How to build a Hidden Shelf Edge Clock - 3D Printable | Elegoo Arduino Nano | Smart Home | LED
Переглядів 1,326,790
4 роки томуI'll show you how to build a very smart looking shelving system that includes a hidden giant clock in the edges of the shelves, and integrated LED downlighters to show off your favorite items on the shelves. 👇 More info below 👇
As the lighting is LED (using WS2821B 'Neopixels') you can choose your own colours. A discreet photoresistor also dims the LED's when the ambient light levels drop - great for evening ambiance in any room.
List of items used in this project and where to find them:
■ An Arduino Nano(x1): geni.us/ArduinoNanoV3
■ A 5m roll of WS2812B LEDS which has 60 LED’s a meter: geni.us/5mWS2812B60m
■ A Photosensitive resistor module: geni.us/PhotoresistorModule
■ A DS3231: geni.us/DS3231-RTC
■ Some Hook up wire - ideally three different colours: geni.us/22AWGWire
■ A couple of 470 Ohm resistors: geni.us/Ufa2s
■ A couple of electric terminal block strips - each 5 blocks long: geni.us/TerminalBlocks
■ No 8 wood screws: geni.us/No8Screw
■ A 5v power supply with screw terminals: geni.us/PowerSupplyTerm
■ Some thicker twin core cable
■ Some filament for the 3D printed parts: geni.us/PLAFilament
■ Wood infused PLA filament: geni.us/WoodPLA
■ Wall unit rail: geni.us/WallUnitRail
Support future projects, see DIY Machines' Amazon Wish List: www.amazon.co.uk/hz/wishlist/...
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: shop.prusa3d.com/#a_aid=diymac...
Prusa support my channel when you use that link at no cost to yourself. :)
These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code, 3D printed parts, wiring diagrams and more information can be found here:
www.diymachines.co.uk/how-to-...
Drawing for CNC drilling of the backboard (if you have access to a CNC machine or know someone else who does):
www.etsy.com/uk/DIYMachines/l...
DISCORD server for project help/advice: / discord
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: / diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ / @diymachines
DISCORD server: / discord
INSTAGRAM: diy_machine...
FACEBOOK: / diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
@armel2467 3 роки тому
It's very rare that a youtuber will freely share every information and files needed to accomplish a project. This helps every aspiring builders master their craft. Thanks
@HamzaNajahOfficial 4 роки тому
I'm really impressed to the way you are explaining things that easy way. one of the best UKposts's recommendation.
@mychemicaljojo 4 роки тому
This is the first video I see from your channel. As someone new into DIY projects I have to admit your videos are brilliant. Very concise way of sharing tutorials but very informative at the same time. The content being shared and level of detail (incl files!) is incredible. Great job!
@397sidhu 3 роки тому
This project won the grand prize for the clock contest in Instrucables. Great job man.
@stefankachaunov396 4 роки тому
I haven't even finished watching the video and I love it already! That's what I call a DIY project, elegant and neat, a good change from janky hot glue and and breadboard atrocities that come off as ready projects sometimes!
@DIYMachines 4 роки тому
Thank you. :)
@jackrasmussen4467 4 роки тому
I've be researching ways to use my 3D printer, my arduino, and working with wood and cars. I am in semi-retirement right now and I am looking for something to add to my retirement fund. Thank you for helping me come up with some more ideas.
@DIYMachines 3 роки тому
You are very welcome.
@adrianhardcastle9297 4 роки тому
Genius! A real 3d printed project with actual value and real world application, good job!
@DIYMachines 4 роки тому
Thank you Adrian. :)
@TheAdminFromHell 3 роки тому
How will this show time at 22:49?
@robertsobaszek6352 3 роки тому
@@TheAdminFromHell 10:49
@-_Robert_- 3 роки тому
@@TheAdminFromHell this is an issue. can't.
@reinoud6377 2 роки тому
@@TheAdminFromHell it's a 12 hour clock, you could easily make a 24 hrs one, just modify the code
@Pelax-po7uw 4 роки тому
Hi mna, Im from Argentina and I really was impressed when I saw this! Definitly Im going to try this project! Congrats! You`re a genius!
