I Degreased an Excavator with A $99 Ryobi Power Washer and it cost me 99 days of my life
Переглядів 900,752
День тому99 days if you count the video editing I guess...
Here's links to all the stuff I use in my videos!:
This is the Ryobi here, I do like this machine a lot and I'll be making more content with it, just on smaller jobs lol: www.homedepot.com/p/RYOBI-180...
Milwaukee FASTBACK UTIILY KNF 6IN1: amzn.to/3pbY9xv
Milwaukee 10-Bin Impact Resistant Polymer Packout Organizer: amzn.to/4246D89
Chem-X HEAVY DUTY SUPER CONCENTRATED TRUCK WASH + DEGREASER + APC: www.chem-x.com/products/heavy...
WIPE OUTS: HAND + TOOL WIPES: www.chem-x.com/products/wipe-...
iK e Foam Pro 12: www.chem-x.com/products/ik-e-...
Grit Guard Bucket Dolly - Blue: amzn.to/3VAfhci
The Grit Guard Insert with Washboard Combo Pack (Black/ Black): amzn.to/423qYuD
Cambro RFSCW18135 Clear Polycarbonate 18-qt Bucket: amzn.to/3HBAZ9R
DETAIL FACTORY TIRE SCRUB BRUSH: www.chem-x.com/collections/de...
Milwaukee 18V Li-Ion Cordless SAWZALL Reciprocating Saw w/ 5.0Ah Battery & Charger: amzn.to/3LxxnHq
EASY REACH WHEEL/RIM BRUSH: www.chem-x.com/collections/br...
SPOKE BRUSH: www.chem-x.com/collections/br...
DETAIL FACTORY BOAR'S HAIR DETAILING BRUSH - LARGE: www.chem-x.com/collections/de...
EASY REACH TANK BRUSH: www.chem-x.com/collections/br...
EASY REACH FIBERGLASS EXTENSION POLE 4'-8': www.chem-x.com/collections/br...
Milwaukee M18 Fuel 3-in-1 Backpack: amzn.to/3nweLQ0
Tornador Z-014 Blow Out Tool: amzn.to/3HCsmMo
1/4" Prevost Safety Air Plug Coupler ISI061203 1/2" FNPT High Quality Prevo S1: amzn.to/3pmhLLT
My Reelcraft Water/Air/110v Power Reels: www.chem-x.com/pages/reels-booms
Chief Steamer 155 (240 Volt): chiefsteamer.com/product/chie...
Chem-X INTERIOR: CLEANER + DETAILER: www.chem-x.com/products/inter...
Edgeless 245 Microfiber by The Rag Company:
www.chem-x.com/collections/mi...
Chem-X GLASS: MULTIPURPOSE GLASS + SURFACE CLEANER: www.chem-x.com/products/glass
DIAMOND MICROFIBER GLASS AND WINDOW TOWEL: www.chem-x.com/collections/mi...
MTM HYDRO PF22.2 PROFESSIONAL FOAM CANNON W/REPLACEMENT PADS: www.chem-x.com/products/mtm-h...
Chem-X SNAKE OIL TOUCHLESS SIO2 CERAMIC FOAM SEALANT: www.chem-x.com/collections/li...
Chem-X Tire+Trim:
www.chem-x.com/collections/li...
Chapters
0:00 Intro
2:18 Unboxing the Ryobi
5:29 Deep dive into the specs
13:32 Day 2: Heavy Duty degreasing
22:36 Day 3: Heavy Duty degreasing
35:21 Day 4: Heavy Duty degreasing
45:00 Day 5: Interior detail
57:59 Chem-X Snake Oil Sealant
59:18 The Big Reveal
@camarors8992 11 місяців тому
I'd never pay someone to detail the exterior of my excavators, but that cab interior, that I would pay for. That's going to make the operators day much better.
@dc6233 11 місяців тому
Exactly what I was thinking...
