How To Make A DIY Arduino Line Follower Car At Home

  Переглядів 871,451

DIY Builder

DIY Builder

5 років тому

Hello Guys, In this tutorial, I am going to show you how to make a DIY Arduino Line Follower Car. So let's get started :)
Subscribe It's Free bit.ly/2WlyA8Y
------------------------------------------
Updated
Code and Circuit Diagram: bit.ly/2PoRUlb
------------------------------------------
Here's the parts list:
(Banggood.in)
1) Arduino Uno - bit.ly/2Fz8M4q
2) Motor Driver Shield - bit.ly/2VWaYsn
3) Wheels (4x) - bit.ly/2suQJEY
4) TT Gear Motor (4x) - bit.ly/2Rtg2G9
5) Infrared Sensor - bit.ly/2k70nNi
6) 18650 Li-on Battery (2x) - bit.ly/2CZabQ7
7) 18650 Battery Holder - bit.ly/2sulLwu
8) Female Jumper wire -
9) Acrylic Sheet - (Offline Store)
10) DC Power Switch - bit.ly/2FtyEzs
(Amazon.in)
1) Arduino Uno - amzn.to/2B8fdYL
2) Arduino Motor Driver Shield - amzn.to/2OKizcz
3) TT Gear Motor and Wheels Full Set - amzn.to/2IuY6o6
4) Rubber Wheels(4x) - amzn.to/2Iv1krI
5) TT Gear Motor(4x) -amzn.to/2oeovjm
6) IR Sensor(2x) -amzn.to/31YTmPw
7) Ultrasonic Sensor - amzn.to/35dFoes
8) 18650 Li-ion Battery(2x) -
9) Battery Holder - amzn.to/2Iv1krI
9) 5mm Acrylic Sheet - (Local Store)
[Flyrobo.in]
Arduino UNO :bit.ly/2m8HZnL
Motor Driver Shield : bit.ly/2mvO7XL
Wheels : bit.ly/2kxPeFF
TT Gear Motor : bit.ly/2m4fMid
Infrared Sensor : bit.ly/2mv8Uuo
Female Jumper wire : bit.ly/2mu0aVo
------------------------------------------------------
More Arduino Car Related Projects
1) Arduino Human Following Robot - • How To Make Arduino Hu...
2) Arduino All-in-one Robot - • Arduino All-in-One Robot
3) Arduino Metal Detector Robot - • How To Make DIY Arduin...
4) Arduino Obstacle Avoidance Robot - • How To Make A DIY Ardu...
5) Arduino Voice Control Robot - • How To Make DIY Arduin...
6) Arduino Gesture Control Robot - • How To Make DIY Arduin...
--------------------------------------------------
Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE
----------------------------------------------------
➤Here my social sites:
Facebook: / surajit.maju. .
Instructables: www.instructables.com/member/S...
twitter: / diybuilder1
Instagram: / surajit_majumdar
-------------------------------------------------------------
🎧 Background Music:
Morning by LiQWYD / liqwyd
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Morning - LiQWYD (No C...
Polaroid by extenz / extenz
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Polaroid - extenz (No ...
Always (Vlog Music) by Dj Quads / aka-dj-quads
Music promoted by Audio Library • Video
----------------------------------------------------------
#ArduinoLineFollowerCar #ArduinoProjects #ArduinoSmartCar

КОМЕНТАРІ: 969
@aplicarciencias
@aplicarciencias 4 роки тому
Great job! Congrats! Thanks for sharing.
@zainrei4917
@zainrei4917 2 роки тому
Good video and also good coding. Thank you very much for your wonderful work. Still i have a question. Do i also need to supply the arduino with a 5v battery or only the motor driver? The dc motors run faster if i supply the arduino with a seperate supply but i do not know if this is safe or does it damage the arduino module.
@GEXO1000
@GEXO1000 2 роки тому
Great video. It is a great project for my school exhibition!
