How To Make DIY Arduino Gesture Control Robot At Home

  Переглядів 737,731

DIY Builder

DIY Builder

4 роки тому

Hey guys, In this tutorial I am going to show you how to make a DIY Arduino Gesture Control Robot. You can make this gesture control robot for your science exhibition. So Let's get started :)
JLCPCB with Thanks Giving day (28/11/19 - 29/12/19)
$2 for PCB prototype. Free SMT Assembly Fee jlcpcb.com
Subscribe It's Free bit.ly/2WlyA8Y
Parts Required:
(Banggood.in)
1) Arduino Nano(2x) - bit.ly/2RdpIo4
2) RF Nano (optional) (2x) - bit.ly/2E1o0NB
2) NRF24L01+ RF Module (2x) - bit.ly/2YOEP7j
3)L298N Motor Driver - bit.ly/2LTqEMh
4) ADXL335 Module - bit.ly/342akwB
5) TT Gear Motor (4x) - bit.ly/2XZFLZv
6) Rubber Wheels (4x) - bit.ly/2XIaDOQ
7) Male and Female Header Pin - bit.ly/356LRrl
8) 18650 li-ion battery (2x) - (from old laptop battery)
9) 18650 battery holder - bit.ly/2sulLwu
10) Screw Terminal - bit.ly/2YxdB5O
11) Custom PCB - bit.ly/3576vHw
12) 5mm Acrylic Sheet - (Offline Store)
----------------------------------------------------
(If you want to buy the same PCB which one i used in this video.
Just download the Gerber file and upload it to JLCPCB.com to order the PCB)
Gerber File - bit.ly/32Tcly8
Code - bit.ly/3hw9uPE
Circuit Diagram - bit.ly/3f0J7zP
----------------------------------------------------
More Arduino Car Related Projects:
More Arduino robot projects:
1) Arduino Human Following Robot - • How To Make Arduino Hu...
2) Arduino All-in-one Robot - • Arduino All-in-One Robot
3) Arduino Metal Detector Robot - • How To Make DIY Arduin...
4) Arduino Obstacle Avoidance Robot - • How To Make A DIY Ardu...
5) Arduino Voice Control Robot - • How To Make DIY Arduin...
6) Arduino Gesture Control Robot - • How To Make DIY Arduin...
Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE
-------------------------------------------------------
Here my social sites:
Facebook: / surajit.majumder.165
Instructables: www.instructables.com/member/...
twitter: / diybuilder1
Instagram: / diy.builder
------------------------------------------------------
🎧 Background Music
Song: BraveLion - Bum Ba Ye (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • BraveLion - Bum Ba Ye ...
-----------------------------------------------------
#ArduinoGestureRobot #ArduinoProjects #ArduinoRobot

КОМЕНТАРІ: 1 000
@learnwithyashen
@learnwithyashen 2 роки тому
The best gesture control car i have ever seen
@DipanshuRao416
@DipanshuRao416 Рік тому
POV: You are seeing this video because your teacher gave you homework that you have to make a robot or you have to make a robot for exhibition
@sussybaka6901
@sussybaka6901 6 місяців тому
Bikul sahi yadav ji
@rameshmani9472
@rameshmani9472 6 місяців тому
You are future predictor
@bilqiskabir4715
@bilqiskabir4715 6 місяців тому
Very true
@hanumanthat2235
@hanumanthat2235 5 місяців тому
... EGGZACTLY.... Y'KNOW you gonna be a fortune teller in the future Salute ✌️💀
@kshitijpandey5333
@kshitijpandey5333 5 місяців тому
Bahut sahi
@HOID365
@HOID365 4 роки тому
I wish this guy uploaded this video when I was ridiculously searching for science project for science fare in school days...
@raghavandrasingh7471
@raghavandrasingh7471 4 роки тому
I am biggest fan of you please give me this apko science ki kasam
@12debaduttadas23
@12debaduttadas23 3 роки тому
I am looking for science project but it's out of my awkad .. kuki abba nahi manenge
@muhammadridho7680
@muhammadridho7680 3 роки тому
I try this but this hard af, especially in soldering
@courageouscuber9278
@courageouscuber9278 3 роки тому
@@muhammadridho7680 What did you find hard about the soldering? That actually should've been one of the easiest parts.
