Channel members get early access and video shoutouts: / @mattie_y Music by / @officialphilman Vivaldi's Winter: • Winter - Vivaldi [COPY... 10 AM and 2 PM from Lud and Schlatt Crossing: • Lud and Schlatt Crossi...
КОМЕНТАРІ: 320
@jacobpalomarez53496 місяців тому
nothing can quite describe the genuine panic i felt when i watched you actually turn on that dryer.
@mattie_y6 місяців тому
it freaked me out when i filmed it
@ibisgamer22816 місяців тому
@@mattie_ywhat were you thinking!? then again that gag quenched some primal urge inside me to see a nurf gun in a dryer? I have no clue but it quenched something
@mattie_y6 місяців тому
its the quenchiest
@cosmicsnacks11916 місяців тому
@@mattie_yDRINK CACTUS JUICE
@TwinBlades16 місяців тому
@@cosmicsnacks1191no
@chez24856 місяців тому
Goes from harmless nerf gun to painful nerf gun in about 10 seconds, love it
@jangschoen10196 місяців тому
I just love that unscrewing equipment is becoming a running gag. Also, I was expecting sabots at the end, but a 3d printed dart also works.
@mattie_y6 місяців тому
you’ll never see me use a screwdriver
@ANameToGoBy6 місяців тому
@@mattie_y Why would you? Clearly what you're doing works!
@agiliteka6 місяців тому
a sabot would be sick to see, might not work at this scale, but a subcalibre dart might go a long way
@aidanlimhuadenghshs6 місяців тому
As a nerf and firearms enthusiast, I thought of tapping gas out like a real rifle when I heard about the dart bursting. If your theory is correct, by drilling a hole near the end of the tube, excess "gas" will be tapped out and you can use it to load another dart /j For those wondering, that last bit was for real rifles. But in this case, I suppose just having a tapered hole near the end of the barrel can possibly remove excess air. Matt, you should really try this and put it back into the shell and do cosmetic mods and make it cooler! Although this was cool enough. Seeing your streak of pressured air blasters, what about using the tapped gas into a extra gas chamber, then using the extra air, why not make a masterkey? Im no engineer but using my logic, it is possible to do so. Also, I almost had an aneurysm seeing you put the blaster into a dryer- I should do that too XD
@gdplayer196 місяців тому
Maybe a curved end like a blunderbuss so that the air escape isn't as harsh?
@Katvanished6 місяців тому
I was thinking the same thing. drill some holes in the long barrel, then stick a "muzzle break" over the real muzzle break to make it look good
@trap93886 місяців тому
I think the issue is that the dart bursts before its hardly even moved, the air slams into the dart and bursts it before it reaches any real speed. Maybe isntead he could either use some form of packing material/wadding to absorb it, or use harder darts. the longer barrel was a good idea but maybe not long enough.
@tovarisch34906 місяців тому
Maybe you can redirect the air to push back a piston that can do something in a similar fashion to an AK
@aidanlimhuadenghshs6 місяців тому
@@tovarisch3490 Thats the inspiration haha
@Bushydem0n6 місяців тому
The commitment to the unscrew dryer is amazing
@DoubleL118626 місяців тому
I thought you might go with a few less pumps to fix the bursting issue. Then I remembered which channel I was watching.
@mattie_y6 місяців тому
lmao
@f14e916 місяців тому
I love that you also show what goes slightly wrong and how you overcome it! We need more people like you on this platform❤
@juancabardo216 місяців тому
He modified a nerf gun just to save his channel members, what a guy
@ANameToGoBy6 місяців тому
I love the idea of a Nerf war (with like jolts) and some guy comes up with a long thin tube, ready to wreck people from a distance.
@mattie_y6 місяців тому
toob
@Sanguivore6 місяців тому
To be fair, in the hobby a lotta people used to use exactly that back in the day. Long, thin, powerful tubes may not be the prettiest, but they can be darn effective!
@VaIentineUK6 місяців тому
Your videos always manage to be engaging, informative, funny and well produced. Surprised you haven't been at this much longer with quality like this.
@anatali1216 місяців тому
This was my favorite blaster as a kid, traded a bunch of plastic lightsabers for one! Something that you might know already, but could be useful if you don't, is that this one came with special high density foam darts with solid plastic inserts as reinforcement. Your final 3d printed dart design is not far off how the original darts worked! If you wanna look into it more, they were called "Buzz Bee Extreme Darts" and the stock blaster can do 3-6" groupings at 50-60 feet with them!
@mattie_y6 місяців тому
wowee!
@nathanwatson2966 місяців тому
Love the commitment man. Keep up the good work!