@EchoTangoSuitcase 11 місяців тому
I would if I were going to sell it, because then I'd want it clean enough to do some rattle-can touchup, and doing it myself is a poor use of time. But other than that, I agree with the sentiment.
@michaelcrossan9260 5 місяців тому
The ❤😮
@CL4WEASUX 3 місяці тому
deff not detail but for sure power washing
@Factsfun-kg4xc 29 днів тому
Maintained equipment is a silent brand ambassador. Imagine the impact when your excavators consistently arrive on-site looking sharp and in top condition. It speaks volumes about your professionalism and commitment to quality. Take it from a successful contractor I know: his company prioritizes a fresh coat of paint on all equipment, new or old. They also incentivize their workers to maintain top condition, and guess what? They consistently land the biggest jobs in the area. It's a win-win - a strong brand image attracts clients, and a happy, well-paid crew keeps the equipment running smoothly.
@Lisle45 11 місяців тому
How clean the cab gets just shows the level you are at. It just looks immaculate
@ChemX 11 місяців тому
Thanks much appreciated 😁👏❌💯
@joenmclaughlin744 6 місяців тому
Nice job dude
@patricksimoneau7647 11 місяців тому
Again and again I’ve been proven that ryobi makes incredible equipment for the price. It’s never contractor grade but again for the price.. amazing.
@brookekathryn1980 11 місяців тому
You are 100% correct! Though, to be fair, we should note that the majority of the work that professionals do is done by using the proper chemicals and agitation. The pressure washer just makes it that much easier! And it sure doesn't hurt to have an expensive tool like this. Ryobi that does a great job, as your sidekick!
@orppranator5230 10 місяців тому
If only all the consumer grade tools would stop lying about their numbers. 1400 psi instead of 1800.
@timderks5960 10 місяців тому
Incredible is not quite the right word. Acceptable would be a better one IMO. For a hundred bucks you can also get a name brand, like Kaercher. I've used a few of their tools, and they're powerful and work like all other brands, but they just lack the real quality of proper tools. For the price, for a home owner that doesn't use them much, they're fantastic. For somebody who takes tools even just a little bit seriously, it's not gonna work.
@brookekathryn1980 10 місяців тому
@@timderks5960 Well, I think the first thing to say here is technically Ryobi is a name brand! It's a division of tectronics industries or TTI who also makes Milwaukee and Rigid which just so happens to be licensed under the Ryobi name. Secondly, I have driven the Ryobi and I would say amazing is a great word for it! At my facilities we own a karcher, a Cub cadet and an ego mower, I will probably be selling my karcher and my Cub cadet for the Ryobi at those two facilities, because it's so surprisingly impressive.
@DaveofAllTrades75 8 місяців тому
@@orppranator5230 I think it actually is putting out 1800 psi I don’t know what was different about Bob’s set up but there’s other detailer UKposts channels that have also reviewed it and use the exact same pressure gauge on it and it hit between 17 and 1800 dead on the money with the pressure washer and oddly there’s came with four nozzles the four colored ones that you normally get and not the turbo nozzle so maybe there’s an updated version? I also have the same pressure washer that I use just for small jobs big things I use my 3200 psi 3 gallon per minute gas powered one but it’s kind a hard to use a gas powered one when you’re detailing a vehicle without risking burning up your pump when you stop to agitate dirt and have to shut it off every time lol but anyway I got 1750 psi from mine and very little change when switching from 0° all the way up to 45 but I have extremely high pressure alone right off my Spicket at 100 psi just on the hose bib so I’m kind of surprised Bob got only about 1200 because I know they put out more than that. And it also does meet or exceed the gallon per minute most other UKpostsrs got almost 1.4 gallons per minute out of it but they had a sealed bucket with just the nozzle going through a tiny hole so in Ryobi‘s defense I think with Bob spraying water into open bucket a lot is lost from overspray splashing out of it otherwise I’m pretty sure he would’ve got the 1.2 gallons per minute out of it also for 100 bucks it’s one of the best little pressure washers out there of course there’s better ones we all know there is but for the weekend warrior that just wants to detail your car or use it for something else it’s a nice little combat unit you can throw in your truck you can throw it in your car and take it anywhere and they just work.