@ghostmbhoot
@ghostmbhoot 3 роки тому
@@12debaduttadas23 Oh bhai op💥
@ayaanpatel9667
@ayaanpatel9667 4 роки тому
very nice project bro, keep it up man
@jayeshchavan3103
@jayeshchavan3103 4 роки тому
Can you make separate video for the countering work and please bro speak bro speak I didn't understand that you have done in laptop or computer OK bro and please tell three uses of around robot please bro and your videos are amazing
@matheuscardoso1
@matheuscardoso1 4 роки тому
Congrats for that project. Really interesting
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks
@sandipdeb9253
@sandipdeb9253 4 роки тому
@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
@chouaibdownlaod5968
@chouaibdownlaod5968 4 роки тому
@@sandipdeb9253 I am also . My transmitter not working , How did you solve the problem !???
@joshuaolaiya
@joshuaolaiya 2 роки тому
@@DIYBuilder Mine is not working!!! Some told me it's from your code.. Why? Tell me the solution to this problem pls🙏🙏🙏🙏
@pavankumarc707
@pavankumarc707 2 роки тому
@@joshuaolaiya have you got any solution pls tell even I am also facing the same problem
@renaldy6538
@renaldy6538 2 роки тому
Thats so cool man,keep it up
@javiers.8274
@javiers.8274 2 роки тому
So nice man! Very cool Project, I gotta build one :D
@guptarahulsunil2149
@guptarahulsunil2149 4 роки тому
Amazing bro U have done great job thanks for making this video
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks bro
@vickycruise7092
@vickycruise7092 4 роки тому
Wow amazing 😍👏👏👏
@_reddit-time_
@_reddit-time_ 8 місяців тому
When making the reciever and transmitter do i have to connect cables at the bottom or not?
@nxp1759
@nxp1759 Рік тому
Hi, Can I have the outline design of the circuit boards as an image since I am going to build the boards myself and I don't have the software that opens the content in the Gerber zip file. Thanks
@moxxy6359
@moxxy6359 2 роки тому
please make a video for designing that JLCPCB board
@henrykzajac8001
@henrykzajac8001 4 роки тому
I'm impressed with quality of your video and project. Really great work. I noticed also you've made only 1 state at one time available. I guess making it ride and turn at the same time would be nice improvement :)
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks
@_shubhamjadhav
@_shubhamjadhav 4 роки тому
@@DIYBuilder can u provide me report or PDF of this robotic vehicle on my personal gmail Shubhamsj077@gmail.com
@sandipdeb9253
@sandipdeb9253 4 роки тому
@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
@blackoutarmy993
@blackoutarmy993 4 роки тому
@@sandipdeb9253 ur battery must be low
@karanpatel8060
@karanpatel8060 2 роки тому
Could you please let me know the software you had used to simulate the code before actually creating the working model
@techwith_Aamir
@techwith_Aamir 8 місяців тому
What are the small components you used to make the PCB
@DanielRibeiro-io4fr
@DanielRibeiro-io4fr 3 роки тому
I will show this project to my science exhibition. Thank you so much :) :)
@feloi3033
@feloi3033 Рік тому
did it worked bro?
@astheticVibe
@astheticVibe Рік тому
have you done your project
@senthilprabhu.s480
@senthilprabhu.s480 2 місяці тому
is it worked
@imaansarwar8845
@imaansarwar8845 4 роки тому
This is a legit great project. I am looking forward for more to come. Hope I’ll be working with one of it for my semester project. ❄️🙌🏻
@karanpatel8060
@karanpatel8060 2 роки тому
Could you please let me know the software you had used to simulate the code before actually creating the working model
@shahinhajamar6538
@shahinhajamar6538 2 роки тому
In the end it worked
@subarnadevkota4334
@subarnadevkota4334 Рік тому
@@shahinhajamar6538 it worked for you bro?
