I have to say that I think that this is an absolutely brilliant video for a first timer like myself! I sincerely prefer these videos over the "DIY" experts on youtube that every single tool in the world, just so happens to be in their garage type of videos.Well done. I am MOST DEFINITELY trying this

he is just pointing you in the right direction thanks for the vid

No bad. An interesting and different way of doing things. Although I do think wood was very flimsy. I'd use, at least, 1/2". But I definitely learned something here and I can add it to my repertoire of knowledge.

Great Video.... I'll definitely be doing this in my 96 LaSabre.... That music is going to be in my head all day.... La La, La La...

I really like this install and it's very achievable! Thanks for showing all the steps!

I think your video is awesome, i have built an amp panel with your video as a guide and i must say, my panel came out awesome, better then what i expected. Thanks for the great video.

Awesome video man, this helped a lot. One thing that I personally think would look even nicer would be a thicker wood, routed out a bevel to flush some plexi and light up the Amp:) I'm a sucker for the plexi/neon though. This is SUPER clean.

Hey man nice work I've been searching a long time on UKposts of a flush mount amp rack and finally I came across this one and you show step by step process of how to do it others fast-forward through it playing music and not showing you actually what they do I appreciate it sir!!

Thanks for the video. I'm actually working on my amp rack tonight and got the two amps sitting one on top of the other with the top amp angle in a little due to the wheel well. I couldn't figure out how I wanted to mount the rack to the vehicle securely and have it still look clean. I really like your flush style carpeted fabrication. It's also easy to access the wires still when needed to because its mostly pressure fitted. Great idea. My only tif was that you ended up covering the heatsinks with the 2x4's. Anyway, after watching this video, I feel inspired and motivated again after hitting that wall. Thanks brotha

Love it Looks clean . Not just an amp hooked up and wires crazy all over the the place in the trunk . Very professional work. Looks as if it was factory that way . A person wouldn't mind having intalled if it would looks like this. I would mine for it to stay in the car this way. Great job!!! .

I just finished my installation! Thanks to your video. It came out clean! It took awhile but I didnt want to rush the process of screwing anything up. I want to send it to you

thanks for the video it was very informative I'm doing my caddy the same way. I'm using Alpine mrv old school boom. All of your videos give me motivation. keep up the good work.

Great video!!! I will be mounting 2 4 channels on each side of my trunk with my mono block mounted in the middle of the backside of my trunk. All thanks to this video! Keep up the good work bro!

Very creative and wonderful job, well done to you my man, something I'd certainly try, love the fact that there is space behind to run the wires and hide them.

My dude great job, l was literally looking for away to mount mines. Thank you so much bro.

A great video nice job! The flush mount looks great! My 2 amps are mounted on both sides but aren't flush mount I'm installing a 40" x 18" x 15" enclosure duel 12's. The problem is my amps are about 43" apart so if I flush mount them it will look way better and give me about 3" on each side👍

Your choice of words makes my day sir. Great video even better commentary

Nice interesting project. I was wondering about ventilation though, my amp is a lot bigger, while the boot (trunk) is much smaller.

Great work man, love the clean look that it gives off like if it came that way from the factory, absolutely brilliant....

Thank so much for this info is very helpful I'm so tired of my trunks looking the way they Good job on recording your video and most definitely your is amazing looks very nice

Wow That's was fast and easy.....Great job!!!!

That looks awsome so clean, Im trying to do something similar on my car.

Awesome 👏 looks great 👍 Thank you for sharing your project!!!

Great! I am going to build one for my 2007 mustang. Outstanding Thanks

nice video Lessco, do you have any instructions on how to flush mount amplifiers or electronic crossovers in the rear fold down seat backs?

I like this installation, my only question to this is how it held in place especially if you should hit a bump or pothole in the road???

you're a good teacher! excellent final results!

Very helpful vid!! Definitely gonna change a few things in my own process, but looks nice..well done

Love the clean install , im ocd and it works for me :)

A cheap way to make a good amp board, I'm thinking of doing this. Great video 👍🏽.

gonna do this hak to make my amp look great will posy it on here for you mate! great work

NICE man!!! Thanks for the idea!

Exactly what I needed. Thanks for the upload

and to think that I was gonna pay someone a few hundred bucks to do this............I'm doing this myself next weekend!!!!! GREAT JOB!!!!!

