How to build an Autonomous UAV for Long Range FPV & Waypoint Missions - Lightweight UAV
Переглядів 376,911
9 місяців томуHow to build an Autonomous UAV for Long Range FPV & Waypoint Missions - Lightweight UAV
This is the Silver Guardian UAV // Tractor Configuration flying with a 4S 5000mAh LiPo Battery, flying +45km total distance per charge and ~120mAh/km efficiency (matching efficiency numbers of my Peace Hawk LR+ // V-Tail Pusher) - The Lightweight Carbon Boom makes it quite light and aerodynamic improvements of longtitudinal wing-holders and a custom Aero-Nose/Hatch make the aircraft quite aerodynamic. I'm very happy with the result and will follow this video up with information about the iNAV Flight Controller and the Autonomous Capabilities.
Matek F411-WTE Flight Controller: s.click.aliexpress.com/e/_m0p...
iRotor 5010/750kV Brushless Motor: s.click.aliexpress.com/e/_onn...
Hobbywing 40A ESC: s.click.aliexpress.com/e/_okD...
12x6 Propeller: s.click.aliexpress.com/e/_Eu7...
MG90S Servo's: s.click.aliexpress.com/e/_oCK...
Beitian BN-180 GPS: s.click.aliexpress.com/e/_oE6...
5.8Ghz 600mW Video Transmitter: s.click.aliexpress.com/e/_Eyj...
@AeroStuffFPV 9 місяців тому
*Link to the Electronics* Matek F411-WTE Flight Controller: s.click.aliexpress.com/e/_m0p... iRotor 5010/750kV Brushless Motor: s.click.aliexpress.com/e/_onn... Hobbywing 40A ESC: s.click.aliexpress.com/e/_okD... 12x6 Propeller: s.click.aliexpress.com/e/_Eu7... MG90S Servo's: s.click.aliexpress.com/e/_oCK... Beitian BN-180 GPS: s.click.aliexpress.com/e/_oE6... 5.8Ghz 600mW Video Transmitter: s.click.aliexpress.com/e/_Eyj...
@kgchrome 9 місяців тому
your links are broken... the full product ID is truncated, i believe.
@simonnaughton2272 9 місяців тому
Did I miss a link to the strobe light and controller?
@dagobb 9 місяців тому
@@simonnaughton2272 me too!
@justvibinghere2092 9 місяців тому
@@kgchrome click the links in the video description, those work for me
@FelixRisingOriginal 9 місяців тому
The links in the video description all work... just these ones in the comments section are dead.
@hcpsmansdddeglm 9 місяців тому
is no one gonna talk about how cool it looks when the tail of the plane is connected to the body by a single/double rod?
@MCsCreations 9 місяців тому
It's pretty elegant indeed!
@dwang085 9 місяців тому
Very cool
@kotnapromke 9 місяців тому
При ударе о землю такой хвост легко ломается. У меня это было при жесткой посадке.
@redskyz483 9 місяців тому
No they are not
@ArabObserver 9 місяців тому
Impressive
@riovonstahl2869 9 місяців тому
Niceeee!! im really digging you are getting more innovative! love the carbon tail boom! and love how you are inproving the aedodynamics on your models! :) its getting exciting!
@dominiq4343 9 місяців тому
I'm impressed, well made wing mounting and overall design! 10/10.
@davidmuirhead5117 8 місяців тому
flown a week ago , very stable in flight a joy to fly ,thanks a lot
@wa389 9 місяців тому
Beautiful plane and a very professional video. Keep up the great work. Thanks for sharing.
@narnasqueneth 9 місяців тому
That's actually a really nice build- thanks for sharing!
@AeroStuffFPV 9 місяців тому
Glad you like it!
@jasonbell5905 9 місяців тому
Very nice and clean work! Excellent model , great video!!
@lovebirdlab 9 місяців тому
Hi Nathan. Thanks for acknowledging me as a donor. This is an impressively simple and efficient drone. I'm sure we'll be building some of these and experimenting with different modifications. The build video is excellent: it covers everything in detail. Your flight performance numbers are great. A DIY custom li-ion battery pack would indeed extend the flight time and range nicely. I like the idea of a rear-mounted video cam that would have a fully unobstructed view of the ground. I'm eager to see the upcoming iNav settings video for this drone: I need to learn how to use iNav. Keep up the great work, Nathan!