@feloi3033
@feloi3033 Рік тому
@@shahinhajamar6538 did it worked?
@mahimnabhuse9548
@mahimnabhuse9548 6 місяців тому
​@@karanpatel8060bro i have used components that are in circuit diagram. But it is not responding
@saurabhdhaka9658
@saurabhdhaka9658 Рік тому
where we can buy the white board you have used in the video to setup arduino nano can you pls provide the link
@paktoysreview8377
@paktoysreview8377 2 роки тому
i really like your work
@adityasoni2030
@adityasoni2030 Рік тому
Very nice car sir I liked it soooo much. Appreciate it
@adhithm487
@adhithm487 4 роки тому
Nice one bro. Its very cool to watch all the coustomization that you are bringing in to your robot during the past year. Your projects are always up to date 🙂. Best wishes
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks bro :)
@sandipdeb9253
@sandipdeb9253 4 роки тому
@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
@joshuaolaiya
@joshuaolaiya 2 роки тому
@@DIYBuilder My transmitter is not controlling my receiver. If I turn ON the robot, all the wheel will keep on rotating until I switch it off then it stop but I cant control it gesturely. Please whats the problem 🙏🙏🙏🙏🙏
@kaushikdhar5242
@kaushikdhar5242 2 роки тому
@@joshuaolaiya Also I am facing the same problem
@rendyaprizal2720
@rendyaprizal2720 Рік тому
@@joshuaolaiya same, how you can solve that problem?
@liliamarcher3840
@liliamarcher3840 4 роки тому
Thanks a lot, ill make this project.
@charmilshah7927
@charmilshah7927 2 роки тому
Did you make it? Did it work?
@tgtech2821
@tgtech2821 4 роки тому
Congrats for 100k sub's ❤
@DIYBuilder
@DIYBuilder 4 роки тому
Thank you so much 😀
@NTNLabs
@NTNLabs 4 роки тому
Love it!
@akshitsharma2737
@akshitsharma2737 4 роки тому
Awesome Bro! Love YOU
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks bro
@akashprajapati_in
@akashprajapati_in 4 роки тому
Mind blowing creativity, I like it , Would you make more this type model . And please give me instructions of this all part of Car
@mdsirjul8017
@mdsirjul8017 4 роки тому
Thanks bother 😘😍😇🤔
@Kirti7236
@Kirti7236 3 роки тому
What a great project Sir....
@user-jf3ge6fc9u
@user-jf3ge6fc9u 11 місяців тому
Super project bro this is very awesome i like this vedio
@tensoescalar1
@tensoescalar1 4 роки тому
This is a very impressive video, thank you very much, ratings from México
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks man
@sandipdeb9253
@sandipdeb9253 4 роки тому
@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
@coolwizard1582
@coolwizard1582 3 роки тому
@@DIYBuilder in both transmitter and reciever we have to upload same programing ??pls reply and pcb is important or not pls reply???😥😥
@DIYBuilder
@DIYBuilder 3 роки тому
@@coolwizard1582 no bro there are two different code available . pcb isn't important
@jangidtechfacts2897
@jangidtechfacts2897 2 роки тому
@DIY builder sir mera modal kaam nhi kar raha pls help
@saloneekavatkar7224
@saloneekavatkar7224 3 роки тому
Hello can you code for 6 wheels , rocker bogie mechanism?
@Papiii_benz
@Papiii_benz 3 роки тому
Great video. Thank you so much for sharing and helping ! Not many do and I appreciate you
@feloi3033
@feloi3033 Рік тому
Did you tried to make it?
@sonifasharmin3609
@sonifasharmin3609 3 роки тому
I love the lighting sooooo much!!