@busyyoungexec6 місяців тому
Whew! I was worried for a minute 😅
@seegurke20216 місяців тому
I am just a little Boy from germany and i dont matter to someone Like you, but i wannat to Say thank you for These amazing videos! (Thank you?)
@mattie_y6 місяців тому
you are welcome!
@seegurke20216 місяців тому
PS: I‘ve always Wanted to build something Crazy Like this, because i am an Hobby-Engineer And i did it once with a Nerf Stryfe. It didn‘t work. Can you maybee build a Nerf shotgun off a Insectizide sprayer? Ist’s my biggest Dream to do this myself and i Really want to se it come Alive with your channel.
@kaleoshepherd51746 місяців тому
THE LEGEND HAS POSTED EVERYTHING ELSE DOES NOT MATTER(except taxes dont commit tax evasion)
@mattie_y6 місяців тому
tax evasion bad
@lukemagee82076 місяців тому
taxes can wait
@ALuLdz6 місяців тому
@@mattie_ytax evasion good, don’t lie to your fans
@Sam979796 місяців тому
If you were my roommate, you would've waited until 2:00 AM to film the dryer unscrew process. That was so loud! Great video, keep it up.
@shittetharse6 місяців тому
*"IT ISNT FUNNY ANYMORE, STOP WAKING ME UP!"* *"BUT BABE, MATT YUAN JUST UPLOADED!"*
@ibisgamer22816 місяців тому
How has your channel not become viral yet!?
@mattie_y6 місяців тому
remember to smash that like button
@funnyname70536 місяців тому
Absolutely love the content bro, keep going!
@tylerwilliams336 місяців тому
Nice to see somebody else running that sniper the same way.
@Oriox_6 місяців тому
love a good bit of vivaldi whilst wathcing a nerf video at 10 30 pm
@mattie_y6 місяців тому
🎻🎻🎻
@image_cafe73436 місяців тому
Matt’s disassembly methods are really efficient
@Teku666 місяців тому
I have no complaints that the algorithm recommended me this video
@LittleMissLuna2326 місяців тому
Another goated Matt video, lets GOOO
@Heavy_weapons_guy6 місяців тому
Snipers a good job mate 👍
@liamsiegel7336 місяців тому
Professionals have standards
@thegarbageman86856 місяців тому
matt deserves more views
@nathanrollick18335 місяців тому
I like how you try to tell a story in your videos and make them fun. You're doing well. Keep improving and learning. Don't stay the same.
@adammee54376 місяців тому
The dryer scene lol great stuff 👌
@bryonzajicek24196 місяців тому
What if for the 3d printed darts you increase the barrel length or increase the amount of compressed air that it could hold cause I think that it might increase the accuracy
@inkycat1916 місяців тому
you could’ve gave it a even longer barrel my man, that would’ve made the muzzle velocity higher
@UhOhBurntmeToast6 місяців тому
My boy, let me start by saying I watch a lot of UKposts. But sweet heavens do I love your content SO much man. Absolute gem of a channel you have. I’m forever in your debt and I eagerly await every upload. An unsung legend you are ❤️
@mattie_y6 місяців тому
tyvm!
@Jvalde20216 місяців тому
Now you have an effective defense against haters
@TheSpookiestSkeleton6 місяців тому
I just wanna say before I get further into the video, that buzz bee hunter was da bomb, like, I loved that thing and it could shoot so damn hard, had a bipod and a scope, loved it as much as I did the pump action drum one with the shells
@rostringstudios40956 місяців тому
Could you design some Rifling into the 3D printed nerf? Something to induce spin
@Jgreb3146 місяців тому
What's that slicy tool you got there at the beginning? Seems useful for lopping off plastic .
@mattie_y6 місяців тому
pipe cutter!
@plumbinggamer6 місяців тому
The pain of hearing the noise of a nerf blaster in a washing machine. Nice modifying!
@AppleBeesBarAndGrillMenu3 місяці тому
is that an xbz tank on the gun? im asking cause i wanna do some modding on 1. xbz tank is a pump on 1 side that holds pressure till a release valve is switched
@the_annihilator58106 місяців тому
"Look a safety restriction! With this knife we..."
@shinig4mi0mega975 місяців тому
I remember seen thebackyardScientist have the same issue with the broken darts, and they put earplugs so the air woudnt go inside them and blow them.
@floppydisk45006 місяців тому
If you put a little bit of rolled up packing tape on the inside of the barrel of the foam dart, it'll prevent it from exploding
@Xoticghul3 місяці тому
How do I get the unscrewed cycle? My clothes be having a few too many screws
@teresashinkansen94022 місяці тому
I think you could glue a reinforced tube inside the dart so its what takes all the pressure and not the soft foam body, also adds a bit of mass to make it go further.
