Love how you show this systematically

Wonderful tutorial and stunning, realistic results!

Excellent job with your resin. And see I agree you do make it look so easy. Thank you for sharing 😊

Beautiful work! You make it look so easy.

This video is great for starters. Thank you so much 🙏🏼

Wear a respirator even of there is no smell the chemicals are bad in the long run for your lungs.

Thank you soo much, I tried this method but still had issues using using the West Systems epoxy that I usually use, so I tried a different epoxy I pulled out some UVPOXY from Ecopoxy and it was night and day, my very first try looks amazing, enough so that I'm going to make an ocean table after I've done some more practice, again learning from a PRO is never a bad option

This is a really good tutorial and very well explained, thank you so much!

Thanks for the tutorial! I’m curious if you prepped the cutting board? And if so, how?

Thanks this was amazing, I am going to try it out today and if I get good I will be marking some large tables and possibly counter tops. 😁

Love it...I never did it like that...so beautiful and easy

Awesome tutorial thank you so much for sharing, loved every minute of your video perfect for a newbie to resin!

Love this effect.

These are very beautiful. I showed them to a friend and she wants one. I have just finished by first river table and have experience making canoes with epoxy. I want to try making one of these. It looks like the cutting boards are finished. Do you have to sand the areas where the waves go? Or will the epoxy stick to the finish without sanding? Thanks for the video!

Man your work is awesome. Congrats 👏 please keep on making more videos.

Amazing, how do you remove the hardened drops of resin under the frame?

This is amazing! I was going to book into a workshop to do this until I saw it was $140 australian. You have just saved me at least half of that. Thank you so much!😃🇦🇺

Love your work! Could you tell me what brand and product you are using for the white waves ?

Chris, what do you do to the bottom to keep resin off? Do you take it?

Beautiful! I would imagine those would sell like crazy at Christmas time. How much would you sell those for? Cost to make? Great video!!

Thank you for making this look easy enough for us to try! Great tutorial! I’m definitely a subscriber now!!

Can you please tell me how you prepare the back side of the board? Thank you. They are beautiful!

Thank you so much for this amazing video RIver!!!

Amazing. Thanks for posting!!

Thank you for sharing man.

Great video. Looks good! Thanks for making the video.

Really nice tutorial thank you!

I’ve just found out about resin art and I think this is a good start for me. Very nice tutorial u can have 1 extra subscriber from me and look forward to seeing more of these

wow!!! excellent work thanks 😊

Is there any special prep to the boards before pouring resin?

Fantastic job, very creative.

Is there anything on the board before you pour the epoxy on?

Absolutely fantastic 👏 👌 Sir.

What did u use for mixing the white? resin hardener and what kind of white colour? , it get little white pixel all day long and no waves

Great video, I really want to try doing that, it looks so beautiful. Thank you for showing me how to do it step by step.

What did you seal the boards with before you did this? Do you have to sand the finish before you make the wave also? Ty

Did you tape off the back? I use 2 different blues for depth.

Wow!! Amazing. Thank you.

Great video, how much blue was in your second coat?

A Dutch pour with epoxy. Cool! Do you have to use a torch or would a heat gun work?

And beautiful work!!

Do you make glow in the dark pigment. I have an outdoor project in mind (mailbox) and I wanted to do glow in dark for numbers.

If i don't have a torch and only used the hair dryer which blows hot air would it be enough cause I've been facing this not cell looking waves problem cause i used to blow it cold

Can you use a heat gun in replacement of the torch?

How do you make it flat after all that resin on top? Do you leave it uneven or?

Great work. Plus Good Job explaining. However did you sand before adding the 2nd. Coat. I don't think the first coat had time to dry. I was just wondering before i try this project

Hey great job! Silly question, how many Watts is your hair dryer?

This is amazing!!😲 Did you prep the cutting board in anyway before adding the epoxy? Or did you just use it as is?

This was fascinating to watch! Love the boards, they turned out great. You have a new friend.

Hey Man! Super Cool Effect! What material is the plastic sheet you are using at minute 17 ? I'm trying to find something similar here in Italy... Thanks

Great can you use a heat gun instead of a blow torch? Love this art wood work. 😉

You did an amazing job! And I really appreciated that you did step by step for us and didn't leave any thing out thank you so much for that!! I had one question for you. The wood your using is it pre-treated with anything?

I have mica pearl white , would that do for the waves?

did you scuff up the boards to make the epoxy stick better

By the way do you use the same resin for the flood pour and for the waves? Coz i want to try the resin but I was told that casting resin is meant to sink and so table top shld be used for waves. Id like to know if the resin you use can be for both casting since river tables use thick volume anyways and I see you do the waves too.

Awesome, thanks for sharing.

Are these for decoration or can they be used for food?

I didn't notice wether you use hardener or not. Is it all right if we do not use hardener in epoxy resin?

Moms love everything! Lol🤣. Looks great! 💙

Do you let the resin run down the sides of the board ?

Superb mate. Love it! 👌😎🇬🇧

Waaaaaaaaaaaaaaaa!!!! Genial!!!!!! Excelente idea para hacer artístico un objeto cotidiano. Excellent idea to make artistic a daily object. Tky for sharing.

Nice. What is underneath them as table cover

“I’m gonna give it to my mom anyway.” “Moms love everything” 😌

love the tutorial very good video im subbed

If i use more colour blue to be opaque wont it spoil the resin ?

What is the kind of white for the waves pls ? May u make it more clear ? Thanks

how long did this project take you?

If I don't have blow tourch,how to create that cells,with hairdryer can I do,or any other method

Have you ever considered using something to catch the run off resins and put them to use, such as in mounds or something?

Can i use heat from hair dryer to make cells ?

How much epoxy would I need for a 4x6 table 1/4 inch thick

I love your instruction, but I had to watch it several times(I'm new at this). Anyway I have two questions.. first I tried to use a bamboo cutting board and the resin did not stick!! Weird. Do you have to use a certain non coated board? Second how do you deal with all the drips on the edges???

Which products did u use? AMAZING

What about the back of the board doesnt it get messed with paint ?

So it doesnt need final sanding, wouldn't the ocean pour be higher than the board without sanding

Beautiful ❤️

This is so beautiful. Thanks for the tutorial.

Hey what type of pigment are you using?

What white do you use please? Thanks

How do you keep the resin from collecting or creeping around to the back surface of your cutting boards - and if it does, how do you remove it please ? I know nothing about this stuff and havenever done it but your work is fabulously talented ! 👏

Amazing!!

What about the beneath of yr work ,how to you avoid the resin messing the beneath

Wow pretty dang cool!!!

Could I use a heat gun instead of a torch?

Amazing!

Thank you for sharing, please what colors r u using exactly. Is it specifically for resin or what

Buen vídeo, enhorabuena.

Are those store bought boards or did you make them?

Where do you get the blanks cutting boards?

I need help! Lol. I did this to the T and I didn't get any cells at all and had to used way more color than suggested. I checked about 13 hours later and it's got a weird film on the top. I mixed as I should and have this problem for the 2nd time using it. Please help. You're video seems super easy but I have to be doing something wrong. Thank you for the information

Did u make the boards too

wish i could get the resin and ink in the uk

Oooh lovely! You could make some nice earrings with that runoff!

Great work

sir, you are an absolute genius. thank you so much for sharing🙌🏾🙌🏾

can you please tell me the addetives you are useing as i could pick it up from your comments thanks eddie

If i dont have a torch , and just leave it ,wont it do its own work and make cells ?

great skill boss

white is pure paint? or mixed with resin?