Usually the haters are in some way envious of you; they hate you because you succeeded where they failed, or you are successful when they're falling short. Their answer is not to better themselves and compete with you, but to try to bring you down to their level and beat you with experience.

I'm a normal person, with a good judgement compass. Followed for years, and and have nothing but respect for you. The haters are the outliers. Carry on as you are and don't change a thing.

I'm not even a domestic electrician, I run a vehicle cctv and gps tracking installation company. Yet I still watch your videos religiously because you're a watchable, charismatic, genuine person. Fuck the haters. Who has time to sit and email somebody they don't know with hate and trolling? Obviously nothing better to do with their sorry lives

i think society has become a cess pit of toxic spite, hatred, jealousy, selfishness, inconsideration and rudeness. ffs people, sort it out! The more rich and government hoover up all the wealth, the more people fight each other.

Ignore them mate, they won't ever change. You have a fantastic channel with over 100K people on your side.

Nick I appreciate your candor and humor in all of your content. I am in the same boat in many ways, lost both parents, the girl I was to marry ended herself shortly after her twin brother did, depression, thoughts of ending myself, the list goes on. I am so glad to see your success both in your business and on this platform, it gives me hope. Cheers.

Watched you for a few years now, aswell as others trades on youtube. I never get why sad little people feel the need to send any hate to people. Just don't watch, it's pretty simple!! Glad to see the content up and running again, all the best and thank you for sharing and entertaining us🙂👍

It's the Internet. There will always be a small proportion of oddballs and jealous types. Just ignore them. You, David Savery and John Ward are the best electrician UKposts channels there are.

Listen mate you are one of the best electrical youtubers out there and me and my pals love your content and character. You have developed great presenting presence, very interesting videos and are open and honest with all aspects of what you do. Even when your on the fence with 'how would you do this/that' and ask your viewers how they would approach something. Please dont start going down that rabbit hole of paying attention to what mudderfookers have to say otherwise I would be disappointed in you. Just understand its the nature of the internet and some are not happy with their lot. Onwards and upwards & keep smashing it mate It takes a lot to invoice, quote, write test sheets do the actual work and then film, edit vids. Inspirational fella!!!

Haters are just jealous mate ignore them, keep doing what you're doing 👍 😊

You don't have to explain yourself to anyone, F them, you provide quality knowledge, good humour and you seem a decent bloke, keep it up mate and I look forward to your next video

Having met you at Elex and having a conversation with you I can’t understand the hate. Gave me some solid advice and just a top genuine bloke! Keep going mate! Just gotta pluck up the courage to get going with UKposts myself now 😂

Where practically possible I always use a plumb bob line & road workers line marker spray and put an X on the floor directly below where the down lights going , or if the windows staying , to use the window frame as a measuring ref point 🤔👍🏻

Twisty button is an old Robin tester throw back. Looks a good bit of kit, ignore the wats (silent T)

Alright Nick, I'm a gas engineer and watch your content, really for the quality of your work and finish you achieve , top work mate.

Advantage of having the older Kewtec is they have ironed any bugs out of it. Proven design. I NEVER buy the first run of a new design of anything - I don't like BETA testing for companies by being an early adopter.

I never understand how with so many people wanting down lights they don't just have the old ceilings down it's cheaper and a better finish then patching up

I've had my kewtech kt65dl for about 7 years, been great! Easy to use, easy on batteries. That optical adapter is for connecting the tester to a pc so you can down load (that's the DL bit) the test results to a spread sheet. You only need to press the testbutton once, no need to lock it off unless doing stuff like earth continuity where you need both hands free using the probes. It just looks like an updated kt65dl with new screen graphics to me. Also ignore the haters, not worth the rent free space in your head mate 😉👌

Never justify yourself to strangers on social media mate! Keep having fun and posting content for us that enjoy it.

Man, keep up the good work/uploads/ and for me the knowledge you share about your work and how/why you go about it, I,m still learning and find your content really useful and more importantly enjoyable to watch. Your narration is just as it should be, honest, full of humour and down to earth, you do not preach, you just say it how it is for you at that time. Do not let the keyboard warriors change that, the net is full of folk who will just sit there trying to make people feel bad, they probably have no life to enjoy, so they are determined to try and ruin others day, easy to say but just ignore them, dont give them a reaction, that annoys them more than anything! You have a loyal following and we will support you, no matter what anyone else thinks! Many thanks for the uploads, appreciate them and enjoy watching them!

"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt." Keep it up Nick 👍

My husband and me dont hate you we admire you ! Keep doing what your doing your brilliant 👏

You're a diamond. Ignore the haters. If you only dislike you job 1% of the time, that's only a couple of days a years, and I suspect you'd even tell your customer "Sorry just having a bad day" and still be genuinely nice about it.