@botje420 11 місяців тому
Pro tip from an old chef who used to do vent hoods. Take a small bucket for the grease and swipe the pallet blade on that. Saves in paper and the hard edge makes it easier to scrape.
@markkropf8295 11 місяців тому
I feel like the customer didn't realize the gravity of the work it took to get to this level of clean.
@vikingd33 29 днів тому
That's why he made the video to get that tip
@jesseplummer2865 11 місяців тому
Enjoyed every minute of this video!!! Bob is hilarious, wish we could get more videos. Man I’d love to have a steamer like that.
@ChemX 11 місяців тому
Lol thanks bud, looking to get onto a once per week schedule again this summer and fully blow off all the owner responsibilities that usually distract me lol
@urcousinfromboston9052 11 місяців тому
Team Chem-X are quite the innovators, Im expecting both prototype brushes for sale soon!! And of course, we all come for the Kona show!!! Have a good wknd guys!!
@ChemX 11 місяців тому
Thanks couz you too 😁❌💯
@Z71__ 11 місяців тому
Ive been with my ryobi for about 3 years now. Still pulling strong!
@martilomas3440 11 місяців тому
To be fair I only watch to see Kona 😉
@ChemX 11 місяців тому
I know where I stand here lol
@martilomas3440 11 місяців тому
😂
@calebbrown223 11 місяців тому
@@ChemX did you make the wand shorter on the ik foam pro
@p__jay Місяць тому
if that Kränzle had issue, just fix it, don't hate about it and make it look bad! i have one too and its a very good high quality pressure washer and they sell every part as a replacement...try to get anything for that Ryobi!
@_Julie_Bee 11 місяців тому
Well, Bob is an absolute gentleman! I told him I use to do these møtherfückers with brushes, soap and cold water from a hose and he decided not to flex and used this tiny Mattel power washer instead of his own gear! Now, he does still own all of the cleaners I could ever dream , and Friends with freaking genius tool hacks tho 😅 It was an awesome video, I could still smell the limonene melt the grease😊 the hour was well worth checking in your channel every few days for this 😂
@ChemX 11 місяців тому
Lol it was a fun concept for a video probably going to do a little more with this little machine and see what we can get done with it
@_Julie_Bee 11 місяців тому
@@ChemX yeah, like the drain in your shop after all this abuse 😂
@leojunior7589 11 місяців тому
I live in Brazil. I have a Yanmar sv08 mini excavator I spend 1 whole day to wash it. No matter how big or small it is, it takes a lot of work. I also put gloss wax on it. I always keep it spotlessly clean.
@ChemX 11 місяців тому
It’s good to keep ahead of it I’m sure that makes it a lot easier
@GEisele0606 11 місяців тому
Been using your products on all the cruisers I have been detailing and it works out great!
@ChemX 11 місяців тому
Makes my day to hear it thank you!
@MikeKow80 10 місяців тому
I've got the DeWalt electric one and I've been fairly pleased with it. Sure doesn't replace bigger units for bigger jobs like this, but it's so useful around the house. Works great for cleanign the BBQ, cars, tools. It's ok for like a small walk way but soon as you get into the driveways and larger spots really need to switch to big GPM machines or you'll be there forever!
@brucehowe3477 11 місяців тому
Glad the Ryobi got the job done. A bit small for what you are cleaning but I have one to clean my cars at home and it works great. Stick it on the shelf and forget about it till you need it again. Love your channel! Keep the dog in the videos.
@jlarosa22 10 місяців тому
Some of the best knob polishing I've ever witnessed!!
@neteaadrian1654 6 місяців тому
You make a great job and it was a lot of work. Thank you for the video. Wish you all the best
@G35Jeesh Місяць тому
That preasure washer I use for 4 years now for my cars never had a problem. I just like how compact it is. It gets the job done.