@DIYBuilder
@DIYBuilder 3 роки тому
Thanks
@prafulladhage9106
@prafulladhage9106 3 роки тому
I want to know that dose this project need library for motor driver
@swarnavamazumder8830
@swarnavamazumder8830 2 роки тому
yes
@ii5086
@ii5086 4 роки тому
Bhai great job
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks bhai
@sheetalmagundnawar1195
@sheetalmagundnawar1195 3 роки тому
Great thanks bro for your help I used for science exhibition
@DIYBuilder
@DIYBuilder 3 роки тому
Great 👍
@saahithii
@saahithii 2 роки тому
so you did it fr?
@indianleolion
@indianleolion Рік тому
Excellent bro 🤝🤝🤝🤝🤝 my full support keep going
@DIYBuilder
@DIYBuilder Рік тому
Thanks bro
@jayeshchavan3103
@jayeshchavan3103 4 роки тому
Bro tell me the uses of around robot you didn't get reply *please reply*
@ilkerylmaz
@ilkerylmaz 2 роки тому
How can i find components of the custom pcb?
@beenavaishy2516
@beenavaishy2516 4 роки тому
Bro you are making awesome projects ,be calm your subscribers will increase soon...
@DIYBuilder
@DIYBuilder 4 роки тому
Thank you so much 😀
@thecookingstar7490
@thecookingstar7490 3 роки тому
What are you adding with the jlcbp,we will get it together we buy it from outside or we have to buy individually and if it is then please tell me the names of the components
@sajitharnambiarchandroth6438
@sajitharnambiarchandroth6438 4 роки тому
First🥰🥰
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks for watching bro
@prakashpunj421shukla4
@prakashpunj421shukla4 Рік тому
when a r&d person watch he was like where is schematic and where are the logics,, for him it was only fascination not a project.
@deepas4630
@deepas4630 5 місяців тому
I am using breadboard instead of PCB. Used the circuit connection as mentioned in the attachment. But as mentioned, receiver is able to power up, as well as able to upload the code. But Transmitter is not working.... do you have the updated code / circuit connection for the same?
@himanshukhatri5710
@himanshukhatri5710 3 роки тому
Love you.....bro........ I see your videos only......
@DIYBuilder
@DIYBuilder 3 роки тому
Thank you so much 😀
@electronic7979
@electronic7979 4 роки тому
Very good
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks man
@talktik1260
@talktik1260 4 роки тому
Awesome
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks
@princekumar8306
@princekumar8306 3 роки тому
Bro hand control car receiver and transmitter Ek dusre ko Kitne dur Tak connect Karenge
@MrDex-lq5mz
@MrDex-lq5mz 9 місяців тому
Thanks bro👍👍👍👍
@himanshuchoudhary8347
@himanshuchoudhary8347 4 роки тому
What if I want the this gesture system in a drone, can you make a video on that???
@himanshuchoudhary8347
@himanshuchoudhary8347 3 роки тому
@Ekveer Sahoo The orientation of the object will definitely fail.
@swarnavamazumder8830
@swarnavamazumder8830 2 роки тому
@Ekveer Sahoo you are absolutely right
@himanshuchoudhary8347
@himanshuchoudhary8347 2 роки тому
@Ekveer Sahoo Exactly, that's why i ask him, how to do 'that'...
@lacieray1969
@lacieray1969 4 роки тому
id love to make this one but lack of equipments
@robolearn9122
@robolearn9122 4 роки тому
If you want to make a cheap one wait for sometime I will make it. Stay tuned
@ahmedaboudiwan5415
@ahmedaboudiwan5415 2 роки тому
Is it possible to add an ultrasonic sensor and connected to the current circuit?
@jeorgeespinosa2974
@jeorgeespinosa2974 4 роки тому
Hello. Sorry im still new to this. What is that soldering tool you used to connect the wires in the gear? Liked and subscribed. Nice videos thanks
@user-um9rn2id1q
@user-um9rn2id1q Рік тому
It's a soldering iron, if you still need it.
@franciscovictorio3602
@franciscovictorio3602 4 роки тому
I need one those
@kevinmorilabajos4165
@kevinmorilabajos4165 4 роки тому
Can u Make A Arduino 2 Joysticks Control Car, 1 joystick to control the wheels and the other to control a pan / tilt servo chassis
@webslinger2011
@webslinger2011 4 роки тому
Just for the robot car : ukposts.info/have/v-deo/pJh4jHeBoW6jq6s.html you'd have to modify to add the servos.