You don’t need to hold the test button like that btw. The twist and lock is just for when you’re testing something that’s intermittent. I love my Kewtech but I don’t know anything else.

Bought the Kewtech 63DL as it was cheap when I first started my company around 6 years ago. I still use it now, it’s brilliant! And the batteries last 6 months+

Pride in your work bud, same here, all the respect you deserve.

I’ve got the KT64-DL and the 65-DL. I LOVE these testers, Kewtech have been great to deal with any issues. Can’t go wrong with how simple they are. I think you’ll love it

Getting feedback and having debates or arguments is one thing (personally I enjoy those as I learn) is TOTALLY different to some of the hate you shared on insta recently and have shared before. Those people do not deserve a single second of your time. Having met you in the real world a couple of times and shared podcasts with you. Im happy to report aside from being on handsome sparky you are just like every person out there trying to get along in life. Helping others as you go. Your smashing it and its great to see.

Just a thought as it seemed like a lot of time went into finding the downlights. Either or if you put a neodymium magnet or piece of steel in the hole made originally. CA glue a cardboard jig in place with a reusable core thats 3d printed say that could be a game changer. A card tube glued in place with an interference 3d printed plastic core holding a magnet or steel. Bang on centre accuracy for you to find and drill up into. when you drill up central youd just be hitting the disposable cardboard

You are someone buddy, your work is great, your an inspiration and I tune in everyday to see your new stuff, iv followed you through all my training and tell everyone to watch you

I loved being an Electrician and helping people. yeah I ended up doing jobs above what I'd quoted but,helping people and making them happy cancelled the lack of remuneration didn't matter. Ill health has stopped me now but,yet again, I try to advise people about what they need to know when finding somebody to work on their house

You’ll love the KT66DL, had mine now for 3months and it’s amazing. And you can save the test data to the internal storage to download later. Great for when you want to double check test measurements. Enjoy!

Good on you! Keep up the great content and I will keep learning off you. I’m a 41 year old ex chef that loves the new sparky trade and has ALOT TO LEARN. And you help me. 👍👍👍

Lots of respect for the close to the video and the words about the origin of your channel. Hate is the scurge of "social media", it's really unecessary and it shows our society is becoming increasingly disfunctionally IMO. I think we should communicate online with the same courtesy as we would face-to-face, unless there is a good reason not too! Sounds like much of the hate is born out of jealousy for the success of your channel and perhaps also your personal life as a family man also managing to run a successful business. As someone who has also struggled with grief and depression, and runs a far less successful and established business I wish you all the best with it.

Just delete and block the haters. The look on your face when you twisted the Kewtechs lid around was priceless. Thanks for all you hard work.

Just be who are, honest that's good enough for me, keep up the good work you do👍

Love my KT64. Had it for years. Found it hilarious that you didnt know how the lid works. I keep promising myself a KT66.

Using kewtech mtf for years now great bit of kit.No problems till last week kept failing the rcd tests,2 months out of warranty on its way to kewtech from Ireland 🤞 they can take care of me and get it sorted.

Big fan of Kewtech stuff 👌🏻 That is a nice wee tester.

Nick any news on your testing bag and sleeve it. I’ve just got rid of my Megger X1 really miss the bag as it was the best part of the meter. Your small testing bag looks to be a good replacement when it lands

My megger x1 has been doing the same thing, so I tried using the red lead with the button instead of the standard red lead and surprise surprise no issue since so possibly a problem the the test leads rather than the tester itself 🤷‍♂️ really annoying either way 🙄

I want an MFT!!! After he waffles on he gets to the point @14:30 Love your work mate!

that KT66 is a crackin little tester mate. I sold mine when I got employed and the company use Meggers which I really don't rate at all. Wish I hadn't sold it they just work. I trained with a kt64 and used it for over 10 years. Kewtech are in my opinion the best brand with Metrel coming close as I do love my Metrel MI3125.

Great post Nick , sod the haters , I qualified back in 1986 and love watching your posts you never stop learning.Keep up the good work

How do you work out how many downlights a room needs? Just watched the rest - It's people like you online that showed me how to be passionate about electrics, before it was just a job, now I do really love what I do.

Never doubted you bro. Pretty much everything you said in that little monologue at the end is exactly where i am right now. Keep up the good work dude, Respect

I went from megger to Kewtech the 66dl a really good tester and easy to use what the megger Use to have over the Kewtechs is a 2 low loop test this tester has not incorporated that

Have you still got the posh wall scanner? Any good running it over the ceiling to doublecheck joists against photos before cutting out?

For £50,000, you can be perfect, every time! Cavity scanners with a display (: They show you exactly what's behind the wall, you can find your holes and joists like the wall isn't there.