@pipsohio 11 місяців тому
I picked up one of these while I wait for my AR Blue 630TSS and honestly kinda love it. Super portable and enough power for washing a car well. Cant beat it for $99 i recommend everyone has one of these suckers.
@foglebr 10 місяців тому
Call the brush the BFB, Big F’n Brush! Or maybe BFHB, Big F’n Hand Brush. 😆 Based off your experience and other’s comments here I’m definitely putting the little Ryobi on my shopping list! The sawzall brush I think is the Recip Saw BB for Brush Blade!
@rileychalmers7733 11 місяців тому
I have a older model of that pressure washer, nothing has changed other then the hose it comes with and a foam cannon. Thing is amazing for general use at home.
@ChemX 11 місяців тому
Yeah I’m impressed with it honestly I’ll be doing more with it down the road
@BelLavoroAutoSpa 11 місяців тому
Great video Bob. Now you know the kinda of pressure most of us detailers are working with, though a passenger vehicle is much different from industrial excavation equipment! The sawzall brush was hilarious, but looked to be very useful! How many hours do you think it took to clean that beast? My 5 year old son kept looking over, he LOVES excavators, particularly CAT brand but he doesn't mind others. I see that Chief extractor attachment getting some love! Keep up the great work Bob & Chem-X team.
@ChemX 11 місяців тому
Lol thank you Martin. I’m not sure what hours I had into it, but I know the video timeline was 37 hours long when I loaded the raw footage lol
@tasmanmcmillan1777 11 місяців тому
That excavator is only a baby. That’d fit in the engine bay of the excavators I work on
@foulweatherworks7831 11 місяців тому
i bought one of these Ryobi things and I was really wary buying such a cheap took, I was tired of the loud gas engine going constantly on my dewalt and i've been thoroughly impressed with it after probably 100 hours of time on it
@jackdonkey22 10 місяців тому
I bought a ryobi chainsaw in spring 2020 and it's helped take down 3 dead ash trees, 2 mulberries, 4 dead pines, 1 dead cherry, and a 12" boxelder. Plus all the clean up, pretty great sae for $200.
@dperreno 25 днів тому
Love the power tool assists!
@connorgadbois99 10 місяців тому
Even with the cold water set up my job has , the 2 step process just works wonders and it’s impressive
@Napmonsterjax 10 місяців тому
i have the older version of that ryobi and it worked wonders doing little detailing gigs here and there on the side. granted i also bought a different hose with a pistol? water gun. it didnt have a 24" barrel lmao. came in handy.
@Tater_Lord 11 місяців тому
Honestly the little powerwasher was better than I thought it was I'd keep it around just for the foam cannon it seemed to work really well for it, also the chalky paint is caused by sun deteriorating the paint itself plus certain cleaning chemicals can strip the protective layer off of paint causing that chalkiness to develop in the first place
@ChemX 11 місяців тому
Yeah I’m gonna hold onto it and see what else it can get done. I think your right about the paint
@user-is6du8hh1l 4 місяці тому
Interior looks new, he sure does awesome work.
@turbocivicsi1383 11 місяців тому
You gotta make more vids man you are awesome plus your products look amazing I've been heavily thinking about buying your starter pack and a foaming ik pump for the degreeser that stuff is insane and the mshine and snake oil on a crane 🤯 stuff is magic dude keep up the work 💯
@tubetubeunit 11 місяців тому
Ive done this job 7 years, car trucks boat tractor semi name it. I know the work and patience it require! And that my friend is a great job!👌
@programalateshow1750 11 місяців тому
My hybrid dude , tom petty / Dwight Yoakum cranking out another great video. You know you got a good channel going when I’m spending over an hour to watch a piece of roached equipment get cleaned , and look forward to occasional shots of the dog throughout the process.