@Anuj39811
@Anuj39811 2 роки тому
can you please tell what you use for the base of receiver and transmitter
@venujanethsilu9917
@venujanethsilu9917 Місяць тому
need a quick answer pls!!! Why did you use 1 arudino nano + rf nano instead of 2 arduino nano boards (as you mentioned in the description) i hope a quick answer pls!! :)
@shammanrahin6889
@shammanrahin6889 4 роки тому
RF Nano (optional) what do you mean by optional? can i use arduino nano for transmitter too?
@surajitmajumdar7620
@surajitmajumdar7620 4 роки тому
Yes you can
@confusednsutian7100
@confusednsutian7100 4 роки тому
RF nano is just an Arduino nano with a Bluetooth module
@confusednsutian7100
@confusednsutian7100 4 роки тому
You will need an Arduino and a seperate bluetooth module
@shadatulhusni2841
@shadatulhusni2841 4 роки тому
@@confusednsutian7100 how about program code.. erroe nrf24 eror
@chandrakumarmaurya373
@chandrakumarmaurya373 4 роки тому
How to buy RF nano?is there any other name of it?
@confusednsutian7100
@confusednsutian7100 4 роки тому
U don't need one
@confusednsutian7100
@confusednsutian7100 4 роки тому
Just buy an ard nano and a Bluetooth module that's it
@saksham9143
@saksham9143 4 роки тому
@@confusednsutian7100 not a bluetooth module, its a nrf24l01 Both are not compatible with each other
@veerendragowd9841
@veerendragowd9841 4 роки тому
@@confusednsutian7100 i dont want to do it that way
@sujaysarkar1864
@sujaysarkar1864 4 роки тому
Keep going brother ❤
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks bhai
@Bug-wc5gc
@Bug-wc5gc 4 роки тому
@@DIYBuilder bhai jo bol raha hai code upload nhi ho raha unka reply do
@sandipdeb9253
@sandipdeb9253 4 роки тому
@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
@eswar9255
@eswar9255 4 роки тому
Good edit
@huynguyenvan7741
@huynguyenvan7741 4 роки тому
wow
@kevinmorilabajos4165
@kevinmorilabajos4165 4 роки тому
it's very cool
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks
@sajanspillai5996
@sajanspillai5996 4 роки тому
Amazing project
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks
@user-zb9nv5qg5b
@user-zb9nv5qg5b 5 місяців тому
mashala veer bohot psand aya
@richo5472
@richo5472 4 роки тому
how to upload RF NANO? I tried many times can not
@HyperPhoenix6771
@HyperPhoenix6771 4 роки тому
What is the name of the part you put in 3:48 ? Urgent!
@blackoutarmy993
@blackoutarmy993 4 роки тому
switch,male berg strips
@KevinSolem
@KevinSolem 4 роки тому
good work and cool music
@jh-hh3xu
@jh-hh3xu 4 роки тому
Make a zepwrate video of hand circuit .... And tell what are the things u have used in them i didnt understand . Bro plz make a seperate video of a circuit which u have in your hand
@HarshYadav-lq9de
@HarshYadav-lq9de 4 роки тому
CAN YOU JOIN
@ii5086
@ii5086 4 роки тому
Make mini PC
@DIYBuilder
@DIYBuilder 4 роки тому
ok bro
@beastxofficial4959
@beastxofficial4959 10 місяців тому
Get a raspberry pi
@rohittejwani2964
@rohittejwani2964 9 місяців тому
Great project sir,but there Is one problem I am facing, As the adxl335 occupies 5v out of 9v or even 11v,the rf nano isn't getting enough power.Please help with that
@DIYBuilder
@DIYBuilder 9 місяців тому
which power source r u using?
@kaushikdhar5242
@kaushikdhar5242 2 роки тому
Can I use single row male and female header pin in space of double row male and female header pin?