@AliciaSykes 4 роки тому
This is so creative! An awesome idea, beautifully executed and clearly explained. You've got a lot of talent - thank you so much for making the video, and sharing it with us! 🙌🙌🙌
@McTroyd 4 роки тому
Neat project! We want to build one now. Version 2 suggestion: make all of the segments LEDs. Use complementary colors, and one could then overlap digits for a full 24-hour clock. Example: One clock digit is red, one clock digit is green, but the segments overlapping will show red+green=yellow. Lots of visual effects to be had when the room lights first come on, too.
@PleasantP 4 роки тому
This is the cleanest, most well explained DIY video that I have ever seen. Huge hats off to you for not o lt coming up with a super cool project, but documenting in a clear and concise way.
@marcatomow3546 3 роки тому
The way this guy explains stuff is amazing. I don't even know how to do ANY of these things but I have the tools for it and a 3D printer. Nothing is holding me back!
@perryvanvelzen9863 2 роки тому
I've finally been able to start printing the parts for this project, very psyched to start building. One thing of note is that the amount of wood filament you need is quite substantial! According to Cura and my math it will come down to about 2.6kg of wood filament, so that's 3 spools of 1kg. Keep that in mind when you start prepping purchases.
@shreyasshah7217 4 роки тому
this is an amazing project and you explain it very well. just a suggestion, you should never leave the resistor or any other component terminals open as it has a risk to short(at 15:57). you can use a heat shrink or some hot glue to secure it.
@emilbakker6941 4 роки тому
What a great project and so well explained! I will build this project with my students for the hall at school. Thanks. I will change it to a 24 hr. clock.
@davidruvolo2219 3 роки тому
this is one of the best instructional videos I've even seen. he did an amazing job.
@nasirshah1983 4 місяці тому
To be honest, I don’t know how you manage to do such a good job every single time. Very well done!
@DIYMachines 4 місяці тому
Thanks for the kind words 😁. I'll keep working on the projects.
@Keefcooks 4 роки тому
Wow, love it! Definitely one to add to my list of projects that I'll probably never get around to! Subbed.
@imashish86 4 роки тому
This is SOOOOOOO Fantastic! So Patiently explained and precise! Thank you Good Sir!
@ericcarabetta1161 2 роки тому
Thank you so much for including all of your project files and explaining how to make such a cool project in outstanding detail.
@DMonZ1988 4 роки тому
wow this is awesome! really nice work Lewis! the whole video is clear, detailed, fun, well paced, and the result is absolutely fantastic! thank you so much for all the effort you've gone into to share this project with us in such wonderful detail and make it so approachable. i'm definitely going to try this!
@DIYMachines 4 роки тому
Thank you. I'm really proud of the finished project. :)
@glennleader8880 4 роки тому
@@DIYMachines And so you should be. My time is precious to me, and you sir, have earned my subscription based solely on this video. Totally awesome content and presentation.
@alexanderhackner 4 роки тому
@@DIYMachines I've finished mine today :D. Great instructions! I had a lot of problems with the LEDs glitching when using them with the 470R resistors. Without them the clock is working fine.
@DIYMachines 4 роки тому
Alexander Hackner fantastic to hear it’s gone well. If you don’t mind I’d love to see a photo of it. You can share it on Thingiverse as a “make”: www.thingiverse.com/thing:4207524 or send one via Facebook: facebook.com/diymachines
@GaneshPatil-fh8bv 4 роки тому
Hello sir how to get details of connection diagram, i am from india and saw many items are not available on Amazon.in so how I can get?
@minutemark 3 роки тому
I may buy a 3D printer just for this project! Beautifully designed, incredibly functional, and quite elegant too!
@DIYMachines 3 роки тому
Thanks Mark. Hopefully if you do I'll be able to come up with some more projects to create with it. :)
@tinu5779 2 роки тому
I've seen so many clock designs over the years... but this one is finally something i consider to also build. This is a very nice design!
@DIYMachines 2 роки тому
Thank you very much!