@deepakbains6755
@deepakbains6755 4 роки тому
Sir please create video of all in one i.e Bluetooth control ,line follow and obstacle avoidance..your work is clean clear and great
@naweednawshard7792
@naweednawshard7792 4 роки тому
finally one with uno and motor shield. Thanks a lot bro, you are a lifesaver
@akshara7679
@akshara7679 2 місяці тому
Same
@akshara7679
@akshara7679 2 місяці тому
I am also making as first and I want to use a motor shield
@ELECTRONICAPROGRAMACIONYROBOTS
@ELECTRONICAPROGRAMACIONYROBOTS 3 роки тому
Que buen proyecto! Y sin decir una sola palabra 🦾
@helloworld9057
@helloworld9057 2 роки тому
I got a already built chasis and i can see small 4 wheels ahead of the motors connected there beneath the chasis. Would it make any difference ?? If i follow your steps what changes i need to make ?
@thebikeracer
@thebikeracer 4 роки тому
very cool Way to keep it super light!
@nabilsellami2707
@nabilsellami2707 5 років тому
Thank you. keep uploading this kind of videos. Very useful and easy to make. Don't forget to upload the .ino file
@devansh6816
@devansh6816 4 роки тому
drive.google.com/file/d/1lddLLnkmZmYjjvB-nVPX45FV_P5i783T/view
@davxachatryan9371
@davxachatryan9371 3 роки тому
Hi, Can You advice me where can I find robotic exercises?
@bolt_zz0
@bolt_zz0 4 роки тому
As again great video bro your all videos are 👌👌👌👌👌👌👌👌🔥🔥🔥🔥🔥🔥💯💯💯💯
@Hi_i_am_akanksha_
@Hi_i_am_akanksha_ Місяць тому
Best video of line follower in all the UKposts channel
@maheraboraia333gmaher9
@maheraboraia333gmaher9 4 роки тому
You are very honest man and you did aperfect work
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks
@ngopidirumah1510
@ngopidirumah1510 2 роки тому
For those who seems doing the tutorial correctly but the robot keep moving straight, do this step: ADJUST YOUR IR SENSOR POTENTIOMETER TO LOW, keep it adjusted between reading surface and stop when crossing black line, @diy builder didn't explain it, but this is very important step
@kazakrishnabharadwaj3410
@kazakrishnabharadwaj3410 2 роки тому
How that car will run
@kazakrishnabharadwaj3410
@kazakrishnabharadwaj3410 2 роки тому
By keeping that battery will it run automatically
@rockstarrumbles5307
@rockstarrumbles5307 2 роки тому
can you explain it clear please i have the same problem
@varshithr3228
@varshithr3228 Рік тому
@@rockstarrumbles5307 did you figure it out ??
@varshithr3228
@varshithr3228 Рік тому
my car won't run from the battery is there anything i can do to rectify it
@ahsdgaming8094
@ahsdgaming8094 Рік тому
Thank you for uploading this. I made the same Arduino project. It's very useful.
@swaritsworld2188
@swaritsworld2188 4 місяці тому
Is that working
@mahinahmedtasmi1273
@mahinahmedtasmi1273 4 роки тому
Now this seems real easy to me.thanks man
@justsomepotato1554
@justsomepotato1554 2 роки тому
well, did you get your answer
@justsomepotato1554
@justsomepotato1554 2 роки тому
if you did can you please tell me because I do not know
@alexyouou7560
@alexyouou7560 2 роки тому
@@justsomepotato1554 What do you want exactly to know?
@justsomepotato1554
@justsomepotato1554 2 роки тому
@@alexyouou7560 i finished my project and I completely forgot what I wanted to know Thanks for responding though
@lakshyaautomotive
@lakshyaautomotive Рік тому
@@justsomepotato1554what problems did you faced
@eliasmedelsosa9175
@eliasmedelsosa9175 4 роки тому
Thank You So Much
@narindersingh4706
@narindersingh4706 6 місяців тому
My ir sensor lights stay green and the car is not moving… I need help it’s for a school project 😢
@anindyaghosh1762
@anindyaghosh1762 5 місяців тому
Bro there is a screw just rotate it a bit it will work.. By rotating the screw you can adjust the range of the IR sensor 🤞🏼
@King-yo6fc
@King-yo6fc 4 роки тому
it is very good but i have some problem with the jump wire because i'll have to buy female to female jumpwire
@SanketThakral
@SanketThakral Рік тому
hey! Thank you very much for this project and Can Upls tell that the battery u used is of how many MAH
@aaravraj9943
@aaravraj9943 5 років тому
hey bro can you make a video on how to fix the l293d motor shield because mine is not responding
@sumantakumardutta986
@sumantakumardutta986 3 роки тому
In the video, he has forgot to remove the jumper, while connecting external power supply to the shield. But how on earth did it work?? I think your shield will work now.