@franciscourena5636 9 місяців тому
Can I get 150 km Range distance with a 6s 25,000 mAh battery ( 2.6 Kg) instead of 4s 5000mAh LiPo Battery????
@ivanpateli524 5 місяців тому
you probably could, but you have to check your local laws, bc in most places UAV's that are able to fly over 100km are banned for civilians@@franciscourena5636
@mohannadmalik5373 8 місяців тому
very nice build I learned a lot from it, thank you!
@prathameshkalaskar9250 9 місяців тому
Just loved those amazing drone shots!!!
@nickvledder 9 місяців тому
I am impressed!
@DoctorMangler 28 днів тому
What a really great DIY project. You've done such a nice job all the way through. I like your use of carbon combined with foamy. I'm mostly from a 250 quad obstacle course background, and I've been exploring options to relay both video and signal from a mostly autonomous relay drone in a pattern. Thanks for the great video, the scenes you filmed of your bird in flight were really great, must have been a hell of a lot of fun rewarding work.
@iangraham6730 9 місяців тому
Great job! Love the ariel footage!
@AeroStuffFPV 9 місяців тому
Cheers😎
@jojo-._. 9 місяців тому
you built a darn Impressive plane there sir!
@edobeirne 9 місяців тому
Way to go brother!
@AsgardStudios 9 місяців тому
Excellent design and video. Thanks for sharing!
@AeroStuffFPV 8 місяців тому
Thank you! Cheers!😎
@khidaral-mukhtaar7327 5 місяців тому
Fantastic performance!✅
@user-io7gw2mq3k 5 місяців тому
Great video, this is aweome. The plane look so simple. Love it
@chickwithstick7695 6 місяців тому
Great looking plane...thanks for sharing 👍
@LoudandclearRC 5 днів тому
Sweet looking plane! Just started watching and had to comment.
@scottiniowa1 9 місяців тому
Love it! Going to have to build one of these too after how well your other plane I built flies!
@AeroStuffFPV 9 місяців тому
Cheers!😎 Good luck
@mikewofford2198 9 місяців тому
Thank you so much for the tip on the plastic card
@AeroStuffFPV 9 місяців тому
Cheers!😎
@redfirekla 9 місяців тому
this looks so much like the bf4 drone as part of the sniper kit very cool
@masboyrc 9 місяців тому
Great video, this is aweome. The plane look so simple. Love it 👌
@AeroStuffFPV 9 місяців тому
Cheers!😎
@masboyrc 9 місяців тому
@@AeroStuffFPV cheers.. 🍻 and greetings from indonesia 🇮🇩
@Yelnats101 8 місяців тому
outstanding!! thanks for doing this vid, it exactly what i was looking for
@AeroStuffFPV 8 місяців тому
Thanks! Good luck if building one.
@Yelnats101 8 місяців тому
@@AeroStuffFPV I already got the airframe marked and cut out mostly. The electronics is what I was questioning. Wanted to go cheapish I will probably add flexible lightweight solar panel cells to the wings and a charge controller. See if we can’t push those flight times
@user-lx8px2uv3w 2 місяці тому
This is an impressively Keep up the great work. Thanks for sharing.💯💯💯💯💯💯
@MyTube4Utoo 9 місяців тому
Very cool! Thanks for the video.
@AeroStuffFPV 8 місяців тому
Cheers!😎
@amilcarandrade396 9 місяців тому
Thanks!
@allansmits9621 8 місяців тому
Looking forward to your video on iNAV set-up on this plane…I followed your video and have the plane about 90% complete. Getting close to installing the FC and receiver. Thanks!!!
@AeroStuffFPV 8 місяців тому
Awesome man, please send videos or photos if you have any to my IG, I love to see it (IG: aerostuff.fpv) I’m currently on holiday and will be back in about 1.5 weeks, then I’ll edit & upload the iNAV and flight video!
@allansmits9621 8 місяців тому
Will do, thanks! Hope you're enjoying your holiday!!! @@AeroStuffFPV
@Jay-zc7iq 9 місяців тому
Very nice work sir , I’m currently putting together a long range ranger 2400 but I think I’ll do some test runs with this plane , I like it , think I’ll substitute brackets holding things with my 3d printer for boom and stuff but all in all a great build and look forward to giving this a try 👍👍🙏
@AeroStuffFPV 9 місяців тому
Cheers😎 Good luck!
@tariqbaloch3926 6 місяців тому
@@AeroStuffFPV I am from Pakistan how I buy this material plz help me I want make a fpv
@strackx86 9 місяців тому
Love it, congrats. Gonna build one when you upload the video about the inav settings.
