IMPRESSIVE! This is a good lesson on 'If there is a will, there is a way', and you don't need a garage full of tools to get the job done.

So it just methodical and deliberate work with the lever, pulley and inclined plane as our friends. Such a smart lady.

Thanks for taking the time to share. Very simple technique for breaking down pallets, as already mentioned elsewhere, without a garage full of specialist tools. I've got a pallet sitting outside as I write - came with a delivery of OSB - and I think I'll give your method a go right now.

Now that's what I call "smart working". And I like how you used the tools you restored to dismantle the pallet, another thing I appreciate about your videos is that you don't play annoying background music like most UKpostsrs do, most of the time I won't even watch a video more than 1 minute if there is annoying background music, thank you.

That is a great method that keeps the wood as intact as possible, I really like it. Thanks for sharing!

Best video for simple yet strategic pallet deconstruction. Worked wonders! Thank you for sharing!

Really smart, no fancy tools, perfect for me and exactly what i need. Keep it up!

this is genious. it may be a bit nooisier tha using a "pallet buster" but its a lot cheaper, perfect for peopple starting with pallets.

I wanted to do it like this today but my pallets have small space in between so my wooden blocks were too big, i have to do another palette tomorrow and i think it's worth cutting some blocks for the purpose. Thank you :)

Very clever idea, congratulations. Thank you !

You so rock Lady!!! Thanks so much for the pointers! I will definitely do this method for the skids I've been procrastinating on disassembling

Excellent!

Ur the best I've seen, got me beat, and I'm crafty thanks

Little girl, big hammer does the trick every time! Go girl!

Probably the best way I've seen anyone do that. Tysm.

This is amazing! Easy method with bare essential tools. Thank you!

Very easy. Thanks a lot for sharing.

Amazing video thank you for sharing. So satisfying seeing those boards lined up in the end. Great work, the effort is worth no split boards :D

Brilliant yet simple. Thanks!

Awesome, you go girl

Perfect. Easy way and no power tools.

That is most ingenious way to do this. Thanks for sharing

Nice and easy method, little bit similar how i dismantle pallets. Very Good job for a lady. Thanks for sharing

Seems line a easier way then i do with a pallet breaker bar. Hmmm gonna cut some pieces tomorrow and try it your way. One thing tho. I do have a new denailer and am itching to use it. 😂😅😂😅😊

Smartest outhere! Thank you!

Very smart!

The best idea !! Perfecto !!

You wouldn't mind doing some more DIY projects out of pallets?

You handle that big mallet like nothing, respect.

Wow, I just did those 1/2 hour ago, it took me a lot more than 1 or 2 hits, perhaps the nails are not the twisted type nails.

Worked like a charm! Im a straight woman not a creeper, I just wanted to say... I wish I looked that cute while working!

I would never argue with a lady who can handle a heavy hammer like you. Why don't you make a low stand to put the pallets on, to same kneeling. Good video

Awesome video thanks… work smart and not hard.

Best ever

Omg this is so smart

Hi this is great! I need to try this. How many pounds (or kilos) is your sledgehammer?

You are my hero

No I haven’t looked at the comments yet, so maybe someone has said this but first I wanna say I’m an old guy, so I’m not bending down and crawling around on the floor and playing whack-a-mole with these pallets I was fortunate enough to find one of those pry tools on Facebook marketplace for 30 bucks so it was worth it for me.however, I would suggest for her to maybe make some kind of table and then find a piece of wood, log enough that extends the entire length of the pallet and cut, however many other little prop boards that she needs, so she just hast to put everything in once wacko slide him to the middle wackos pull the big board out, stick a little prop boards on the other side and take care of the other side. I think I’d save her a lot of time. Again, I haven’t read the comments so if somebody’s already said this, forgive me. Good luck to you young lady. It’s always good to see people utilizing resources that are available mostly for free and turning them in to something useful.

Methodically removed those nails. I like it!👍

How long did it took you?

Молодец, рпекрасно расправилась с поддоном. С удовольствием подписался, ну и лайк 👍

Tried that, it didn't work for me. All the pallets where I am have twisted nails in them, and do not come out easily at all. Unfortunately.

Nice

That's good if you got a concrete floor but try doing the same thing on grass

I usually hate people commenting security concerns, and now I am doing it myself… when I was a child, I did something similar and managed to run a rusty nail right through my hand. Dad drove me to hospital, mum bought me a LEGO-ship for being so brave… :-) Please, get yourself in the habit to put wood with nails in it always “face down“, so the nails point to the ground. The day WILL come you are just steping back for reaching that screwdriver and… someone has to get you a LEGO ship. And those are expensive!

WaAaw!!!

I like it but the nails in my pallets are all bent over and nailed in the opposite side of the nail head

how to strip a pallet with simple cheap tools (un-powered) in just over 10 minutes

✌️✌️✌️🌹🌹🌹

I found an easier way to do it then what you're showing your way works good too but this is got a long handle on it you don't have to bend over as called a pallet buster

I like it but I’m an old man so the bending over and the extra time it takes to be knocking the nails out on the floor and stuff probably wouldn’t go this route I usually cut the nails too about an inch or two and then knock them out it’s a lot easier the girl had great skills though

Knew there must be a better way.

By George I think she's onto 🤔something

Not so easy if the nails are spiral or ring shank which is more common. Easy if straight plain old 8d nails were used.

There is something for everyone on Stodoys plans website.

Well done! Seems like a lot of work just for some nails.

you can't use this method on epal pallets. they're very tough

Now If only someone could Invent a machine that does this? :) could earn extra $$$ :)

Isnt this black part mold? And how do you use such wood if there is mold on it? Can you simply put it into a thicknesser? Wont it then go into the air and when working in a small room without a lot of fresh air this could be really bad for the health no? I also today disassebled a pallet that looked better but similar at some points and im not sure how to handle those.

u're cute & smart.

The girl who can carpentry is attractive asf in my opinion

but also time-consuming

Your putting me to shame.

not very quick is it now ,well quick in the eyes of a woman