@paolojavier4960
@paolojavier4960 2 роки тому
is there a difference between the arduino uno ATmega328P? or I should purchase the exact model posted in the description box?
@nIkI_nazarov
@nIkI_nazarov 7 місяців тому
No, you can use either
@neerajbaruah1749
@neerajbaruah1749 4 роки тому
Hey are all the codes nd library given and is there any extra folders needed to be downloaded??
@muhammads_editz
@muhammads_editz 2 роки тому
@DIY Builder Are this robot follow all kind of trackes or only that one's which shown in video. Are your code for this is able to follow other trackes or only this one's???
@kethaboga-a1071
@kethaboga-a1071 4 роки тому
Is it possible to use dynamo as an replacement of TT gear motor??
@zahriyasameem3325
@zahriyasameem3325 3 роки тому
No
@milenperera2068
@milenperera2068 3 роки тому
Try it with balti car
@Pulse.x
@Pulse.x 2 роки тому
Step 2: Hardware Installation Hardware Installation Hardware Installation 1. Assemble the 2WD Smart Car Chasis 2 Wheels 2. Connect the IR sensor to Analog to Digital and Comparator Module IN1 > IR Sensor 1 IN2 > IR Sensor 2 IN3 > IR Sensor 3 IN4 > IR Sensor 4 3. Then, connect the output pin to Arduino UNO analog pin OUT1 > A2 OUT2 > A3 OUT3 > A4 OUT4 > A5 4. Connect Vin to 5V and GND to GND in Arduino UNO 5. Then, connect the motor driver pin to Arduino UNO pin IN1 > D10 IN2 > D9 IN3 > D6 IN4 > D5 6. Connect the both motor to motor driver Motor A > Right motor Motor B > Left motor After completing the connection, connect the Arduino to power supply with USB cable.
@kalilinux1825
@kalilinux1825 4 роки тому
Great project
@jeffinjosephidicula3573
@jeffinjosephidicula3573 3 роки тому
How we can add intermediate stations or intermediate stops in between track?
@amitbarman7861
@amitbarman7861 5 років тому
Wow😲Amazing bro
@kawaiii555
@kawaiii555 2 роки тому
Hello! Thank you for making this fantastic video but I somehow cannot open the code. Can you please re-send it? That would be really helpful, thank you!
@gulabgabhane4113
@gulabgabhane4113 Рік тому
It will not be opend in mobile, it will open in laptop having Aurduino ide
@mohamedamaan7459
@mohamedamaan7459 2 роки тому
Hello! Thank you for making this fantastic video
@DIYBuilder
@DIYBuilder 2 роки тому
Glad you liked it!
@bidyos7885
@bidyos7885 7 місяців тому
@@DIYBuilder can I have the complete set of code for this. Ty
@rishikesh7371
@rishikesh7371 3 роки тому
Can we connect 4 ..12v dc Johnson motor with 12v power supply on it
@saurabhs3843
@saurabhs3843 4 роки тому
It's really important to me
@joshyough9293
@joshyough9293 3 роки тому
Hello! Thank you for making this fascinating project! I want to make a project similar to this, but the motor drivers on Amazon do not have pin headers where you plugged in the IR sensors at timestamp 3:03. Did you solder pin headers into your board on the lower right side?
@ashwin4369
@ashwin4369 2 роки тому
Yes we should just solder it to attach the pin headers to the motor driver board!!!
@joshyough9293
@joshyough9293 2 роки тому
@@ashwin4369 Thank you for the reply! I actually figured out how to do so and made a robot similar to this one :)
@ashwin4369
@ashwin4369 2 роки тому
@@joshyough9293 great to hear dude. All the best
@helloworld9057
@helloworld9057 2 роки тому
@josh I'm trying to build one would you help me in ? plz drop your email then. I really want to learn but I'm a beginner and nothing is looking understandable to me. Im confused :(((
@iamharshittt
@iamharshittt 2 роки тому
Yes bro but you must female to male jumper cables...... (Male ones into the motor shield Female ones into the IR sensor)❤️
@sunithaharish8253
@sunithaharish8253 4 роки тому
What you have put to the table that black strip
@adityamadbhavi5081
@adityamadbhavi5081 4 роки тому
after a single line path if there are two paths to the left and right side then where will it goes???