@AeroStuffFPV 9 місяців тому
Awesome. Stay tuned
@davidmuirhead5117 9 місяців тому
built one maiden flight today , brilliant video build Nathan😀
@AeroStuffFPV 8 місяців тому
Thanks very much! Do you have any pictures or videos you can share? (Instagram: aerostuff.fpv) would love to see it
@technicalsupport6983 9 місяців тому
Wow 😮 nice 👍.....I will make this prototype very soon
@MCsCreations 9 місяців тому
Fantastic work, Nathan! Beautiful airplane!!! 😃 A tip that perhaps could help... A good replacement for the plastic cards is PVC. You can make PVC sheets from PVC pipes, in many thicknesses, depending on the size of the pipe. You know? I use to make them from 75mm and 100mm pipes. Just cut a piece that can fit your oven, make a vertical cut, then heat it and put between 2 flat surfaces (and some weight). And that's it. It's easy to cut, glues amazingly well with CA and hot glue and so on. 😊 Anyway, stay safe there with your family! 🖖😊
@AeroStuffFPV 9 місяців тому
Thanks! I don't have PVC's near so I just buy cards in units from AliExpress
@MCsCreations 9 місяців тому
@@AeroStuffFPV Oh, interesting! I didn't know they sold those! 😯 But anyway, the PVC is used for water and sewage pipes in construction. Well, at least here in Brazil... But if it's easy to find the cards, there's no need for it. 😊
@MrGcastorena 3 місяці тому
Old credit cards are made of PVC
@rverm1000 9 місяців тому
not enough videos like this on youtube
@sreejiths2702 9 місяців тому
Good job 👍
@adrianlee30 9 місяців тому
Good stuff, loving it!!!
@AeroStuffFPV 9 місяців тому
Cheers!
@cicADA001 9 місяців тому
very nice
@Jimminy-Crickets 3 місяці тому
ayo, i love the way you use plastic cards to add strength to the plane, a lot better than using barbecue skewers lol
@dronepilot260rc 9 місяців тому
I love this design 🎉
@AeroStuffFPV 9 місяців тому
Thanks!
@frankdearr2772 9 місяців тому
hello, great video , thanks for sharing :) 👍
@AeroStuffFPV 9 місяців тому
Cheers!😎
@terrylembke8100 9 місяців тому
Beautiful , bird . Good job
@AeroStuffFPV 9 місяців тому
Thanks!
@AerialWaviator 9 місяців тому
Great design and build video. The minimalist design is good looking and the specs seem to offer exceptional capability. I like your longtitudinal wing-holders design. Am however a bit worried for your camera seeing it hanging under the tail. (might be abused by terrain when landing?) Thinking a pan on top of the vertical fin, might make for a nice perspective.
@AeroStuffFPV 9 місяців тому
Thanks Waviator! My camera is protected by a plastic-card fin that protects the camera and the rest of the tail.
@amitkumar6784 9 місяців тому
Very stable 😍
@nevo1311 9 місяців тому
great as always kepp going
@AeroStuffFPV 9 місяців тому
Always!
@pranaykumar8305 2 місяці тому
Very cool!
@amandeepdroid 8 місяців тому
Watting for next update
@koroshjashnani 7 місяців тому
great bring.
@RelentlessHomesteading 2 місяці тому
Clever wing attachment mechanism.
@luisamarchetti9059 9 місяців тому
At least someone with the right brain. A simple, efficent, pragmatic and inexpensive airframe, no stupid flying wings, canards and so on.
@AeroStuffFPV 9 місяців тому
Cheers!😎
@peter360adventures9 9 місяців тому
Awesome.
@hxl6162 9 місяців тому
Bro Your Channel Rules, no "secrets" congratulations, best regards from Brazil
@AeroStuffFPV 9 місяців тому
Cheers!😎
@sumonsinha9722 Місяць тому
great, very useful
@AeroStuffFPV Місяць тому
Glad to hear that!
@dayyanhanif8493 9 місяців тому
build soaring autonomus long range-durability UAV man thats cool
@andreyl2705 9 місяців тому
wow project, as always)
@AeroStuffFPV 9 місяців тому
Cheers!😎
@RCDUDEFPV 9 місяців тому
Well done and Thumbs up
@AeroStuffFPV 9 місяців тому
Cheers!😎
@SerheiYatskevich 9 місяців тому
Дизайн как всегда на высоте! Верхнее положение хвостовой балки позволило безопасно разместить камеру внизу, а двигатель, обдувающий переднюю кромку крыла, облегчает взлет самолета. Отличная идея!
