A must keep video in my watch list for future use. My expert diverge di2 just said ‘ Many thanks bro !!’ Pure rider info for riders, appreciated 🥰

All you need to do is read the Di2 manual. To adjust the rear mech all you do is: - shift to 5th cog on the back - Enable adjustment mode - Shift up till you hear noise from the chain hitting the 4th cog - Then click down 4-5 times Thats it. If after that you are still having issues then check your hanger.

THANK YOU, I dropped my bike on the rear derailleur side and the chain noise was driving crazy, this guy explained it so good a few clicks and I'm back to my normal self,man that was annoying, thanks dude. BTW love your channel.

Great video , appreciate all of your assistance and content !

Very good I will trying now ,since I got problems this morning. Keep looking UKposts which better thanks bro 🙏

Thank you a million.. S going nuts. Between the trainer and my wheel, there is a diff that I couldn't fix. Thx

Awesome, thank you so much, you mentioned the problem that I have been having that is moving to my Wahoo trainer and i get a lot of noises

I noticed that dura ace derailleur cages all have a slight bend and twist in them make the entire drive sound lousy. Shimano said it's to prevent extrema cross chaining. It's terrible 😭

Handy, going to try this. Can you do an update video on the newer semi- wireless system using the app and function button?

Saved my ride!!! Thanks bro

Guys, i have issue with my hardest speed. When i m puting it the derailleur touches the frame and the small wheel and the chain (upper one) scraches the frame as well. I tried to set it up as you showed on the video, i tried to play with H and L screws and the only thing that i managed to prevent that it happens i set up H limit on the second hardest speed. I bought used bicycle but for around 300-400km eveything worked perfectly and first i started having problems when i was going up from hardest to the middle speed but this was caused by the fact that the lock of rear derrailleur was open and i didnt realised it. Can somebody give me advice how i can try to solve my issue? Thanks

wouldn't you first check and adjust (if necessary) the upper and lower limit screws? Then do the trim?

Thanks

Great vídeo 🤟👌👌👌 Hello from Spain 🇪🇦

Do you think shamino new groupo 12 speed would be easier to adjust, similar to sram?

Hey GC, does the chain has to be in the small chainring for this mode? Some say it has to be that way

Micro adjust per each cog or whole cassette? Sometimes you’re misaligned only specific cog.

Good very useful! but didn't menthon about how to quit the Micro Adjust mode (the red light mode ;D)

Thank you 🙏

what about adjusting from the rear derailuar, there are two screws behind.

Cheers mate

To exit micro adjust just press the button again til the light goes out. I thought you were on vacation this wknd? 🚲🍻😏

Thank you 🚲 Chicago 🇵🇱🇵🇱🇵🇱🚲

Mine isn't even remotely done this way. You press a button on the rear derailleur and then use the app on your phone to do the micro adjustment.

You forgot to show how to exit trim mode. Is it just a quick press, long press, or double-press?

65

You certainly made hard work of that! Over complicated the process and confusing. The GCN video is clearer!

still mechanical stomp di2 , DI2 are for the weak finger 😂👌

The sram version seems a bit more simpler

Are you even real?? Bike shop is non existent! Who’s shop did you video????