nice work! I'd definitely do this if I knew my wife wouldn't demolish the wheels again moments after I finished.

Amazing! I was looking at picking up some scuffed wheels from the junkyard, but I was hesitant since I wasn't sure how to handle refinishing them, but now I am more confident buying them. Thank you for the video!

As a Car Mechanic myself and one who did Tire-Jobs and more for a long time I need to make this recommendation: 1. Make your life much easier and get your tires to a Car Workshop so they can press down the Tire from your Rim... if so, you don't have to be that carefull to hit the Tire while sanding, also spraying the Rim afterwards is much easier and the Finish is much better since you can get deaper in the part where Tire and Rim hit each other. Afterwards you just have to fill the Tire with air again and normaly it just should pop up into old position ;) 2. After doing all this... also get to a Car Workshop or a Wheel company, to let your Wheels be balanced again... since you remove and also apply material to your Rims (Removing Aluminium and applying paint) they might be outbalance at least a slight amount. Especially on front wheels where your stearing is, you might find this out sooner or later. Also it's not this nice for the Rest of your car to have these vibrations cause your wheels are off balance. But without these, it's great job ;)

I cant believe iv only just discovered this channel recently the videos are exactly the stuff I love to watch I have an older 2003 Volvo v40 and I love to keep it looking good but I have to do all of this on a budget as my kids always have and will come first. This is a great channel that really explains things fantastically....definitely makes you wanna do it yourself.

Absolutley brilliant very well explained unlike others I’ve watched well done sir great job

I built a “lazy Suzanne “ out of a base off of an old junk swivel reclining chair. Flip it over so that the round base is facing up. I can easily rotate the wheel to evenly cover the entire wheel without making 50 laps around the wheel. I used to end up with some areas that the paint was a bit thin because i could not see some places.

Your work is incredible, this is what I call a top of the line curb rash repair, un like other uploaders who claim to fix curb rash and all they do is paint over the damage

Fantastic video. Very well explained. Will do mine soon!

Brilliant, thanks!

I just did this. I went another route. Got a set of metal filers. Filed it down to a smooth surface. And just used touch up paint. Came out pretty good and quick. Finding the color match is always trial and error

Great job guy ! I have a Chrysler crossfire convertible I’ll be doing this to. Waiting for a sanding kit for my impact drill. Thanks

It's a Volvo, so the owner will curb them all again by next week 🙂

Thank you so much for the time you take to share this excellent work with us Keep up the good work 💪😃

I did detailing for 15 years on high end cars and daily drivers that was enough for me glad im done!!!!!!!!!!!!!

You make it look easy!

Good work and a great tutorial.

that was just stunning bro what an amazing job done and great content bro

Awesome quality of work!!!

Really great video very informative thanks a lot 👍🏿

This is a fantastic video. You can use a small piece of hose to mask the tyre valve.

Great vid. Showed me everything in detail. Thank you

beautiful job

That was a very good job. The finish looked like factory and you can’t really tell if the wheel was ever touched up.

Great job as always

Thanks for your nice detailed explanation. 👍👍

Great video . Thanks 😊

Wonderful job, and great on you for sharing the playing card tip. Reusing a pack of cards is way cheaper and reduces waste than using masking tape. Respect fella 👍

Fantastic job looks great 👍

That is an excellent job! Great video!

You're the Chrisfix of our nation 😂 love it mate deffo gonna fix up my alloys in a few weeks with this video on repeat!!

Your the MAN....stay safe mate

Curious how you prevent overspray to the inside walls when spraying. Great channel

End result looks great!!

I have been looking for a video like this for Ages! I am f glad I found it.. Could you please add a few more HashTags in your video so other people can find it easily? You are a Legend mate!

Beautiful job

Nice work!!

Good to see a proper thorough repair being shown rather than various faddy quick fix methods.

A really lovely job! (If you use playing cards, always face them downwards to save spoiling the playing side 😊) happy days..

Well done lad, good video and enjoyable music.

Top job again mate

I take my wheels to the tire store to get them to break the bead, this greatly eases the entire process. Use red scotch brite pads to scuff up areas that does not need repairs . i use an orbital sander with 120 grit and that is all you need to repair the curb damages. Wet sand with 320 grit on a pad to remove any swirl marks. Use a large trash bag cut a hole and wrap the wheel, it takes a minute instead of using tape to mask around tires.

Good job, excellent 👍

Wow ...well done !!