@dhruel 3 роки тому
Beautifully finished project and elegant shelf/clock. This is one of the few DIY electronics projects that I'm tempted to actually create. Just need to get my hands on a 3D printer or a friend with one. Another thing to do that helps prevent the power cable from tugging off the components is to tie a simple knot in the cable while leaving a bit of slack, all inside the device. Ideally, the knot is larger than the hole so that the cable can't be pulled out. That along with the glue will give a very durable and nicely finished power cable attachment.
@ayon12351 4 роки тому
Wow, just wow... You are the best at explaining EXACTLY how to do this stuff. Easily a like from me ;)
@DIYMachines 3 роки тому
:) Thank you. I'm glad you're enjoying the projects.
@vincenttran5920 3 роки тому
me before watching: yea that looks simple.... me after watching: hmmm where can i buy 1?
@MrRogergreene 3 роки тому
I was asking myself the same thing. Where can I buy this as I do not have a 3D printer. Even a kit I can assemble would be fine.
@Akaprovic 3 роки тому
I need a link to buy it!
@TheChimichanga-br4uu 3 роки тому
@@MrRogergreene There us 3D pricing services, you can send them what you want to be printed and they will ship it to you.
@adriangalvez798 3 роки тому
@@MrRogergreene There are places with public 3D printers for a reasonable price
@bigkittytank 3 роки тому
It will take a LOT of time to print - he listed the print times @2:02 (for 3/31 brackets will be over 9h) @4:20 (for the led backing 3/23 will be just over an hour) @8:45 (for the 32 shelves that were roughly 7h each)... so the total print time will be around 327hrs
@nadasallouhi8264 3 роки тому
You are a GENIUS. Loved your work and how you shared every detail about it to the whole world. Definitely made my night!
@d3fc0n0wltraps Рік тому
Outstanding project and video! Thank you so much for sharing EVERYTHING. I started this a while back and finally got around to finishing it this week. The result is excellent and that is due entirely to how thorough and approachable you've made it. For anyone else looking for them, the hanging mechanism used is called a "French Cleat"
@DIYMachines Рік тому
Glad it was helpful! Thank you so much for coming back and sharing your gratitude.
@iggorr25 4 роки тому
Absolutely BEAUTIFUL!!! Great job, I will making my own for sure!!! :D Who in the world dislikes a video like this...? :P
@sumerianrcpilot8889 4 роки тому
Oh my GOD... that was the neatest, most satisfying and the most informative project that I have ever seen on UKposts... I wish I had known about your channel earlier...🌹🌹🌹
@DIYMachines 4 роки тому
Sumerian RC Pilot thanks. :)
@okIahsam 4 роки тому
This is really cool. I'm tempted to make this myself. One improvement I might suggest is using Wago Lever-nuts instead of those terminal blocks. Much more compact and easy to use. I love them.
@RandomTechJunkie 4 роки тому
Wow-what a great job and project. Well done! It looks like it took some serious time to print everything.
@Rob_65 4 роки тому
This is a very cool project, something to build for my new office. I will most likely be creating the shelves from thin plywood, the front from white plexiglass or PP sheet and use an ESP8266 connected to the internet to get the time but the idea is great. I read some comments with respect to a 24 hour clock but that does require an extra shelf unit making it too long for my liking.
@calysagora3615 3 роки тому
Funny, I was looking for 24h comments, I immediately thought "Hmm, I'd like something longer and several rows, that can display messages, and have a useful amount of storage, to swallow useful amounts of books and/or fittong boxes.
@tartilasahid8056 3 роки тому
Bro does this clock only ends at 9:59? Because i didnt see 0 in the left during the time 7 at the beginning
@TheHookUp 4 роки тому
Another super well made video. You are really underappreciated! My one suggestion: Change the orientation on the support prints so that the layers junctions aren't opposing gravity. It will make the "Shelves" significantly stronger.
@davebacknolaliki1452 2 роки тому
Yeah that is true. But you may need supports if you did print it in the other orientation
@uncle-june 3 роки тому
The combination of watches and shelves is a wonderful idea.
