J'avvoue

@loicplestna moi aussi

Pretty sure not possible with that display.

You can get different displays to do different things by connecting their CLK and DIO pins to different pins on the Arduino, so for example you can connect one display's CLK and DIO to pins 2 and 3 on the Arduino, and another display's CLK and DIO to pins 4 and 5. Hope that helps!

Shoul I just use this? tm.clear();

@@redenmoradz803 i have tried it doesn't work.

Thanks! Also, you can post your question in the comments, I'd be happy to help!

Ryan Chan hi. I think over messenger would be easyer but what i want to do is: Control a tm1637 display with a potentiometer. Showing numbers from 0:00 to 9:99. Components arduino nano, potentiometer with on off function, cr2032 coin as power source, step up module and of course the display itself

@@jayc1983 That's a good question. I've made this function to make it easier to do that: void displayNumber(int num){ tm.display(3, num % 10); tm.display(2, num / 10 % 10); tm.display(1, num / 100 % 10); tm.display(0, num / 1000 % 10); } To make the TM1637 display a number, paste that function into your code and pass in the integer you want to display into the function. So for your project, I suggest mapping the value of the potentiometer and then passing that value into the displayNumber function like so: pastebin.com/Xi5T5H7B Thanks for bringing this up, I will pin that function in a comment so others can use it as well