Brilliant !!

nice job mate

As someone that does this for a living day day out it’s good instructions very knowledgeable. The only goof up is using primer. If you notice most rims have 0 primer it’s not needed and is just a layer that can cause problems. As someone who’s been in auto body for 17 years trust me I know it sounds wrong but feather put your damage and paint right on the metal.

Nice job! thaks for sharing.

Wow, you really know you're stuff, excellent !

Nice job, I would use etch primer for bare aluminium to aid the bonding.

Awesome job👍👍

That's great buddy I've enjoyed your video

@2:01 I love how even your cat was impressed. Cat: weow 🙀

When you are all done, we are all ready to get more Rim Rash.

Nice work.

Good job mate

Great demo and video, well explained! one question, did you remove clearcoat at the start and how did you remove it?

U did a Hella job sir

Good work. Could you demonstrate how a brushed effect wheel could be fixed?

Nice job! How do handle the inner 'barrel' of the wheel? Mine are full of brake dust, grime and grit.

Class upload subbed👍

awesome! I needed an excuse/reason to buy a grinder so the wife wouldn't get mad. thanks for the video!😊

Good work, what type gun and what size compressor do you run

Thank you so much for your great videos. Hello from California! QQ. How long did it take you to restore the rim? And is that a service you offer? Thanks again.

Great video. Should you not wet Sand with a high grit before applying lacquer though?

Great job! Would you recommend they’re rebalanced after this sort of work is carried out?

Nice job! How do you find OEM color code for the rims ?

Brilliant. 👍 😎 👍

Very nice. What tape do you use for tires? Nothing seems to stick!

Great video. Thanks for putting this together. What colour did you use? I also have a Volvo and want to give this a go. Thanks again.

you did a great job! How can you balance wheels, when you unevenly sanded it around, does it makes problems?

Excellent, will this be the same process for aluminum polished rims?

Subbed liked. Gr8 quality content. 1 question. Audi wheel colour. Which is the brightest that can be bought in the UK. I thought ford star dust silver was brightest ford did.👍

Very nice Job

Top job as always mate.

Great job!👍

Thanks.good job m8.

Thanks for the video. Two front wheels have the same curb damage, however may just take it into a Pro... Although I do have an angle grinder.... thanks for sharing. Would you recommend the wheels are re-balanced or its so minimal that this shouldn't be needed?

Wow! Nice. What does materials add up to? Discs, primer, paint and clear coat ….

Hi mate - great vid! Do u have links for your air compressor and spray gun? Cheers. Alex

After the primer needs to be fully cured to Sand? And the 600 grit to sand, we sanding dry rigth, and then degrease again the wheels?

How have they held up?

Outstanding tutorial cheers Brenton from Tangambalanga Victoria Australia😊😊😊😊🇦🇺🇦🇺🇦🇺🇦🇺

Very good work and a great result. By the way, it's KERB as in the pavement kerb not 'curb'which is a verb which means to moderate or lessen.

With the sanding, can you use a sander rather orbital, or does it have to spin

Amazing

does a wheel need balancing after this? or is the amount of material that is taken off not important?

Great video. If you had a few deep marks on the wheel that are purely cosmetic. Can you recommend a type of filler, if thats at all possible? Also, is it an etch primer that you used please?

wow amazing

Finally a video that explains everything and show you what to buy. I love you man gotta repair my Supra wheels this summer can’t wait !!! Where do i get the rotary tool itself!? I looked on Amazon but will it fit the kit you sale?

I hear ya!

You are a world treasure, sir. PRIMER question: regular, or filler type? I guess it depends on level of damage on face, but wanted your thoughts. My focus is the kerb rash, which the eye is naturally drawn to first. Cheers from Oregon, USA!

Where did you get the "factory" base coat color from?

Is this possible with using a dremel ?

Hi mate, your videos are brilliant. Do you deflate the tyres a little to sand or leave them as they are? Im gonna practice on my wifes car wheels but there doesnt look like much space between the tyre and the alloy to use the rotary sander.

nice one mate, I would have dressed the tyre for a full finished effect.. I just subscribed, cheers from down under.

What are you using for PPE? Gloves, respirator? I've picked up some 2K clear but have read some nasty things about the chemicals.

Looks lovely, with a good sidewall shine, those wheels would pop

I wonder, will this work for a chrome rim?

Good clip

Thanks for this! Is the speaker from Mansfield by any chance?