@kevinbeachus6988 4 роки тому
Totally agree with the comment about selling them as kits, if I had a 3D printer I’d be making it right now
@mpeterll 4 роки тому
That was awesome. You should sell them as kits. To keep shipping costs down, the back board can be omitted and a paper template included instead.
@JoelBenge 4 роки тому
I'd second this! I don't have a 3D printer myself, but could probably handle the electronics build and assembly.
@SteeveAustin 4 роки тому
GREAT job, i already do the Simon's game, and its perfect !! My Daugther play every day with Simon's game. I think i'll do this new project so BIG THANKS for quality of your videos !!!
@DIYMachines 4 роки тому
Thanks. :) I still play on with the Simons Says I made whenever I need a couple minutes break from work. Glad to hear your daughter enjoys it.
@Frixon21 29 днів тому
This is the best explanation of any electronics i've seen other than actual lectures
@Bluepeter62 2 роки тому
The perfect display shelf for a watch collection.
@SeamusHarper1234 3 роки тому
Really nice! A possible upgrade: Use a ws8266 instead of the nano for wifi capability, so you can use a time server for changing to daylight saving time. And have an app to play around with the colors....... Everyone needs blinking colors.
@Harry_Nsubuga Рік тому
Don't you mean a ESP8266?
@Kamodomon 4 роки тому
I wish I had a 3D printer for this one. It looks SO GOOD.
@juliap.5375 4 роки тому
Omg, everywhere exist companies which will print anything for you. You NOT need to have own printer.
@D1Ck3n 3 роки тому
@@juliap.5375 sure, but did you see the price for printing over 60 Parts? ;) or do you know a cheap vendoor for that?
@johnnyblaze7693 2 роки тому
Phenomenal work from the video editing to the engineering project itself. It's informative and explained in detail. Just so inspiring, makes me want to buy a 3d printer and I know nothing about it. Wish I had you as my science teacher
@MsCemhakan 4 роки тому
great ,wonderful,fantastic,gorgeous ....it deserves all the beautiful adjectives.
@Cornell_ 4 роки тому
This is extreme cool mate! I’ll for sure try to make one for myself :D Thank you for sharing this project!
@DIYMachines 3 роки тому
Glad you like it! :)
@travezripley 4 роки тому
YEAH, THIS WAS AWESOME!!
@austindale3129 4 роки тому
Great project and great video! All the fun stuff cnc, 3d printing, electronics, and arduino. Thank you for doing such an excellent project and a great job, please keep up the awesome work.
@captainbligh2504 3 роки тому
I am new to this channel and have just finished watching this. What a great design and extremely helpful tutorial.
@W00FLES 4 роки тому
Build and Video quality was so solid you honestly shocked me with your lack of heat-shrink usage 0.o
@davidreynolds9649 4 роки тому
and excess solder! lol
@prozac4545 4 роки тому
That was some sloppy soldering. I guess it technically works, but yeah... it's a rat's nest and it looks like Ron Jeremy made a visit. That being said, I do like this idea, so props there for sure.
@ethanalloway5946 3 роки тому
Awesome work! I’d really recommend the WAGO connector instead of the terminal blocks as they are rated to extreme voltage and simply click in with a folded flap.
@DIYMachines 3 роки тому
Good advice - I bought some and really like them. Thanks. :)
@ethanalloway5946 3 роки тому
Awesome!
@hackmaniacs8754 3 роки тому
I think that is the true meaning of a TUTORIAL . Amazing job by explaining the whole process ..I think that even somebody that has no idea about electronics and programming would be able to make this after this AMAZING step by step guide. I am really impressed !!!
@DIYMachines 3 роки тому
Thank you so much! It took a while to film and edit so I'm glad you appreciate it. :) Thanks.
@merlinforster9007 4 роки тому
Awesome project man! This is the first video i've ever seen of you and I immediately subscribed 😍 stay just the way you are! And thank you so much for the work you've put into this project
@fullraph 4 місяці тому
That is such a fun project! Any plans for a 24h version? It looks amazing with the small plants.
