3ms2l6 років тому
I would suspect a long flat-head screwdriver would be easier to turn the nut to screw it on. It would be flat to provide more tension on the nut surface to screw it on. Plus, the screwdriver would not be as flexible as a paperclip.
@EricH_198310 років тому
I would of ended up smashing over my collegues head whilst shouting teamwork....
@Wernping6 років тому
puck
@oodimvale8 років тому
very nice.... congratulations...... São Paulo - Capital - Brasil
@TheDaringPastry13137 років тому
you can do it without the paper and the paperclip.... lol
@tomfrench91866 років тому
smoking cigarettes cures salmon
@568min8 років тому
Just for to kill the time free
@poindy8668 років тому
loop an 1/4 wide elastic over the nut that will reach out the opening ( 4 inch ) once it is started and like a tracked vehicle , spin on the nut ...faster
@BenBenkc9 років тому
next time, use magnets :)
@nilsholgerson79339 років тому
Trust the asian!
@AlutaShade8 років тому
You could probably just use a strong magnet to help tighten it instead of the paper clip ;)
@erikmarkus74678 років тому
+AlutaShade i dont think that works at all. spinning the magnet would not spin the nut unless they are in contact, which they wouldnt be.
@matteedstrom9 років тому
A more easy way is to use a magnet to spin the nut, i prefer neodynium magnets.
@mauriciohildolfowilsonjarp77008 років тому
mmmmmmh... ¿Y ésto... para qué sirve...?
@1964csilva8 років тому
+Mauricio Hildolfo Wilson Jarpa matar curiosa
@bernarddover14426 років тому
He doesn't go out
@RobertoX-ro8sv7 років тому
WHY?
@jaulloa219 років тому
Cocaine is one hell of a drug.
@harpodjangorose96968 років тому
Fuck this couch!
@massimodesigner36778 років тому
un mese ci vuole .o_-O.
@michaelhenwood40468 років тому
Is there any real point to this?
@1964csilva8 років тому
+Michael Henwood yes to learm how build airplanes
@MrWizards19746 років тому
How about moving the mic away from the work and closer to your mouth
@fuckyougoogleplus866710 років тому
Put some tape on the paper clip to give it more gripping power on the nut
@EBastler8 років тому
You should use Loctite 270 :P
@philiphart7508 місяців тому
Using paper and small dal rod is CHEATING. I have NEVER cheated. I put the bolt and nut in the bottle, then the dal rod with the hole In it. Stand the bolt up with the dal rod then put the bolt in the hole. Then put the bolt on the nut and pull it to the top of the bottle and spin the bottle and the nut will screw on. I have entertained people for years and it works quickly.😢poor showmanship.
@samsen2018 років тому
Smart
@myv84x457 років тому
A strong magnet would have helped you thread the nut Great video
@yukiyuki95068 років тому
How to get the bolt out: Step one: Grab the bottle Step two: Smash the bottle Step three: Unscrew the nut with your hand Step four: Pull the bolt out He never said you cant use your hands to unscrew it or not to smash it I followed the rules didn't I :)
@joep65038 років тому
luke Davies ukposts.info/have/v-deo/qqipdp2lh3d0qIE.htmlm42s
@Megaladon-il9zw8 років тому
smash = brake which he said not to do
@newsoutletnewsnews81228 років тому
+luke Davies no you didn't :) you didn't watch the whole video... its okay we all make mistakes
@electricianbytrade60138 років тому
not sure what I just watched or why...
@burvislvsaukans8778 років тому
wow col thanks you dat is cool
@hunthunter43338 років тому
? are you crazy
@bernarddover14426 років тому
Blue tack on the wire turns the nut easier AND quicker
@michaelangel62018 років тому
why not just use a magnet to twist the screw?
@montydog358 років тому
+Michael Angel Because he said at 4:31 you could use only what you see
@subrataraychaudhury67977 років тому
You can't. If you are thinking you can turn the nut using a magnet keeping the bolt stationary, that won't be possible. Both nut and bolt will become magnetized and will stick together. Well, you can try with a steel nut and aluminium bolt.
@rogerball75699 років тому
Why r there so many haters this is pretty cool
@darylw1567 років тому
Now do it without the paper and paper clip.
@edfuckingjohnson6 років тому
turn the nut with a magnet
@TheLaenCZ8 років тому
why :D
@Vassilika18 років тому
I did it with a lock-nut! :p
@tristanclark70868 років тому
you cheated with this so bad, it is not necessary to use either the paper or the paper clip, you just need a small cork ball inside the bottle, I made one of these myself and it works fine without cheating.
@imigliorigiardinieri-roma-24618 років тому
perchè....
@user-lj2ep9iq1v6 років тому
what??
@raulking97558 років тому
12(1461
@Penfold88 років тому
Next time put a little screw lock on the bolt ;-)
@clliffvoss11589 років тому
maybe cool for kids
@ofcv12389 років тому
nice video. i find it amusing that so many are cynical about time invested in creating games. they all would surely invest an hour of time at an expensive dinner of adults trying to resolve. for some reason knowing how to make something seems to debase the entertainment value of the end product. not a positive statement about human nature.
@_droid8 років тому
Pretty cool except for the fact that I have servo controlled motor system that can produce better results than these bottles in less than 10 seconds... Oh! Worry me! I have too much money. :/