@himanshu1260
@himanshu1260 4 роки тому
Please upload code🤩🤩🤩🤩🤩🤩🥳🥳🥳🥳🥳🤣
@mickeygamingpro2606
@mickeygamingpro2606 Рік тому
Yes
@philominadsouza9612
@philominadsouza9612 4 роки тому
Bothad
@johncaicedo1151
@johncaicedo1151 4 роки тому
Can you use the RF-nano in the receiver as well, It is the same setup but just that one insted right?
@ucnhuanhuynh5190
@ucnhuanhuynh5190 4 роки тому
Agree
@obitogamer940
@obitogamer940 4 роки тому
excellent job my friend
@HarshYadav-lq9de
@HarshYadav-lq9de 4 роки тому
I HAVE JOB FOR YOU
@lily-uq5jc
@lily-uq5jc Рік тому
Yeah even I have a job for you. To clean my house
@Piyali240
@Piyali240 Рік тому
@@lily-uq5jc mere pas koi job too nahi hai tumhare lie..lekin ek advice hai..khud ka ghar khud hi clean kro sale
@lily-uq5jc
@lily-uq5jc Рік тому
@@Piyali240 huh? I don't understand
@notme8620
@notme8620 4 роки тому
Bro Create something Unique, something that no was has created.That,s the kind of project people want. This projects have already been created
@DIYBuilder
@DIYBuilder 4 роки тому
Unique projects are coming soon bro
@alfinjoju7
@alfinjoju7 2 роки тому
Hi I am first in this I have confusion about PCB board after buying pcb board you are some components to it not Arduino and all, some pins and switch like thing and all, what all are the names of that
@shreyadahale9117
@shreyadahale9117 4 роки тому
I want to ask you this also that the RF Nano is in US Dollars then how to buy it?
@irwanardiansyah6167
@irwanardiansyah6167 4 роки тому
send code please!
@bhavaniviswanadh3363
@bhavaniviswanadh3363 4 роки тому
In description thank me later
@irwanardiansyah6167
@irwanardiansyah6167 4 роки тому
@@bhavaniviswanadh3363 So now its available.. thx for remind me😄
@creativeallaround8942
@creativeallaround8942 4 роки тому
Who like this will like it⬇️
@m4imoo
@m4imoo 6 місяців тому
hi, for the pcb can i use a standard one without any labelling on it?
@cezaryfilipkowski5501
@cezaryfilipkowski5501 2 роки тому
Nice project. But I need your help where can I buy the same PCB like yours used in this video.
@techinspiration3444
@techinspiration3444 8 місяців тому
can i use seperate arduino nano and nrf24l01 for transmitter as well? if yes then should i need to change code? and can i use mpu050 gyro? if yes then what will be the connection and change in code?
@IndianIconicGamerYTG
@IndianIconicGamerYTG 7 місяців тому
bro yeh acrylic sheets pe whole khud krne pdenge?
@zionchristopher5985
@zionchristopher5985 Рік тому
Bro pls upload the required libraries for those 2 programms
@rajdurvasula2238
@rajdurvasula2238 2 роки тому
Nice project. Wonder what kind of mount boards you use. Where can I buy such boards. Thank you
@hansontech
@hansontech Рік тому
pcb
@animeshmandal1462
@animeshmandal1462 Рік тому
ADXL335 module ki badle ma ADXL345 use kar sakta ha ka? Or circuit digram kasa hoga batado yr
@ProjeXonic
@ProjeXonic 3 роки тому
Amazing😍🤩🤩🤩🤩 #ProjeXonic
@TonyStark-wf2qm
@TonyStark-wf2qm 3 роки тому
Can I use ADXL345 Accelerometer Module instead of ADXL335 Accelerometer Module?