@ChemX 11 місяців тому
Lol thanks for watching the whole thing this was practically a movie😂
@programalateshow1750 11 місяців тому
Can’t imagine how long it actually took to make the video from unboxing , detailing , completion , editing etc. nice job. Keep em comin
@CeramicCoatingSpecialist 11 місяців тому
I use the same Ryobi on residential vehicles but have a bigger power washer for the big Kenworth and RV type jobs.
@lylestavast7652 11 місяців тому
Nice work guy - the Ryobi got a good workout, some home/hobby sort of use might do pretty well with it.
@robertv4442 15 днів тому
Nice job on the clean, but I also would have liked to see clean grease be re-applied to through the fittings.
@Suds649 24 дні тому
I used to work at a cat dealership and we used an alkaloid based degreaser that came in a 55gallon drum. We had a 3 gallon sprayer that used shop air to pressurize it. The soap would remove the oxidized layer of paint and break down the grease. The only problem was that you could only leave it on the machine for about 10 to 15 minutes or it would etch the paint and leave streaks on the paint and even the glass. There is a learning curve to cleaning. As far as the cab goes you would be surprised how clean you can get it with a drywall sponge and a pail of water and dawn dish soap. . I used a shop rag and brakleen to clean the layers of body oils from the joysticks. P.S. they only gave us 2 hrs to do the job.
@davidboyce6427 11 місяців тому
Tool Time with Bob👀. Continue the creativity with the brushes 👍👀
@ChemX 11 місяців тому
Yeah we had some fun here with those for sure
@davidboyce6427 11 місяців тому
Last year when I saw you place a detail factory interior brush into your power drill to clean the cab of a semi truck. It was then I knew you were a Master Jedi😤. Show us the way🫡
@ChemX 11 місяців тому
This is the way😁
@Crazy49er 10 місяців тому
I bought the same ryobi 1800 a couple months back for $99 ..so far its pressure washed parts of my house, 3 cars, and cleaned a 30 year old driveway / sidewalk went from dark grey to creme colored.
@alezxiccamposstp578 11 місяців тому
No me esperaba que fueras hacer un video de esta maquinita Yo ya la tengo casi por 1 año y me ha salido muy bien .
@pastpageshistory 3 місяці тому
Looks great! Lots of hand work to do these. The only thing I’d add is get some rust oleum spray paint in matte, satin, and gloss black and touch up the rust spots where there’s black paint. Will help keep it from rusting more and will make it look almost new. Wouldn’t do it on cars but for heavy equipment it’s no problem at all.
@shagerstrand 11 місяців тому
Nice video. Im from Sweden, and we get alot of roadsalt, oils, traffic film etc... We use cold degreser before alkaline degreser. Mostly on asfalt dots and tar. So a tar remover before alkaline, try it out!
@motosessions 8 місяців тому
And I thought auto detailing was satisfying! Very cool video. Wish I became a heavy machine operator.
@mikezupancic2182 26 днів тому
Wow, i would have given up after 10 minutes with that little thing, but im impressed.
@M.TTT. 11 місяців тому
5:12 I've carried one of the milwaukee knives like that for a couple years now, definitely super useful
@AJNpa80 11 місяців тому
I've blown apart 2 of them plastic QC wands in 20 minutes, long story, but being light and quiet was important, got some electric washers just for it, they worked alright, same rating they said, parts fit each other, trigger valve blew to straight open the shaft split, switched to other gun did the same. They can wash things but hoses and wands have to be dedicated to the unit, and they aren't designed for regular use for long stretches, or volume, rinse your car weekly for a season, or deck each summer if stored properly.
@tekker8308 8 місяців тому
Were you putting hot water through the ryobi? If so, is it rated for hot water? I have a cheap green power washer (not any better than the ryobi) and it says not to use hot water, but that's what helps cut through grease so I wondered if the ryobi is able to use hot water.
@JordanProud23 11 місяців тому
great job and video as always. I work for a rental company and clean all the equipement that comes in and it would sure be nice to have some of that heavy duty. The shop does not go easy with the grease gun!