@Shinoo_B6 місяців тому
4:58 Really wasn't expecting it to make that noise
@Kekatronic6 місяців тому
That thing at the end is basically an assassins weapon, all it needs is poison on the tip of the darts
@kennethpaschall68116 місяців тому
Making a dart in the general shape as a mortar will most likely give you much more accurate shots also what model of Nerf gun is that so I can find where to get one
@musikSkool6 місяців тому
Holes near the end of the pipe will let air out without the dart taking the pressure all at once. Though it is possible it is destroying the dart in the middle of the barrel.
@dogdog3576 місяців тому
The idea of needing a muzzle break in nerf is scary. Wonder if a suppressor would work.
@chilledburrito6 місяців тому
@@dogdog357haha, I don’t know about a suppressor. Though, in the modded nerf/custom nerf scene there are barrel attachments that add rifling for increased accuracy in springers.
@dogdog3576 місяців тому
@chilledburrito Well I know scars are a thing. But I'm curious if adding a suppressor would 1. Help reduce the amount of air escaping the barrel through the dart and 2. Make the blaster quieter due to less air escaping as fast
@chilledburrito6 місяців тому
@@dogdog357 1: It’s possible, I’d imagine it’s dependent on various factors that I don’t fully understand as I only really dabble in nerf, at least the physics part. but if the goal is to stop the dart from splitting, I’d check the barrel for extrusions first, and if there’s no problem there, I’d try a dart with less friction or firmer foam, if none of those work, putting some tape around the dart should stop the splitting, and the 3D printed projectile Matt made is an interesting way of fixing the problem LOL 2: maybe, I’m definitely not an expert on this specifically. I know for certain in a standard springer setup, the sound produced by the air is usually undermined by the plunger, and theres no point trying to put a suppressor on a fly wheeler. But since the setup Matt made, consisting of pretty much a valve and an air tank, it, itself should produce very little noise as you’d expect, and there are suppressors in Airsoft that can dampen the noise of the air exiting the barrel using a design very similar to an actual suppressor. It would probably only dampen it a tiny bit, it definitely wouldn’t be as drastic of a change as a real suppressor. You’d probably get better information from chatGPT than me to be honest LOL
@dd22206 місяців тому
Every day is a good day when Matt posts
@bad_game_dev_116 місяців тому
what mm barrel did ya use and where files? AND 3D PRINT MATERIAL?
@bad_game_dev_116 місяців тому
PLEASE
@ima_bread6 місяців тому
I literally had a panic attack when you put it in the dyer and it fell apart
@DBZLEGENDS23 дні тому
To fix this problem you need a 1 inch long piece of 3/8 pex in a brass barrel and thats it. Ive tested this with this gun and its about 215 fps. 3/8 pex is also perfect for a anti suction spacer for most applications.
@matildastanford70198 днів тому
Superglue darts to harden them up also maybe add & glue a thumbtack to front of dart to increase dart weight. More mass equals more inertia.
@Cavemancat886 місяців тому
What gun is that and where can i find it... I have some ideas...
@JacobHGamez6 місяців тому
Awesome!!! Dude, I love the videos!!!!
@triciablouin27766 місяців тому
As soon as I heard four seasons playing I immediately got guts and blackpowder ptsd💀
@AWBs26 місяців тому
You should try adding rifling with a screwdriver
@VenkmanPhD6 місяців тому
I had a LOT of success with an Airtech 3000 and using brass barrels, plugged pump and removed air restrictor. 6 shots, auto rotate, a WALLOP of power. I also used Frost king foam to make my own darts, so they couldn't explode. Old ones would still have their heads ripped off, but yeah. Would love to see you tackle that blaster
@mattie_y6 місяців тому
i do want a at3k at some point
@Kalibur_6 місяців тому
You know your nerf gun is strong when you can hear the bullet whizzing by.
@mattie_y6 місяців тому
nnnnnnnneeeeEEW
@kitotek6 місяців тому
I like your fun disassembly methods, too bad they don't actually work. (although there are some machines which can automatically remove screws)
@kozike74885 місяців тому
You can make the darts stronger by wrapping them in a layer or 2 of packing tape and trimming off the excess, you might need a wider inner diameter on your barrel though
@FuknKms6 місяців тому
Now take this to a game.
@ThePlantedTankTV6 місяців тому
If you could add rifling to the barrel it'd be much more accurate. Smooth bores are well know for being inaccurate.
@Tucher976 місяців тому
A nerf sniper, if I were to squint, I would see the laser sniper from Star wars Jedi knight games.
@plumsisaac4236 місяців тому
He just needed a muzzle brake
@allaltitudeproductions4546 місяців тому
well do remember, power does not = accuracy
@jamesrivera40156 місяців тому
I feel like it's no longer a nerf gum since you changed every aspect of it, including the darts.