@familyguy0398 4 роки тому
Question, and sorry if it's been asked already: Why did you connect the 5V rail to the 5V pin on the Arduino instead of VIN? VIN has a diode that only allows current to flow into the Arduino. The 5V pin does not. I've lost a few Arduino power delivery chips from Neopixels trying to get all of their current through the 5V pin when connected to USB. I would definitely recommend resoldering your power connector to the VIN on the Arduino
@tmon930 2 роки тому
I've watched this tutorial about 19 times so I have it fairly well memorized. Is it weird that I find Lewis quite calming so I keep the video running in the background lol
@seggremalac 3 роки тому
I finished the video a few minutes ago and can't do more than stare the monitor and... WOW I've seen this one in UKposts's suggestions and thought like "Yeah, it's a nice idea, and not even too complicated." but never watched previously. Oh man... I love not just the idea and the complexity of the realization, but I adore how much detailed is the whole project. With every small details which came together at the end... You are a true genius.
@DIYMachines 3 роки тому
Balázs e.g. Smit Thank you. :) Very kind words.
@Julegaven 4 роки тому
Its really awesome and i'm really tempted to make one myself, the tons of 3D printing is holding me back abit, as I don't have easy access to one.
@SenselessUsername 3 роки тому
Doesn't seem needed? You can construct it yourself out of other materials... it will be frustrating and repetitive, but doable, and allows different scales.
@reidklyf5510 3 роки тому
I have used wood thin aluminium and an auduino uno 3d printing isn’t necessary
@marcelj.9033 4 роки тому
This is really a great project! Hats off! Unfortunately it is not a 24 hour clock. Otherwise I would love to build it again. Friendly greetings from Germany
@aaishashehzad6364 3 роки тому
An innocent guy as cool as his DIY project. Speaking so nice.....
@cruelsniperify Рік тому
This is possibly the best set of instructions I have seen in a UKposts video. Really intrigued to give this a go for myself. Excellent job!
@DIYMachines 11 місяців тому
Thank you. I'm glad you appreciate it.
@tacihibana 13 днів тому
@@DIYMachinesPlease help me. I haven't slept for 36 hours. I'm about to lose my mind. I have a problem. Even though everything is OK, the LEDs are not working. I tested the LEDs using test codes from the Adaffruit library, they are connected correctly and light up in the correct order. Sensor data is also read. but the time is not visible. By the way, I do not use 12 lighting LEDs in my project. I'm just making the clock
@IAmOrion Рік тому
I love this shelf edge clock, I'd love to build one - I hope one day you may revisit this and make it a complete 24 hour version, so 4 full digits and a center piece for the time colon eg 22:30 . Keep up the excellent work
@DIYMachines Рік тому
Thanks. And yes, a revisit and some improvements is on my to-do list. 🙂
@jacquesmertens3369 4 роки тому
Why has this channel not been recommended to me earlier? Thanks for sharing this wonderful project. subscribers = subscribers + 1 Having said this, I don't think powering so many LED's from your Arduino is healthy. That's asking for trouble.
@themalicraft979 4 роки тому
I would prefer subscribers += 1 😊
@skywavelincoln 4 роки тому
@@themalicraft979 subscribers++
@familyguy0398 4 роки тому
As long as the power delivery isn't being handled by the Arduino it's relatively safe to control even several hundreds of LEDs, but as I noted in my comment, he should have soldered the 5V connector to VIN on the Arduino, so that the LEDs never try to take current from the Arduino
@imagiro1963 3 роки тому
Thanks for sharing your skills, great looking design and detail explanation for the project! Great job, keep going ahead!
@Msc7532 4 роки тому
Awesome tutorial - you provide lots of handy details! keep up this quality!
@zmast333 4 роки тому
That's brilliant, thumbs up for me. Well thought out. I suggest you look into improving the soldering though, many of those joints look terrible :(
@DavidSoderstrom 3 роки тому
24h support says hello! :D
@MacBaerFFM 4 роки тому
Now that's a nice one! Thank you for preparing this video.
@iaidoman 2 роки тому
You Sir are a genius. I have not long had my printer, and am so so at electronics. But I think I will have this done my Xmas. I will be starting at the beginning of December.