@Andrey_Gysev 7 місяців тому
Интересно, насколько возможно покрыть крылья плёнкой солнечных элементов, сейчас, вроде, выпускают такое, чтобы увеличить длительность полёта? С установкой вместо FPV камеры обычной камеры что снимки делает - такой планер можно было бы отлично использовать в геодезических и геологических изысканиях. У нас студенты разрабатывают что-то похожее и даже прототипы используются в степях Астрахани.
@SerheiYatskevich 7 місяців тому
@@Andrey_Gysev Пленки солнечных элементов? Хотелось бы узнать об этом поподробнее. Если можете, дайте ссылку, чтобы изучить их характеристики. Для увеличения продолжительности полета можно запрограммировать автопилот на отключение мотора, когда планер входит в восходящие потоки (термики). В сочетании с солнечными элементами это может дать хороший эффект.
@Andrey_Gysev 7 місяців тому
@@SerheiYatskevich Помню в Литве производство налаживали, но сейчас не могу найти конечных продуктов. Одни новости про разработки, разработки. Надо поискать.
@medamine1035 9 місяців тому
hi i like the design , can you please give us a tutorial how to design an aircraft ? i want to build one from my imagination :D
@TERRYB0688 Місяць тому
Hi interesting build, you might check out an old light weight air craft we used to build, it was called a Ben Buckle, generally a large wings man a deep wing cord, they when the next step on from a powered glider
@Rothammel1 9 місяців тому
awesome my friend
@AeroStuffFPV 9 місяців тому
Cheers!
@GhostRyderFPV 9 місяців тому
Sir, I love seeing another build up from 'ya, the production quality belies the economical roots of the build, and always a _chill good time._ I wonder, though, if maybe incorporating a carbon wing spar would be a wise (minor) investment? RDQ is a great source. I've laminated foam FT-style wing spars (3:45) in the past with good results, also. There's a bit of wobble at the root, and a good amount of work and TLC I worry for ~¿ô
@AeroStuffFPV 9 місяців тому
Much appreciated!
@maxwildgeese 9 місяців тому
Good👌✌️👏ottimo lavoro molto e dettagliato il miglior video di sempre grazie 👏👏👏👏👏👏
@AeroStuffFPV 9 місяців тому
Cheers😎
@Graybear78 9 місяців тому
Could you share where you get your depron foam? We have been unable to find it. Thank you.
@Glenn.J 9 місяців тому
Great video Nathan. Can you please make launch videos of the maiden, and in general launch videos of these planes?
@AeroStuffFPV 9 місяців тому
Stay tuned for the coming flight video
@carlosperez7015 2 місяці тому
Awesome!!! Congratulations! I have almost everything to build except the strobe lights. Any link i can follow?
@he_soy_am 9 місяців тому
After that video moscow never sleeps
@user-di8il8ks5i Місяць тому
Thanks for sharing. Ideas to economise further, diy boom rods e.g. any type woven fabric, canvas, cotton; coat with pva glue or epoxy resin (poor-mans fibreglass) e.g. wrap fabric around the chosen mould, coat with glue or epoxy resin. Other ideas; make tubes, box sections from printer paper or re-purposed cardboard tube, plastic PVC pipe form ( might require mould release) - coating methods; dip it /brush on/ foam roll/spray. Use similar method to bond all connections and structural reinforcements.
@user-di8il8ks5i Місяць тому
ukposts.info/have/v-deo/cZ1yrImnbp2EuaM.html
@TheCoryReport 8 місяців тому
Love the work you are doing, I am very inspired to make similar planes. So firstly thank you for posting this stuff because it is so helpful. I want to ask, what is your reason for not designing any kind of landing gear? The main thing I wonder is how bad it hurts aerodynamic efficiency for even really light non-retractable gear? Not that this plane needs gear obviously! You and many others clearly do great without it but I am just very curious what your thoughts are since you have so much experience. Thanks again!