@user-wn3nh4ec2g
@user-wn3nh4ec2g 5 років тому
Great you make it an awesome way.
@hirenkanojia5438
@hirenkanojia5438 4 роки тому
Bro I have a problem the line following robot is responding to every object instead of black only i tried to change the potentiometer reading by rotating the cube but nothing happens
@abhishekbagva5110
@abhishekbagva5110 4 роки тому
Try to change the intensity of ir sensor 😁 and brother never use ready made ir sensor coz there vulnerable to light... Better try to make your own one.. And it's really a easy task to make one...
@realitycheck816
@realitycheck816 2 роки тому
This is amazingly well done
@yoyo1140
@yoyo1140 Рік тому
how your arduino is powered? for me the battery only power the motor shield
@kyrofromgahool2009
@kyrofromgahool2009 2 роки тому
Dank u wel meneer for info. I'm studying HBO university. They asked on the first course to build a car that follows the line and avoids obticles i dont know what to build. At least here you showed from what to start. Thanks
@DIYBuilder
@DIYBuilder 2 роки тому
you're welcome
@hemanths2780
@hemanths2780 Рік тому
@@DIYBuilder please send code we are done with this and need code
@iam.aindiangamer9572
@iam.aindiangamer9572 Рік тому
Which course
@fatimahtasneemsamiha5737
@fatimahtasneemsamiha5737 Рік тому
Hello sir, your video is very informative but I unfortunately cannot access the circuit diagram and code. It will be very kind of you to help me regarding this issue.
@bhaumicreations3571
@bhaumicreations3571 2 місяці тому
Same here
@electrojects7236
@electrojects7236 3 роки тому
So cool video editing sir ,brilliant👏👏👏
@DIYBuilder
@DIYBuilder 3 роки тому
Thank you so much 😀
@mustafamerchant3676
@mustafamerchant3676 4 роки тому
Sir if we put an obstacle between car and a line so car will stop or not? Please answer as fast as possible!
@azanahmad9305
@azanahmad9305 4 роки тому
sir there are alot of errors in ur code plz upload the correct code..
@electronic7979
@electronic7979 5 років тому
Very good project 👍
@crazyanimenerd5273
@crazyanimenerd5273 2 роки тому
can you make the line follower with color sensor module.
@wilsongomez5047
@wilsongomez5047 Рік тому
como calibra lo sensores lo arme pero simpre va en linea recta grasias
@tuannguyen2990
@tuannguyen2990 4 роки тому
Would you please provide the code for this build that doesn't have to follow the black line ? I'm building one to go on a pre-build track that's 5ft wide and 10ft long rectangle . The track has 1 ft wide and about 2 ft rectangular round-abound in the middle
@habidqazaizada7733
@habidqazaizada7733 4 роки тому
خلاقیت حدی مرزی نمی شناسد عابد قاضی زاده
@NuzrathSir
@NuzrathSir 2 роки тому
Its in the description, check the 2nd link from the top, from the Google Drive you can download it.!
@sticky9705
@sticky9705 2 роки тому
Hello, your video is so clear and well edited and I have made this project. The problem I have is the robot is just moving forward and not following the line, can you suggest me some areas I may have done a mistake so I can correct it and make it work😃
@kazakrishnabharadwaj3410
@kazakrishnabharadwaj3410 2 роки тому
Bro how will the robot move by keeping the battery will the car move automatically or we need to have any control or switch??
@sticky9705
@sticky9705 2 роки тому
@@kazakrishnabharadwaj3410 it will just move man.....
@kazakrishnabharadwaj3410
@kazakrishnabharadwaj3410 2 роки тому
@@sticky9705 but by keeping battery also it's not moving
@kazakrishnabharadwaj3410
@kazakrishnabharadwaj3410 2 роки тому
@@sticky9705 may be I need to dump the code before and then the car will move I guess.
@advaithkrishnap4146
@advaithkrishnap4146 Рік тому
ADJUST YOUR IR SENSOR POTENTIOMETER TO LOW, keep it adjusted between reading surface and stop when crossing black line
@sudheerdodamani100
@sudheerdodamani100 2 роки тому
Can I use dc motor instead of wheel gear
@nurizzatulfarhani1672
@nurizzatulfarhani1672 3 роки тому
If do line follower car using PLC,its components are still same?
