Introduction to the Zephyr RTOS
Переглядів 43,333
3 роки томуTogether with Zephyr, we would like to give you a comprehensive introduction to the Zephyr Real Time Operating System (RTOS) and some of its main benefits. Register and you will be showcased demos doing a sample build and flashing a sample application to a Nordic board. Before the live panel QA session, we will present the future direction Zephyr is going, its capabilities and structure, as well as discussing some of the development tools that you can use to accelerate your product development.
You should have some embedded programming experience to get the best out of this webinar. Experience developing with Nordic products or RTOS is not a must.
Content:
- Intro to Zephyr RTOS
- Main benefits of Zephyr
- Capabilities and structure
- Technical deep dive
- Demo of West functionality
This webinar was live September 24, 2020 at 9 AM CEST and 5 PM CEST.
The presentation used in the webinar and the live QA can be downloaded here: bit.ly/38Uv4fw
@tsraikage 3 роки тому
i always loved how nordic semiconductor keep in touch with us, mortal people, just users who only want to learn.
@NordicSemi 3 роки тому
Thank you so much for your comment, Tarash. You made our day!
@Mankindux 2 роки тому
Note for everyone: don't forget to turn off notifications before doing an online webinar. 😁
@EdwinFairchild 2 роки тому
This was amazing thank you !!!! , So this is more closer to an Embedded Linux type of OS , as oppose to something like FreeRtos where I just add a few files and continue working in my regular IDE . This seems to be like a higher level type of OS more than a scheduler with tasks and such.
@airfix5857 2 роки тому
Just started to blink led on nrf with zephyr 😂
@ansdfgb 3 роки тому
Great introduction
@NordicSemi 3 роки тому
Thank you!
@bySteVOO 3 роки тому
Great Webinar, thanks for that! I see a lot of Nordic people using VS Code in these videos, but is it possible to fully develop applications solely in VS Code? You know: Building, Flashing, Debugging, Accessing all the source files down to the HAL files e.g. Or is the embedded studio from SEGGER (nordic edition) the only way to fully develop an application in one environment?
@NordicSemi 3 роки тому
Thank you for your feedback! Please use our DevZone to connect directly with our tech support team, they will be able to answer your question: devzone.nordicsemi.com
@wlgrd7052 3 роки тому
You can absolutely dive as deep as you want with VS Code, but it demands more fiddling with the command line than SES. More control, but might be a bit more advanced depending on your experience with CLI.
@Andreasonline3 2 роки тому
awesome video ! i recently got my 53 dk board and was wondering if these more content to digest on the approaches on programming in the new enviroment that is zephyr as i've come from the 52dk / stm32
@NordicSemi 2 роки тому
Thanks! We recommend you to watch our webinar: "Getting started with custom development in nRF Connect SDK" l ukposts.info/have/v-deo/g4OaqoVwepxitXk.html&lc=UgxjdCB5GVVTuI9Cd7N4AaABAg You might find this tutorial on DevZone useful as well: devzone.nordicsemi.com/nordic/nrf-connect-sdk-guides/b/getting-started/posts/nrf-connect-sdk-tutorial---part-1-ncs-v1-4-0
@Andreasonline3 2 роки тому
@@NordicSemi woo thanks. Just in time for the weekend
@NordicSemi 2 роки тому
@@Andreasonline3 Perfect timing! Have a great weekend.
@arjunsinghkalsi9305 3 роки тому
Loved this introductory video. My question is: if i have my project outside of nrf connect directory (zephyr is in nrf connect sdk directory). How can i use West tool. I have been trying with no luck. Thanks
@NordicSemi 3 роки тому
Thank you Arjun. You should reach out to our tech support team on DevZone with your questions, they will be able to help you out: devzone.nordicsemi.com
@NozenPython 18 днів тому
Useful information but the sound quality is very bad.
@turanamo Місяць тому
What ARM926EJS 32-bit board with MMU does Nordic Semi support on Zephyr?
@NordicSemi Місяць тому
We do not support non-Nordic-devices in our SDK. We recommend reaching out to Zephyr on their Discord channel: discord.com/invite/Ck7jw53nU2
@pooyamoradi4278 3 роки тому
At what point should one consider developing the application in Zephyr instead of nRF5 SDK?