@AeroStuffFPV Місяць тому
Thanks man! Weird I see this awesome comment 6 months later. The main reason of not using landing gear is additional drag & weight. Since my planes are under 2kg and have an ESC with 'brake' settings (preventing spinning propeller at touchdown) they are designed as 'belly landers' meaning, hand-launch/fuselage-landing. If I design a plane with greater weights than 3kg, then I'm def. using landing gear
@thegoosefpv201 9 місяців тому
Great plane. Have you though about making it a twin tractor? Maybe I’ll try it
@AeroStuffFPV 9 місяців тому
Would be too nose heavy - Making it a twin pusher (motors behind wing) is a better solution
@basemandog Місяць тому
Excellent video Question: where can i get the carbon tubes? And what sizes for the boom and wings spars?
@morifpv6441 8 місяців тому
It looks like great plane. Would you be so kind to share your Inav 6.1 settings?
@AeroStuffFPV 8 місяців тому
Cheers!😎 It’s in the next video. Stay tuned!
@realmadrid5239 9 місяців тому
how about uploading a video about explaining the design calculation involved in it .would be a great content.
@allansmits9621 9 місяців тому
Can you link me to a video of your that shows how to join the two wing halves? Also, do you have any alternative ways to attach the wings to the fuselage?
@AeroStuffFPV 9 місяців тому
See: Armin wing build video - or Peace Hawk Part 3 for wing attachment
@sebastiangiray3614 2 місяці тому
im a beginner at UAV. do you have tutorials in how to create the system and the things that needs to be program?, because in the video it shows only how to create the aircraft but not how does the system is built. i hope you can help me as i am passionate to be part of this hobby. THANK YOU!!!!
@user-pl8gu9qq5x 8 місяців тому
How do you rule, but a sail and a tail that has a rotation that has not appeared
@sherwoodp2738 9 місяців тому
Where did you get the beacon/strobe light? Would you provide a link? Also, would it be possible to get a copy of your config file too? Thanks!
@AeroStuffFPV 8 місяців тому
All on AliExpress (Links are shared)
@amessiah_ 7 місяців тому
Any plans for diy instruction?
@justintango2196 8 місяців тому
I Need this blinking led. Do you have a link from this led ?
@jamalcrick1500 9 місяців тому
How far from the back of the fuse did you start the opening to hold the wing?
@ogurchik006 7 місяців тому
how do you land it without damaging the propeller? And can I use dji o3 air unit with this build?
@edmundaspagareckis7141 9 місяців тому
Hi Nathan, maybe you have blueprints of this aircraft, because i am trying to build my first one using your video, but there are few gaps where you dont mention/ show dimensions of certain parts, thank you.
@AeroStuffFPV 9 місяців тому
No blueprints, sorry. Gaps are left out because some are deleted, leaves room for own design/improvements
@jorgeantoniovaldez2270 8 місяців тому
Hola que medidas tiene el avión de largo?
@wezob4569 9 місяців тому
Bro excellent build but i was wondering if in a future video you can touch on the soldering that has to be done in order to prepare your flight controller for installation. Because that's the only thing that is keeping me back from investing in my first programmable flight controller. Much appreciated.
@simonnaughton2272 9 місяців тому
Wait, so you’re flying all direct control from the receiver today?
@AeroStuffFPV 9 місяців тому
Thanks! There are plenty of videos about that on the internet (How to solder a flight controller) - If you want a flight controller that you don't have to solder - I'd recommend getting the ZOHD Kopilot Lite. I've been using it since approx. 3 years and it's still solid these days!
@wezob4569 9 місяців тому
@@AeroStuffFPVi do have a zohd Kopilot and I'm contemplating moving on to a programmable flight controller for fpv. So i just wanted some insight on what is required in order to make one fully operational namely what needs to be soldered etc. Your builds are what i use as my reference hence the reason I'm asking you.
@Rubydude 7 місяців тому
Hey, amazing video. Im looking to build a long range rc plane. I was wondering what range you get with the receiver and transmitter linked in the description. Thanks
@AeroStuffFPV 7 місяців тому
My build get’s beyond 7km
@bruceharnden5742 8 місяців тому
DO you have demintions/plans I can find?
@muzamiltahir5742 8 місяців тому
How much did it cost
7 місяців тому
hi Where did u buy Beacon Strobe Light? link pls
@jszewczyk 8 місяців тому
Hi Great project! What is material for a plane. Is it depron?
@AeroStuffFPV 8 місяців тому
Thank you! Yes, wings are from depron 5mm but fuselage & tail is 5mm foamboard
@allansmits9621 9 місяців тому
Very cool…keep the videos coming. I plan to build one of your plane designs, BUT where can one buy the Depron you use for the super light wings? If you’ve published that somewhere, I apologize for asking.