@ChemX 11 місяців тому
Thanks bud yeah I don’t envy your job degreasing equipment is a lot of work lol
@JordanProud23 11 місяців тому
@@ChemX yeah it definitely isn’t the funnest job in the world but hey it’s work
@BRAZY5UMMER 4 місяці тому
Lil man know a thing or two nice save on the perfect brush setup big brain activity I love it
@stevem7736 8 днів тому
That is very impressive.
@minutemanmac 11 місяців тому
I love my Milwaukee folding knife. Another great video Bob. I just picked up some Snake Oil to go with my S&S. Gotta get the John Deere all shined up from her winter grime!
@ChemX 11 місяців тому
Thank you sir! Also best knife ever I bought ten of em for my team too
@centexan 10 місяців тому
Man, you cleaned that like you're gonna sell it! I've used a number of Ryobi products and haven't been disappointed.
@frazjuno3708 11 місяців тому
I have the craftsman electric version, it’s literally identical. Same gun, same foam gun, same connection type. I love it, a longer hose tho would be beneficial.
@ChemX 11 місяців тому
Yeah I was impressed by this thing, is the craftsman red? If it’s red I’m gonna buy one
@frazjuno3708 11 місяців тому
@@ChemX The model is CMEPW1700. It’s like a rectangle prism shape with a red center and black outer. It has a handle on top and I’ve dropped it off a wall a couple times it’s very durable lol
@95dodgev10 11 місяців тому
Fun fact, don't leave snake oil and stars and stripes in an unheated garage over winter. The snake oil suffered some separation and has waxy chunks floating in it and the stripes specifically for some reason lost most of its color. Still using both and the snake oil seems to work fine I've just remixed it best i can. The stripes is pretty weird cause it no longer is bright red its like a subtle organish red hue.
@ChemX 11 місяців тому
Those issues are not from freezing actually. Red dyes fade in uv light over time, that bottle of stripes will still work the same. The snake oil you got was probably my earliest batch which had just a hair more sio2 than the water could hold after few months storage, we fixed that issue since so send my team a screen shot of my message here to orders@chem-x.com and they can get you a replacement bottle coming
@95dodgev10 11 місяців тому
@@ChemX I've used a majority of the snake oil (it was the 32oz bottle) and last use it seemed to work fine still so not worth the hassle. However i do appreciate the feedback and offer. Overall I've had good experiences with most of the products and soon i will ge ordering more stuff. Ps maybe another scent option for the interior cleaner? My wife likes the green tea but while i don't dislike it, i don't love it and I don't generally care for leather smell either. Thats personal preference however the stuff is definitely an effective cleaner so overall im happy with it as well.
@ChemX 11 місяців тому
Thanks bud yeah we’re going to get some more scents going soon that’s def needed
@user-mn8lz7gf6d 10 місяців тому
she was so happy playing! I wouldn't get any work done with her around.
@richardwatts20 10 місяців тому
Just found your content, I’m a UK bro, your content and products look dope
@stevesmith-wc2gb 11 місяців тому
There is a power outlet on the scissor lift platform just plug an extension cord in at the ground of the lift
@badlighting 11 місяців тому
This video has taught me that yes, it is possible for me to wash a Tonka truck with some elbow grease and a box of Scott boxed rags
@RobertWilliams-mu7qx 11 місяців тому
The chalky look to the paint is actually paint oxidation which happens to vehicals that are exposed to the elements and sun
@ChemX 11 місяців тому
Yeah I agree I think that’s what caused it as well
@CarterBuilds 11 місяців тому
super impressed with you and the products buddy i own a heavy equipment co and have been a customer of chemx we use a karcher hot washer and light chemx products machines always come out looking new ! deffitnetly need a better sprayer to apply it we tried the milwaukee fuel sprayer but their junk time for some mtm cannons
@aarongonzalez2156 5 місяців тому
It will be $50 on black Friday. Best entry into pressure washing for detailing! Don't forget to copy the obsessed garage upgrades
@markroberts1858 11 місяців тому
Didn’t even realise you were in the videos. I only watch here in 🇬🇧 for Kona ! ❤😂
@ChemX 11 місяців тому
She def brings in all the views lol
@jesseboyden3119 11 місяців тому
That sawsall brush was actually a genius idea. Could be a gamechanging product with a little refinement
@KrhwoodworkingandSnow 11 місяців тому
Did he just buy a new excavator to use? That’s incredibly clean. I wouldn’t wanna drive it after you did this. Nice work.