@kevbou911 4 роки тому
I love the project and the idea the only thing I wish is that you made 4 "full number" instead of 3 "full number" and 1 " I number"
@2e0txe 4 роки тому
Easy enough to modify the code and turn it into a 24 hour clock. Which is what I'm going to be doing :D. Just started the 3D printing now!
@francescoterracina1882 4 роки тому
@@2e0txe since I'm just starting with the basic of coding would you give us the 24h code?
@kevbou911 4 роки тому
@@2e0txe well yeah maybe ... but I'm a big O in coding ... tried one time and fuck the Arduino all the way up XD but feel free the make one ... will be glad to add it :D
@allinone-bb7rq 4 роки тому
@@2e0txe did u complete
@bestamerica 4 роки тому
hi B... ' i do love electronic LED kits and projects
@jaysonesguerra 4 роки тому
This was really excellently made and I will definitely be abusing access to my friend's printer for this
@DIYMachines 4 роки тому
That's what friends are for. :)
@clifffton 4 роки тому
Come on and join us in the 3D world. It is fun!
@DaveDGRGray 4 роки тому
Fantastic project! Just as I'm about to move my home office/man cave into a bigger room, this will look fantastic in there! Amazon order... Done! :)
@wertertwertwet 4 роки тому
Really nice project and well prepared. What I love most is the clear way you describe everything, with your diagrams and your calmness. Liked it really much.
@DIYMachines 4 роки тому
Thanks. :)
@gig78000 4 роки тому
First I was like "wait... There is a digit missing", then I remembered that it was in an English format and the last digit is either a 1 either null. :D
@svenskatabbar1519 4 роки тому
Had the same process in my head.
@gioarca6623 4 роки тому
how true ahhaha i was like w8 how will it say like 8 pm .... ahahahha
@TheKapteinkoek 4 роки тому
A 24h version mod wil be doable
@alexanderhackner 4 роки тому
I've already built mine with a 24h layout and it works fine! :D
@GenPat90 4 роки тому
@@alexanderhackner what did you change and add for 24 hour time?
@philipvonbahr7616 2 роки тому
This looks absolutely awesome! One question though, any way to expand this to make it use a 24hour time format instead of 12?
@DIYMachines 2 роки тому
Yes, absolutely is, take a look at these ones: www.thingiverse.com/thing:4207524/makes
@xter13 2 роки тому
@@DIYMachines Thank you
@mcmach1 4 роки тому
Dunno how I got here but very thorough video, so many skills on display here, good work.
@johnvodopija1743 3 роки тому
Wow! This is a brilliant project. Thank you for sharing 👍😎🇦🇺
@petermcfly5260 4 роки тому
This is very awesome!!! Thank you for sharing this :) Is there a way to use the clock in 24h format (edit the code)?
@hiabst 4 роки тому
I moght be able to code that let me see, ill update you if i am able to
@CaliHomie 4 роки тому
@@hiabst hey! :) I will be extremely grateful if you share a code for 24h clock with me.
@Stuphi99 3 роки тому
Same Here this would be awesome!!! Thanks for this great build!!!! 👍👍👍 please add the 24h Version
@ridi7182 2 роки тому
u have to print a extra digit also!!
@jerryhalasz 4 роки тому
No 24-hour clock? Nice work though!!
@DIYMachines 4 роки тому
Thanks. I decided not to go with 24 hours to keep the overall length of the shelving shorter for where I was going to install it. There are enough LED's remaining on the roll to make it a 24hr clock as apposed to 12hr if you wanted to. You would just need a larger backboard and to print some more supports and sleeves. The code will also have to be slightly adapted.
@nicoretuas 3 роки тому
@@DIYMachines Could you maybe do a video about it? If not, im just building the 12 hour clock, because i love it.
@colbewells1487 4 роки тому
Thisis awesome! you've got a follower out of me! i'd love to try this at one point! I also THOROUGHLY enjoy the level of detail it makes it damn near impossible mess something up!