Looks really Good. Hey is that a Chrysler 300 ? just curious. But I have to re carpet my entire trunk because the liner is kind of out of shape and I don't like how its loosely sitting around the wheel wells and all that I want to have it All carpeted nice and tight and do what you did for the Amp

Very nice I will try this soon. Would love the extra floor space.

Was looking to mount my amp nicely, i think ill do the same. I have a 2002 honda accord. Great video, and enjoyed the music. P.s. I dont think will cause overheat issue, the top face of amp is exposed. If it does overheat ,just put a fan back there and maybe trim some edges of the board for flow.

Keep practising. Lots!!!!!

Hey I tried what you did I changed a few things but you gave me a good guide line to follow

nice man. i need to make a rack for a sundown scv2000. definitely need something propping it up for fan to pull air

Cool. Thanks for the idea

Good stuff. Thanks for the inspiration.

omg this dude is a hero in his own mind laughed so hard i watched this video twice

Hey do you have a video were you Show or teach how to wire up the dorm light to go off with the parking lights when the alarms going off

Great job and great tutorial. It's a pity I could only like this video once! Thanks bud! Instant sub for you! 😎👍🏼

Looks good. Thank you for the video.

great video buddy! thanks for taking the time to create and share this.

That looks awesome!! good job on that..

Does the Amp fabrication ever fall over when you make a hard turn? I didn't see you mounting it to the body. I know you said tight fit would hold it in but still. Just asking. Let me know

Hi, i love your videos man, i need your help, i dont realy understand about rms and watts, a frien of mine give me a power acoustic model # cpt2-900, its a 900 watts 2 channel amp , i know how to do the connections, i just need to know what subs to buy for this amp, i dont know how to much it up, i have a 2009 dodge ram 4 doors. I will like to put a box with 2 subs under the rear seats. What type of subs do i need ? I hear that if i bridge the amp i get the mos power out of it, can you tel me what i need ? Thanks in advance..

the thumb pic looks really good, i thought the build was going to be that good, turned out to be a flimsy piece of wood... why not 1/2 mdf? and also a solid support behind instead of two small blocks of wood?

Nice job man 👌🏼

Good work.. simple but elegant.

V. well done!!!

Look so clean That’s a good job 👍🏻

awesome video

Did you like the adhesive in your hands lol Hey I got a question. Does the panel pop off when you gotta make a hard turn? I mean the video is very good I like the idea but I feel like the amp will push the whole panel out when you make a turn with that weight on the amp

Nice made

AWESOME WORK

Thank you very much ! your explanation is very useful ! and simple !

Cool video and I learned something new 👍

good job bro a+

Looks good bro. Nice job

Been looking for vid like this. Thanks bro

Great job 👌

Nice work!

lol you didn't like it give a like any way. Cool project I just like seeing people creativity make me more motivating

Nice Work!

Good vid, gave me ideas on how to hide my amp and build a side wall for my sub.

Looks nice. Well done

Great videos. Thumbs up. Subscribed. I have a single cab truck and I'm debating whether to put two or one sub speaker. What do you recomend? (personal use only) Thanks

damn, that's some nice work. Never thought to use luon or however it's spelled, that's a great idea.

Fantastic thanks.

your work is clean brah

Where do you get the grey material for the trunk?

Nice job looks clean

respect for doin your own

I've been waiting for a video like this!!!! I just ordered the USB charger from your last video from your eBay store can't wait to install it. would it be safe to keep the existing OEM and run the new one at the same time would it be safe and still functional?

Great ideas

Great video! I want to make one now!

Hes got the right idea but now needs to perfect it. I wouldnt use Lauan board its just not firm enough. Good introduction video.

looks nice mam! great job

Excellent Superb !

Nice build

very nice!! ima give this a shot!!

He took the words out of my mouth when he said like a glove

How do you mount the wood to the side panel?

Good work man

very very cool!! I will try, thx!

Looks great nice job

Nice work I think I'll do something like that on my 2000 4runner

AWESOME!!!!!!

Looks good man

Looks good Bro nice match with the trunk liner material. It looks a lot like factory which is the style I like. If you have a couple of minutes check out the iPad I installed in my truck dash. Great video!

Nice, question, what holds finished panel in place?

looks good

Wow looks hella clean

what did you use, or how did you mount the entire piece onto the car??

Respect to thr tryer...

hey how is it holding up