@aeffendiibrahim2562
@aeffendiibrahim2562 5 років тому
easy to understand, another cool DIY Arduino project form you Mr. Surajit! 👍👍👍
@exactly.3732
@exactly.3732 4 роки тому
bro my model is not moving even after I bugged codes in it pls give me an idea I'm in hurry
@DIYBuilder
@DIYBuilder 4 роки тому
contact me on instagram
@ikhsanshd_
@ikhsanshd_ 3 роки тому
thanks bro, i will share this video
@sarkarglobal4547
@sarkarglobal4547 4 роки тому
will it work with other motor driver
@madhavanj5489
@madhavanj5489 4 роки тому
Help, will this speed is sufficient for competitions
@shawetabhardwaj9044
@shawetabhardwaj9044 4 роки тому
Hello Sir, I tried doing same, however, it is going straight. I have checked code and circuit both, which seems fine. Please help me.
@DIYBuilder
@DIYBuilder 4 роки тому
Adjust the sensor potentiometer value
@meghamandekar4889
@meghamandekar4889 4 роки тому
Have you got the code then plz also provide me
@HariKrishna-mr5jm
@HariKrishna-mr5jm 3 роки тому
@@DIYBuilder where to adjust the potentiometer value please reply
@nguyenthanhhoan4223
@nguyenthanhhoan4223 3 роки тому
can you send me code. thank in advance
@HariKrishna-mr5jm
@HariKrishna-mr5jm 3 роки тому
@@nguyenthanhhoan4223 it's already given in the description bro
@putradiyro7442
@putradiyro7442 4 роки тому
Thanks a lot bro
@keeratsingh929
@keeratsingh929 4 роки тому
Hello sir can I directly power the adrino board instead of the motor driver ?
@DIYBuilder
@DIYBuilder 4 роки тому
no
@arjunchauhan3210
@arjunchauhan3210 5 років тому
brother i want code for that
@monaa9116
@monaa9116 4 роки тому
can you please upload the code! I need it quickly!thanks
@janardhandukka9414
@janardhandukka9414 4 роки тому
Do u have code please send me
@anbazhaganpooswamy2219
@anbazhaganpooswamy2219 4 роки тому
It is in the information
@pink_panther5166
@pink_panther5166 Рік тому
How fast in the motor used in your robot? Can we order this along with the code?
@DR-jl6fm
@DR-jl6fm 4 роки тому
will it be ok if our chassis is slightly bigger!?
@vikhneshar104
@vikhneshar104 3 роки тому
The Arduino code that you given below is not gong to work the values of the IR sensor is wrong & THEIR WAS A LOT MORE MISTAKES one of them was the read command but non of them will show up as errors which feels like this is intentional & the code given the description is different from the one he is using
@ashishmark0038
@ashishmark0038 3 роки тому
Did u got the right codes ???
@nikhil-pr7yn5pf1c
@nikhil-pr7yn5pf1c 3 роки тому
Plz copy paste the code here sir plz
@baraagendy68
@baraagendy68 3 роки тому
I think now it is okay because he wrote updated
@lygiahuy8944
@lygiahuy8944 3 роки тому
yes me too the sensor go crazy
@wafflegam1ng642
@wafflegam1ng642 3 роки тому
@NikhilVarma I'll try to do so but it is extremely difficult. You have to pause and resume at short intervals.
@hpcreations1011
@hpcreations1011 5 років тому
Which software do you use to edit the videos?
@vishalba4156
@vishalba4156 4 роки тому
Supper great job Bro 👌
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks bro
@STEMROBOTICS
@STEMROBOTICS 4 роки тому
can we do this program using scartch
@foysaldhali2852
@foysaldhali2852 4 роки тому
Can anyone please give me the code of this arduino programme?
@devansh6816
@devansh6816 4 роки тому
drive.google.com/file/d/1lddLLnkmZmYjjvB-nVPX45FV_P5i783T/view
@karangarg2085
@karangarg2085 5 років тому
You should upload the code too here only. As without code your video is of no use.
@syedmuhammadhassanali6809
@syedmuhammadhassanali6809 11 місяців тому
I strongly agree with you
@user-qt7pm1uv4h
@user-qt7pm1uv4h 9 місяців тому
Yeah, me too.