@danpage7198 4 роки тому
Not only is this really cool but you created an incredibly easy to follow guide! If you are ever after an idea for a future project check out the clock clock, a digital clock made up of analogue clocks. I would love to see a build guide for one of them!
@DIYMachines 4 роки тому
Wow, clock clocks look cool. I've added it to my ever-growing list of project ideas. Thank you for the suggestion.
@dantea.cabreran.6946 4 роки тому
:sob: i'm working something exact like this (is taking me a few years) but using MM5314N and ULN2803 istead or Arduino, well the classic way (Arduino did not exist when i start it):smile:
@teodoranthony2409 4 роки тому
@@clairevyanse5645 The started to become popular in 2014 tho. Just because there were released on 2005 doesn't mean everyone had access to one in 2005.
@vince7783 4 роки тому
@@teodoranthony2409 There were tons of people using them, and dozens of books/guides etc. at early as 2007. They were pretty much popular instantly.
@teodoranthony2409 4 роки тому
@@vince7783 Maybe where you life. But I remember those thing becoming popular around 2014 before that you would have to search for such thing. I'm not that much into this scene so lets not discuss any more about this. You might be right.
@teodoranthony2409 4 роки тому
@@clairevyanse5645 "...Just because there were released on 2005..." Did I imply that? Learn to read. I'm not here to do that for you.
@vladen14 3 роки тому
"Looks great, I'll try that one" Needs 3 D printer "ok nvm"
@thorthenoob2588 3 роки тому
I've been letting my graphics card mine bitcoin and about to cash it in to buy a 3d printer... a good hobby level printer is from $400 to $500 and you can turn around and make money with it on etsy
@timmturner 3 роки тому
@@thorthenoob2588 A Creality Ender 3 is a great 3D printer and it's less than $200 The simple shapes needed for this project can easily be printed with most any printer.
@zillieness Рік тому
Super informative. It's so cool to see 3D models used in real life.
@Offcut55 3 роки тому
Very precise and well worth the watch. Now I so wished I could afford a 3D printer.
@ericrand6276 4 роки тому
I am thinking, how many weeks will the 3D printer be running.
@MrJc1337 4 роки тому
DO NOT run power from your arduino. Neopixels can require up to 30mA/LED and an arduino nano is certainly not able to provide such power for strips. Always use an external power supply when powering multiple LEDs.
@MichaelBransonCoach 4 роки тому
The Arduino isn't supplying the 5v, they all share the power from the wall adapter. The data line is a not a power source.
@user-if3qb9bs2s 4 роки тому
And also has been pointed out at 11:30?
@SetKat-Alex 4 роки тому
@@MichaelBransonCoach it's supplied through computer USB, that's not great too!
@sabinemayermayer 4 роки тому
Like @Set Kat mentioned, USB power (from a PC) is not sufficient for this many LEDs. A standard USB port can provide around 500 mA so this would mean 15-30 Neopixels (depending on the exact type) so < 1 meter. Only if you can guarantee that they won't be on at full brightness can you connect more than that. Otherwise you might fry your USB port (especially on cheap PCs, ports on a higher end PCs are usually protected).
@LoopikCZE 4 роки тому
@@sabinemayermayer no, he means that Arduino output is max. 30mA. You should use some transistors for controlling LED strips.
@user-kq7qm3hv7d 2 роки тому
3D digital electronic clock, very creative artistic design. cool.
@proofhead 3 роки тому
This is probably the one best and most complicated project Ive ever seen
@DIYMachines 3 роки тому
Thanks Mesut, very kind praise!
@1JKWorld 4 роки тому
What was the total cost (Time and Money) of the project?
@hadycandra6193 4 роки тому
i wanna know it too..
@davebacknolaliki1452 2 роки тому
I spent quite a bit..north of $350 usd but I also didn’t have a soldering iron or certain things so if you have all the necessary tools you can expect it to be less. Also depends on the wooden backboard you decide to use. I got a nice piece of maple and that was roughly 1/3rd of my cost as lumber prices arnt necessarily cheap right now.