@youmebornfree 25 днів тому
I am surprised I don't see every comment talking about the tool hacks. Brilliant. Must do.
@tivonbandyjr.1705 10 місяців тому
The ingenuity that man has... lmao master of all problems
@NeillWylie 11 місяців тому
That mist gun thing is a beast!
@UnniG 11 місяців тому
A Classic :) Awesome :) Enjoying it :)
@moter3d 11 місяців тому
Amazing difference! Love watching your videos. How do you deal with all the dirt/sand/mud washed in the drains ?
@redeyez8288 11 місяців тому
Filters in the drains then clean them regularly
@9fiveb180 4 місяці тому
A catwalk above the wall with the windows would probably be a handy and economical asset to have for the larger vehicles and machinery that come through there. Also more solid and cheaper from an insurance perspective than the scissor lift. Maybe? I dunno..... Just one of my random thoughts.
@kitten_crazyyy 11 місяців тому
The nonsense is great! Love the videos you make! Next, you should do another excavator, but do it the opposite way as fast as possible using the best equipment.
@Buggy13061985 11 місяців тому
Cool 👍 very clean. Doesnt is make electrical Problems with all that foam an steam around the interior switches?
@22josta 11 днів тому
can you do a video of cleaning a pontoon boat? id be interested to see how you'd tackle the staining on aluminum toons.. preferably un polished toons haha
@ChakatNightspark 11 місяців тому
Next, should try going to a Landfill Site and see if can Wash a Garbage Truck. Inside and Outside.
@ChemX 11 місяців тому
I did a landfill truck a little while back covered in sewage lol, I gotta work up my enthusiasm for another one first🤮😂
@ChakatNightspark 11 місяців тому
@@ChemX Oh, Im talking about a Garbage Truck Truck. Like the ones that go around picking up Garbage around the Neighborhood The 1 or 2 people in the back jumping off and throwing the cans in the back and all .
@piggietruckerjones7545 11 місяців тому
This is the same pressure washer I use on my semi truck every week. Welcome to my world Bob. LOL
@ChemX 11 місяців тому
You have my sympathy sir😂
@burgerjointgame 11 місяців тому
Hi, I just discovered this channel and really enjoyed the video! Just wondering, so is this your business, to clean these machines? How much do you charge to clean that excavator? Do you do charge by the hour? Just curious!
@raymondreyes4244 11 місяців тому
Thanks!
@ItsRyan. 11 місяців тому
Have you ever noticed a difference in foaming a product vs a traditional spayer? Is the cleaning capability exactly the same? A side by side comparison would be nice!
@ChemX 11 місяців тому
The foam just helps the soap stay there longer, so it does get a bit more time to do it’s thing, mostly I just like the way it looks and sounds on video 😂 🤷♂️
@jeffreyiaia8592 Місяць тому
love the dog.
@nathanbull7790 11 місяців тому
That was an hour well spent! The inside of that is straight out of a Hitachi!
@mikehuffaker3593 11 місяців тому
How can you not like Kona?!?
@TXDeathInvestigator 28 днів тому
Definite bonus points because of Kona!
@btbd2785 11 місяців тому
I like that shorter wand that ypu have on the Foam pro 12. Was that an iption that they offer or did thatr come with unit?
@tylercolvin8653 11 місяців тому
I would like a series where you test stuff like this
@ChemX 11 місяців тому
Yeah I think that would be fun
@matthewwingle4637 6 місяців тому
Great video. Bob is fucking hilarious and keeps it entertaining. Reminds me of my friends back home in Boston.