@nehamehta9143
@nehamehta9143 6 місяців тому
Code is there in description
@vishalm7691
@vishalm7691 3 місяці тому
Well said bro
@gwerror983
@gwerror983 3 місяці тому
Yes
@goncaloteixeira1717
@goncaloteixeira1717 3 роки тому
i would like to know if its possible to do the montage without the Motor Driver Shield?
@guillaume8437
@guillaume8437 2 роки тому
Unfortunately, motors require too much current for a MCU so you have to get a power output somewhere... Now you can make your own, or you can find the component of your choice... There are many of them that do the same operation, maybe in different way. So if the question is about the technical aspect, yes you need to adapt power. If the question is about cost and you want to find alternatives, there may be some!
@The_tv_indian
@The_tv_indian 5 років тому
Can you help me in making a maze solver based on ir and arduino
@The_tv_indian
@The_tv_indian 5 років тому
Any one can help me
@anukritsharma1798
@anukritsharma1798 5 років тому
@@The_tv_indian yes
@axominsane5242
@axominsane5242 5 років тому
Hey Bro plz give the code its veey urgent
@Pulse.x
@Pulse.x 2 роки тому
For this tutorial, we requires these items: 1. Arduino UNO 2. 2WD Smart Car Chasis 2 Wheels 3. Arduino Mini DC Motor Driver Dual H-Bridge PW Control (L293D) 4. IR Line Tracking Sensor (4 bits) 5. Battery 6. Double side tape 7. Wires 8. Jumper wire 9. Black tape Add TipAsk QuestionCommentDownload Step 2: Hardware Installation Hardware Installation Hardware Installation 1. Assemble the 2WD Smart Car Chasis 2 Wheels
@Pulse.x
@Pulse.x 2 роки тому
Step 2: Hardware Installation Hardware Installation Hardware Installation 1. Assemble the 2WD Smart Car Chasis 2 Wheels 2. Connect the IR sensor to Analog to Digital and Comparator Module IN1 > IR Sensor 1 IN2 > IR Sensor 2 IN3 > IR Sensor 3 IN4 > IR Sensor 4 3. Then, connect the output pin to Arduino UNO analog pin OUT1 > A2 OUT2 > A3 OUT3 > A4 OUT4 > A5 4. Connect Vin to 5V and GND to GND in Arduino UNO 5. Then, connect the motor driver pin to Arduino UNO pin IN1 > D10 IN2 > D9 IN3 > D6 IN4 > D5 6. Connect the both motor to motor driver Motor A > Right motor Motor B > Left motorStep 2: Hardware Installation Hardware Installation Hardware Installation 1. Assemble the 2WD Smart Car Chasis 2 Wheels 2. Connect the IR sensor to Analog to Digital and Comparator Module IN1 > IR Sensor 1 IN2 > IR Sensor 2 IN3 > IR Sensor 3 IN4 > IR Sensor 4 3. Then, connect the output pin to Arduino UNO analog pin OUT1 > A2 OUT2 > A3 OUT3 > A4 OUT4 > A5 4. Connect Vin to 5V and GND to GND in Arduino UNO 5. Then, connect the motor driver pin to Arduino UNO pin IN1 > D10 IN2 > D9 IN3 > D6 IN4 > D5 6. Connect the both motor to motor driver Motor A > Right motor Motor B > Left motor
@rakshitsalwan22
@rakshitsalwan22 4 роки тому
Can we use 2 9volt batteries
@raghavnaikdessai6577
@raghavnaikdessai6577 4 роки тому
Hello sir can I also obstracle avoidance in this robot with the line follower ..pls make a video on it
@abdulmoeed2384
@abdulmoeed2384 3 роки тому
For obstacle avoiding you have to use ultrasonic sensor
@narayanai3775
@narayanai3775 3 роки тому
Don't buy anything from Banggood. I was ordered there items more than 3 months back. still no update.