@siniquezu 3 роки тому
Watched this knowing full well I'm never going to make it
@klakpin 4 роки тому
Thats really beautiful. Cool project!
@willianandredeoliveira9737 4 роки тому
I love it. Great Job! It looks fantastic!
@distracted8950 4 роки тому
Your word of warning is pretty wrong! If you power all those leds only from usb, you will most likely kill your arduino You wont damage anything by powering the arduino by the powersupply and the usb. So please do exactly the opposite and not plug in only the usb while having this many leds connected! Otherwise love the project
@DMcQueary 3 роки тому
So, I am currently (ha) trying this, i think i may have killed 2 arduinos. I am trying to put the code on the arduino prior to connecting to the LEDs and main PSU.
@Hellsong89 4 роки тому
Cool but why to use so much additive manufacturing(3D printing)? Amount of filament used is pretty hefty when with slight chances to design one can make it out of wood much cheaper. Also never trust just a glue to hold your wires in place if it goes outside of the project casing, like mains power wire. Tie a knot on the wire, or use zip ties to make physical blocker to prevent wire being pulled. You can use glues to improve and seal the hole. In optimal install never leave more than 1mm2 of copper exposed to prevent accidental shorts. On screw terminal ideally you cut the wire and solder join it together with hear shrink tube, so if future if sold to person who i jack ass its obvious that it low voltage application, so they wont just screw the mains plug and burn whole thing. So is this 12hour clock? and is there option to make it 24 hour one in code?
@adalmartinez2340 4 роки тому
When can we see That design from you
@xbb6408 3 роки тому
Pure genius idea, would love to have this thing in my living room
@DIYMachines 3 роки тому
Wow, thanks Xbb. :)
@pboston6RR 2 роки тому
Fantastic -project and EXCELLENT description and presentation. ThankYou
@HCDVelcra 3 роки тому
Nice example of "DIY" that people would like to do but then it starts with 3d printer and youre out......
@HCDVelcra 3 роки тому
#bullshit
@SaltyMikan 3 роки тому
Title "3D printable" Comments "What, a 3D printer?? I'm out"
@Unexxpected 3 роки тому
Those 200€ for my "Ender 3" printer has been my best investment over the last years. I printed loads of cool and/or useful stuff that can´t be bought nowhere!
@bloccoaspirale1867 3 роки тому
You don't need to use a 3D printer to build a similar clock/shelf. Take the idea and apply it to a construction method that is available to you.
@ViciousXUSMC 3 роки тому
@Billy West Right now in 2020 what is a good one to buy so you can do just about any small tech DIY project? I am just so not in the know when it comes to 3d Printers I would hate to buy one to find out it cant print the kind of material I need to use or has some other limitation. I hear about the Monoprice printers a lot.
@MrRevenant333 4 роки тому
Now redo the thing for the normal world where there is a thing called 24h format for clocks.
@nipunbhalla 4 роки тому
MrIngnorant333 I live in the normal world where 12hr format for clocks is a thing. I hope you are not one of those elites that use 24hr wall clock and wrist watches.
@MrRevenant333 4 роки тому
Nipun Bhalla in which normal world ist 12h clock Format a thing? Be realistic man. It’s only more complicated.
@nipunbhalla 4 роки тому
Aahhh MrIgnorance... If you were realistic, you could already have searched around internet to find who all use 12hr format but nevermind.
@MrRevenant333 4 роки тому
@@nipunbhalla i did. Only the USA and Australia, and some small countries. So, most part of the world seems to be clever enough to use the right format for time.
@qfurgie 9 місяців тому
doing great work man
@98808 3 роки тому
This is next level DIY tutorial videos, diagrams and all very well captured. Thank you!
@DIYMachines 3 роки тому
Thanks Rafa
Projects with Red
Переглядів 47 тис.
Костильов Онлайн
Переглядів 140 тис.
Серіал К.О.Д.
Переглядів 563 тис.
Lukas Deem
Переглядів 607 тис.
The process of mass-producing LED Signboard with high-performance 3D printers.LED signboard in Korea
king process
Переглядів 738 тис.
Ivan Miranda
Переглядів 345 тис.