The nRF5340 DK is the development kit for the nRF5340 System-on-Chip (SoC), containing everything needed to get started with development, on a single board. Downloads and info: bit.ly/3lW1gSA
КОМЕНТАРІ: 30
@buzz1ebee2 роки тому
Ordered one of these Dev boards and and excited to start developing a new wearable powered by it. I picked this platform due to the ease of use with zephyr rtos, the fantastic selection of connection options, and the power you get for such low current consumption. Can't wait to get started! Nice to see you active answering questions on UKposts too.
@NordicSemi2 роки тому
Thank you for your kind words, Tom! Let us know if we can be of any assistance, here or on DevZone. Good luck with your project.
@kushagrapithadiya3203 роки тому
I was about to order this device kit yesterday. Thanks a bunch Mate.😍😊
@iftikharaziz8885Рік тому
One of the best presenters of Nordic. Best explained.
@yaghiyahbrenner89023 роки тому
Does the new 53 dual core allow halting the main app CPU while the networking CPU run uninterrupted.?
@NordicSemi3 роки тому
Yes, that is possible. Please check out the sample-project "EMPTY_APP_CORE" in nRF Connect SDK: developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/samples/nrf5340/empty_app_core/README.html For more technical questions please reach out to our tech support team on: devzone.nordicsemi.com
@aabdevРік тому
Where can I find a sample project to build artefact for nRF5340 from Makefile ?
@NordicSemiРік тому
We do not have any sample projects for this. Zephyr is a CMake-based system so you must use Cmake to generate the build files. You can read more in the Zephyr documentation about application development: developer.nordicsemi.com/nRF_Connect_SDK/doc/2.0.1/zephyr/develop/application/index.html
@clyriss11152 роки тому
I want to use it in a follower robot project. Do you know how I can get AoA or AoD and what can I program it with?
@NordicSemi2 роки тому
AoA/AoD is supported by nRF52833 and nRF5340. On one end you need an antenna array, which can be bought by a 3rd party or you can reach out to a Nordic sales representative for recommendations. In our nRF Connect SDK you can find sample project for Direction Finding, one for transmission: developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/samples/bluetooth/direction_finding_connectionless_tx/README.html and one for reception: developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/samples/bluetooth/direction_finding_connectionless_rx/README.html
@aminollahzakizadeh58883 роки тому
I am sorry for telling you this ,but you must work on nrfconnect ide , it does not download and install properly and manual installing is like one thousand kilometers running
@NordicSemi3 роки тому
Did you try with TCM (Tool Chain Manager) app in nRF Connect for Desktop? This is the easiest way to get the nRF Connect SDK to your computer when running Windows or macOS. If you still have issues, please reach out to our tech support team on DevZone: devzone.nordicsemi.com
@MD-qz6gk2 роки тому
I need to study electronic engineering!
@NordicSemi2 роки тому
Go for it!
@aabdevРік тому
Is it possible to obtain full schematic of this board?
@NordicSemiРік тому
Yes, you can find the full schematics in the hardware files that can be downloaded from the nRF5340 DK product page here: www.nordicsemi.com/Products/Development-hardware/nRF5340-DK/Download
@nixkoenner233 роки тому
can you mention the differences between the dk and the pdk?
@NordicSemi3 роки тому
The PDK is the development kit that use an engineering sample of the nRF5340 SoC, while DK uses the production version of the SoC.
@kushagrapithadiya3203 роки тому
@@NordicSemi Well Explained🥰😊
@kushagrapithadiya3203 роки тому
@@NordicSemi Can I order nRF5340 dev kit? If yes, please share the link. Thanks a bunch in advance.
@kushagrapithadiya3203 роки тому
Does it support usb 3.0? Also will sd140 work the same way?
@1kreature3 роки тому
@@NordicSemi My PDK kits do not have the USB populated next to the SoC. I assume this was not ready yet on the samples?