@sunitaDevi-gs8yn
@sunitaDevi-gs8yn 4 роки тому
Plz send me the code brother
@dineshc5423
@dineshc5423 4 роки тому
can this line follower car work for other color of line other than black
@CLKBEATS
@CLKBEATS Рік тому
What is the material you used to make the chassis
@huynguyenvan5509
@huynguyenvan5509 4 роки тому
can you give me the code, please
@rajrd1368
@rajrd1368 4 роки тому
int vSpeed = 110; // MAX 255 int turn_speed = 230; // MAX 255 int turn_delay = 10; //L293 Connection const int motorA1 = 8; const int motorA2 = 10; const int motorAspeed = 9; const int motorB1 = 12; const int motorB2 = 13; const int motorBspeed = 11; //Sensor Connection const int left_sensor_pin =A0; const int right_sensor_pin =A1; int left_sensor_state; int right_sensor_state; void setup() { pinMode(motorA1, OUTPUT); pinMode(motorA2, OUTPUT); pinMode(motorB1, OUTPUT); pinMode(motorB2, OUTPUT); Serial.begin(9600); delay(3000); } void loop() { left_sensor_state = analogRead(left_sensor_pin); right_sensor_state = analogRead(right_sensor_pin); if(right_sensor_state > 500 && left_sensor_state < 500) { Serial.println("turning right"); digitalWrite (motorA1,LOW); digitalWrite(motorA2,HIGH); digitalWrite (motorB1,LOW); digitalWrite(motorB2,HIGH); analogWrite (motorAspeed, vSpeed); analogWrite (motorBspeed, turn_speed); } if(right_sensor_state < 500 && left_sensor_state > 500) { Serial.println("turning left"); digitalWrite (motorA1,HIGH); digitalWrite(motorA2,LOW); digitalWrite (motorB1,HIGH); digitalWrite(motorB2,LOW); analogWrite (motorAspeed, turn_speed); analogWrite (motorBspeed, vSpeed); delay(turn_delay); } if(right_sensor_state > 500 && left_sensor_state > 500) { Serial.println("going forward"); digitalWrite (motorA2,LOW); digitalWrite(motorA1,HIGH); digitalWrite (motorB2,HIGH); digitalWrite(motorB1,LOW); analogWrite (motorAspeed, vSpeed); analogWrite (motorBspeed, vSpeed); delay(turn_delay); } if(right_sensor_state < 500 && left_sensor_state < 500) { Serial.println("stop"); analogWrite (motorAspeed, 0); analogWrite (motorBspeed, 0); } }
@shanikajayasundara4641
@shanikajayasundara4641 3 роки тому
This is the coad
@shanikajayasundara4641
@shanikajayasundara4641 3 роки тому
Plz reply
@abdellatifpro9665
@abdellatifpro9665 5 років тому
When will you put the code link
@DIYBuilder
@DIYBuilder 5 років тому
Send me your mail id if you need the code
@abdellatifpro9665
@abdellatifpro9665 5 років тому
@@DIYBuilder abdellatifgeek@gmail.com
@Tharusha-du9cz
@Tharusha-du9cz 5 років тому
Tharushanavidu5@gmail.com Plase give me code and digram
@pcislifeandworld3310
@pcislifeandworld3310 4 роки тому
Please give me also a code
@andrewhannaking9402
@andrewhannaking9402 4 роки тому
@@DIYBuilder andrewhanaking@gmail.com Please give me the code too
@shubhangikhadilkar5088
@shubhangikhadilkar5088 2 роки тому
Can you please please please tell me which wires you have used ... Please tell me the link from Amazon.
@AbdulRahman-er3dz
@AbdulRahman-er3dz 4 роки тому
Bro you are doing a great job. But it would be even better if you start arduino programming classes you will be having lot of viewers
@DIYBuilder
@DIYBuilder 4 роки тому
I'll start soon
@bhawnatomar7261
@bhawnatomar7261 4 роки тому
sir i want to make this in my school exhibition pls send code and circuit diagram please it's urgent
@mohammadhassan9527
@mohammadhassan9527 4 роки тому
Have you got code
@virtualacademypro
@virtualacademypro 2 роки тому
Plz share code
@wasifrock687
@wasifrock687 2 роки тому
It's already in the description
@adirah1108
@adirah1108 4 роки тому
Can you upload the code... I need the code
@devansh6816
@devansh6816 4 роки тому
drive.google.com/file/d/1lddLLnkmZmYjjvB-nVPX45FV_P5i783T/view
@devansh6816
@devansh6816 4 роки тому
drive.google.com/file/d/1lddLLnkmZmYjjvB-nVPX45FV_P5i783T/view
@narun4918
@narun4918 3 роки тому
@@devansh6816 the file is not opening
@mineabhi1941
@mineabhi1941 4 роки тому
Is it possible that only two gear motor move on 18650 battery
@vidhyavelip34
@vidhyavelip34 2 роки тому
Sir can u please tell me what that black colour baord called
@techunboxie
@techunboxie 4 роки тому
hey bro i have also dm to insta for code
@ruchijain1466
@ruchijain1466 5 років тому
Pls sir tell the code
@Creation-mv2mv
@Creation-mv2mv 3 роки тому
Watch my video for right code ukposts.info/have/v-deo/sndiZW-QfmOpx6c.html
@jeffr249
@jeffr249 8 місяців тому
can make an flowchart diagram of that?