@theprancingprussian6 місяців тому
May i suggest, rifling?
@MontyLand3086 місяців тому
i love these videos, they remind me of allen pan's older videos
@mattie_y6 місяців тому
allen pan went back in time and im him
@MontyLand3086 місяців тому
i knew he would be the one to invent the time machine@@mattie_y
@NannitaxTVМісяць тому
Wouldnt the blaster have worked with normal darts if you put a muzzle break at the front to reduce the air pressure ?
@djangoWier6 місяців тому
Make a scar barrel or even a slotted scar barrel, this allows the excess air to escape, fishing line scar barrel. I tride a tank mod with one of these years ago, it worked, but over powered and split darts, fluted scar fixed that.
@matthewnardin73046 місяців тому
Could probably use a little fin stabilization if you're just going to make your own darts.
@mattie_y6 місяців тому
nice name matt
@GerinoMorn6 місяців тому
You need gas port like on gas-operated firearm. Just drill some holes into the barrel about 1-1.5 lengths of the dart before exit - the gas will dissipate and the barrel will still be squeezing the dart to keep it intact :D
@Spanishfluwillreturn20256 місяців тому
Your an epic nerf tuber reminds me of the og days of nerf modding
@ihaveagun26956 місяців тому
i am so happy this guys growth recently i remember when he had only 400 subs
@mattie_y6 місяців тому
😄
@ihaveagun26956 місяців тому
hi man how are you@@mattie_y
@mattie_y6 місяців тому
not bad not bad
@ihaveagun26956 місяців тому
good@@mattie_y
@mr.pineapple84526 місяців тому
This is awesome
@jannickliche70806 місяців тому
This is just wholesome!
@mattie_y6 місяців тому
aw thanks!
@cheese-ro9cs6 місяців тому
In the first as minute and thirty seconds I could already tell he was a legend in the making
@floridaman38946 місяців тому
Good work keep it going
@Jawire2285 місяців тому
Bro, when he was looking for the channel members, he bent down and farted😂 0:27
@EricRiley276 місяців тому
im thinking the barrel is not a tight enough fit around the darts.
@Rogiebear6 місяців тому
Yay he uploaded
@jolttrontitan27556 місяців тому
Being a nerf hobbyist, the moment you said foam darts won’t cut it and made plastic bullets… my giggles erupted, my heart sank and my grin widened out of control
@filipbukowski59753 місяці тому
make holes in the end of a barrel like an end of a high force rifle (barret m95) that should make it not break
@shipe16273 місяці тому
drill holes like 2 cm before the barrel ends so the pressure exits through them
@huhanimationstudios62606 місяців тому
At this point you could cook the blaster to unscrew it
@mattie_y6 місяців тому
good idea
@elio76106 місяців тому
I just imagine Matt Yaun, a few years from now, building an actual firearm.
@frostybootz3 місяці тому
But wouldn’t that be illegal? But that may be but that would be shocking.
@elio76103 місяці тому
@@frostybootz It is just that as Matt keeps upgrading Nerf guns, each upgrade makes the Nerf gun gradually more like an actual firearm. After a few years of developments, Matt finds himself with an actual firearm.
@zeko-qp5ep6 місяців тому
Matt, you could've added a carriage for your foam darts it that helps
@mattie_y6 місяців тому
huh
@zeko-qp5ep6 місяців тому
well i mean the carriages on bullets @@mattie_y
@lanoche6 місяців тому
No scar barrel at the end? Of course your accuracy would suffer.
@frostybootz3 місяці тому
1:31 “Disassembled The Blaster modder Way”
@JohnPeter19406 місяців тому
Bro you gotta make longer videos, 6 min is not enough i want more of this quality content, keep grinding !❤
@redninja_6 місяців тому
now build the shell.
@ChraeBB3 місяці тому
If you aren't an Engineer by now, you should be. Particularly a Manufacturing Engineer, you're incredibly smart. with love, A Semiconductor technician
@Luc_s56 місяців тому
I always love your videos ❤
@Planetastic363Місяць тому
i think the darts broke because the ruber tip was stuck on the aluminum barrel causing the tip to move slower than the foam crushing the dart
@Tinkatink9576 місяців тому
Cool video like usual 🎉
@wendieghostie6 місяців тому
The cinnamon tography
@whooooosh12336 місяців тому
ive never seen anyone use a pvc cutter for nerf guns ill have to try that
@xeonx88315 місяців тому
1:50 ty for reminding me to call her.
@lagamerfuel96616 місяців тому
If you could find some way to rifle to barrel it would fly a lot straighter but I’m sure you thought of that but yknow just didn’t have the very expensive tools to do it
@BasementStudi0sМісяць тому
maybe this is why my friend was allowed to bring his nerf gun through airport security but not back