Way I measure my lights is off one fixed object like your patress and then laser line the room , and measure off from the first light installed. And I would have put the light switch on the adjacent wall so it's not behind the door when opened. What do you prefer the kewtech or the megger ?

Haters are gona hate try just brush it off ive been watching you and Adam for a couple of years I see two ordinary hard working men that enjoy thayr work & make light harted content that us other sparks can relate to with banter etc brush them off nick👏👍

HI Nick, just ignore the haters don't read the emails just delete end of. Your content is great and down to "earth" , I used to be in the trade years ago but health issues put a stop to that I have now gone back to my old hobby of electronics would love to have a UKposts channel but haven't got the bottle to do it. Keep on sparking mate looking forward to the next show👍😀

Larger hole for spots before it gets boarded to make life easier is so simple but great idea. Annoyed I didn’t think of it sooner. 😤Nice tip 👍👍👍

😂 your face when the tester lid clicked into the back of it

I always enjoy your episodes, especially as it is a spectator sport for me. Always clear and respectful of others.

I'm not an electrician. Just a keen DIYER. I enjoy your videos and keep up the good work.

You’re a good guy Nick with great content that I love to follow!!! You always have been and never changed in the few years I’ve been watching you 👍👍👍 from me mate!!! 👊♥️👊 I’ve been getting on very well with my first tester Di log 9118 that many said was garbage but it’s done me well over the last 4 years. Calibrates fine every year. But I have been looking at getting a Megger 31 or 41+ due to the EV use now. But I also use Kewtech leads for everything and they have always been bang on. Kuoritsu I think 🤔. Best leads I’ve ever used as Megger leads are not fun on the probe ends as we all know. Break out boxes etc. But I think that’s changed with the X1 leads. If anyone is looking let me know what MFT you would recommend and if to stay away from Megger? Keep at the grind friends!!! 💪💪💪 Best regards, Scott. ✌️🙏✌️

Never understood the haters 🙄 You put out great content that's easy to follow and usually teaches us a thing or two 😁 that's a win in my book!

I respect you Nick and I enjoy watching you and the content is good , never worry about the haters they will move on when they see your not bothered by them..

I guess there's no chance we can recover a true meaning for 'hate'? Hate requires genuine anger, not ridicule. Spite and jealousy are something entirely different.

Hold that head up Nick, there's only one um and it's F**k um bud , top video as always 🤙🤙

These haters; would they have the courage to say these things to your face, I wonder! For what it’s worth, I think you are a great guy and a solid electrician and I love the way your passion shines through! Keep it going, Mate!

Nick, you are a humble man. You have just enough self confidence that some people find it threatening. Mostly because they have none. Please ignore the haters as their point of view is badly skewed. I love your videos for many reasons. I see no reason for you to change anything. One of your most appealing characteristics is that you are authentic. Carry on, mate.

Ignore the haters Nick, love the channel so keep doing what you are.

Takes a lot of courage to let others see your work on such a massive scale. Love your videos mate, don’t listen to the haters

We’ve had the kewtech and ev point exactly what you’ve got there and cannot Fault it at all pal

Nick. I started watching your videos because somehow UKposts knows I’m a sparky. Been watching ever since. You seem like a top guy to me mate. You care about your work & the people you work for. Top man 👍

You're a good guy mate, met you a few times, always had a good conversation. You're the top sparky on UKposts (sorry Jordan!), you're an easy target, so people will attack you. I do UKposts because I like to help Apprentices and newcomers into the industry find a different way of doing something, I've learned a lot from other YT sparkies. I'm also having a hard couple of days because of just a couple of annoying customers and someone having a go at me yesterday because apparently I'm trying to con them as my EICR price is double what they have found but that's another story altogether (video coming soon). Keep your chin up mate, BTW, testers name can be Katie?

the multitool blades for downlights would be a treat here and make sure you don't nick anything

Haters will always hate, because they have nothing positive in their lives. You have us, we all think you are wonderful. Sometimes funny, sometimes educational. Always a pleasure. One day I would like to work with all my heroes. When are you free 😁

Don’t take the hate to heart. Deep down those people are doing it either out of jealousy or they are in a bad place themselves. You will never really find out who the good people are until you’ve been to the bottom and to the top. Keep up the good work. Genuinely watch your videos as you are a likeable character. If I thought you were in this purely for the cash would have bin your channel lol. Just checking your not selling a business course on the side are you for stupid amounts. 😉

And you can test SPD with it also

Nick, I watch a lot of YT as it's on my second monitor most of the day. You are one of the most genuine guys that I see, on YT, and I look forward to your videos coming online. The haters are sad little no-bodys. Your content is fun, entertaining and informative.

You've taught me alot sensei :)

I’m a plumber and I’ve been following you for years, anyone hating because they don’t understand where you’ve come from to where you are now aren’t worth your time worrying about dude… if a plumber can follow and enjoy a sparkies content you must be doing something right 😅

Hi mate, when is your tester bag coming out? Desperate need of it!