@stephenlouden480 7 місяців тому
got a NorthStar washer 20 amp electric variable psi 900 up to 3000 at 1500 psi im getting 2.5gpm with a 5.0 orifice nozzle. thing wasnt cheap at 1250$ but it has auto start stop and can change the oil and motor if it dies. that's why i got it. people think the Kranzle ones are best 😅 yeah right. you can get a electric washer way better than Kranzle for the same price. i love when you destroyed the Kranzle in a video. u r the best
@dolofonos_2351 11 місяців тому
Looked clean to me from the start
@Miniscapes515 Місяць тому
Props man. This is nasty work. I have just a small excavator and tractor I hit with the hotsy once a year. It's a messy job getting clean. Grease sucks.
@jodyguy708 11 місяців тому
Love the videos, more so the heavier duty stuff and..Kona of course. I wanna know the name of the song you had playing at 30:05
@ChemX 11 місяців тому
Man I couldn’t tell ya I’ll have to look at my edit to grab the name I’ll get back to ya
@johnmack1399 11 місяців тому
Love the video bro! What do you recommend for my wrapped 2022 Silverado business vehicle soap wise?
@ChemX 11 місяців тому
Thanks! Yeah Stars and Stripes if you have a power washer and you want to save time, or liquidx if you want to get hands on and make it perfect
@johnmack1399 11 місяців тому
@@ChemX it won’t hurt the wrap?!?
@TWints 11 місяців тому
Next video idea: cleaning construction equipment with only the ryobi power washer AND the only agitation you get is an Oral-B toothbrush 🦷
@ChemX 11 місяців тому
I’m always up for doing things the worst way possible for a video lol
@ronlawson5819 11 місяців тому
That Milwaukee razor knife is definitely the bomb,edc for a year
@ChemX 11 місяців тому
Definitely agree 100%
@Zairn12345 11 місяців тому
I’ll never complain about washing my truck again.
@paweisyn7446 11 місяців тому
Awesome job and video.
@steverone7623 10 місяців тому
Have you checked out the ryobi 1 and 2 gallon 18volt garden sprayers yet?
@JNHEscapes 5 місяців тому
Couple of serious questions: what is the going rate for a job like this? Also, are you concerned about electronics or that much moisture on switches and buttons in the cab? They’re not exactly designed for pressurized direct spray. If I did this job it would throw a code as soon as I finished…is there some type of disclaimer you give your customers for such problems that might arise? Love the work.
@aminzy1471 6 місяців тому
I enjoyed alot👌👌👌👍
@electrickingzton7678 11 місяців тому
you should definately get a gease bucket to put all the grease, that way you save lots of paper towels and save trees. Just wipe the tool on the bucket wvery time to dump the grease off.
@ChemX 11 місяців тому
Man that’s a pro tip I’ll def do that, but hopefully not soon I want to wash some normal stuff for awhile lol
@danstankiewicz8222 11 місяців тому
For the type of flooring you have, this model is perfect. For homes with more carpeting I suggest the powered nozzle (electro power nozzle).
@Aaron-is9xo 4 місяці тому
I guess at leased its well greased machine. I’m sure a lot of machinists would be happy to see it. lol 😂
@markgoogasian9004 11 місяців тому
Just curious about the overall approach to cleaning the machine. My idea would be to work from top down. What about the job made you sequence the way you did?
@ChemX 11 місяців тому
I started on the bucket end to see how the paint liked the degreaser and then started from the top after, def start from the top the grease will go on the lower areas and you’ll be degreasing several times lol
Chem-X
Переглядів 537 тис.
Суспільне Чернігів
Переглядів 788 тис.
Ми - Україна
Переглядів 348 тис.
AutoHeadz
Переглядів 480 тис.
Waldo's World
Переглядів 1,8 млн
WD Detailing
Переглядів 555 тис.
Funny Video Million View 145
Переглядів 3,7 млн
Car Accessory World
Переглядів 11 млн
INCIARTE4x4
Переглядів 10 млн