@davormaricic
@davormaricic Рік тому
hi, great project, my son is just starting to work on it. Do you have any schematics for this 14x9cm acrylic plate you`ve made (to have a holes on a right places? Thank you
@DIYBuilder
@DIYBuilder Рік тому
No, sorry
@davormaricic
@davormaricic Рік тому
@@DIYBuilder Thx
@subarnadevkota4334
@subarnadevkota4334 Рік тому
i can't get it how your NRF module is working for the receiver build wire are not connected to it from the upper part is there anything that i missed?
@jemitsavani8638
@jemitsavani8638 9 місяців тому
Can we get this project readymate ?
@juanalmaraz4957
@juanalmaraz4957 2 роки тому
La salida de de 3.3vc de arduino nano no tiene suficiente amperaje hay que poner un adaptador (reducir el voltaje) y conectarlo a 5vc
@MichaelAbsher
@MichaelAbsher Рік тому
Hey DIY builder. I love your video's and this one the same but I have a question. I built it but the NRFL01 modules are not connecting to each other and it does not work. Any Ideas why they are not connecting?
@MichaelAbsher
@MichaelAbsher Рік тому
Does the code change if I use a Nano and a nrf24l01 module for the transmitter?
@rpian1999
@rpian1999 Рік тому
Try using NRF24l01 adapter with that NRF24L01 module
@juanberrio3552
@juanberrio3552 Рік тому
Hi, I got a problem with the project, when the car supposes to go straight there are 2 wheels that run in the other direction, do you know what may be the problem? thank you
@umeshwarans.a6435
@umeshwarans.a6435 2 роки тому
how to connect RF-Nano with adxl335 accelerometer as a transmitter. Can you tell me the block diagram
@ephraimrpl1039
@ephraimrpl1039 11 місяців тому
Hi That's A Good project, but can you give me tutorial how to change the adxl335 with mpu-6050. Please answer this(school project)
@photography_youssef
@photography_youssef 4 роки тому
Thanks you so much brother
@TechUndefined
@TechUndefined 4 роки тому
Kadak bhai
@DIYBuilder
@DIYBuilder 4 роки тому
Thanks Bhai
@TechUndefined
@TechUndefined 4 роки тому
@@DIYBuilder bro why don't you make a what's app group ??
Arduino All-in-One Robot
8:29
DIY Builder
Переглядів 1,2 млн
How to Make a Gesture Control Robot at Home
10:09
Tapendra Mandal
Переглядів 4,2 млн
🔥 Україна виходить у ФІНАЛ ЄВРОБАЧЕННЯ-2024! Реакція alyona alyona та Jerry Heil #eurovision2024
00:10
Євробачення Україна | Eurovision Ukraine official
Переглядів 324 тис.
Піхотинець - про рутину на фронті
00:46
Суспільне Новини
Переглядів 1,2 млн
How To Make DIY Arduino Voice Controlled Car At Home
7:28
DIY Builder
Переглядів 846 тис.
Make a TINY Arduino Drone with FPV Camera - Will It Fly?
20:26
Max Imagination
Переглядів 307 тис.
How to Make A Simple And Easy Arduino Robot For Science Project
7:42
DIY Builder
Переглядів 1,1 млн
$15 Drone Build within 24 Hour - Challenge
12:01
DD ElectroTech
Переглядів 3,4 млн
How To Make DIY Arduino Gesture Control Robot At Home Using Radio Module
9:52
DIY All Direction Gesture Control Car Using ESP NOW
6:39
Pro Know
Переглядів 28 тис.
Hand Gesture Controlled Car Using Arduino🤜🚗
11:10
hash include electronics
Переглядів 75 тис.
How To Make DIY Arduino Air Gesture Control Robot
6:19
DIY Builder
Переглядів 81 тис.
How To Make A DIY Arduino Joystick Control Car At Home
6:34
DIY Builder
Переглядів 804 тис.
Дуже смачні хот доги😋
0:32
Igor Shpigunov
Переглядів 420 тис.
💖Maryana💖
0:17
TikTok Compilation
Переглядів 2 млн
河东狮吼
0:13
曹操大哥
Переглядів 13 млн
Press tutorial😮‍💨✅
0:26
Jamshid Jamshid
Переглядів 14 млн