@farizazahid234
@farizazahid234 Рік тому
how to attach the dc switch to the battery holder?
@sanishdubey4718
@sanishdubey4718 5 років тому
👌👌
@miguelvilla745
@miguelvilla745 5 років тому
friend help me with the arduino code
@Creation-mv2mv
@Creation-mv2mv 3 роки тому
Watch my video for right code ukposts.info/have/v-deo/sndiZW-QfmOpx6c.html
@neelasmani2791
@neelasmani2791 7 місяців тому
Can somebody tell me what's the black type paper as shown in beginning at 0:38
@swarupdaphal6561
@swarupdaphal6561 3 дні тому
Ir sensors are working properly but when its time to turn left or right it just move forwards i try adjusting speed but that doesn't help Give me suggestions pls
@johnallenbundalian594
@johnallenbundalian594 5 років тому
waiting for the links of the codes. thank you in advance.
@DIYBuilder
@DIYBuilder 5 років тому
Send me your mail id
@Tharusha-du9cz
@Tharusha-du9cz 5 років тому
Tharushanavidu5@gmail.com
@wafaatounzi7768
@wafaatounzi7768 5 років тому
@@DIYBuilder wafaa.volunteer@gmail.com me too please
@johnallenbundalian594
@johnallenbundalian594 5 років тому
@@DIYBuilder bundalianallen6@gmail.com. This is my email thank you again
@seriryousra2098
@seriryousra2098 4 роки тому
Seriryousra@gmail.com Send me the code please i need it for my project in my high scool and i haven't time please help meee 😢😢😢
@bibeksapkota641
@bibeksapkota641 5 років тому
sir can you send me code please.
@shan_singh
@shan_singh 4 роки тому
in description
@mdkhairullah8632
@mdkhairullah8632 Рік тому
Thanks bro
@ggnaneshwar3786
@ggnaneshwar3786 4 роки тому
Awesome bro
I made a SUPER FAST Line Follower Robot Using PID!
10:02
Shyam Ravi
Переглядів 267 тис.
How To Make A DIY Arduino Obstacle Avoiding Car At Home
6:09
DIY Builder
Переглядів 4,7 млн
The World's Fastest Cleaners
00:35
MrBeast
Переглядів 79 млн
We should use this amazing mechanism that's inside a grasshopper leg
19:19
Arduino All-in-One Robot
8:29
DIY Builder
Переглядів 1,2 млн
Make a TINY Arduino Drone with FPV Camera - Will It Fly?
20:26
Max Imagination
Переглядів 223 тис.
Line Follower Robot using Arduino🔥
7:01
hash include electronics
Переглядів 456 тис.
The Fastest Maze-Solving Competition On Earth
25:22
Veritasium
Переглядів 18 млн
10 заповедей по пайке. Учимся паять
12:05
inventor aw - This Device is very helpful ,, you can make at home
6:47
Make the TINIEST Line Follower Robot without a Microcontroller!
11:34
Max Imagination
Переглядів 230 тис.
Когда папа - ТРЕНЕР!😃 inst: psawkin
1:00
Petr Savkin
Переглядів 1,1 млн
Спрятал кольцо в вафлю💍
0:50
WORLD TOP
Переглядів 4,2 млн
Їжа Закарпаття. Великий Гід.
1:0:29
Мiша Кацурiн
Переглядів 579 тис.
🤯 Пришлось срочно выкручиваться
0:31
Мария Шортс
Переглядів 1,3 млн
Наступ чи відступ???!!! Така ціна договору??
9:51
Яна Пасинкова
Переглядів 181 тис.