@NordicSemi 3 роки тому
Hi Pooya, there is no need to migrate to nRF Connect SDK/Zephyr if you are happy with the current feature set in nRF5 SDK v17, but keep in mind that the nRF5 SDK is currently in maintenance mode, and will not be updated with major new features. For instance, support for Bluetooth 5.1 direction finding and LE Audio in Bluetooth 5.2 will only be supported by nRF Connect SDK. New Nordic devices like the nRF91 and nRF53 Series will also only be supported by nRF Connect SDK, so if you are planning to use Nordic devices in the future you will likely need to migrate at one point.
@wcaeng 3 роки тому
All soc´s is already supported by nRF Connect SDK?
@NordicSemi 3 роки тому
@@wcaeng yes, all the SoC's in the nRF52 Series, nRF53 Series and nRF91 Series. You can read more about the nRF Connect SDK: bit.ly/3kBm0yr
@platin2148 Рік тому
I’m still wondering how i make my own part of hal and drivers? I work with pretty new chips that require there custom protocols..
@NordicSemi Рік тому
Have you seen our Nordic Developer Academy? We recommend taking the nRF Connect SDK Fundamentals to learn more about Zephyr RTOS: academy.nordicsemi.com/courses/nrf-connect-sdk-fundamentals/
@nachiketathakur697 3 роки тому
zephyr ecosystem begins at: 14:37
@EdwinFairchild 2 роки тому
hey would you happen to know if there is a forum or any sort of online community for users to ask questions or have a discussion? they seem to make "community" and important factor, but aside from zephyr developers i have found no other community for users.
@coltennabers634 Рік тому
@@EdwinFairchild subscribe to the mailing list
@bharathkumarmaturu4913 2 роки тому
so how can we install zephyr studio in ubuntu......?
@NordicSemi 2 роки тому
We have a guide on how to install nRF Connect SDK manually on Linux and MacOS: developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/gs_installing.html
@winstonalf 2 роки тому
Can we do debugging through VSCode GUI.. ? Like without doing through commandline. Since there is a plugin in VSCOde named "Cortex-Debug"
@NordicSemi 2 роки тому
You might find this video from Visual Studio Code useful: ukposts.info/have/v-deo/bpOAp66YhXlhl5c.html They also have quite a lot of useful information on their website: code.visualstudio.com/docs/introvideos/debugging
@iunknowncyber8893 Рік тому
sorry i'm newcomer, rpi support Zephyr?
@NordicSemi Рік тому
If you mean Raspberry Pi so yes. For more info, check out: www.zephyrproject.org/raspberry-pi-zephyr-rtos/
@oidpolar6302 3 роки тому
And no mention about FreeRTOS at all?
@NordicSemi 3 роки тому
nRF Connect SDK builds on the Zephyr RTOS to provide best in class functionality. It is however also possible to combine our RTOS-independent HAL and driver layer, nrfx, with another RTOS like FreeRTOS.
@oidpolar6302 3 роки тому
@@NordicSemi zephyr support for nrf4350dk is weak. Only examples are compilable. There is no option to create new project for zephyr provided in Nordic ses clone. There is no impact on zephyr configuration using nrf connect configurator
@NordicSemi 3 роки тому
@@oidpolar6302we appreciate feedback on our products. If you could please post on our DevZone with more information for us to evaluate the Zephyr support we offer at the moment. Thank you. devzone.nordicsemi.com
@user-yb9yr2wu8v Рік тому
受益匪浅.
@kippie80 2 роки тому
You lost me at "without further todo".
@NozenPython 18 днів тому
Useful information but the sound quality is very bad.
The Zephyr Project
Переглядів 7 тис.
УПЛ ТБ
Переглядів 214 тис.
Супермама
Переглядів 1,1 млн
Sergio Prado
Переглядів 2,5 тис.
The Pull-up Resistor Channel
Переглядів 2,7 тис.
The Linux Foundation
Переглядів 8 тис.
MaxxPC
Переглядів 2,2 млн
Lemon Films 檸檬職人探索頻道
Переглядів 3,5 млн
notebook-31
Переглядів 124 тис.