@AeroStuffFPV 9 місяців тому
Thanks man! I got it from an EU site I can't remember - You can search for XPS Foamboard as well for a lightweight wing
@allansmits9621 9 місяців тому
@@AeroStuffFPV Thank You! I’ll check out XPS online and report back.
@StockiRC 9 місяців тому
Hello, I'm from Brazil I appreciate your videos, could you teach me or just tell me which batteries you use to make your lithium packs, I saw someone videos saying that most have bay discharge and that attracts, Thanks a lot for the videos.
@AeroStuffFPV 9 місяців тому
I’m flying LiPo, not Li-Ions yet
@AeroStuffFPV 9 місяців тому
Cheers!😎
@raphajeb2181 5 місяців тому
Hey. What about a camera setup with zoom on this uav ?😁
@nicolemarrizeomnes2183 8 місяців тому
hi how faran this plane reach? newbie here
@rahadyanmuhammad271 5 місяців тому
Hi Is it neccesary for us to use ELRS receiver and radio for Long Range Autonomous?
@mitseraffej5812 9 місяців тому
Reliance on GPS navigation is a weakness for military applications. A mix of inertial and terrain mapping and recognition is required. The sensors for the terrain mapping also need to be both radar and optical. Match this with A.I. target recognition and selection and you have a winner.
@AeroStuffFPV 9 місяців тому
Indeed! This design is solely for FPV - But can be optimized for other applications (military, coastal observations, etc..)
@benjaminleedy 9 місяців тому
Have you considered using any 3D printed parts? I realize you are a skilled builder, but I feel like some key parts could be printed to provide more elegant solutions, such as the attachment points for the tail boom.
@AeroStuffFPV 9 місяців тому
Yes 3D printing is the major improvement yo my builds but I don’t got the finances yet to invest into a 3D printer and it’s melting plastics - Full time student priorities to keep things as affordable as possible
@benjaminleedy 9 місяців тому
@@AeroStuffFPV Yeah, I certainly understand that. If you weren't 8,000 km away I'd volunteer to print and send parts, heh. When I have the finances to buy the electronics for one of these I'll see if I can implement some 3D printed parts and share my experiences.
@THEMADFLYER 2 місяці тому
How long you been in the hobby my friend? good work😮
@davidlee50 6 місяців тому
Do you have full size patterns of the airfoils? .
@javierlaragarcia3637 Місяць тому
Hello, I find this video quite fascinating. Your drones look amazing and incredible. I intend to make one like the one in this video, but I want to make it smaller, around 80 to 100cm from wingtip to wingtip instead of the 160cm you used. Now, for the distance of the carbon fiber tube, should I use the same measurement? Also, with the rear stabilizers, can I use the same measurements, or should I shorten them by a few centimeters? If so, how much would you recommend shortening the distance of the carbon tube (distance between the wings and the rear stabilizers), and how much would you recommend the rear stabilizers measure? Haha, I hope you can answer me.
@AeroStuffFPV Місяць тому
I appreciate your comment! If you downscale the wingspan, downscale everything with it (stabilizer, fuselage, carbon tailboom) The downscale percentage for your build (assuming 100cm wingspan) is 62.5% - With that percentage, downscale the fuselage length & stabilizer dimensions as well. - Good luck!
@javierlaragarcia3637 Місяць тому
@@AeroStuffFPV Thank you very much! One last question, do you think that with a A2212 motor and 1045 propellers (10x4.5") I can achieve pushing a UAV with the same dimensions as the one you use in this video? Thanks!
@bertrandgb2010 6 місяців тому
Hi, I am impressed by your design! congratulations 👍👍👍. I have a question regarding the center of gravity (CG) : did you manage it to get it under the wing ? thks, Bertrand
@AeroStuffFPV 6 місяців тому
Thanks! The UAV isn’t flyable if the CG isn’t under the wing! It’s 25-33% from the leading edge.
@bertrandgb2010 6 місяців тому
Thanks
AeroStuff FPV
Переглядів 27 тис.
Факти тижня
Переглядів 290 тис.
Студия Квартал 95 Online
Переглядів 400 тис.
Суспільне Харків
Переглядів 449 тис.
AeroStuff FPV
Переглядів 167 тис.
AeroStuff FPV
Переглядів 14 тис.
Факти тижня
Переглядів 290 тис.