Take no notice mate I get the same

I’ve followed you from day one and I’m like you I enjoy my work, and I’m a chronic overthinker, anxious, I’ve made my way in electrical industry (heavy industrial/trains) so from me to you Nick remember people’s opinions are like a#seholes….. we all have one, don’t bother with the clowns that attempt to bring you down, you’ve came a long way and brought young Adam up into trade and look at his journey, that’s a positive, keep doing what your doing

Kewtech tester, and Milwalkee tools... Chris?

Sorry I am not understanding, when the room is unfinished and will have a new ceiling, why not cut out a bigger part of the original ceiling to give 100mm or 10cm (Nick knows the difference) wiggle room in each direction ?

Pretentious is certainly not a word that springs to mind when I think of you Nick, far from it. I like watching your channel because of your sense of humour, you are good at what you do and you keep it real. I follow other UKpostsrs of completely different content and they get a lot of Trolls too. Ignore them, belittle them or engage with them, do what you feel is right for you, but know we love you for who you are ❤👍😀.

Nick, you are a nice guy and dont let anyone tell you otherwise. Unfortunatly theres always going to be a small percentage of people who are jealous of the success you have. You must be doing something right to have so many followers and subscribers. You show your work, mistakes and all, and i for one appreciate that as when it happens to me it helps to know that it happens to others and so you dont beat yourself up as much. Dont be put off or stop doing something YOU enjoy because of a minority. 👍 Sorry for the long winded post.

Love your style and content Nick. Nothing fake about you dude and that’s rare these days. You say it as it is, laugh at yourself, and are completely transparent. That’s why you have so many followers. Big difference between a hater and a stalker though!! 🤣 Well done and keep on keeping on dude.

Fuck the haters mate, your the most real honest content creators out there, appreciate your work bro 🙏

Nick, I like the way you suddenly appear at each lighting position when cutting out your downlights. Do you have magic ladders 😂

owned the kt66 since it came out, love it

I like your videos and I like that started creating them as a way to help your own mental health! You def DO NOT come across as thinking "your all that" in your vids. Been struggling myself for 15 years. Screw the haters, keep up the work. Also its great to see trades who are proud of their own work and prepared to show it off. Oh...... if your ditching any of the Bosch kit in favour of "red team"? happy to accept donations!!!!!! Would love an impact driver or circular saw for my home diy!! lols

Hi Nick I’ve followed you for many years now and will confirm to do so, I’ve watched how you have progressed and admire you for your honesty etc you show the good and bad days being an electrician, you’ve helped Adam become an electrician too, you don’t hide the fact that you don’t know everything and that everyday is a learning day,Ignore all the Hate you have many UKposts and Instagram followers for that reason your a genuine Guy

It's easy to focus on the negatives. You're a good spark, a great husband and dad doing your best to provide for them. You've managed and cultivated a growing following from nothing and getting sponsorship opportunities. The vast majority of the comments on your videos are positive and that's reflected in your like/dislike ratio. There's literally no point focusing on the tiniest minority when they mean literally nothing. Block them and move on. You don't need to justify yourself to them. Focus on the 99% of respectful interaction you get. Next stop 110k.

I watch because your skilled, I'm training to be an electrician well hopefully, all sounds complicated. There will always be haters

As a fellow sparks, crack on m8..... let them go elsewhere👍👍👌👌

Not a hater, but rather someone waiting for you to dip your toes into some more sophisticated stuff like DALI lighting, which would have made so many of your projects much easier, while opening up so many options for more clever and capable lighting. Hope you’ll have a look ar Dali2 (and KNX) one day.

Don’t take any note of nitwits! Neither waste mental or emotion energy on negativity. Enjoy your life and what you do. We do!

You’re a great guy mate! Keep up the great work!

Hi Nick, you are someone, you are someone that is doing well and is highly regarded, during my training you were getting great reviews from trade skills for u , you are a good person and dont let the haters get you down, keep succeeding bud, keep doing what your doing, I’m certain that your father would have been very proud of what you are achieving.

Keep up the good work Nick and ignore the haters ❤

❤❤❤❤❤❤lots of love brother, keep up the good work.

Mate , just concentrate on all the good ones that follow you and appreciate you for who you are and the good content you post . Don't let the haters drag you down just block them

Fuck the haters , they will just hate , keyboard warriors! You a honest man with humour, videos are quality viewings. Unlike some on here more interested in camera angles and product placement and endorsements. Keep doing what you’re doing, shame you going to the dark red side though !

Never explain yourself to any of the weirdos, nobody forcing them to watch your videos. Been a spark for over 40 years more industrial maintenance and appreciate the content from yourself and artisan.